DIY Rocket Hydroplane

Рет қаралды 737,955

2 жыл бұрын

I've been experimenting with rocket powered boats again! Go to curiositystream.thld.co/proje... and use the code PROJECTAIR to save 25% off today, that's only $14.99 a year. Thanks to Curiosity Stream for sponsoring today's video.
BUILD THINGS TOO
👉🏼 I sell downloadable plane, car and boat kits on my website.
store.projectair.co.uk/collec...
👉🏼 Build a simple rubber band plane I designed store.projectair.co.uk/produc...
👉🏼 Where to get electronics, cameras and 3d printers (Amazon affiliate)
www.amazon.co.uk/shop/projectair
SUPPORT MY VIDEOS
👉🏼 Sign up to my Patreon / jameswhomsley
👉🏼 Follow me on Instagram for day-to-day updates on my current builds / jameswhomsley
Big thanks to Andrew Applepie for the music used in this video - / andrewapplepie
DISCLAIMER: This video is purely for entertainment value. Personal use of video content is at your own risk. Recreations of experiments, activities and projects are the sole legal responsibility of the person(s) involved in replicating them. I can not be liable for any information or misinformation, wrongful use, damage to personal property, death or any circumstances that result from replication of any projects seen. Be safe!

Пікірлер: 889

@Project-Air 2 жыл бұрын

Ask me anything below! I will be replying to questions in this thread for 24 hours. 😊🚀🚣🏿‍♂️

@drewdanielvaldez5478 2 жыл бұрын

How did you get into science?

@astronautnr7 2 жыл бұрын

What can i ask you?

@callisto3828 2 жыл бұрын

How did you get into engineering and when did you consider uploading your projects to KZfaq?

@thegmoneygaming164 2 жыл бұрын

What is the best budget 3D printer?

@Project-Air 2 жыл бұрын

@@drewdanielvaldez5478 I've just always been building and playing around with things

@integza 2 жыл бұрын

I'm starting to think I was a bad influence on you James

@RapTapTap69 2 жыл бұрын

When he starts strapping rocket motors to tomatoes you might have to copyright strike😂

@TheSquirrelRCchannel 2 жыл бұрын

Yeah ,make sure he doesn't enter tomato territory!😂

@radium4194 2 жыл бұрын

At least it was you and not me

@pk110-_-3 Жыл бұрын

Uh oh 🫠

@BITCOIN_69 11 ай бұрын

I love tomatoes 🍅

@vroomtherapy 2 жыл бұрын

I don't have much experience with boats, but I used to do model rocketry as a hobby. Something important to note when using larger rocket engines is that as they burn, they weigh less. This will change the center of gravity of whatever you put them in as they burn. If, for example, the boat weighs 100 grams with the rocket engine, by the time the engine has completed combustion, the boat could weigh 70 grams, assuming the propellant is 30% of the boats mass. This will shift the center of gravity forward while the engine burns, while also causing the boat to weigh less. I don't know how this could be affecting the behavior of your boat in the water, if at all. I am just pointing it out in case you hadn't considered it already.

@emily_black6334 2 жыл бұрын

Fascinating! I'm going to research this more for my pursuit of model rockets. :)

@richardchambers256 Жыл бұрын

As you mentioned as the motors burn they get lighter. 👍 But as long as the Center of force stays in front of the Center of gravity, it will increase stability. Another thought is if you hook up your igniters in series, using a higher voltage. They will either ALL go off, or nothing at all. Saving motors incase of a bad igniter. 😁

@tomwinchester3582 8 ай бұрын

That is a top tip. Never thought of that. Currently annoyed by a phone advert with a multiple engine water rocker launch: yes, it's do-able, but I don't think they did it@@richardchambers256

@Jonathan.D 2 жыл бұрын

My dad and his cousins used to build hydroplanes back in the '60s and '70s. One thing I learned from them was the faster a boat goes the longer it needs to be. You can use things like airfoils to help keep the front down. The problem with that is the airfoil is normally controlled by the driver to adjust the amount of force needed. You could try to make a fixed airfoil and do a bunch of testing until you get it set at an angle that will hopefully work. Whatever you do I hope it works out and we can't wait to see it.

@brunorosa2227 2 жыл бұрын

You could use a spring loaded airfoil, using the spring tension as a governor if you like, much like a centrifugal clutch, more velocity, more resistance (assuming the limit of deflection was a 'known') Hull length and width ratio is also known in the yachting and rowing worlds.

@brunorosa2227 2 жыл бұрын

I'd like to add, I don't know how you'd measure the velocity to act upon the the spring that governs the airfoil, that would take quite some thought i would guess.

@Jonathan.D 2 жыл бұрын

@@brunorosa2227 The limit of deflection is the tricky part. You had the same idea I was thinking. Manual adjustment with the remote would be too slow. The simplest way might be to test set angles until something suitable is found. When you're sitting in the boat you can feel when more or less is required. There are so many unknown variables due to the size and speed of this boat that make it impossible to figure out without loads of testing.

@dailissmildzers 2 жыл бұрын

Good idea with the airfoils. Culd a gyroscope be used to control the foils, springs and tension won't work due to the mad acceleration of the rockets.

@donjonjr1 Жыл бұрын

Definitely needs to be longer for the speeds it's hitting

@bonzaipineapple3143 2 жыл бұрын

Just a quick thought that with the dual motors, fitting them vertically could have reduced instability even if there’s a miss fire

@madkills10 2 жыл бұрын

wouldn't that push the nose up or down in the event of a single engine failure though

@robinvanlooy294 2 жыл бұрын

@@madkills10 True, maybe he could solve the take off problem by mounting the rockets a bit above the center of the boat to creat a downards momentum a prevent taking off or it will make the boat dive into the water :)

@bonzaipineapple3143 2 жыл бұрын

@@madkills10 yes I was just thinking that might be less disastrous than a lateral instability

@tonyennis1787 Жыл бұрын

The English Electric Lightning has entered the room.

@peterrobinson7187 2 жыл бұрын

Brilliant! I love the 'it didn't quite work so next time double the power' philosophy. Would a hydrofoil help keep it in the water? Very cool mini too.

@collinkaufman7582 2 жыл бұрын

Hydrofoil would probably go against the idea of ‘minimal drag from the water’

@xippzap 2 жыл бұрын

Thrust vectoring would fix this problem, simply angle the engine slightly downward pivoting the nose down under thrust, don't go too far or you will end up with a submarine lol. Less speed but more stability.

@NicholasRehm 2 жыл бұрын

The high speed shots were totally giving me mythbusters vibes, loved it

@Project-Air 2 жыл бұрын

I'll have to do more of that then! ;)

@RideAcrossTheRiver Жыл бұрын

I remember that episode!

@Francois_L_7933 2 жыл бұрын

When I was launching model rockets, I found that the rubber plugs sometimes either break the igniter or hold too tight. The best way I found to prevent this is to just hold them in the motor with a small piece of masking tape. Also, those D12 motors probably have a parachute charge in them. Try and get some D12-0 which are designed for multi-stage rockets (and use some fireproof wadding in the boat).

@Gnrnrvids Жыл бұрын

A D12-0 still has the parachute charge in it, it just fires at 0 seconds of delay.

@mozkitolife5437 2 жыл бұрын

It's going so fast the sponsons are acting as wings. Anything that collects air under it will provide lift given enough velocity.

@tedferkin 2 жыл бұрын

Push a brick through the air fast enough, and it will give lift

@biko9824 2 жыл бұрын

Time for spoilers it is then?

@sircod 2 жыл бұрын

What if the sponsons were at the back instead of the front, and the center point of contact moved up front? That way any lift generated by the sponsons would be closer to center of gravity and less likely to pitch the whole thing up.

@Solnoric 2 жыл бұрын

That happens with hydroplanes during races now and then

@Solnoric 2 жыл бұрын

@@sircod instead they pitch it down and it goes to pieces. The wide front narrow rear is significantly more stable, too

@ElSelcho77 2 жыл бұрын

I love your car! Was my first one about 27 years ago. Been looking for years now but they are hella expensive in good condition. Oh, nice boating content, too ;)

@patrickcollins5752 2 жыл бұрын

I bought a rusty one about a year ago, always wanted one, probably be a few years b4 it gets on the road

@ElSelcho77 2 жыл бұрын

@@patrickcollins5752 Have fun restoring this gem! I have no experience with welding, so a rustbucket is out of the question for me. Maybe I should learn how to weld...

@thomassheldon2365 2 жыл бұрын

Awesome video, thanks! To fix your ignition problems try using tapematch and igniter sticks. It’s essentially sellotape with black powder stuck to it. You can poke it into the motors, meaning that you only need one igniter. I was having problems reliably lighting multiple rocket engines, and this was a game-changer for me.

@BimaAgungSaputra-gt4px 2 жыл бұрын

2:30 nice drift you got there mate

@w.w.2restorations.vehicles698 2 жыл бұрын

When I was 16 or 17 I made a rocket car with 2 rocket tubes, tricycle wheels and a "V" tail. It would go really well with A-8-0, B-6-0 and C-3-0 engines. When I graduated it to the "D" engines, it wouldn't stay on the ground. It would travel about 40 feet then head straight up. I weighted the nose cone down with lots of lead, but it refused to stay on the ground. Nice video, thanks very much for bringing back a great memory of mine. Oh yeah, that's a great likeness of Blue Bird B.T.W.

@darrellcook8253 2 жыл бұрын

I did the same thing back in '77 and figured out how to do it without entering the space program. I kept it on the ground after I used trailing wheels in the rear behind the rocket exhaust and extended their height, bigger and thinner wheels. Also went to almost 3 feet long and went to a tricycle setup. I used D-8-0 or D - 12 - 0 motors and it turned out blazing performance. Too bad video was so dang expensive back then. Also used three tennis nets to stop it with no damage. Until I missed. Then junk.

@Lozzie74 2 жыл бұрын

Brilliant work! I especially liked the speed check system. You’re very pragmatic about failures. Good way to be.

@james14294 2 жыл бұрын

Just had the thought that ProjectAir is doing water projects 😛 for some reason that amused me

@Project-Air 2 жыл бұрын

Still involves aero though ;)

@james14294 2 жыл бұрын

@@Project-Air I guess making boats fly does count, its a feature not a bug 😛

@azztopia 2 жыл бұрын

This man has the most brittish car i have ever seen in my life. hat off to you mate.

@simonabunker 2 жыл бұрын

If you go for active control you might want to look into the wand used on foiling moth and Waspz sailing dinghies. These are mad little boats! They use the pressure pushing against the wand to adjust a flap to keep the ride height fairly stable. The bonus is that it's all mechanical - no electronics required.

@grimfpv292 2 жыл бұрын

That's interesting, but would probably be way to slow for adjusting the rideheight of a rocket.

@grimfpv292 2 жыл бұрын

Or perhaps not. I noticed the front sponson on the rockedboat were adjustable. If you make the 'wand' the rear sponson adjusting the angle of the front ones, it might be doable.

@rmg_lb 2 жыл бұрын

Great video! Love to see you implementing some follow up projects. I guess a problem here is the motor being forced coaxial with the fuselage, so if you change the AoA, the thrust is off-horizontal. Maybe having the thrust adapter tiltable might improve stability? Really interesting to see you improve your designs, now being quite sophisticated modular builds.

@chrisc6537 Жыл бұрын

LOVE this channel. The world needs more of people like you my friend!

@Shrg009 2 жыл бұрын

Love your CaR 2:28 ❤ Edit:And your small stunt there 😘

@matthodel946 2 жыл бұрын

All your projects are great, kudos!

@RCTanksTrucks247 2 жыл бұрын

Great video! BTW I love your mini

@calistohuettich 2 жыл бұрын

Great Video as always! I reeeeally love the high speed shot of the rocket breaking up. (So dramatic) If you are having issues, I can only recommend using the Klima Igniters. They are much more reliable than the hot wire type igniters because they are encased with some sort of explosive. I have used these extensively, and have never had any issues.

@ericlotze7724 2 жыл бұрын

On this note, i was thinking you could pursue some sort of Explosive Bridgewire Detonator (EBW) / Exploding Foil Initiator (EFI) based E-Match. The EBW is especially easy given you just need a capacitor bank and thin wire if i remember correctly.

@notanengineer 2 жыл бұрын

That slide with the Mini was 👌

@itsCN 2 жыл бұрын

Been waiting for this, great job

@trumps-a-hoe Жыл бұрын

Try putting a canard or a spoiler near the nose to help push the nose down. Ya might have to scale up the boat a little more though.

@TheEviling 2 жыл бұрын

This is like watching Tooltime all over again. Tim Allan asking the crowd what they want, and everyone shouts back "More Power!" :) i love it

@ShawnChristopher10101 2 жыл бұрын

Curious if the "canal" you've built as a test track is adding to air pressure surrounding the boat.

@-Tris- 2 жыл бұрын

You can use capacitors charged to a few hundred volts (like a real detonator) and put the igniters in series. This will ignite every motor fast and at the exact same time.

@themixeurgaming5201 2 жыл бұрын

Have you thought about using an hydrofoil design with a "wing" shaped well... hydrofoil just under the water line ? Would probably prevent it from going nose up in high thrust scenarios. Love the content, keep up the wrok ;)

@scotttod6954 2 жыл бұрын

It will also reduce water drag. Pretty sure you could have control surfaces on the hydrofoil to tune it in. Thinner the struts and hydrofoil material the better for speed. At those speeds a very small foil would be more than enough.

@ramradhakrishnan9382 2 жыл бұрын

Great video! I think the toppling and tumbling calisthenics performed by the boat is more due to the thrust line not passing through the center of gravity, or perhaps better still, slightly above, and not due to aerodynamic effects. Also, to improve the chances of igniting both (or more) motors simultaneously, I hope you are running separate pairs of cables back to push button and power supply - essentially a parallel connection with a beefy enough battery that ensures that the terminal voltage on any igniter does not sag significantly when the other(s) suck up the juice!

@ScienceOfProject 2 жыл бұрын

Amazing experiment

@jakedevries1455 2 жыл бұрын

Whoop whoop! Another Project Air video! 🚀

@LobsterBisque13 2 жыл бұрын

I’ve been wanting to get into model rocketry for a bit now, but it seems really complicated. What is the best way you recommend to “enter into” model rockets?

@monstrositylabs 2 жыл бұрын

Just buy a basic model rocket kit

@BPBomber 2 жыл бұрын

Go on Amazon and order yourself an Estes rocket kit and some model glue. Once built, to launch it, you will need an “engine” that fits the rocket you built, ignition matches, a launch pad, wire, and a pushbutton launcher. You may even be able to find a kit that includes everything, I know Estes used to make a complete kit

@iwonder1216 2 жыл бұрын

Not to complicated. It's fun, so just start with a Simple Estes kit.

@ceasarslife7535 2 жыл бұрын

Thank you for posting new video... It's like waiting for Christmas it takes forever...lol.. But always worth the wait

@Project-Air 2 жыл бұрын

Haha you’re welcome

@richardstamp2410 Жыл бұрын

Years ago we used the gun powder from fire crackers for multiple engine rockets. Plug the nozzle with wadding once the igniter and powder have been added. You'll notice quicker ignition also. The max one guy was able to ignite was 24 engines in a Saturn 1B.

@Casualgamer3789 2 жыл бұрын

Very cool vid :) love the content and i can tell you put in a lot of effort into this vid :D

@jeimasuta_v598 2 жыл бұрын

Been waiting for this

@Ekansh_Dadheech 2 жыл бұрын

big fan , love your projects

@asteroh1875 2 жыл бұрын

Ultra cool!You could make a hole inside the fuselage that resembles the shape of a car aileron, so you can have more downforce.

@darrelldixon8056 Жыл бұрын

I did this back in the Summer of 1985, built a much smaller hydroplane out of a Estes rocket tube, "C" size motor, and balsa Hull/Sponsons. made a metal ramp at the lakes shoreline had a crowd around to watch, and after ignition watched it dive straight down under the water, becoming a rocket powered "Submarine" for a brief moment and floating back to the surface. I didn't give up though, second attempt was a cheap plastic kids "Tugboat Toy" with a roman candle firework shoved in pointed backwards.. I was told not to "Light it off by the docks" and with assistance from a friend transported the contraption out a short distance. Again with a small crowd gathered to watch I lit off the roman candle. To the amusement of the crowd the boat did not propel itself forward. it only slowly rotated a few feet from the side sending fireballs across the small aluminum fishing boat with some striking the side with "Ping, Ping" causing both of us in the boat to try and duck and take cover from the barrage of fireballs! I returned to a lot of laughter about the display...

@ianhill20101 2 жыл бұрын

Big up to the mini its a beauty lovely colour.

@TexMex421 2 жыл бұрын

Awesome video! I've seen a lot of these rocket boats before, and they never work too well. It always seemed to me that you should build a fast RC boat and when it was up on a plane, use the rocket as an OMG booster.

@janhanchenmichelsen2627 2 жыл бұрын

There is a reason for why hi-power boating requires a very skilled and delicate touch regarding throttle input, trim and steering. :-)

@martinparsons1354 2 жыл бұрын

Wow....glad I found this....and you drive a classic mini!! keep up the good work

@DCDLaserCNC 2 жыл бұрын

Love the old Mini!

@kevkev5935 2 жыл бұрын

This was awesome.

@jim-stacy 2 жыл бұрын

You've made a scaled down bluebird. Donald Campbell would be proud!

@Ash-nk5ix 2 жыл бұрын

Sick mini dude. cool projects too

@truescotsman4103 Жыл бұрын

We used to have rocket drag races when we were kids. We would get a toy with wheels like the steve austin $6mil dollar man rocket plane with wheels it was the best. any spaceship or any toy car or wheeled vehicle would work. You would modify it with a drill or saw or knife whatever you had using glue or duct tape or whatever. You install D size Estes rocket engines. I did three engines on the steve austin wheeled rocket ship once. Lots of fun I'm 58 now I might even try it again!

@olivialambert4124 2 жыл бұрын

It might help to add horizontal stabilizers at the rear for the testing. Whilst the water is so flat they aren't at risk of contacting water it makes sense. Not only will they improve the vertical stability a lot, by ever so slightly lifting the rear it would keep the nose on the ground to keep the tests working. This seems like a far better solution than altering the pontoons as the lift from them is far less consistent from waves, but also varies a ton from speed, depth, and so on whereas aero only really varies from speed. In essence, we are taking v squared out of the stability equations leaving only a second v squared remaining instead of v to the four (probably).

@blubuy5651 2 жыл бұрын

Love you’re video’s keep it up 👍

@titogilbert2 2 жыл бұрын

Something to note about the engines you were using... The red label engines shown when you loaded the two engine test were boosters... They put out a large flame to ignite the next stage when their propellant burns out, which could be the cause of your "spontaneous combustion" of the second motor during that test. For these tests you should try to find the plugged engines. (D-12P instead of D12-0) They are used to launch rocket powered gliders into the air.

@the_viewer_0 2 жыл бұрын

Amazing project But that mini!!! 😍

@DrewTeter 2 жыл бұрын

What about using hydrofoils? It might let you avoid needing active controls if you have multiple foils set up in the right way. I'm thinking stacked on top of each other like a tri-plane, though google also shows single foils in a V-shape. - Boat rises too high? The bottom foil is pulling the boat down. while the other foils are above the surface. - Boat too low? The other foils are submerged and provide additional lift. - Boat tipping over? The foils on the low side are submerged and right the boat automatically.

@DrewTeter 2 жыл бұрын

Oh, wait. I just realized you'd have to deal with off-center forces of thrust. That additional torque complicates things. Might still work though.

@whoever6458 Жыл бұрын

My friend made a really big model rocket when we were young that had 4 D engines to launch it. She was all proud of it and gloated at all the rest of us who had the small rockets. But, when she went to launch it, only two of the motors ignited, the rocket went up just a little, then flew sideways, and finally lodged itself in her tent like a dart. It was SO funny but her mom was mad that she screwed up the tent. The rest of us had ours all packed up when we were actually launching our rockets.

@tubingview3251 2 жыл бұрын

Had you thought about the use of a forerigger that rides on a levered arm to adjust the pitch of the vessel? As the nose rises the forefigger applies active air- or aquafoil attitude adjustments.

@ezrarichardson279 2 жыл бұрын

you should make a rocket powered hydrofoil boat next!!!

@enclavegeneral2077 2 жыл бұрын

Nice mini

@JoeOvercoat 2 жыл бұрын

The test rig is awesome.

@mdoyle1981 2 жыл бұрын

Consider the Center of Pressure whenever you're making changes to the thrust, that's a critical component of rocket design which crosses over to this project.

@darrellcook8253 2 жыл бұрын

Center of mass, center of thrust, center of pressure, center of gravity, stability depends on the center. Oh yeah center of lift. All has to be accounted for: the propellant burning and the changes to the center of gravity and subsequent changes to the other centers. Its hella complicated. But fun. (I used to be a brain surgeon and a rocket scientist but now I'm fascinated by small bright shiny objects.)

@ProPyroPower 2 жыл бұрын

You got my sub,lovin the content

@gustavocarvalho4919 2 жыл бұрын

Maybe a channel in the hydrofoil could work, it can keep the boat lower without increasing too much drag. As the contact area would be smaller, the boat can stabilize closer to the water

@carlwkemp3 Жыл бұрын

I saw one where the designer made a skimmer using V shaped wedges instead of foils. The wedges are pointed forward. This means if the boat gets too high, the top and bottom of the wedge have the same force acting on them, so it loses altitude and drops back to the water. if the bottom wedge is close to or in the water, since there is no escape out the back of the wedge, the bottom half of the wedge becomes an air ram, and the buildup of air pressure lifts the boat.

@FTATF 2 жыл бұрын

You have to adjust the bow from the stern. When you get the bow bounce you need to push the stern up. Typically this is done with an engine or trim tab but in theory you could use some sort of spoiler. You might even be able to get it to self adjust mechanically.

@outrageousalan7780 Жыл бұрын

Very nice classic Mini.

@terryboehler5752 2 жыл бұрын

Great job

@bbb8182 2 жыл бұрын

Rapid iterations are REALLY good for inspiration! Especially for people like me with teenie weenie attention spans.

@samspeed6271 Жыл бұрын

Savage! The correct unit of thrust is the Newton! (Joking, kg is OK, but Newtons are better) Great video

@priscsepa 2 жыл бұрын

Thanks for measuring in kg

@myperspective5091 Жыл бұрын

A couple years ago I decided to make a handful of rocket power boats. Most went airborne or they went completely submarine. I found it interesting that the rocket motors worked underwater. Most of the ones that went submarine easily shot out to about 50 feet underwater like a torpedo.

@dextrodus 2 жыл бұрын

2:25 you just peaked with that shot.

@GeirGunnarss 2 жыл бұрын

Love your Mini.

@UncensoredGunEnthusiast 2 жыл бұрын

What filament brand do you use on your printers, it looks as though it works well with the ender 3

@queteimporta67 2 жыл бұрын

Cool project. You have an awesome car

@sacrificialrubber779 2 жыл бұрын

Add a small adjustable wing to the front to keep the nose down!👌🏻👍🏻

@lunkydog 2 жыл бұрын

That's a nice looking Mini.

@oliverscorsim 2 жыл бұрын

I think some small adjustable spoilers front and back would fix this. Loved the clip with the f motor keep it up.

@SmokeBros42069 2 жыл бұрын

You could probably use some ballast or a small lead weight in the nose cone to help keep the craft on the water

@rohan.r.pulikkan5391 2 жыл бұрын

That's amazing

@williamwbarrett Жыл бұрын

I'd love to have your Mini Cooper! Absolutely Lovely!

@carlosfrostygreen6855 Жыл бұрын

Thanks I never seen a speed boat 3d designed on You Tube before this one on your channel o wanna see more. Please do more of this 3d print.

@jaleemasangma2820 6 ай бұрын

Wow amazing

@BlooCollaGal 2 жыл бұрын

2:30 I was not expecting my man to pull up in a Yugo and Slav Squat on the camera!

@ripwreckraceway Жыл бұрын

the fellow knows his stuff fun i enjoyed watching ! rocket on :D or there in :D

@csj9619 Жыл бұрын

I made a model dragster powered by a CO2 cartridge and eventually switched to model rocket engines. The way I kept it on the ground was by screwing eyehooks into the bottom so it can ride on a cable stretched between two spikes hammered into the asphalt.

@BlooCollaGal 2 жыл бұрын

1:55 I was seriously expecting this dude to light the engines indoors.

@wadiaabushanab9607 2 жыл бұрын

Great video! But I think you might have only tested how fast an airplane can go haha. I’m excited for the next video in this boat series keep up the good videos.

@whoever6458 Жыл бұрын

I liked your drifting in the snow in your car. lol Cool! I accidentally drifted in my car when I was young on a sunny day because I had some heavier people in the back. Somehow I was able to instinctively drift in my lane right around the corner. Everyone who was in the car with me was upset with me but at least they hadn't needed to take the slow ass bus where they wanted to go.

@TheTonester2312 2 жыл бұрын

Magnificent!!!

@joey_f4ke238 2 жыл бұрын

I think that changing the thrust angle could help with generating a slight bit of downforce without having to rely on aero to push it down, or maybe have it a bit more nose-heavy and balance it with the angle of the pontoons

@phoenixbda6164 2 жыл бұрын

this was uploaded on my birthday. Yay?

@Stubby0266 2 жыл бұрын

Connect your main fuselage pieces with either small wood dowels or carbon rods.

@christopherfowler3376 Жыл бұрын

I like the idea of a hydrofoil and maybe a an inverted airfoil under the main hull of the boat (like an F1 car has). But a longer length with a center of gravity towards the front would keep the boat on the water too

@MirlitronOne Жыл бұрын

About 20 years ago, I helped my son and his schoolfriends to build a rocket-powered boat for a class contest. To my surprise, the school approved it for a test in the outdoor swimming pool, which was enclosed in wire netting. I was so concerned that it shouldn't take off that I designed it with some downforce from the airflow. The result was spectacular - the boat shot forward about one metre, then dived to the bottom of the pool with the rocket motor still burning. It finally bobbed back to the surface a little more than one metre from the starting point, and was awarded a special prize for "Least Distance Covered By Any Entry." It was, however, a most spectacular failure!

@theboredinventor3161 2 жыл бұрын

you could try making it like a hydrofoil board, with a horizontal fin or blade in the water that will pull the boat down as it moves

@joenagel6644 2 жыл бұрын

Look into hydroplane racing boats. They use an active front splitter controlled by the driver to control the nose of the boat. They can add downforce to keep the nose down and reduce it during straight runs to increase top speed. Some sort of strain gauge in the rod holing the front floats in conjunction with an accelerometer/ gyro to keep it under control?

@adamgriffith8163 2 жыл бұрын

Great channel! You seem to be doing all the stuff I wish I could XD Have you considered implementing a horizontal stabilizer like Ken Warby's Spirit of Australia? Depending on airspeed this should help with providing a restorative force to any pitch deviations. Looking forwards to seeing the next episode!

@bryancobb1151 Жыл бұрын

Lol, I did this about 20 years ago and I couldn't keep it on the water, it was glass covered polystyrene foam, fun either way. I used a v hull design and the only thing I could figure out would be to have long trimtab type stabilizers on the back