DIY Spray Bed Liner for Jeep Wrangler Interior Tub (Raptor Liner)

Рет қаралды 101,213

Күн бұрын

DIY Spray Bed Liner for Jeep Wrangler Interior Tub with U-POL raptor liner full tutorial here: bit.ly/2pUvHyi
In this video, I show you how to spray bed liner in Jeep Wrangler interior tub with raptor liner. My 1992 Jeep Wrangler YJ Islander had rust on the interior floor board and interior tub, so I sprayed 2 coats of U-Pol tintable Raptor Liner Spray Bed Liner kit. Learn how to remove carpet and seats from a Jeep Wrangler YJ. I also show you how to prepare the surface for spray bed liner (Raptor Liner) for proper adhesion. I walk you through how to remove rust from a Jeep Wrangler interior tub by degreasing, etching, and applying POR15 to create a paintable surface.
Be sure to visit my blog post and find out the answers to common questions such as: How much it costs to bedline a Jeep? How to determine bolt size for Jeep Wrangler YJ?
★ TOOLS / SUPPLIES (Affiliate Links) ★
Raptor Tintable Liner Kit: amzn.to/2PviEyd
Spray Gun (buy if not included w/ kit): amzn.to/2y193IT
Dewalt Grinder: amzn.to/2xVlHcr
Grinding Disc: amzn.to/2OC9HpP
50 grit metal sanding disc: amzn.to/2QCeBQU
POR15 Kit with Degreaser & Metal Prep: amzn.to/3XMn9XW
Rust Removal Tool: amzn.to/3QDGoka
Rotary Sander: amzn.to/2QyREhs
Sandpaper: amzn.to/2QDtYZh
Retractable Air Hose: amzn.to/2QCdS28
Air Compressor: amzn.to/2pLFXZz
Nitrile Gloves: amzn.to/2RAzOMl
Respirator: amzn.to/2pHX1Q2
Painters Tape: amzn.to/2RDiXJ2
Painters Plastic Drop Cloths: amzn.to/2A0XtyM
Epoxy Putty: amzn.to/2EilHZu
Chop Brush: amzn.to/2RK9yiE
Jeep Wrangler Interior Bolts & Hardware:
Bolt Organizer: amzn.to/2zRYN78
Anti-Seize Lubricant: amzn.to/2CgzeOL
Bolt Gauge: amzn.to/3DgJyFe
PB Blaster: amzn.to/2QK67HB
Mini Torch: amzn.to/2RL64fY
Torx Bit Set: amzn.to/2pJRh8B
Socket Set: amzn.to/2QELa0r
1/2" Drive Click Torque Wrench: amzn.to/2pHHGPu
Rear Door Hardware bolts 1/4"-20 x 3/4": amzn.to/2NnXdxp
Rear Seats to Body 3/8"-16x1.25": amzn.to/2NnjivK
Front Seats to Body 7/16-20 x 1.25" (qty 1): amzn.to/2Ozha9c
Front Seats to Body 8mm - 1.25 x 30mm (qty 3): amzn.to/2y0nEnK
Seat Belt Bolts: Spaced 7/16" - 20 x 1.37"
Clutch Floor Assembly Screws: amzn.to/2DZ0ALK
1/4" washers: amzn.to/2DZsdEp
3/8" washers: amzn.to/2DYZcJ2
7/16" washers: amzn.to/2RqQ5Ub
★ FOLLOW ME ★
Website: pahjodesigns.com
Instagram: / pahjo_designs
Pinterest: / dodaddydiy
Facebook: / pahjodesigns
* For licensing / permission to use: Contact - info(at)do-daddy(dot)com
Music by Epidemic Sound (www.epidemicsound.com)
© Pahjo Designs, LLC
Jeremy Hoffpauir
PO Box 1155
Pearl River, LA. 70452
#Jeep #DIY #SprayBedLiner
00:00 Introduction
00:30 Remove Rust & Debris
01:20 Remove Adhesive
01:44 Degrease
02:36 Metal Etch
03:10 Apply POR15
03:49 Mask and Tape
04:00 Mix Raptor Liner
04:33 Test Spray
04:54 Spray 1st Coat
07:00 Clean Up
07:50 Bare Spots
08:00 Mixing Tip
08:30 60 psi
08:45 Mix
09:26 Spray 2nd Coat
09:50 Remove Plastic
10:12 Final Result

Пікірлер: 93

@PahjoDesigns 5 жыл бұрын

Visit my blog for additional tips/techniques and a free digital download for this project. bit.ly/2EiNTvr Thanks for watching!

@samh1764 5 жыл бұрын

Pahjo Designs does that stuff help with road sounds?

@PahjoDesigns 5 жыл бұрын

I noticed a difference bc of the age of my previous sub floor, but not significant.

@samh1764 5 жыл бұрын

Pahjo Designs have you heard of lizard skin? and do you know if you can spray the bed liner on top of that

@PahjoDesigns 5 жыл бұрын

I’ve heard of it. I’m not sure if you can, but I wouldn’t see why not as long as the surface is scuffed/sanded, it should bond to it.

@samh1764 5 жыл бұрын

Pahjo Designs ok thanks I’m thinking about doing this to my 93 Range Rover, I also followed you on Instagram on both my accounts @sam.huml and @93_rover

@geographyinaction7814 8 ай бұрын

Excellent. Kudo's for the safety reminders, I've seen far too many KZfaqrs ignoring simple safety gear while grinding or using pants and chemicals. Double amputee here. It takes a second to have your life changed.

@nicholaslanfear8421 4 жыл бұрын

“Gonna let that sit for about ten minutes, while I beat my son in a game of horse” dad level 100

@joecropper3316 4 жыл бұрын

Love it

@tjoutlaw2613 4 жыл бұрын

“While I beat my son....(pause).... in a game of basketball 😂

@jeremyoshea7941 3 жыл бұрын

Thank you for your time, the P.O.R. 15 works well it’s the best and it’s best to spray topcoat when the POR is tacky

@LocalFloridaMan24 3 жыл бұрын

Thank you! Currently working on my 91’ YJ

@fsl4346 Жыл бұрын

love it! great job!! Planning on doing the same soon to one of my project cars. very encouraging.

@Gunmetalbluejeeptjs Жыл бұрын

Awesome color came out great !

@jacobduncan5319 4 жыл бұрын

Well done! I am gonna do this to my 1963 Ford Econoline van interior, and if that works well I’ll do it on my 2016 Wrangler!

@Datdudetc22 3 жыл бұрын

Really nice job and great video

@iSleepDoc 3 жыл бұрын

Great job and thanks for tips !!!

@MrRonnie93 Ай бұрын

I've got a 2004 LJ that I'll be ordering 1.5 gallons for. I'll likely have plenty of leftover to do a drop coat for a more even texture. I'm not planning to take it to bare metal because I have no rusting, just removing the clear coat with a 150 grit sandpaper I think. Looking forward to this project. Thanks for the video.

@richardbyrum4618 4 жыл бұрын

Nice job and thanks for the video. My son and I have been prepping his '97 TJ to do the exact same thing!

@PahjoDesigns 4 жыл бұрын

Thank you! It’s an awesome project and well worth it. It has performed very well in salt air near the beach - no issues... I have more tips on my blog as well..

@Bdady74 Жыл бұрын

Good job dude!

@crossfin7399 4 жыл бұрын

this is gonna be my summer project!

@PahjoDesigns 4 жыл бұрын

CrossFin aweome man, well worth it for sure.

@jasonallen6836 5 жыл бұрын

You did a great job with the liner.

@PahjoDesigns 5 жыл бұрын

Thanks so much, Jason. It was surprisingly easy. The Hardest part was removing all the rusted bolts. I have more detail on my blog.

@EverydayOutdoor 5 жыл бұрын

Awesome video that was very well done. Going through the same thing on my 94 land cruiser right now

@PahjoDesigns 5 жыл бұрын

Thank you! It is holding up very well.

@rayaboomboom 5 жыл бұрын

Beautiful job! Thanks for taking the time to post. 97 TJ here

@PahjoDesigns 5 жыл бұрын

You are welcome! I have much more detail on my blog - link in description

@jacobgood160 4 жыл бұрын

Good vid, same product and application I'm planning. Thank you

@PahjoDesigns 4 жыл бұрын

Thanks man, good luck!

@poopandfartjokes 4 жыл бұрын

2:02 And the Jeep gets the rebound!

@r0mulyni2 5 жыл бұрын

Very very nice job, different from common black floor lining

@PahjoDesigns 5 жыл бұрын

Thanks man! It’s meant to look like sand. ;)

@explore-western-colorado970 4 жыл бұрын

Very well done I'm very impressed very nice jeep man 👌

@PahjoDesigns 4 жыл бұрын

Thank you!!!

@randythompson1957 4 жыл бұрын

This is the video I was looking for. I have a 99 tj in about the same shape. That looks like it would work well with the desert sand pearl paint job.

@PahjoDesigns 4 жыл бұрын

I’m very glad I did this. It’s been over a year since I installed it and it’s performing very well! Be sure to visit my blog post for this project as it has more detail. Blog post link is in the video description.

@ozarkdaredevils 2 жыл бұрын

How did the liner hold up ? I have a 75 jeep cj5 that I just painted the inside tube with Por-15 and was concerned about Raptor sticking . Ill try your method of lightly sanding with 80 grit sand paper before I paint . Great video , thank you .

@AdamCanFly 5 жыл бұрын

I’m going to be doing this to my 73 Blazer soon.

@PahjoDesigns 5 жыл бұрын

It was the best improvement I’ve done to my Jeep so far. Very very worth it!

@blurglide 4 жыл бұрын

Looks good- much better than black. Is it hot and noisy now though?

@jimbog8327 4 жыл бұрын

Nice job👍👍🇦🇺🇦🇺

@blurglide 4 жыл бұрын

So two bottles of raptor liner was plenty for the tub, sides, and tailgate? How's it holding up?

@deangamey2054 Жыл бұрын

What were you using to clean it off? Paint thinner? Acetone ?

@dustinbronestine1946 3 жыл бұрын

Does the smell ever go away I've had my jeep done for a couple months and it still has a strong smell to it if its been shut up for the night.

@adalbertogonzalez566 3 жыл бұрын

I am from Venezuela and I would like you could tell me where I can buy the painting but in beige. if you recommend a link. since I only see pure black color

@jasonchristman9880 5 жыл бұрын

Quick way to clean your gun put the tube into acetone and spray it until it's clean use carb cleaner for the rest works great ,I use raptor a lot great stuff,did my tundra and 3 other SUV with it

@PahjoDesigns 5 жыл бұрын

Jason Christman awesome tip! I’ll definitely use it next time

@popbox3738 4 жыл бұрын

Can i put sound skin over top raptor liner? Want to use raptorliner for the rust protection butneed to deal with sound issues on my 67 stepvan.

@GoldenK9Campers 6 ай бұрын

Does it get "dirtier", i.e does the dirt/hair stick to it at all? I've got golden retrievers.. and the hair sticks to the carpet.. so hard to clean.

@notimjw 4 жыл бұрын

How is holding up now. I am looking at this or Monstaliner. Monstaliner claims to be the only UV safe liner out on the market

@PahjoDesigns 4 жыл бұрын

It’s holding up great! Mine is out in the sun quite often and no issues so far.

@ImaSurvivorSanctuary 5 жыл бұрын

do you think it would look okay to do a black jeep with the tan liner, i think it would make dust and sand less noticable than my black interior does now

@PahjoDesigns 5 жыл бұрын

Yep, I live 3 blocks from the beach and that is part of the reason why I used this color. :)

@philbrennaman4572 3 жыл бұрын

No wonder you beat your son, he played you left handed to give you an advantage. Oh nice job on the spray in bed liner.

@jeremiahford8835 3 жыл бұрын

What kind of Chemical did you use to clean the gun between coats?

@PahjoDesigns 3 жыл бұрын

Acetone

@jordancheatham1013 5 жыл бұрын

What air compressor did you use?

@PahjoDesigns 5 жыл бұрын

I used this one. amzn.to/2pLFXZz

@lenack9365 5 жыл бұрын

How many of those bottles you ended up using? I am trying to do the same to my jeep.

@PahjoDesigns 5 жыл бұрын

All info is on my blog - I cant remember off hand. pahjodesigns.com/how-to-spray-bed-liner-for-jeep-wrangler-interior-tub/

@lenack9365 5 жыл бұрын

Pahjo Designs apparently two bottles, thank for all the info on your blog 😄🤙.

@PahjoDesigns 5 жыл бұрын

Yep, that was it. The interior tub doesn’t take nearly as much as the exterior. It was very easy to apply and it holds up well. The hardest part was removing all the old rusted bolts and preparing the floor for the spray. I highly recommend POR15 to reinforce the drivers side floor as well.

@notimjw 4 жыл бұрын

With the top on does it echo a lot?

@PahjoDesigns 4 жыл бұрын

I drive with a bimini 99% of the time. I haven’t noticed any difference in sound when I do have my winter soft top, but I don’t think I drive it enough with that top to notice.

@stevenharms338 4 жыл бұрын

What were you using to clean the equipment with in the end?

@PahjoDesigns 4 жыл бұрын

Acetone or mineral spirits.

@stevenharms338 4 жыл бұрын

@@PahjoDesigns Food for thought. Next time try not using the sink to clean your materials. That stuff goes back to our drinking water. It needs to be poured into a metal container and desposed of properly.

@ozarkdaredevils 2 жыл бұрын

@@stevenharms338 All waste water goes through a dramatic cleaning process , If you have a floor drain in your garage it ties into the sanitary drain system , which is treat and released . I wouldnt be to concerned about small amount of chemicals you poured into the drain . Stevie boy just wants to bitch !

@cg7509 4 жыл бұрын

Have you noticed any reduction in road noise, with the top on?

@PahjoDesigns 4 жыл бұрын

Yes, a small amount. However, I rarely put the top on. I mostly ride with the Bimini top only.

@cg7509 4 жыл бұрын

@@PahjoDesigns Thank you, I'm thinking I'll spay mine, but with the sound deadener

@cg7509 3 жыл бұрын

How is the liner holding up?

@mikerowley9770 2 жыл бұрын

does raptor liner work on fiberglass?

@PahjoDesigns 2 жыл бұрын

Yes, it should work fine on fiberglass.

@brianhummel8659 5 жыл бұрын

Wouldn't recommend mixing in your Jeep. If you make a mess or knock it over good luck with the finished product! Overall, decent video. Also, wire brush wheel for overall scuffing usually gives a better result.

@bonavita5683 4 жыл бұрын

Can you paint over this stuff once you place it down? I will wanna paint it back to my original color (rescue green)

@myabacon 4 жыл бұрын

Bonavita raptor liner comes in black but you can buy a tintable version to paint it any color you want. I literally just finished my 95 YJ in white

@mineduty7890 2 жыл бұрын

How is it holding after 3 year?

@PahjoDesigns 2 жыл бұрын

Holding up very well. I live 3 blocks away from the ocean in very salty air and it’s held up great.

@TheKekekabic 4 жыл бұрын

Did you really spray this with a 6 gallon air compressor?

@PahjoDesigns 4 жыл бұрын

Yes. I was worried about this as well so I called U-POL and asked them if this would be ok. They said folks did it with a 10 gallon without issue. I rolled the dice and had no issues whatsoever.