DIY Table Saw Sliding Carriage / Mobile Workbench EP 2

Рет қаралды 1,932,523

Күн бұрын

This is the second in a series of five videos about my new woodworking bench with a table saw and router table.
I'm going to show you how I built this sliding carriage to make crosscuts in a more comfortable and precise way with a table saw.
Plans for this project: bit.ly/3iRfbd9
Mobile Workbench Blog Article: bit.ly/32j9gta
Sliding Carriage Blog Article: bit.ly/3CkFVLh
All Mobile Workbench Videos: bit.ly/3C3gqhV
Where to obtain materials and tools that I use:
Multi-Function Workbench Plans: bit.ly/39eKtrr
Band Saw Plans: bit.ly/2JisRjf
Workbench Accessories: bit.ly/2OSNcKu
Follow:
/ paosonwoodwork
/ paoson_woodworking
/ paoson_woodworking
#woodworking #tablesaw #sliding #carriage #diy

Пікірлер: 531

@Paoson_Woodworking 2 жыл бұрын

Plans for this project: bit.ly/3iRfbd9

@youtukang 2 жыл бұрын

👏👏

@NickBR57 2 жыл бұрын

I'd like to buy plans but unfortunately the website only allows me to enter United Kingdom as my address and no other details. Although this is a figural purchase it requires a physical address and won't let me enter one, so sadly this is a lost sale.

@PunkR0ckz09 Жыл бұрын

@@NickBR57 Just contact him directly, he's very active on his forum and I am sure he can figure something out, maybe that wasn't thought about? I didn't have issues with my address, but I'm from Canada

@PunkR0ckz09 Жыл бұрын

Hey Paoson, to align the tablesaw to the sliding carriage, the easier method would be to wait until you have done the grooves on the sliding carriage, then measure the distance in between your sliding carriage's dado and the tablesaw's dado, cut a plywood piece of that size, put 2 "runners" in each dados and clamp the tablesaw's "runners" to the sliding carriage's runners, making sure that the runners don't stick out too much. That would align the dados perfectly (IF your tablesaw cuts straight the plywood obviously) and then you could fasten the tablesaw. I find that using your method (with an adjustable square) it is too random. Sometimes the ruler on the square isn't tightened properly, sometimes you don't reference properly to the dado of the tablesaw (mine has a very big chamfer, it touches the chamfer, not the flat wall), or sometimes you don't rest the square the same (the ruler is higher or lower, more angled) so the lenght is in theory not the same

@ladislavbago9451 7 ай бұрын

@@youtukangqqqqq

@tianwang 2 жыл бұрын

his shop‘s dust collection is so perfect that he has a rug in it.

@pf5658 2 жыл бұрын

I was about to make the same comment and then I saw yours. 😂

@tri-forceblades3123 Ай бұрын

You are extremely gifted in engineering. One idea I had that might improve on your design would be to use a rare earth magnet on the metal tabs sticking up so you would not have to focus on using your body to push the drawer in while sawing. Once it reaches the full travel of the slides it would seamlessly break contact to allow the sliding function to continue.

@AlbertNoffsinger 2 жыл бұрын

EXCELLENT! I had an idea like this in my head when building a new workbench but could not put all the parts together to see it working out well. Thank you for sharing your idea and putting it action. This will be one of my winter shop improvement projects for sure. :)

@cooperised 2 жыл бұрын

Great timing. I've been designing something similar for myself, but it's still in CAD at the moment. This bench is so well thought out, I'll be buying your plans and incorporating your ideas for sure! Edit: great price!

@scottbionicnerf8727 2 жыл бұрын

Thank you for sharing all this. This totally opens a whole new chapter in my woodworking.

@themplar 2 жыл бұрын

This bench is absolutely genius. This makes so much sense to me. Specially like the fence and versatility.

@johngaskey218 2 жыл бұрын

The dual direction slide for larger stock is genius. This is a solid build for smaller shops like mine.

@kevinsorensen367 2 жыл бұрын

That under drawer extension is brilliant!!

@johnfrazier9327 2 жыл бұрын

Great work again Suso! I love the drawer brace support for the slider. The flip up tabs to open drawer as you pull are pure genius. One thought occurred to me was instead of using your leg to push drawer back in, Pocket a stack of a couple magnets in the wood to interface with those tabs. You may have to play with making the steel tabs a little bigger to get enough magnetic purchase but it sure would make it an automatic motion.

@TheSNIPERmac 2 жыл бұрын

Sir, I just have to say, you're eye for design and detail is second to non. This is by far the best multi table design I have seen in ages. Thank you for sharing, I really enjoyed watching these videos.

@DenatBalla 2 жыл бұрын

WOW just wow! Absolutely love this table saw bench design!

@Paoson_Woodworking 2 жыл бұрын

thanks!

@9and7 2 жыл бұрын

Always a treat watching these... Great work as always Paoson....

@999erh 2 жыл бұрын

I've always been so impressed with your work. Everything is so precise! I've been thinking about a design like this for over a year now, but worry that I won't get the surface so perfectly flat like you have here. I think I'm going to give it a shot, but I'll definitely be adding a way to make fine adjustments to the alignment of the saw. ;-)

@edharrigan6992 2 жыл бұрын

Beautiful design! Well done.

@irishfanrock3494 2 жыл бұрын

Amazing project and even better video. This may be the best wood working video I have ever watched. Amazing job on the voice over explaining what and why. Great system you have come up with .

@wintersnot 2 жыл бұрын

The drawer support addition is especially clever.

@ronwoolacott8880 Жыл бұрын

Just came across your video and absolutely love this build. The best one I have found.

@markhedquist9597 2 жыл бұрын

That is a SUPERSTAR idea with the drawer underneath for added support. You never fail come up with innovative designs and details for your builds. So impressive!

@Paoson_Woodworking 2 жыл бұрын

thanks Mark!

@mariopaiva8480 2 жыл бұрын

Belíssimo projeto. Gostei muito desta bancada. Ficou perfeita.

@laurentcadieux1172 2 жыл бұрын

Just can’t wait to see EP 3

@chillyspoon 2 жыл бұрын

The drawer is such a good workaround - ingenious yet simple!

@youtukang 2 жыл бұрын

👏👏👏

@JohnnyUmphress 2 жыл бұрын

Excellent attention to detail. Beautiful job.

@manut7579 Жыл бұрын

Hello ! You resolve my questions about how to make a slider carriage ! Thanks you for all détails about how to and dimensions. Thanks you a lot, your work is vert inspiring !

@mattg6262 2 жыл бұрын

Congrats on what I think is the nicest mobile t saw bench concept I've ever seen.

@madmikemakes3056 2 жыл бұрын

Brilliant project. Really love it. You did a beautiful job.

@derekbisbing1138 2 жыл бұрын

So many great ideas! Well done

@samspade4634 2 жыл бұрын

That is one of the best ideas I have seen in a long time. Genius, pure genius. I will be purchasing plans in the near future. Great job. Man, that's cool.

@Paoson_Woodworking 2 жыл бұрын

thanks!

@borgpunx 2 жыл бұрын

Incredibly ingenious design!

@philippangst 2 жыл бұрын

Absolutely amazing! Wow! Thank you!

@theoahmwa Жыл бұрын

Thank you for the very clear instruction and a precision work.

@TheWolfster001 Жыл бұрын

Love the sliders for the table saw, I know the sled was as close as it could be, yet if the edge was much closer to the sawblade, it would be easier to cut angles & miters.. My table saw is also a slider, it is a Grizzly 14" 10HP.. Yes I know very expensive and takes up a lot of floor space.. I love your concept for the basically an all-in-one work station.. Sorry if I sounded critical, I actually love you design.. perfect for someone with limited space.. Thank you very much for sharing...

@marcodsv 2 жыл бұрын

You are brilliant, a genius...insane work there. Thanks for sharing!

@hansangb 2 жыл бұрын

That's really really well thought out! Well done

@oc_geek337 Жыл бұрын

Brilliant and exceptionally well executed!

@PR-WoodWorkingCreations 2 жыл бұрын

*2:45** Great Genius Idea, The whole Sliding System is Awesome love it!!!* 🌟😎👍 *Your Ideas Design's and Accuracy Perfection are always at Next Level!!!* ♥️👍 *Looking forward for Next Part!!*

@adrianthomas4163 2 жыл бұрын

This is very impressive!

@daahodaar 2 жыл бұрын

Oh man, this saw table is just awesome! I need to build one!

@Paoson_Woodworking 2 жыл бұрын

thanks!

@natebean151 Жыл бұрын

One better table saw ideas i seen on KZfaq

@jimchallender4616 2 жыл бұрын

Impressive well throughout design!

@jasonsodyssey 2 жыл бұрын

Best set up for a portable table saw I have ever seen

@thegoodfight365 Жыл бұрын

Of course the sliding table is awesome. I was just as impressed with how well you explained the process of each step. Many awesome products on YT but rarely do the makers explain steps sufficiently without going overboard with entertainment. In my humble opinion, that is. Thanks for sharing your work. God bless you

@josephroberts7490 2 жыл бұрын

Great job! Your professionalism is admirable.

@where_is_bob 2 жыл бұрын

when I saw the sliding drawer for supporting the sliding table, I gog goose bumps, truly genius idea

@MichaelRodgers670 2 жыл бұрын

Awesome Build! I have been looking for away to improve my cheap craftsman table saw. You know, I was watching you use your hip to push that drawer back in and I thought this might be a good place for some magnets.

@richardportelli1983 2 жыл бұрын

Great ideas, would only take me about 3 years to build this. Wish I had 10% of those tools!

@ShopNation 2 жыл бұрын

Fantastic idea sir!

@Paoson_Woodworking 2 жыл бұрын

thanks mate! Nice to see you here

@ernestomartinezespinoza9596 2 жыл бұрын

Muy ingeniosa solución! Felicitaciones

@charlier7711 2 жыл бұрын

Very nice!! An elegant solution. Thanks for sharing.

@trdavis55 2 жыл бұрын

Very clever and functional!

@jorgeconcheyro 2 жыл бұрын

Te quedó fantástico, felicitaciones.

@garymills6806 2 жыл бұрын

You do beautiful work, and it is fun to watch. Your equipment is also pretty nice.

@markielinhart 2 жыл бұрын

Wow, you just made a versatile shop tool ULTRA versatile! 👏🌹🇦🇺✌️

@youtukang 2 жыл бұрын

👏👏👏🤝🇮🇩

@andreamarletta6414 2 жыл бұрын

Just brilliant. Congrats

@wirelad1 2 жыл бұрын

Real nice and some great camera work, can't wait to see finished product

@user-dk7if6ok1o 2 жыл бұрын

Отличная работа!!!👍

@anglobricks9086 6 ай бұрын

He is a very well organized individual 👍🏻

@ChrisHornberger Жыл бұрын

Absolutely awesome. Nothing else to say.

@lennycruz4558 2 жыл бұрын

Thats not a workshop...its paradise

@rostamr4096 7 ай бұрын

Amazing design..love it

@bradleytuckwell4854 2 жыл бұрын

Your wood work is stunning and so on point.That is a awesome set up you have it’s one of the best I’ve seen in a long time.You have such an amazing channel which I get so much knowledge from and I thank you for that.

@Paoson_Woodworking 2 жыл бұрын

thanks!

@jy4508 Жыл бұрын

This is brilliant, thank you for sharing.

@Rogerino87 2 жыл бұрын

Complimenti. Sei un’artista! 🤙🏼👌🏼

@stephan1906 2 жыл бұрын

Very very very very very excellent idea!

@conkick1192 2 жыл бұрын

Good job, congratulations.

@ramosoficinadamadeira5510 2 жыл бұрын

Ideia muito boa parabéns 👏👏👏👏

@rudiopa24 2 жыл бұрын

Ein beeindruckendes Projekt!

@stealthgsx 2 жыл бұрын

素晴らしい設計と技術ですね。場所が準備出来たら真似させて頂こうと思います。 Great design and technology. I will imitate it when the place is ready.

@GrantOakes Жыл бұрын

Chess masters try to think ahead 3, maybe 4 moves, but you have thought all the way to 10! Your forethought with the support built into the drawer for the carriage being able to cut much wider cross cuts!

@scottcardais3560 2 жыл бұрын

Pretty impressive workmanship. Thanks for sharing.

@Paoson_Woodworking 2 жыл бұрын

thanks Scott!

@juniorpachieri4968 2 жыл бұрын

eres un genio , con cosas sencillas has hecho algo muy bueno !!!

@J4Julz 8 ай бұрын

Wow! This is a really great design- you have thought of every possible option :)

@pecosimplu7070 2 жыл бұрын

Wonderful . I'm realy impressed. Manny thanks for making and posting this video 👍👏👏👏 Respect maximum

@ZoltanGyulai1965 2 жыл бұрын

The drawer support is wow a great idea and the whole build is superb, thanks foe sharing

@Paoson_Woodworking 2 жыл бұрын

thanks!

@samuelyogo1864 2 жыл бұрын

I loved it great job.

@boostyler9818 2 жыл бұрын

Great Design Mr Paoson

@nguyenhuuvinh8083 2 жыл бұрын

You have a wonderful multi-function carpentry table

@ianandrews1511 Жыл бұрын

Love this series. Dhane i get so much condensation in my garage to build nice things like this.

@sazikanebaldimor2386 2 жыл бұрын

wow, I neeeeeeed that table for myself. Sooooo much. Thanks for posting your art :D

@arthurcrosby5755 2 жыл бұрын

Thank you for sharing your great video. This is an excellent design and masterful construction. I really like the flexibility that the design gives to you. Well done! 👍

@Paoson_Woodworking 2 жыл бұрын

thanks Arthur!

@user-hm7li6hh7q 2 жыл бұрын

Очень интересные идеи!! Безьупречное исполнение! Супер!👍👍👍✊🤝!!!!

@hamishwatson2864 2 ай бұрын

Fantastic work, you are highly talented. Thank you for sharing!

@bonfiliotrejoangeles3886 2 жыл бұрын

Extraordinaria visión, gracias por compartir su sabiduría. Saludos desde México

@matthewwysocki5019 Жыл бұрын

Outstanding!

@khanhmkim8878 2 жыл бұрын

You are an unique wood working engineer. Awesome table saw work station designed Mr.

@Paoson_Woodworking 2 жыл бұрын

thanks!

@aerial_camera_video_imaging 2 жыл бұрын

Wonderful channel with great ideas and excellent presentation. Thank you for sharing.

@bojidarstefchev3214 2 жыл бұрын

Amazing video, and very good skills!

@stevesiefken6432 9 ай бұрын

Nicely done! ✅👍🏻

@robcutlip1909 2 жыл бұрын

This is great!

@raffaelesala992 2 жыл бұрын

Fantastic job 👏👏👏👏👍👍

@maxbee4460 2 жыл бұрын

I admire your thought and design work of your projects. And envy your ability to get some of the items needed for said projects. I would find some of them difficult to obtain myself. I presume you have endless time to do all this, and don’t have to work for a living. I’m retired, so maybe could do similar. But I would spend more money on a better table saw, rather than using a job site saw ( with all its inaccuracies) as a base. Anyway an excellent job.

@mantynen80 2 жыл бұрын

You have a fantastic project! In 2min and 48sec, you show how to push the supporting slider to keep it with the cutting slider. Add a couple of magnets to the top of the supporting slider, and those two stays together. After that, it doesn't matter where to push. Or what do you think?

@kaushiksharma8390 2 жыл бұрын

I have been doing diy wood working for about 18 months now and see countless hours of you tube videos… this is by far the most impressive video I have seen. That is an absolutely sensational design. Pure genius!!! 👍👌

@Paoson_Woodworking 2 жыл бұрын

thanks!