Dump trailer BUILD (without hydraulics)

Рет қаралды 10,462,869

3 жыл бұрын

In this video I make a small dump trailer using a 12V winch.
For some time we have been changing the barn into a "new" workshop in our spare time. There is a lot to do there and that's why I decided to build this trailer to speedup and facilitate earthworks.
It will definitely be useful for transporting firewood for the winter, carrying heavy things and many other works.
I think I was exaggerating a bit with the weight of the trailer, because it weighs over 100 kg, but at least it's solid :)
The winch used in this design works well, although it could be a little stronger.
I did not give an additional battery because the tractor has a 26 ah gel battery and it is a sufficient power source.
Some homemade tools used when building this project:
• Big Vise using Bottle ... - Hydraulic Bench Vise
• The easiest way to cut... - Chop saw
• DIY Belt Grinder 2x48"... - DIY Belt Grinder 2x48

Пікірлер: 1 500

@mateuszlis7741 3 жыл бұрын

Wszystkie Twoje wstawki oglądam z uśmiechem na twarzy. Super pomysły, można się wiele nauczyć. Oby tak dalej. Pozdrawiam

@chaineffect6437 3 жыл бұрын

Not one aspect lacked attention to detail/function! PERFECT. This must be a gratifying build to have done, able to use

@siswhadicml8312 3 жыл бұрын

&&yyyy66&6

@tjgrant3124 Жыл бұрын

Elevator mechanic here, #1 rule with crosbys,...never saddle a dead horse. Saddle always goes on the live side of the cable. Nice work brother 👏, great craftsmanship!!!

@bobw7066 3 жыл бұрын

I am a retied mechanical engineer in Australia, this is an excellent job of building a small tipping trailer. I however would have installed the axle about 150mm towards the rear of the trailer, it would tow better and put some weight on to the tow ball for more traction on the towing machine. Five stars

@snobear41 3 жыл бұрын

As a young man i worked as a welder/fabricator- serious skills dude! SOOOOO jealous of your shop

@revdcdon970 3 жыл бұрын

It is a real pleasure to see someone as talented as you, who shared your skills and knowledge doing this project. Thank You. Our world needs more like you.

@ochotnik3219 2 жыл бұрын

Twoje wykonawstwo ociera się o geniusz ! chylę czoła i życzę dalszych pomysłów ku uciesze oglądających

@gotternxxx5992 3 жыл бұрын

Jak dla mnie naprawdę gratuluję talentu... którym jest twoja mądrość. Wielki szacunek.

@cjzx325 3 жыл бұрын

Brilliant build! I like that you created your own snatch block for the winch lift. Doubled your lifting capacity!

@jmtx. 3 жыл бұрын

Thank you for sharing another awesome build!

@rafaantczak3050 3 жыл бұрын

Jak zwykle genialny pomysł 👨‍🏭 czekam na kolejne projekty

@kmech3rd 3 жыл бұрын

Absolutely love that saw machine. The way it eats steel tube is SO satisfying.

@victorriceroni8455 3 жыл бұрын

I thought of that same mechanism a couple of years ago. I am terribly glad to see it works. Very well done.

@DanKoning777 3 жыл бұрын

Some time ago I thought: *"one of these days he's gonna make something thats not very satisfying"* *I STOPPED THINKING THAT QUITE A FEW PROJECTS AGO.* Well done............ *again.*

@gabrielruvalcaba2310 3 жыл бұрын

True genius.. I've seen some other trailers that won't even dump that size of load. Also my compliments on that tractor belt driven and has balls to pull through.

@davidbridge3542 3 жыл бұрын

Very good skill set. Just shows with the right kit and the training to go with it everything looks easy. Pleasure to watch.

@roma_romashkin 3 жыл бұрын

Made in Poland and Make it Extreme is the best channels on KZfaq with cool inventions and DIY. Thanks!

@marinijaish 3 жыл бұрын

Also try this old tony and workshop from scratch

@peterstabel753 3 жыл бұрын

And Donn DIY

@carineservrankcx8289 3 жыл бұрын

@@peterstabel753äääääaaääaaaäaaaaa1aaa

@apphead41 3 жыл бұрын

And colinfurze

@bengkeldinamotel7769 3 жыл бұрын

😁 yes make it extreme

@Xlaxsauce 3 жыл бұрын

If you weld chains to your gate and chain hooks on both sides of the bucket. you can control how much the gate opens to help control the flow of dirt out of the trailer.

@rongeernaert1208 3 жыл бұрын

Piękny wózek z wywrotem i dużo pracy z rąk

@mkud7045 3 жыл бұрын

Jak ktoś już napisał: briliant. Fantastyczny jesteś w swojej pracowitości i pomysłach.

@_zzpza 3 жыл бұрын

Top notch craftsmanship as always. Very good cable management, the box within a box idea is genius!

@kentuckytrapper780 3 жыл бұрын

You can make mine red or blue, great job man. Love the cut off saw. You do excellent work.

@thomasingle1333 3 жыл бұрын

That is an excellent build. I really enjoyed watching it. Thank you.

@h.m1618 Жыл бұрын

Super wykonanie przyczepki,gratuluję pomysłu !!!.

@trakers3 3 жыл бұрын

Witam. Ale Ci poszło z tą przyczepką, super wykonanie jak zawsze! Pozdrowionka!!!! :-)

@user-pw7fn1lz6l 3 жыл бұрын

Witam. Oglądam twoje filmy tak, jak by w rolach głównych grali Bogusław Linda i Czarek Pazura. Dziękuje. Powodzenia i zdrówka.

@lilypeyton6510 3 жыл бұрын

167noo. N

@marbles430 3 жыл бұрын

Outstanding fabrication and project. Thanks for sharing it and your skills.

@pyozoa 3 жыл бұрын

Wow! Awesome, you got some skills!! Definitely helps with all the work that you need to get done! Way to go!!

@captivenut4122 3 жыл бұрын

Your work can't be praised enough! Great conception and execution every time!

@korishan 3 жыл бұрын

Really nice work. I've been thinking of building my own dump trailer similar to this. However, mine would be made out of steel rack beams (we pick up "scrap" from a local warehouse store). One change I would make would be to use three pulleys and run the cable back to the wench. That way it could pick up twice as much weight, albeit a little slower. But it would be less wear on the wench/battery.

@j.albertoavalos4484 9 ай бұрын

Such a great job! 👨‍🔧

@anoka114 3 жыл бұрын

This guy has some mad skills and some pretty nice equipment.

@pcka12 3 жыл бұрын

Love this bloke’s endless ingenuity!

@micdiva 3 жыл бұрын

Hes aight

@mandakhbayarjambalsuren8179 3 жыл бұрын

@zivojinradulovic3302 3 жыл бұрын

Ili

@zymergashi8352 3 жыл бұрын

@@mandakhbayarjambalsuren8179 q1q

@jeremycanning8934 3 жыл бұрын

Like your builds. Industrial strength so you know it will last for years

@felixe.8402 3 жыл бұрын

Except the buyed parts it's absolutly correct. The winch and especially the wheels are the things he needs to exchange first.

@1D10CRACY 3 жыл бұрын

@@felixe.8402 Other than the color, it looks like a HF wench. For light weight applications like this trailer, it'll probably hold out for many years.

@j.davidwilliamson1163 3 жыл бұрын

Love the foot operated vice.

@carlosgil9325 3 жыл бұрын

Simplemente: ¡¡¡¡EXCELENTE!!!! ¡¡¡¡GRACIAS POR COMPARTIR!!!!

@agknives9119 3 жыл бұрын

Uwielbiam twoje filmy. Dobry wózek 😁

@papalilburn 3 жыл бұрын

Outstanding workmanship in every aspect!

@aday1637 3 жыл бұрын

Being Polish is a wonderful thing. Love to see a fellow Pole doing good work. Maybe we should import more from Poland and less from China....then we wouldn't have to replace it so often.

@daveb7999 Жыл бұрын

Dbałość o szczegóły, dopasowanie i wykończenie, obróbka i produkcja są na najwyższym poziomie! Podobały mi się pomysły i możliwość zobaczenia zwiastuna w akcji. Świetna robota i świetny film, dzięki! [Attention to detail, fit and finish, machining and fabrication are top tier! Loved the ideas and getting to see the trailer in action. Excellent work and awesome video, thanks!!]

@stoveboltlvr3798 3 жыл бұрын

Very useful to have. Great job building it!

@SteelCraft99 3 жыл бұрын

Nowy film od Made in Poland i wieczór odrazu staje się lepszy :D Świetna robota!

@bogdanr1344 3 жыл бұрын

Świetna robota, pozazdrościć fachowości Pozdrawiam.

@j.davidwilliamson1163 3 жыл бұрын

Again, a great job by a very good mechanic.

@szczepanchrzastowski2475 3 жыл бұрын

W 22 minuty zrobić takie cuś, to szacun.

@edwardchidester1834 3 жыл бұрын

Awesome DIY Build! Keep up the Awesome Work.

@LagunaFan 3 жыл бұрын

Super robota. Przyczepka klasa, a film przyjemnie się ogląda, nie przewinąłem nawet o sekundę.

@sharadj1611 3 жыл бұрын

I am impressed with the tools and equipments he has. Nice job

@Mr402TA 3 жыл бұрын

Every time I watch a cool build like this, I eventually hit that point where I say, "Man, I wish I had a lathe..." Very nicely done though, clever use of the winch there. Way easier than hydraulics.

@Yhrim70 3 жыл бұрын

yeah no kidding... and a plasma cutter.

@ervincameron8936 3 жыл бұрын

Lathes are gateway tools bro, stay away...

@Mr402TA 3 жыл бұрын

@@ervincameron8936 Damn, too late, I finally picked up a beginner level one. Past the point of no return now lol.

@Hellsong89 3 жыл бұрын

@@Mr402TA Due prices around here even smallest hobby lathe or second hand wreck, i took full nose dive into deep end and started to make my own lathe from the scratch, since someone was gracious enough to drop new chuck, axle, cone bearing and frame tube into local metal collection point, where i picked them up for free. Already got axle machined on the local shop to accept the chuck and currently working on making frame for the bearings and seals, witch get welded to tower and frame will come from I beam probably when i can source cheap 2meter long peace of it and some scrap peaces of plate for the carrier. Tail chuck was pretty easy to source, since machine shop agreed to help out and machine the tubes needed for it and machine MT4 to MT3 adapter that i picked for ridiculously cheap so it can be heat fitted to tail stock. Machining the morse taper would cost pretty hefty amount but this way its almost free. Probably end up costing around 400-600€ to get it operational enough to turn chips, but everything after is just convenience and such addons, like digitally controlled lead screw and digital measuring of the operations.

@ronaldoSilva-iu7bk 2 жыл бұрын

@YHRIMkn

@adrienst.journy4652 3 жыл бұрын

Excellent fabrication. You have talent !

3 жыл бұрын

Always projects we don't see elsewhere! You're the best!👍💪💪👍

@drummerman1206 3 жыл бұрын

Absolutely love watching all of your inventions. You’re an engineering master.

@user-mt8vu9kp3p 3 жыл бұрын

@larrygeorge3599 3 жыл бұрын

Inspirational fabricator!! I think it's great

@MCsCreations 3 жыл бұрын

Pretty fantastic work, dude! Looks beautiful and works great! 😃 It remembered me of my parent's farm! 😃 Stay safe there with your family! 🖖😊

@IndianaDoug 3 жыл бұрын

I enjoy how everything is over engineered on this channel. Love it💪🏼

@markdunford3181 3 жыл бұрын

Brilliant, brilliant, brilliant! 👍👍👍👍

@waynebyerly9681 3 жыл бұрын

After observing your skills at manufacturing, i would never be afraid of buying anything manufactured in Poland. I am very impressed!

@johnsellers2999 3 жыл бұрын

Wayne Byerly you know what pisses me off though? In USA our government would praise his work and buy thousands of them for government work ,but if someone from USA trys to sell them to our own government they (the Biden administration) would cancel the order and call the guy named made in USA ,a racist for the name made in USA. It's not hard to imagine. But very good job made in Poland.

@kokoloko12398 3 жыл бұрын

So cool! You can be proud of your creations. Very useful and super well designed! Best from France

@forcesightknight 2 жыл бұрын

Sweet, now your tractor needs a bucket loader. Great job

@paulsonaksones 2 жыл бұрын

???

@goransablic7339 3 жыл бұрын

Excellent craftman ship. Respect.

@t.d.mich.7064 3 жыл бұрын

Nice build! I think I personally would have used larger tires, but that is something easily changed. Good job!

@gforcekaras 3 жыл бұрын

Envious of your skills man, very nice work!

@ronmiller682 3 жыл бұрын

Very nice trailer. Loved watching you build it. Thank you for sharing.

@michaelfishermanny Жыл бұрын

Absolutely amazing ! Thank you for this view, and Fantastic Machining tools. I learned much.

@DonnDIY 3 жыл бұрын

This is one hell of a necessary build. I felt for you when you were shoveling dirt. Been there, done that. Push of a button on that remote and magic happens. Great job!

@MadeinPolandChannel 3 жыл бұрын

Thanks man!

@beepboop9848 3 жыл бұрын

This is wholesome :3

@bilukumar5995 3 жыл бұрын

@@MadeinPolandChannel f

@ollimakkonen6481 3 жыл бұрын

@@MadeinPolandChannel, Good job man, simple, easy to make, strong and works well. A great tool for any farmer. Greetings from a Finn living in Indonesia.

@fordwinsor9365 3 жыл бұрын

@@MadeinPolandChannel 0loiuy6

@pawpier7671 3 жыл бұрын

Brawo praca dobrze wykonana szczecin pozdr.;)

@Chris-uu3cp 2 жыл бұрын

That is awesome! Really fun to watch! Thanks for sharing!

@wilfridkolarik6110 3 жыл бұрын

Very good ideas and creating materials, tank you very much for the quality video, one moment with you. The best.

@Gustavo.564 3 жыл бұрын

Jajajajajaj muy bueno.!! Excelente video 👍

@user-rl6mo6rr4f 3 жыл бұрын

Мастер на все руки😀 Отличная у тебя техника и инструмент)

@koeoo361 3 жыл бұрын

Вот вы его лайкайте, а ПОЛЯК ни одного ❤️под текстом на кириллице не поставил. Вывод????

@user-rl6mo6rr4f 3 жыл бұрын

@@koeoo361 та я не за лайки комменты оставляю. Он делает классные вещи,мне это нравится,я ставлю лайк,и пишу коммент чтобы видео продвигалось и он получил больше денег с этого. Следовательно,контент будет выходить намного чаще,и радовать меня) Логично?

@yankesinside 3 жыл бұрын

@@user-rl6mo6rr4f Denni mądry z Ciebie człowiek a Polak to bardzo szanuje i ceni. Dlatego proszę bardzo ❤🧡💛💚💙💜🤎🖤🤍💕💗💖. Привет из Польши ✌✌✌

@user-on2cg5hj6h 3 жыл бұрын

@@koeoo361 Русский он знает , иногда отвечает . Просто обычный русофоб .

@user-rl6mo6rr4f 3 жыл бұрын

@@yankesinsideDziękuję bardzo)))

@darrellpiker3330 2 жыл бұрын

Great job man , wish you were my friend , A friend with a welder is a friend indeed …. Great job

@rodrigomirandaariel8229 3 жыл бұрын

Well done my friend!!! Expectacular proyect!! Very good and practice!!!! Thanks for share!!! Best regards from the Argentinian Patagonian!!!👍👍👍👍👍👏👏👏👏

@hedleyfurio 3 жыл бұрын

Awesome to watch a master craftsman at work . As mike patey builds airplanes you do metalwork . Thanks for posting these

@michael6155r 8 ай бұрын

😊pkl,

@michael6155r 8 ай бұрын

@cocospops9351 3 жыл бұрын

Awesome. I'm building one of these myself soon

@juliuszkocinski7478 3 жыл бұрын

It's really refreshing to see someone building something actually useful

@vishnuingle8940 3 жыл бұрын

वब

@vargr 3 жыл бұрын

You're having way too much fun with that. Excellent build, sir.

@WireWeHere 3 жыл бұрын

At 13:45 your cable clamp did a 180 the second you stopped looking at it. The dead horse doesn't need a saddle. A very good channel you have here sir.

@fredericdobbelaere7725 3 жыл бұрын

Made in poland ," tu es un champion "🤟😝

@coryhalvorson8874 3 жыл бұрын

Great idea, brilliant execution, I did something similar but instead of a winch I just put a bottle jack for an engine crane on the front of my tilt trailer

@sawomirgrabski7402 3 жыл бұрын

20 minut filmu,a łopata dalej analogowa 👍👍👍

@lironmtnranch4765 3 жыл бұрын

Nice build, you even made your own sheave for the wire rope, props! Some dump trailers put the pivot point a little forward of the rear of the dump box. 1 foot makes a big leverage difference, and even with a low trailer like this gives room for a steep angle.

@WorkshopFromScratch 3 жыл бұрын

Amazing idea. The whole project is perfectly made. Good job, great video :)

@firmanman209 3 жыл бұрын

@mckrackin5324 3 жыл бұрын

This was hypnotic. Love this stuff.

@antoinefaucher991 3 жыл бұрын

Excellent !!!!! Verry good job! The result is here !!!! Congratulations !!! 😉

@wiktorczyz2977 3 жыл бұрын

Chwała Ci za to że nagrywasz :) myślę że w przyszłości zrobię sobie podobna, ale z podwójną osią i trochę szerszą i dłuższą ;)

@adrianperalta7192 3 жыл бұрын

Excelente!!👍

@jacquesblais6094 3 жыл бұрын

WoW you are a good Welder thanks for the video, awesome

@lucifran2811 3 жыл бұрын

That was fun to watch. Another great project. I've never considered welding in the dark... think I'll give it a try. ;-)

@domenicmaiani3795 3 жыл бұрын

That is AWESOME! Great idea and implementation, you are quite a machinist, thanks for sharing, I'm going to hit the subscribe button as soon as I send this comment!

@victorhugosegovia8520 3 жыл бұрын

ES UN HERMOSO TRABAJO... MUY IMPRESIONANTE...

@tonya9614 3 жыл бұрын

You sir have got skills! Thanks 🙏🏻 for the video

@mud5254 3 жыл бұрын

O zesz ku... Facet tym sposobem na podnoszenie skrzyni to mnie zaskoczyłeś, szacun. Pomysł jak zwykle zajebisty 😎😎😎

@szuwi122 3 жыл бұрын

I mnie.

@charliedavis6965 3 жыл бұрын

Great job thanks for your time to show us how it’s done

@LeonardoSilva-jv5ci 3 жыл бұрын

This is what we can call as a really good job. You hv all the good in tools. Congratulations from Brazil.

@DomNaPechi 3 жыл бұрын

вот это подход к делу! Супер. Завидная аккуратность и т.п. Да и кол-во инструмента радует.

@user-xz4lr9to5s 2 жыл бұрын

Чо за трактор

@jeffbeck6501 3 жыл бұрын

I know the tape is sped up, but he looks like he is working on an assembly line instead of a custom project. ...like every tiny thing is like nothing to him and he is working almost uncounsciously. You never see him just stop, and think about it. It is amazing to watch him work. I care none about what he is actually building. I am here for the build.

@stonekingdom1088 3 жыл бұрын

Vision

@aniljadhav6936 2 жыл бұрын