DIY Pull Up / Chin Up Bar | How to make a chin-up bar without a doorway

Рет қаралды 3,526,037

7 жыл бұрын

full instructions: www.ryobitools.com/nation/pro...
I will be posting more DIY fitness projects and home workouts on my 2nd youtube channel here: / @benuyeda1
follow me on instagram for project updates: benjaminuye...

Пікірлер: 645

@triky5384 7 жыл бұрын

yeap, another diy I know I wouldn't be able to do

@djangoray2665 6 жыл бұрын

I know I can't.

@aladeenmadafaka6286 6 жыл бұрын

yeah, because its so complicated

@Shhhao 6 жыл бұрын

So realistic

@VGastelu 5 жыл бұрын

There is step by step, key is patience and paying attention to video... Repeat.. Think then re-start the video.. Make sure you get all the tools needed.

@HomeMadeModern 7 жыл бұрын

thanks for the feedback and suggestions. you are 100% right when you say there are cheaper alternatives to a chin up/pull up bar. which is why the success of this design will hing upon my ability to develop different attachments for multiple exercises. stay tuned :)

@Cinqmil 7 жыл бұрын

Very cool! Will copy. Thanks;)

@Simnettnutrition 7 жыл бұрын

Incredible! Thank you very much for sharing brother.

@HomeMadeModern 7 жыл бұрын

thanks for the feedback! i want to hear more ideas for different attachments i should make. I think that a bracket that can hold a speed bag or heavy bag would be cool. I pulley system for lat pull type exercises is doable. tell me your suggestions below!

@slizzardman 7 жыл бұрын

For pulley systems, steel garage pulleys from Home Depot are only a few dollars and substantially outperform anything else you'll buy. I've used them for well over 200 lbs as part of a counterweight system and they work great, so 4 pulleys (two sets of 2 pulleys in parallel) could easily and safely 5-600 lbs. The line I used was a 900 lb test 1/8" braided line, synthetic fiber, purchased at REI for about 10 bucks. Worked better than what I used at the gym, seriously. If you do a speed bag platform, make sure you plan for a way to put 40-50 lbs on top of the platform you make. I'd suggest sand bags, they are cheap and they won't vibrate off or make noise, and the extra weight stabilizes the platform and provides enough mass to allow the bag to rebound with maximum speed, which is really important for speed bag work. I'd keep that simple, with a 24" square base. Two layers of 3/4" plywood is plenty for that, without being too heavy to lift conveniently. The sand can add the rest of the weight as two 25 lbs bags or four 10-15 lb bags. One 50ish lb bag would sit on top of the bolts for the swivel, and end up tearing. I've made these lol :)

@tasoine 7 жыл бұрын

HomeMadeModern bu hey this is amazing. Good job very creative.

@avg_fit_dad 7 жыл бұрын

You could also add resistance bands to an added workout. (outward press and angled curls, etc.)

@movere358 7 жыл бұрын

You should implement a squatting rack by allowing weights to be added to each side of the current bar --- I think there is a hook shape in the back that allows the different adjustment levels to stay put, and if you could somehow make it so the bar would glide over that with another attachment it would create a nice squatting rack. One step closer to a full body workout!

@ukaszkulik2871 7 жыл бұрын

HomeMadeModern gftvcurduoivcxy mvmvhgi

@mgd9151 6 жыл бұрын

I like the idea. Regardless of cost and effort, I think it is worth it to exercise your mind as well as your body. You sir are fit in both areas! Good work.

@ibrahimrazzaq38 7 жыл бұрын

from just this one video I have learned so much how to turn my rec room into workout room without buying any equipment thank you

@neogx148 7 жыл бұрын

nice job I was trying to figure out how to make a wall pullup this past week and this is perfect

@bmwi35 7 жыл бұрын

This is awesome! You are truly skilled. I look forward to seeing more projects from you. Thanks!!

@phil.pinsky 7 жыл бұрын

This is really fantastic and a great addition to the loft!

@landminehopscotch3617 7 жыл бұрын

Cool, original and innovative! Good job...

@MrAmrmnabil 7 жыл бұрын

Very inspiring this could be used as a bar holder for bench pressing and squats.

@FrancisOpoku 7 жыл бұрын

this is absolutely innovative and very creative. really love watching your videos

@antstott7017 7 жыл бұрын

Fantastic idea, some inspiration to get some more fitness into my day for 2017. Makes you realise how little you need to do so many exercises

@benmenke 6 жыл бұрын

I love how you are able to work on the floor with just the tools and scrap material.

@victorjsalerno 7 жыл бұрын

that is amazing, simple, sturdy and looks incredible.

@live4knot665 5 жыл бұрын

Probably one of the best in home build for working out ive ever seen, job well fone my friend

@britishogo 7 жыл бұрын

Cool!! Love your tool selection! I'll be building a calisthenics gym in my garage this summer! Can you wait. Thanks for inspiration

@yan_donyan 7 жыл бұрын

Really smart to use the spacer rather than drilling holes through the support beam. Thanks for the idea.

@LivefreeanddiyTv 7 жыл бұрын

This is really cool, great design with lots of different uses! Nice work! 👊🏼🤓

@barratrazioni3606 7 жыл бұрын

This is amazing, very well done!

@steffbell4811 7 жыл бұрын

Honestly, I wasn't sure about this videos just based on the title alone. I put off watching it for a couple of days. However, I'm now glad I did watch. Super cool system and one of the smartest ideas I've seen on KZfaq in a while. Great work!

@matt8863 7 жыл бұрын

Nice advertisement for Ryobi. I'm heading out today to get that nifty little cordless orbit sander. Thanks man.

@nohkra 7 жыл бұрын

This is an awesome diy way to build a pullup / dip bar, way to go! I also have dry walls at home, but would actually prefer to put my pullup bar to the ceiling... Since that is also a dry wall I guess the diy construction might need a little more strength to it though.

@romekspiewak1506 7 жыл бұрын

your idea is great and wonderful ! maybe this is not the simplest way to make it but i'm so inspired you create basis to stright adapt

@workshop_edits 7 жыл бұрын

this...is really awesome - thought it was a great idea to show the different ways you were discovering you could use it at the end as well. Cheers

@YumFalafal 7 жыл бұрын

Was gonna just stay get an iron-gym, but this is actually much better. Awesome build.

@1canadarules1 7 жыл бұрын

this is an absolutely amazing idea

@PrimalEdge 7 жыл бұрын

love that idea! subbed, can't wait to see what else you got coming up, and what you have on your playlists! Healthy New Year!

@JapanJerry 7 жыл бұрын

Nothing short of superb... Very well done.

@1stAjay 7 жыл бұрын

awesome. was thinking of a way to do dips and pulls up without having to buy some rig. Im gonna give this a go

@fitwithili9300 7 жыл бұрын

Looks good, i need this for my home workout videos💪🏼

@88minotauro 7 жыл бұрын

love your creativity

@ValiousTV 7 жыл бұрын

Nice project, clean looking. Was looking for ideas for a homemade pull up/chin up bar.

@andrewtroon5814 7 жыл бұрын

Coming from someone about to go into Product Design at university. This is incredibly creative and just gorgeously produced. Well done my friend, one sub for you

@HomeMadeModern 7 жыл бұрын

thank you so much for watching and for hitting "subscribe"!

@HoldFastFilms 7 жыл бұрын

This turned out great man!

@HomeMadeModern 7 жыл бұрын

thank you

@aceizaki1587 7 жыл бұрын

I really salute your creativity and effort dude

@VitalityFactors 7 жыл бұрын

You're a genius! great work! Thanks for sharing!

@briantran3791 6 жыл бұрын

This is awesome! Now every room can be a fitness room. What a great business idea by the way.

@forestlampcraft472 7 жыл бұрын

Cool and original stuff.If you put the rollers then it will be possible to suspend gravity.)))

@_That_Dude 7 жыл бұрын

thanks man, this is an awesome design. I'm making this tonight!

@sisca.d 6 жыл бұрын

What a brilliant idea you have there!

@woodscrew5612 7 жыл бұрын

A very successful project. Looks great and inexpensive!

@infectedmentality 7 жыл бұрын

Incredible. As a bodyweight/calisthenics strength practitioner myself it's exciting to see someone beginning on a 'home workout' journey, as well as producing DIY calisthenics equipment.

@alexander24v15 5 жыл бұрын

This is awesome! I'm doing it this weekend!

@jesusfimbres2636 5 жыл бұрын

Awesoooooome!! Love the build, and the tools 👍

@jameschan1334 7 жыл бұрын

That is some pretty awesome work man, thanks for sharing the ideas :)

@butter5363 5 жыл бұрын

Nice job, love all of the inspirational comments below.

@matheusmascarenhas 7 жыл бұрын

Completely amazing!

@zshishani2000 7 жыл бұрын

Excellent idea and great job

@JasonBarre 7 жыл бұрын

Cool system! I can imagine many other attachments you could build for it.

@WilliamLutesMaker 7 жыл бұрын

Dayum Ben :-) Very inspirational!!!

@cheeky_bones 6 жыл бұрын

Nice and clever little thing you made there ;-) Great work man!

@mattnobrega6621 7 жыл бұрын

that looks wicked gnarly. That's a pretty rad setup idea dude.

@jvvkko 7 жыл бұрын

looks amazing!!!

@4runner4wd79 5 жыл бұрын

Sweet. Thanks for making this video.

@brucewayne5557 6 жыл бұрын

That’s so great Just amazing Home made

@jesuschristiscomingrepentb3224 7 жыл бұрын

That's awesome, and you made it look very easy.

@TaroUehara 7 жыл бұрын

Can't wait to see other home gym equipment!

@Portal12345678910 7 жыл бұрын

This is so clever!

@HANENG18 7 жыл бұрын

This is such a great platform, all sorts of equipment can be made to attach onto it. Only problem for me is storing the parts your attaching to the main pillar. Possibly you could make them into some sort of side table for example.

@VivekMishra-bl5nn 7 жыл бұрын

Great video dude! I was impressed of your consideration to speed up the video and save watcher time. Cool multi-purpose installation too. regards :)

@Zagor24 6 жыл бұрын

this is pretty cool, gj!

@joewhatsup 7 жыл бұрын

Great job and video!

@hanguyen2211 7 жыл бұрын

That is so creative!!! Big Like

@andypmg6631 7 жыл бұрын

Ben - another great idea -

@japetsureinikka3778 7 жыл бұрын

That is great ...and with resistance bands with that ...complete home workout...good one ,Thanks

@HomeMadeModern 7 жыл бұрын

yes!

@dannysaxg346 7 жыл бұрын

Dude! Right On!

@produtor2014 7 жыл бұрын

Ótima sugestão, vou fazer obrigado!

@blackstar_1069 7 жыл бұрын

amazing work

@user-sw1bg6lv1c 7 жыл бұрын

It is really cool!

@dennisw.ausbanderr.7716 7 жыл бұрын

Looks great!

@Need_better_handle 7 жыл бұрын

Cool. Nice work.

@alexgentile1252 7 жыл бұрын

Thanks.... very cool and creative !!!

@0713mas 7 жыл бұрын

Thats killer!

@ShortyandCallie 6 жыл бұрын

Ingenious! You sure do work fast! Lol!

@alexmontalvo6854 7 жыл бұрын

this is pretty good!! I think I can pull this off! Thanks for the vid.

@HomeMadeModern 7 жыл бұрын

thanks for watching!

@thorgyn666 7 жыл бұрын

Nice video and construction. i bild a dip bar by using a broken yard trampolin my kids used to have. works for both dips and rows.

@GaryLeeKaHo 7 жыл бұрын

really nice!!! I am going to build one!

@edward-ft1gg 7 жыл бұрын

you're a fantastic genius

@joelhampton3777 7 жыл бұрын

Brilliant design 👌🏻

@kmecha5115 7 жыл бұрын

Pretty cool diy

@anissjoomun3501 7 жыл бұрын

hey man your equipment is so good nice vids man.

@redhorizon7225 6 жыл бұрын

wow great job!

@kristinlikasa1238 7 жыл бұрын

Really cool man. I would want to make all of the things you invent.

@geoffjohnston1531 7 жыл бұрын

excellent work.

@xSLWRTHNUx 7 жыл бұрын

Hey, great video! I just noticed that when you're at the top of your pull-up, the top of the board seems to flex off the wall a little. You can see this in the 3 picture animation (thing) you used at the beginning and end of the video. I think adding that cross-board to other studs would be a good idea. Don't want you to fall and get hurt.

@stupidasso77 7 жыл бұрын

Great idea! Check in to DOM tubing. It is not seamed like black iron pipe is. DOM is used to be race car chassis and roll cages.

@KagedCreations08XX 7 жыл бұрын

That's really cool

@briantrend1263 7 жыл бұрын

plywood is beautiful reminds me of my mecano sets when I was a kid. plumbing looks ugly in close proximity so try cutting a galve pipe 7 inches from the ends half way through and bend the grip handle angles down then weld the cuts and its neat strong and tidy . nice idea thankyou