DIY Poor Mans Ironworker Part 2 - Uni-body Leveling Mobile Base

Рет қаралды 31,833

6 жыл бұрын

This is part 2 of our DIY Poor mans Ironworker build. Check the playlists for other videos in this series. In this one we are building a mobile cart or base wiht adjustable leveling feet so we can really dial in the height to perfectly match the edge of our welding table.. We used some 1-1/4" threaded rod and nuts to create the leveling feet, along with some roller bearing guides that we purchased from harbor freight.
Here is the playlist for all of hte videos in this series.
• DIY IRONWORKER BUILD
We are ultimately going to be using a harbor freight trailer jack and pipe threader to provide the linear actuation of the knife cutting action. You obviously could do a hydraulic jack or some other type of air or electric over hydraulic to provide the pressure. DIY Metal Cutter.
DIY Steel cutter
Behind the Scenes KZfaq Channel: / @oldbarnhomestead

Пікірлер: 19

@purplebooger6410 8 ай бұрын

The one part that you plasma cut out looked like the key to one eyed Willy’s treasure!😂

@rayeddy528 6 жыл бұрын

Coming together nicely Gary !!! Thank you my friend for taking us along !!! Be safe and may God richly bless you and yours !!!!! Eddy

@turbocobra 6 жыл бұрын

Thanks Eddy!

@cecil6711 6 жыл бұрын

It looks very heavy duty. :-)

@turbocobra 6 жыл бұрын

Thanks Cecil!

@Daniel-vq9zb 6 жыл бұрын

Cool project, a kit for a diy belt grinder similar to the one you have would probably sell very well

@turbocobra 6 жыл бұрын

yes, definitely. There are already a few out there that look pretty good, so may not make one of those, but this thing is going to be unique, haven't seen anyone else offer anything like it yet

@chrisnichols9830 6 жыл бұрын

sub'd... good video

@CGT80 6 жыл бұрын

Your brackets look great. I'm still learning on my cnc plasma and need to get better at getting perpendicular edges on the plate, using the hypertherm 65. My recent personal projects have been made with scrap I either had left from jobs for others, or remnants I pickup at the big steel supplier because they catch my eye and look like they would work for various projects. It does keep the out of pocket expense lower and uses up material that is otherwise just waste. Did you consider a three leg stand.......like a tripod? That teetering of a 4 leg stand is a familiar sight. My welding table is a few fab blocks bolted together and set on a frame that I built with adjustable legs, so it does not wobble. My blast cabinet and horizontal compressor aren't adjustable and they do wobble on the concrete. For my table, I made work stops/pins with 5/8" rod and collar stops. You can set them in an L pattern and square two sides of your tube frame and clamp the tube to the table, then use squares for the other two tubes. Great video!

@turbocobra 6 жыл бұрын

Thanks man, yea I actually did think about a 3 point cart. if its done right and you have the right footprint dimension on the base i think it can work well and eliminate the rocking from weld warpage. The main reason I made the cart adjustable was to be able to get the level of it, at the same level as the table so I can slide things off the edge of the table over onto the shear and trim things up, etc

@paulc9395 6 жыл бұрын

I'll be curious to see if the harbor freight casters hold up. I hope so as it seems like a good solution

@turbocobra 6 жыл бұрын

I think it will be fine, This is mostly going to be a stationary cart, and doesn't have alot of weight on it. Thanks Paul

@ahlen10 3 жыл бұрын

What's your definition of "poor man"?

@johnw.peterson4311 5 жыл бұрын

“ A poor mans project” made with $75k worth of equipment. Lol. Good work however.

@daviddaddy 6 жыл бұрын

What was the name of the fellow who gave you the Clamps? Reid something?

@turbocobra 6 жыл бұрын

Yes, Reid Eichner, you can look him up on facebook or instagram

@daviddaddy 6 жыл бұрын

Ramsey Customs - turbocobra Oh, ok Thank you for Getting back to me. I was Hoping he had a fabricating Channel on here lol so i could watch his videos, as i really enjoy Yours and figured he had some good videos as well. Oh well , no biggie haha Take Care.