LED Neon sign Easy

Рет қаралды 180,513

2 жыл бұрын

This is my first real time video. I do also have other videos that go more in-depth in the products and technique used.
/ makerdecor_
www.etsy.com/shop/MakerDecor
The links below are Amazon Affiliate Links and I may receive a small fee if items are purchased through links.
LINKS BELOW
makerdecorations.com/tools/
makerdecorations.com/led-link...
makerdecorations.com/led-links/
Neon LED Strip amzn.to/3oHFPbN
Power Supply amzn.to/3cVNrEV
2-pin Light Strip Connectors amzn.to/3vryzF2
Neon LED Strip Light amzn.to/3oKzI6K
2-Pin 8mm LED Strip to Wire Connector amzn.to/3oIce1U
20 Gauge 2 Conductors Red Black Wire amzn.to/3JhzJIR
22AWG Wire Cord for Single Color LED Strips amzn.to/3PPZWkd
10Ft Outdoor String Lights with 11 Clear Edison Bulbs amzn.to/3BsNpPi
Wire Stripper 10-22 AWG Wire Splicer Cable amzn.to/3St3vyD
Utility Knife Box Cutters amzn.to/3zMuttx
Gorilla Super Glue Gel amzn.to/3zptqye
Solderless LED Tape Light Connector amzn.to/3zhuJzg
RYOBI One Jigsaw amzn.to/3cX9tr5
Ryobi Airstrike Brad Nailer Kit amzn.to/3Q5kF3L
Ryobi 16 in. Corded Scroll Saw amzn.to/3OOdf3g
Panasonic LUMIX GH5 4K Mirrorless Camera amzn.to/3cPUD5D
Kreg Pocket-Hole Jig 520PRO amzn.to/3zeMT4I
Pipe and Drape System amzn.to/3PUxWfd
Faux Pampas Grass amzn.to/3Qa1h53
Balloon Blower Pump amzn.to/3BAgJ6q
Decorative Vintage Wood Garden Wagon Wheel amzn.to/3PRbTG6
Sanding Sponge amzn.to/3SfbMps
Trigger Clamp Set amzn.to/3BEzgOS
RYOBI 18V Brushless Cordless Circular Saw amzn.to/3POjCVB
Ryobi Cordless 2-Tool Combo Kit amzn.to/3OIMRaY
90 Degree Corner Clamp amzn.to/3bltIy4
12 Pieces 20"x 20" Artificial Boxwood grass amzn.to/3zGFueT
Steel Spring Clamp amzn.to/3oFT9h7

Пікірлер: 171

@watutawestbrook8242 2 жыл бұрын

Thank you for doing this for us that requested it..You are truly AMAZING and patient..especially when you are dealing with a lot of women..lol..I have purchased everything and I believe I am ready to start this project.

@MakerDecor 2 жыл бұрын

Thank you so much for your comment. Good luck and let me know if you have any questions!

@montegosmith8259 Жыл бұрын

Thanks for sharing, and showing how one can make such a beautiful sign. Really appreciated.

@MakerDecor Жыл бұрын

Thank you, glad I could help!

@stephaniegoodrich212 Жыл бұрын

This is awesome... I' going to buy you a sharper knife... I was stressing.... hahaha... Thanks for sharing!

@MakerDecor Жыл бұрын

lol, I know. Thanks so much for watching!!

@andreacline7141 2 жыл бұрын

This is an awesome project. So many ideas come to mind. I will maybe try this for a wedding coming up. Thanks so much for sharing your ideas.

@MakerDecor 2 жыл бұрын

Thank you!

@shepherdmavhenge655 Жыл бұрын

@@MakerDecor 1

@AyeYoJazz 2 жыл бұрын

WOAAAAAAH IN 25 MINUTES??! 🤯👏🏽👏🏽👏🏽👏🏽🔥 Okay forget it I'm definitely trying this soon 😍 Great video!!

@Cooking4me_928 Жыл бұрын

Thankyou for making this video. Appreciate every detail.

@MakerDecor Жыл бұрын

Thank you for watching!

@derricktinsley9461 Жыл бұрын

@@MakerDecor what thickness of clear plastic do you use?

@jessiebuxton1691 Жыл бұрын

❤❤❤ your the only person I found that has a tutorial. Thank you!

@MakerDecor Жыл бұрын

Thank you for watching glad this video has helped you!

@beverlybogues9608 8 ай бұрын

I've never done anything like this or probably won't😂 but your video was very interesting. I like the way you showed how things can go wrong && you fixed it. You did an excellent job on the sign && the video. Sometimes, people would rather see the live instead of pre-recorded.

@robinrobin9173 2 жыл бұрын

Thank you so much for the second video... Much more detailed! You did an amazing Job! 🤗

@MakerDecor 2 жыл бұрын

Your welcome, thank you for watching!

@arlenedevroy1110 Жыл бұрын

This is a great video. Thanks so much.

@MakerDecor Жыл бұрын

Thank you for watching and commenting!

@edelchadwick 9 ай бұрын

Thank you so much for this, you make it look easy!

@gaminisarath9719 8 ай бұрын

Pß8

@Trappintatts Ай бұрын

preciate this bro. proving all heros dont wear capes lol

@edwardzziwa4227 Жыл бұрын

Thanks , this is great work

@MakerDecor Жыл бұрын

Thank you very much!

@IvanPerez-cg6le 5 ай бұрын

Did the gorilla glue hold up!?

@JoseGonzalez-sp3lp 2 жыл бұрын

Nice video!

@sarahlihs Жыл бұрын

such a great explantation this helped a lot !!

@MakerDecor Жыл бұрын

Awesome, thank you and good luck!

@judichristopher4604 Жыл бұрын

EXCELLENT VIDEO... Beautifully done... Thank you for telling me about your other videos...

@sslight Жыл бұрын

wow good~~👍👍👍

@sharilyntuttle6984 2 жыл бұрын

thank you for the informative videos!! i’ve really enjoyed them. have you ever tried color changing LED’s before? do you recommend a specific brand for the LEDs?

@MakerDecor 2 жыл бұрын

Hi thanks so much for watching. I have not tried the color changing lights yet. But I am hoping to soon. And I just used the basic LEDs from Amazon but I am sure most will work well as long as they have good reviews. I have a link of the ones I used in the description above. Thank you!

@staceyclear6477 2 жыл бұрын

Hi there! Watching your videos and almost ready to start my project! Thank you for the link to the clips. Question: Have an idea of how many feet you used for the "Bride to Be" and "Wild One"?? Also, I bought the same brand wire but 16 gauge! Think it will still work?

@MakerDecor 2 жыл бұрын

Hi thanks for watching. For the bride to be I used most of the wire because I back tracked some of the letters to save time making extra connections. The wild one I had a good amount left. 16 gauge might be a little difficult as it is thicker then I used. I mostly used 20,22 and 24 gauge wire as they fit into the clips better. I would make sure to strip the wire of the rubber at the end to help make sure it fits in the clip. Not sure if it will work but maybe worth a shot. Thank you.

@eviele2200 8 ай бұрын

hi there! love your videos on the led signs & thank you for your videos! i am inspired to make some myself.. although i am hesitant on the soddering because god forbid i burn myself lol. have you tried soddering one yet? if so, can you make a tutorial on that and how to make an extra seamless sign without the connectors leaving a gap in between the design?

@carrolbrooks2143 Жыл бұрын

Drilling Acrylic Works MUCH BETTER with The Right Angled Drill Bit!?!! 😉🙃

@MakerDecor Жыл бұрын

lol, yes

@user-xj4wf7vw8z Жыл бұрын

Once your piece is done how do you hang it usually? Such a great video. It was so awesome to see you problem solve and not cut it out. ❤

@MakerDecor Жыл бұрын

Thank you for watching! I usually drill two holes in the top corners. Then use fishing string which is clear and strong to hold up the sign.

@jcjab1able 2 жыл бұрын

Amazing! Can you plsss do a Havana Nights LED sign next

@didalifeneonsign3915 Жыл бұрын

I am a manufacturer of neon signs, I have my own shop, which can help you make neon signs

@floriselacampos6575 Жыл бұрын

Fyi if you take the tip of that long blade you are using and snap it from the sections that are partially cut you will get a fresh tip those blades are ment to break off to give you fresh blade tips until used up if you need more info there's videos showing it under "bet you didn't know..." blades as a keyword, use pliers to break off dull piece of blade.

@MakerDecor Жыл бұрын

Thank you, I have tried it and it scares me so much trying to break them LOL. Yeah ima chicken with snapping those things. Thanks for the tip!

@kristinoliver Жыл бұрын

Thanks for the detailed tutorial! I'm making a sign to hang on a stage as a prop and don't want it too heavy. Do you think it would it work to use heavy cardboard instead of the plexiglass to reduce the overall weight?

@MakerDecor Жыл бұрын

hmmmm? I think it might work, not sure how it would look out of cardboard or if it is safe? Good luck

@manahilsaid2207 2 жыл бұрын

Thank you so much for this video. Where did you get the white wire (that was mixed with the red wire) from? Or what is it called so I can look for it online. Thanks I appreciate it

@MakerDecor 2 жыл бұрын

Hi thanks for watching. The wire I used for this one was actually door bell wire from Lowe's but they have the same one at Home Depot as well. I believe it is 24 gauge? But if you just look for door bell wire it will be there, it is the smallest gauge (thinnest wire) they carry. Everything else at the department stores would be too thick.

@tkenney3540 Жыл бұрын

Thank you for the information, looking to try this for a birthday party. What size drill bit?

@MakerDecor Жыл бұрын

Hi, thank you. Umm I cant remember the drill bit but the smallest possible. Just because the bigger always increases the chance of cracking. Thanks for watching and good luck!

@josiecantey3814 2 жыл бұрын

Hey! Love the video. I was wondering what size drill bit you used?

@MakerDecor 2 жыл бұрын

Hi, thank you so much. Honesty I do not remember, been a minute. But I just got the wire and made it just bigger than the wire so it would not get stuck pushing through and turning. Just be careful it is always nerve wrecking drilling through plexi-glass. I am putting together a video soon on cutting and drilling plexi-glass. It should be out next week. Thanks, hope this helps.

@JesusRamirez-bo2nm Жыл бұрын

thank you ive been using lots of different glues but yours seems to work very nicely, any tips to clean up mess?

@MakerDecor Жыл бұрын

Hi, thanks. The first sign I made made a mess with the glue. I used alcohol wipes and was able to get most of it off with some work. But that just taught me to be very cautious on how much glue I use and try my best not to spread it any more. Less glue less mess to clean up. Good luck

@JesusRamirez-bo2nm Жыл бұрын

@@MakerDecor now i do it totally different, i have a metal sheet, and cubed strong magnets, i put the picture down and start laying the strip face down and shape with magnets, once im finished i apply marine silicone rtv and i make sure to make the holes before where they go then i simply feed the wire and let it down slowly then i press witj clamps and next days its there and what used to take me hours now tskes me 50 minutes

@MakerDecor Жыл бұрын

@@JesusRamirez-bo2nm Awesome!

@Whoooora2024 7 ай бұрын

What program / app do you use to print designs or text on paper, so you can tape them together to fit on the different sizes of plexiglass you use ?

@justine7538 2 жыл бұрын

Wowww! You’re so talented. I was wondering if you could sell a custom name template for me to print. I would love to create a sign with my business name.

@MakerDecor 2 жыл бұрын

Hi thank you so much for your comment. I am hoping to add that option to our Etsy store in a month or so, just cause I have a lot of plans coming up. If you don't see it on our Etsy store soon, message me on Instagram. The links are in the description, Thank you.

@ambrother997 Жыл бұрын

nice

@MakerDecor Жыл бұрын

Thank you!

@Str0keG0d 5 ай бұрын

Awesome guide video! Definitely going to use this idea for some decorations in the kiddo's room! I only have one question, does this work the same with the "rgb" style lights the same manufacturer of the strips used in the video as opposed to the single solid colors?

@magaidhbussellbeesley1161 Жыл бұрын

Do you have links for materials by chance?

@marleyraymond451 Жыл бұрын

Good day, could you let me know what you do with the wires in the back of the frame after drilling holes? Thank you

@MakerDecor Жыл бұрын

Hi, I try to bend them or glue them behind the lights in the front. That way when I turn on the lights in the front, they hide the wires in the back.

@1gerger1 Жыл бұрын

this sooo cool in real time, great job, what power source lights this up> USB connector or 110 house plug? GREAT JOB MD,,,

@MakerDecor Жыл бұрын

Thank you, I used 110.

@MakerDecor Жыл бұрын

@@jamyDodger Hi, yes the power supply is needed. This is the one I used. Power Supply amzn.to/3cVNrEV or you can look up LED power supply on Amazon as well. Good luck

@nalinchawda 3 ай бұрын

You could nicely overlap the prints on paper to match exact figure ....there is margin to be covered😊

@juelleroc1894 2 жыл бұрын

Hi. I love your designs and videos. How do you make your template?

@MakerDecor 2 жыл бұрын

Hi thanks for watching. This template I just made it on Canvas, separated it into 2 papers and printed out separate sheets. Then taped together.

@JohnnyLawNews 2 жыл бұрын

Before I buy the 2 pin adapters are the the ones in the link provided below the same ones you used in this video? On the picture on the Amazon listing it shows them being used for regular/old school led lights worried the neon light ones may be to think you fit

@JohnnyLawNews 2 жыл бұрын

Just saw your video on a closer look at connectors and what not 😎 thanks so much you a G

@MakerDecor 2 жыл бұрын

@@JohnnyLawNews lol thanks, there mostly the same just as long as the amount of connectors pins is the same amount of copper connections in the wire it should work. I am doing a video soon on a multi colored LED and I believe it has like 3 or 4 pin connectors because the wire has 3 or 4 copper connections. Hopefully it works and should be up in a week or so.

@reneemchenry3748 Ай бұрын

How do you make multiple connections? How do you hide the power in the back not front?

@MichaelR1975 6 ай бұрын

get you a 3d printer then you can just print the backing leaving 6mm gap which the led strips fit perfectly in. are the neon strips you are using 12mm wide? mine are 6 thick and 12 wide I believe I am trying to figure out what connecters to buy. I see in the links you were using the 8mm ive seen 8,10 and 12. I bought 10 for dc females hopefully they fit.

@craftsmadepersonal1096 7 ай бұрын

Do you find that the gorilla glue leaves a hazy look on the acrylic?

@davidramirez8450 10 ай бұрын

Would soldering be more cost effective?

@tberisic Жыл бұрын

Hello very good. I really like it. If only they could turn on and off one after the other. eg two bells.

@MakerDecor Жыл бұрын

I have seen people add switches to them. But I haven't tried that, hopefully soon.

@steviemccoy9407 Жыл бұрын

How do we connect a powder connector cord ( the round port) to an already cut led strip? I’m making a new sign but I don’t have the start piece that’s at the beginning of a new strip. Please help!!!

@MakerDecor Жыл бұрын

Hi, if you buy a new piece it already has it connected at the beginning. But you can connect one if you already have one of the round ports available. If not you will have to order them. They do sell the on Amazon. All you are going to do is get the two wires make sure you connecting the positive and negative wires to either a clip connector as in the video or you will have to solder the connection. I do not have a video on it. But I do believe they do have some on KZfaq showing the topic. It is simple but you do want to make sure you make the right connections and seal it together. Sorry I could not be of more help and good luck.

@stevenrogers3115 Жыл бұрын

Hi, question about where to cut the flex: do you only have to cut on the black dots for purposes of making wiring connections, or do you have to always cut on the black line no matter what? In other words, if you're simply cutting the flex tubing because that is where you want the end of the piece, and you're not going to make another connection with the clips there, can you then cut it wherever you want? Or will it not light up if yo don't cut at the black dots? Thanks!

@MakerDecor Жыл бұрын

Hi, you are correct. You can cut it anywhere. But if you want it to light up then you have to cut it on the black dots. But say you make a sign and you need it to end at a spot that does not have the black dots. You can just cut it anywhere. But you will not be able connect after that cut. You are right, good luck!

@stevenrogers3115 Жыл бұрын

@@MakerDecor thanks!

@stevenrogers3115 Жыл бұрын

@@MakerDecor quick followup: I don't have tools to cut plexiglass/ acryllic to the shape of the sign. however, I know sometimes a box cutter can be used to score acryllic and then break it along where it was scored. what thickness acryllic do you think I could use that would be able to be scored and snapped with a box cutter? thanks again!

@MakerDecor Жыл бұрын

@@stevenrogers3115 hmm. that may be difficult as the plexiglass I use is the .220 thickness which is kinda thick compared to other thinner plexi glass available. I would not think scoring and braking with a box cutter would work with the thickness. You can try thinner plexi glass but not sure how it would work putting the LED sign on it? good luck

@stevenrogers3115 Жыл бұрын

@@MakerDecor got it, thanks again!

@PartRobotmusic 2 жыл бұрын

Where do you get your plexiglass? Seems expensive where I'm finding it.

@MakerDecor 2 жыл бұрын

Hi thanks for watching. I got this one from Home depot. It was the thin one and was around $15. The one I usually use is thicker at .220 and I believe 24in x 30 in. That one usually costs $35 at Home Depot. I am not sure if the prices have gone up because I never bought plexi glass before Covid? And I know now, they use it alot. but for now when compared to purchasing a Neon LED sign which can be easily over $100 or $200 depending on size, it will do. You can try a couple different hardware stores but prices will vary due to location. Hope this helps.

@PartRobotmusic 2 жыл бұрын

@@MakerDecor thanks so much!

@clarissasgarden2372 Жыл бұрын

I followed your instructions and the sign came out beautifully. I came back the next day and found a chalky residue on it, is that normal? And can you advise me on what to do, I really need your help, thank you 😀

@MakerDecor Жыл бұрын

Hi, most likely it is the excess glue residue. I did that to my first sign. I used more glue than necessary because I wanted to be sure it wouldn't move. To clean off the excess glue I used alcohol wipes. It took a while but worked. After that I made sure to manage the glue better to avoid it smearing. Good luck!

@mariafernanda-vk6fg Жыл бұрын

Que pegante me recomiendan gracias

@MakerDecor Жыл бұрын

superpegamento funciona con estas luces específicas.

@itsjessicavictoria8834 Жыл бұрын

Is there a such thing as a battery powered adapter for these so I don't have to plug it in?

@MakerDecor Жыл бұрын

Hi, I am not sure but I do not believe so. I am sorry. Thanks for watching!

@highlineinternational9843 Жыл бұрын

How do you make the templates? I want to make a sign about 5' wide and 2' tall. How do I make the template?

@latoyanero3181 2 жыл бұрын

Where do you get the clear boards are they acrylic?

@MakerDecor 2 жыл бұрын

Hi thanks for watching. Yes the are acrylic and I bought them from Home Depot.

@xxParachutexx Жыл бұрын

How do you make your template cut out in different pieces of paper to be able to tape together?

@MakerDecor Жыл бұрын

The easiest way is just using the printer settings and switch the settings to poster. Then the amount of pages you want your image stretched across. Most printers have those settings. The other options are photoshop or inkscape. Which are more complicated and I do not really have it down enough. It usually takes me some time to create one through trial and error. Good luck

@vacevedo15625 5 ай бұрын

Do you have a certain website you get your balloons from ?

@barelyalextv Жыл бұрын

Is it possible for you to list which things you need for this? I see your big list but there are things on there for other projects so I'm a bit confused.

@MakerDecor Жыл бұрын

Hi, sorry about that. I will try to organize that a little better. It is confusing. Thank you

@doziechinanuekpere7692 4 ай бұрын

How did u get the design love? You printed it out????

@gilliansamuel9473 2 жыл бұрын

Can you let us know the materials name you used. the one where you plug in, I don't know what to search for.

@MakerDecor 2 жыл бұрын

Hi thanks for watching, I updated the description to include these products. Some times the links stop working so just copy and past from the description into Amazon and you should get something similar to pop up. I used these (2 Pin 8mm LED Strip to Wire Connector Unwired Clips Solderless Adapter Terminal Extension Connection) from amazon as the small clear connectors. Make sure you have the (LEDMO Power Supply, Transformers, LED Adapter, 12V, 5A Max, 60 Watt Max, for LED Strip) I got this one from amazon but you could use any power adapter with those specifications. Or this description as well. 2-Pin 8mm COB LED Strip to Wire Connector Unwired Clips Solderless Adapter Terminal Extension Connection for High Density LED Strip Lights 12V 24V (Pack of 10)

@jessicamartinez132 2 жыл бұрын

Can you link the led cable that you bought off amazon?

@MakerDecor 2 жыл бұрын

Hi thanks for watching, I have updated the description above to include a link and product description as some times the links stop working. Thank you. amzn.to/3FTuw7t

@gauss2025 2 жыл бұрын

hello, a question, what kind of wire do you use to connect the led strips? I guess it's copper, but what thickness?

@MakerDecor 2 жыл бұрын

I have used 20-24 gauge wire. The one that I use most often is probably 22 gauge thickness

@zoeyliu1496 Жыл бұрын

Hello ,this is zoey from china .Our factory is the main led light strip manufacturer in china .I'm happy to help you with any questions you may have about light strips

@nalinchawda 3 ай бұрын

@@zoeyliu1496 plz frwd the link

@jessicamartinez132 2 жыл бұрын

How can you tell what side is the right side? Can you show us a pic on the gram? Or how can you tell?

@MakerDecor 2 жыл бұрын

Hi, for me it like a battery with positive and negative. So however you start the first wires you want to keep that same when connecting to the next plastic connector. So it will keep positive and negative going down the line. It does help using two different colored wires like white and red so you can keep track which one goes where. But I chose to use just white because when I used white and red last time you could kinda see the red and it bugged me. So I just used the white and knew if it was backwards then to just flip the wires and it will work. That is probably the only hard part is making sure you have a good connection with those clips. I also have another video titled "Closer look at LED Neon connectors, solderless NEON LED signs" which shows a better look at the connectors, thank you.

@diannebonnes6862 5 ай бұрын

Have u a website to order from?

@chrisfrost3067 11 ай бұрын

Do you have a link to your suggested neon lights on Amazon? My students want to try this in class this year.

@DiamonderVT 9 ай бұрын

Check the video description

@o.lidias.d2336 11 ай бұрын

Amazing tutorial I will attempt this! How much is the plexiglass?

@MakerDecor 10 ай бұрын

I just get mine at Home depot. I use the .22 thickness. If you use the thinner one it wont work as well because it is too flimsy.

@Thecraftyroom Жыл бұрын

Great video I want to make me a sign. Two questions what is the black piece connected to the wire and how did you get that piece on the wire? Also what’s the name of the other black piece you used to light it up?what would a customer need is that a USB cord or something? Sorry hope you understand my questions lol 😂

@MakerDecor Жыл бұрын

Hi, that is the power supply. It is purchased seperate, and the other thing comes attached to the end of the LED strip. You can buy them and add them if you need extra. It is not a USB cord, it requires the 12 v power supply. Thanks for watching!

@francelate9488 Жыл бұрын

Are you using a female dc and connector to power it?

@saraimurillo1185 11 ай бұрын

How much would you charge for a sign that reads (Candy Bar )and and another sign that reads (Sweet Baby Girl )

@MakerDecor 11 ай бұрын

Hi, sorry I do not create LED signs for sale. Thank you

@fordperfect1227 Жыл бұрын

using a plastics drill bit should avoid cracking I think

@MakerDecor Жыл бұрын

Yeah, I just used the basic ones I had on hand. I'll look into it. Thanks for the tip!

@Scratchthejeepguy Жыл бұрын

How thick of plexiglass do you use?

@MakerDecor Жыл бұрын

Hi, .220 is the thickness from Home Depot I used.

@mgfpresentespersonalizados Жыл бұрын

👏👏👏👏👏💯💯🇧🇷🇧🇷

@MakerDecor Жыл бұрын

Thank you!

@artmedia1217 Жыл бұрын

do you use COREL DRAW ?

@MakerDecor Жыл бұрын

Hi, I do not use corel draw. I really haven't heard about it. I may have to check it out. I use a couple of things. Photoshop, Inkscape and Canvas. I am not that great with software, but learning more.

@katerinecastaneda7236 Жыл бұрын

could you put the link to buy the materials I can't find it thanks and nice job

@MakerDecor Жыл бұрын

Hi, thank you. I have updated the links to be shown in the description above. Please let me know if you are not able to access them. Thanks

@katerinecastaneda7236 Жыл бұрын

@@MakerDecor don't go to the links but I get tools and nothing else😁....counting on the fact that technology is not much for me. Thank you

@user-lw8dw9ck7p 4 ай бұрын

Please list the components for this neon led sign

@twilyumz 2 жыл бұрын

Can they blink or react to music?

@MakerDecor 2 жыл бұрын

Hi thanks for watching. These do not, I do believe they sell some that change colors and blink, but I have not tried those.

@loganz 8 ай бұрын

Could you possibly just solder the wires to the strips for a cleaner look?

@dream__boy_jimin___ Жыл бұрын

Hello what is the glass name

@MakerDecor Жыл бұрын

hi, its acrylic or plexi glass

@dream__boy_jimin___ Жыл бұрын

Thank you so much brother 😊😊😊

@latoyanero3181 2 жыл бұрын

I need to know gow to make these please

@MakerDecor 2 жыл бұрын

Hi thanks for watching. I have a couple of LED videos that go more in-depth on some the topics.

@jcortes3930 Жыл бұрын

What about hot glue?

@BHShaman Жыл бұрын

Is your parts list missing the female power pigtail?

@MakerDecor Жыл бұрын

Hi, the neon lights I purchase have the female power pigtail already attached to the light at the beginning. You can purchase extra if you are going to re use the extra neon line left after making one sign. Because it only comes with the one attached to the line.

@BHShaman Жыл бұрын

@@MakerDecor thanks for reply!

@HeavenlyFlowers313 Жыл бұрын

May have the name of a class or workshop that teach this please?

@MakerDecor Жыл бұрын

Hi, sorry I do not know of any. Good luck

@AyeYoJazz 2 жыл бұрын

Wait how the heck do the 2 white wires you cut work without needing the red?? Lol 🤔🤔

@MakerDecor 2 жыл бұрын

Really, their is no difference in the red and white wires. They are wires that are just color coated. They are simply a different color so you know which connection is positive and negative once connected. Really there is only two wires, so if you put one connection together and it doesn't light up then you know you have the negative and positive mixed and just switch them up. I did the only white to try to hide seeing the red wire easily. But you can use the Red and White if you prefer, it was just to see the difference. Thanks for watching!

@neon_led4you Жыл бұрын

Gorilla glue Are you satisfied fast and solid glue

@MakerDecor Жыл бұрын

Hi, Gorilla glue works well with some LED lights but not all. The one in the link is the one I used the most because it has always worked for me, some brands take a while to hold or its not as strong.

@multicomputerservice 2 жыл бұрын

Hello I want to see more video that you show I am confused.

@MakerDecor 2 жыл бұрын

Hi, thanks for watching. I have a couple of videos on the LEDs. Here is a link to one that shows the connections more clearly. kzfaq.info/get/bejne/meB8n8R5tdaYiYE.html

@lightpainting_by_jross 20 күн бұрын

None of your affiliate links are working.

@MakerDecor 17 күн бұрын

I am sorry about that, I will update this weekend. Thank you very much for notifying me.

@TheDarknessOfNun Жыл бұрын

How did you even clean off the excess glue? I appreciate the upload but I'm going to consider this as a " what not to do " video

@MakerDecor Жыл бұрын

lol, thanks for watching

@saraimurillo1185 11 ай бұрын

We’re are you located or what’s you number?

@madhuvn5893 7 ай бұрын

ഇവനെ ഈ വർക്ക് അറിയില്ല

@aquascrubofficial 2 жыл бұрын

“You should be very careful” proceeds to violently cut

@MakerDecor 2 жыл бұрын

Yes definitely be safe.

@tinytentacle3571 2 ай бұрын

don't use E6000 it doesn't work for shit

@MakerDecor 2 ай бұрын

lol, I know I have tried E6000 for a lot of projects. Never works for me and just makes a mess. I don't touch the stuff. But I have heard some people do?