No video

DIY tinyhouse steel frame how to make stud framing cheap and easy

  Рет қаралды 60,845

Robbert van Haaften

Robbert van Haaften

Күн бұрын

Thanks for watching!

Пікірлер: 53
@michaelcardona7397
@michaelcardona7397 2 жыл бұрын
Mr. Roberto (Robbert), you are right now my guru; I Live in Puerto Rico, down in the Caribbean, not trying to sound like a complainer, but the mindset down here is, if you want to build a shed, workshop or even a small home you must think cement blocks and cement; I have been literally torturing myself for the past few years because I REFUSE TO ACCEPT THAT I MUST BUILD AS EVERYONE ELSE DOES AND CANNOT OR SHOULD NOT THINK "OUT OF THE BOX". For a few years now I have been thinking of building with STEEL frames, my way of thinking is "It's a no brainer, you don't have to be an engineer, a contractor or a follower, you only need to have a clear mind; most recently I found a steel distributor (probably the only one on the whole island). I like what I see (and it's only the wall frames), but it is exactly what I need to see and how it's done by a (DIY); your project is really great, including the family input, just really nice touch; I also picked up info from the "Tiny House on Wheels in Ireland", "0.5 gauge and 0.8 gauge for studs; thank you for your excellent video and your thought's on how your going about the build; the use of a computer layout planner is simply fantastic and very helpful, could you provide the name of the program, if it's available to buy, whatever info you can provide will be greatly appreciated, again Gracias, to you and your family. Michael C.
@RobbertvanHaaften
@RobbertvanHaaften 2 жыл бұрын
Thank you very much my friend for your comment, I Wish You Good Luck with the future & your house. I used solid works but it's very difficult and expensive. I used it for my studies. You can use Google sketch up, a great choice. ✌🏽 Good luck!
@tomiskalmar
@tomiskalmar 3 жыл бұрын
Your build is exactly what I needed to see how it's done. Specially built in Hungary where I am from. Thanks so much making these videos!
@RobbertvanHaaften
@RobbertvanHaaften 3 жыл бұрын
nice! Thanks!
@tinyhouseonwheelsireland
@tinyhouseonwheelsireland 3 жыл бұрын
I had the same problem, 0.5 gauge studs, I made my own using sheets of 0.8 gauge, a bit heavier but it was way stronger, nice build so far.
@jjalandoon
@jjalandoon 2 жыл бұрын
I like what you did on the horizontal support
@grazynakaledek6228
@grazynakaledek6228 2 жыл бұрын
Het Rob Thanks for Sharing your Build Video. Nice Workmanship. Cheers from Toronto, Canada!
@abdennacerghaib4510
@abdennacerghaib4510 3 жыл бұрын
Hi,good work with family hand made.Congratulations. Regards from Algeria
@tiagobarreiros
@tiagobarreiros 3 жыл бұрын
I am amazed at how simple you make everything look! Did you had previous experience building with these materials? Great job.
@RobbertvanHaaften
@RobbertvanHaaften 3 жыл бұрын
Haha yeah on video looks that way :p was a lot of learning! Ive never done something like this before.
@joseleonardobecerra3764
@joseleonardobecerra3764 3 жыл бұрын
Respetuosamente pienso que una Tinyhouse con esta estructura es una trampa mortal, frente a una tormenta eléctrica y más aún combinada con madera inflamable,pero me gustan los diseños del leyout.. Gracias. 🇨🇴. 😁 😁 😁 😁 😁
@michaelcardona7397
@michaelcardona7397 2 жыл бұрын
Thank you so much for your prompt reply; right after I sent you the message I accessed "Solidworks" and YES it is expensive and more directed at the Engineering and Architecture professions; although i would enjoy the challenge, the expense doesn't warrant (justify) the expenditure, I will save your name, thank you Michael C.
@Mohdimranreturns
@Mohdimranreturns 4 жыл бұрын
Very clean I have seen alot of build videos your videos are by far the best I have come across. Quick question what software are you using for framing??
@RobbertvanHaaften
@RobbertvanHaaften 4 жыл бұрын
Thanks! Using solidworks.
@MrsSoulRaspberryMate
@MrsSoulRaspberryMate 4 жыл бұрын
Whoopwhoop!🔥
@FrameMac-LGS
@FrameMac-LGS Жыл бұрын
A good building is inseparable from a good light steel structure design equipment FrameMac LGS is here for change
@dragosr6074
@dragosr6074 4 жыл бұрын
Have you got any problems with the thin profiles? I think 0.5mm is suitable for drywall,not structural frames
@RobbertvanHaaften
@RobbertvanHaaften 4 жыл бұрын
No problems yet! My walls are lighter than drywall ;)
@zacpackman9186
@zacpackman9186 2 жыл бұрын
hi roberts . i have just binge watched ur build can i please ask what the dimentions of what the steel were. i know u mentioned .5 mm gage im intrested in the other dimentions of the c and d rail.
@RobbertvanHaaften
@RobbertvanHaaften 2 жыл бұрын
100x40 Uw and 100x50 Cw x 0.5mm Thanks for watching I hope you Enjoyed
@zacpackman9186
@zacpackman9186 2 жыл бұрын
@@RobbertvanHaaften thanks for the prompt reply,. i have loveed it and am inspierd to try building something with this probably a shed at first.
@scottrosko1318
@scottrosko1318 3 жыл бұрын
Very nice to see your progress and methods. Thanks!!!!! I like the music too. Who are the artists you play on your video?
@1sm08
@1sm08 4 жыл бұрын
Would love to know more about your build site. Is it a parking structure, self storage facility? How much do you pay in rent, and how do you secure your materials at the end of the work day? Thanks.
@RobbertvanHaaften
@RobbertvanHaaften 4 жыл бұрын
Hey, It's a friends parking garage spot. I can stay here for free luckily. I put all my tools in a steel box, and lock it.
@PsychNurse.
@PsychNurse. Жыл бұрын
Need to Rust proof the frame.
@RobbertvanHaaften
@RobbertvanHaaften Жыл бұрын
It is galvanized, already rust proof.
@brandenc8940
@brandenc8940 6 ай бұрын
What computer program did you use?
@SpartanpantsGames
@SpartanpantsGames 3 жыл бұрын
what is the program you use to model the build?
@RobbertvanHaaften
@RobbertvanHaaften 3 жыл бұрын
Solidworks
@jrhey20002
@jrhey20002 2 жыл бұрын
what called the matal your using ang how long each metal
@RobbertvanHaaften
@RobbertvanHaaften 2 жыл бұрын
'steel stud frame profile' 'cw100' 'uw100' 0,5mm thickness and was 3m long and 4m long
@usedcarsokinawa
@usedcarsokinawa 3 жыл бұрын
Looks great, but the background music is distractingly loud. You have inspired me, though.
@SC-vh7rp
@SC-vh7rp 2 жыл бұрын
Are you using structural or non structural metal framing?
@KAYAKBOY6969
@KAYAKBOY6969 Жыл бұрын
That is 25gauge non structural, I would honestly use 20gauge structural min 18 prefured.
@RobbertvanHaaften
@RobbertvanHaaften Жыл бұрын
Non structural
@tsyhll
@tsyhll 3 жыл бұрын
What is the stud to stud length? Is it 400mm or 500mm?
@ryanomoso7173
@ryanomoso7173 4 жыл бұрын
What are the dimensions of the metal studs and tracks that you are using? I am also currently building my diy tiny house, thank you👍🏼
@RobbertvanHaaften
@RobbertvanHaaften 4 жыл бұрын
Uw 100 and cw 100 profiles. 0.5mm thin
@brownyamastine6753
@brownyamastine6753 3 жыл бұрын
What does Uw means?
@MarinaSilva-yx8sb
@MarinaSilva-yx8sb 3 жыл бұрын
@@RobbertvanHaaften Hi! Would a C90 and U90 be also ok???
@andrimoldyansah1275
@andrimoldyansah1275 4 жыл бұрын
Can i see model from the screw...
@RobbertvanHaaften
@RobbertvanHaaften 4 жыл бұрын
It's a 13mm x 4mm self tapping steel screw.
@Damian_mtn
@Damian_mtn Жыл бұрын
Do you know how much you spent on all the framing material NOT including the trailer?
@RobbertvanHaaften
@RobbertvanHaaften Жыл бұрын
About 1000 euros I think
@adayshatradings8195
@adayshatradings8195 3 жыл бұрын
Which software r u using to design
@RobbertvanHaaften
@RobbertvanHaaften 3 жыл бұрын
Solidworks
@ThePandaBeat
@ThePandaBeat 2 жыл бұрын
That's for drywall???
@RobbertvanHaaften
@RobbertvanHaaften 2 жыл бұрын
Yes.
@markb7739
@markb7739 3 жыл бұрын
The female singer, who is she and where to get her music?.......
@CatalinaSpins
@CatalinaSpins Жыл бұрын
Same, this song is wonderful. Who is it?
@dantevanniekerk
@dantevanniekerk Жыл бұрын
moustache - nope... you lost me at the first 30sec
@user-jm6kx7fc9t
@user-jm6kx7fc9t 10 ай бұрын
so anoying this video he is playing music in the back ground how u ment to understand wot he saying grrrrrrrr
@RobbertvanHaaften
@RobbertvanHaaften 10 ай бұрын
Sorry bro
🔥 How to FRAME Walls 🤜  Steel Framing / TINY HOUSE 7 X 4,80 ✅ Drywall
16:43
The MadMan of DRYWALL
Рет қаралды 1,6 МЛН
Гараж мастерская ЛСТК своими руками СТРОИМ ДЛЯ СЕБЯ
20:31
Zombie Boy Saved My Life 💚
00:29
Alan Chikin Chow
Рет қаралды 28 МЛН
小丑把天使丢游泳池里#short #angel #clown
00:15
Super Beauty team
Рет қаралды 48 МЛН
How to Build a Tiny House With Metal Studs
10:38
TIY: Tiny it Yourself
Рет қаралды 493 М.
Setting up a metal building
26:17
Andrew Camarata
Рет қаралды 3,8 МЛН
Metal Stud Framing Box Beam
24:49
Construction Kronies
Рет қаралды 53 М.
Erecting Our Tiny House | Metal Stud Framing
10:42
TIY: Tiny it Yourself
Рет қаралды 178 М.
Steel Framing With FRAMECAD: Erecting the Frame
9:06
Living Big In A Tiny House
Рет қаралды 575 М.
DIY tinyhouse frame! steel stud construction
9:11
Robbert van Haaften
Рет қаралды 21 М.
METAL FRAMING BOX HEADER
17:33
j sanchez
Рет қаралды 460 М.
Metal Framing - Tools, Fastening Methods, Fundamentals
17:33
ArhiDac
Рет қаралды 363 М.
Metal Stud Framing Lesson.
22:45
rigo ramirez
Рет қаралды 525 М.
Zombie Boy Saved My Life 💚
00:29
Alan Chikin Chow
Рет қаралды 28 МЛН