good video not sure why u didnt put wood post in ground with cement?
@jkar1978ify16 күн бұрын
Definitely ain’t in Georgia no Red Clay
@Skylark927 күн бұрын
I don't have tools for this I wish I can buy it 😅😢
@bitsurfer0101Ай бұрын
How much smaller is the rigid tubing that you used compared to the flexible tubing?
@ChadMoos-kw2gpАй бұрын
did this for an outdoor bar the epoxy is great the marine spar varnish failed
@douglasthompson2740Ай бұрын
Had you done a full vacuum pull down to test the lines before charging (Mr. Cool tells you you don't need to a huge weakness in the install) you would have found the leak most likely. That and the nitrogen pressure test can prevent incidents like this as you know after you do them you have a problem.
@venkatsubbaraosingham.4776Ай бұрын
Where can I buy muriatic acid
@camp7203Ай бұрын
Thanks!
@MrRonnie932 ай бұрын
I've got a 2004 LJ that I'll be ordering 1.5 gallons for. I'll likely have plenty of leftover to do a drop coat for a more even texture. I'm not planning to take it to bare metal because I have no rusting, just removing the clear coat with a 150 grit sandpaper I think. Looking forward to this project. Thanks for the video.
@robertjordan62822 ай бұрын
I’ve sanded up to 320 on a walnut slab. Is that too high for epoxy seal coating?
@mohammedmunir66222 ай бұрын
That was a shit climax
@jerryvega53492 ай бұрын
🔥 🔥🔥🔥🔥🔥🔥🔥
@BruhSayWhat2 ай бұрын
4x4’s? That’s crazy. You can see them bending already
@venkatakoppada3 ай бұрын
Hello, can you pls update how it's holding up after 3 years now?
@DaRandomOhana3 ай бұрын
How would I attach the tension part if I’m using metal poles and not wood?? Thanks!!
@Pondie-3 ай бұрын
I’m dosing a version of this right now. The epoxy looked so cool on its own. Like glass but the varnish shows all the brush strokes. Can I buff those out or is that the look? They don’t seem to be laying down.
@jamiecornwall-rh8rm4 ай бұрын
That it
@echo1er4 ай бұрын
You get hit with music copy rights Or no audio?
@johnellisonarmadilloconstr79664 ай бұрын
Everything but how to attach it to the ladder
@dontblameme63285 ай бұрын
Good job but you sontbsound like tour from south Louisiana...maybe you live there, but not feom there. Right?
@tidegirl65265 ай бұрын
I'm so glad I found this. It is definitely more the look I had in mind than the other methods I am seeing of sanding corners.
@mitsuomits90775 ай бұрын
It seems like he is pushing down the sander 😮. Would've been nice if the result was shown in details. Good job, though 😊
@JorgeGarcia-ej5po5 ай бұрын
how much was total cost of building the frame?
@harryanggara94745 ай бұрын
Nice work bro
@SmudgeOfficialUK6 ай бұрын
Random orbit mode.
@funnyanimals83176 ай бұрын
Loved this video...I have brown dark stained wooden counter stools that I want to antique white with a dark accent. Can I use white chalk paint or a white paint stain to wipe over the chocolate brown paint on the stools after I rough them up with sand paper?
@KellyzJaclsj282jk6 ай бұрын
How much did everything cost
@joshmajor86626 ай бұрын
I see why nobody liked this now Lol
@joshmajor86626 ай бұрын
I see why nobody liked this now Lol
@jbird736 ай бұрын
How's it holding up?
@susancooper94946 ай бұрын
I LOVE THE MESSAGE YOU SENDING TO YOUR KIDS,and I can identify bc my dad was creative with his hands as well. ❤❤❤❤ THANK YOU for sharing!
@jaredb95236 ай бұрын
Mines consistency is nothing closer
@SkipRoGlo6 ай бұрын
Great video. I want to do something like this on a smaller scale for my Train layout. I want to put a single led inside a tiny plastic bubble attached to a plastic straw which will go through multiple layers of form. It comes up at the bottom of a little lake. Epoxy will fill the lake over the light. Worried the LED 12 volt light will get too hot inside the little tube. Do you think this will work?
@GoldenK9Campers7 ай бұрын
Does it get "dirtier", i.e does the dirt/hair stick to it at all? I've got golden retrievers.. and the hair sticks to the carpet.. so hard to clean.
@asrieklasik78717 ай бұрын
thnks!!! really helpfull tutorial!
@brucepal39077 ай бұрын
Is that a rotating sander or just oscillating? Thanks
@mii20thcenturyfox267 ай бұрын
Billy ay 3:00 A.M Be Like:
@bacon104736 ай бұрын
bruh
@jjmarketing77767 ай бұрын
Any idea if this works with Daikin Mini Splits? I’ve had the hardest time getting the Honeywell D6 to connect.
@NaySeld8 ай бұрын
After all that sanding is there any wood left?
@trinidadgrowshow8 ай бұрын
Hi man. I bought the Breez Plus the other day. My problem is this. .. I created an ON schedule in the morning and disabled Comfy Mode on the said schedule. Then I created an OFF schedule for the night and added the Comfy Mode setting on it so the AC will turn on and off to keep a certain temperature range constant in the room at night (I want the AC running all day but not all night long). Problem is even though I disabled the comfy mode in the ON schedule it is still activating. I only need the comfy mode option in the OFF schedule to come on when necessary. Why do you think Comfy Mode is still coming on even though I disabled it in the ON schedule? I also tried the DO NOTHING option but it's still activating.
@geographyinaction78148 ай бұрын
Excellent. Kudo's for the safety reminders, I've seen far too many KZfaqrs ignoring simple safety gear while grinding or using pants and chemicals. Double amputee here. It takes a second to have your life changed.
@justinpaolomabitad38748 ай бұрын
What did you use?
@damienmansfield33088 ай бұрын
Did you have to install an extra stud for the mounting bracket? Did you use any blocking to keep from compressing the siding?
@andrewblack25189 ай бұрын
Just get glow sticks and save yourself the hassle. Easy breezy, 15 minutes and done!
@UpcomingJedi9 ай бұрын
How do you attach the strips so they dont come off?
@gildedpetalsdecor9 ай бұрын
You are a godsend! Creating a geode crystal table top, our largest piece to date, and needed your help lol. Thank you for sharing and narrating so clearly.
@rodneychapman1979 ай бұрын
I’m working with eastern red cedar. Out of my DEWALT planer it’s BEAUTIFUL!!!! But when I use my DEWALT random orbital sander it leaves a sort of cloudy finish. Please help!!
@colag19669 ай бұрын
Beautiful
@sergethomas885310 ай бұрын
I am surprised the HVAC guy did not vacuum the lines and then check if it hold the vacuum or better nitrogen pressure the line and see if it holds. That should have told you if the leak was within the lines or the coil. Another thing, you normally should have added R410a to the compressor since it was nearly empty. Form this, it is best to vacuum to a recovery tank and weigh the refrigerant recovered, then pump it back and add to the exact weight of refrigerant. Or better, add new refrigerant. Folks, make sure you take pictures of your serial number in and out units as they are printed on paper and don't last. Useful if you need to get the warranty. I was able to find the leak in my inside unit within the coils where the electrical is. Not sure the warranty will work as I cannot get the serial numbers (my inside unit has some of it missing and the outside unit serial is gone).