In the last video we recapped the box rocker install I welded into the Jeep XJ back in 2018. In this video I add on some 3mm wall 40mm diameter mild steel tubing onto it. This will function as an additional slider but also provide a step so that the roof top tent can be operated without constantly opening the doors. I did this on a budget using mild steel tubing with pre bought bends that I could weld on. Sadly my friend hasn't got a tube bender that can bend anything more than 30mm diameter this was a little too big. Hopefully they will be strong enough for what I do and help protect my doors from any more dents. In the next episode we will prime and raptor line them.
@mikebarnea47894 жыл бұрын
Forgot the link for the table. 👍
@yahirtheo49763 жыл бұрын
I guess Im asking randomly but does anyone know of a way to log back into an instagram account..? I somehow forgot the login password. I love any tricks you can offer me!
@briarcoleman91663 жыл бұрын
@Yahir Theo Instablaster =)
@yahirtheo49763 жыл бұрын
@Briar Coleman Thanks for your reply. I found the site through google and im trying it out atm. Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.
@yahirtheo49763 жыл бұрын
@Briar Coleman It worked and I actually got access to my account again. I am so happy:D Thanks so much, you saved my account!
@FictionWeLiveIn4 жыл бұрын
I have to say it's really nice seeing someone work on their vehicle without a nice garage full of tools. It's cool to see you make what you have work and gives hope to all the people on a budget that watch these. Great video as always!
@WorkshoptoWilderness4 жыл бұрын
Yeah I know what you mean. I watch a lot if channels and deam of such setups. For me its basic home tools aside from borrow a welder! Thanks for watching!
@gregnorvell97304 жыл бұрын
Always look forward to seeing one of your build videos. I complain about having a 20 foot workbench and not being able to set a can of soda on it. You've built yours in a garage with a gravel floor and no heat! AMD have done a super job.
@warrenswildernesswoodlorea31514 жыл бұрын
Its always a lot of satisfaction when you can make it yourself, especially when it turns out so good looking.
@WorkshoptoWilderness4 жыл бұрын
Thanks for watching. It turned out better than I thought. Looking forward to raptor lining it.
@minordamages10194 жыл бұрын
One of the best , if not the best re- worked xj on the internet... People are cutting themselves short by not checking out your videos , great content and that's xj has turned out exactly the way an xj should turn out, wanting to continue my xj build a solid as that one, I have a 98 5 speed sport ,still a 4.0 in it and I want to keep the 4.0 jus my desire .but your Diesel xj has an awesome set up and amazing build , and the fact you actually use it only makes your progress show it's true colors , again awesome xj .👍👍👍
@WorkshoptoWilderness4 жыл бұрын
Thank you! Appreciate the comment and for watching. I have some new episodes coming up in the build series very soon.
@redith243 жыл бұрын
Haha I love the 80’s welding montage bit
@davidmartin5179 Жыл бұрын
Great job
@cakemix0074 жыл бұрын
the sliders look great! ...and the montage with slow-mo set to music was epic:)
@mainzelmannchen50733 жыл бұрын
Nicely done!
@051biohaz4 жыл бұрын
Fantastic! Loving the work are putting into the jeep and the fun you are having with it
@Mr09worthy4 жыл бұрын
Cracking video. Always followed you. Sad when you left the uk. But it's made some brilliant videos. Well done mike 👍
@WorkshoptoWilderness4 жыл бұрын
Thanks Kris, appreciate you watching!
@north.by.northeast4 жыл бұрын
Great job! When the 80s montage kicked in I did wonder if there was going to be a shot of you using duck tape then all of a sudden your jeep is a makeshift tank - I love it when a plan comes together.
@blott-mtb55284 жыл бұрын
Love the zip tie on the grinder lol 👌
@offroad81634 жыл бұрын
Looks bad ass, and definitely functional, awesome xj , I'm wanting to do a full inside job like u did, and the sliders as well , great addition for these jeeps.👍
@WorkshoptoWilderness4 жыл бұрын
Thanks! It turned out better than I thought. Should be a good upgrade for the future. Seems to make a big difference with the rocker replacement. My doors use to pop open and never close when I was flexed out.
@MrDuhfactor4 жыл бұрын
Good Job Mike....looks great!
@jcricket-vr5xr4 жыл бұрын
Looks nice very nice welding to wish I could weld that good I still have a long way to go to learn how to weld
@WorkshoptoWilderness4 жыл бұрын
I'm not the best welder but thick metal on thick metal is very forgiving. It's the thin stuff I struggle with. Thanks for watching
@Cameron97884 жыл бұрын
Awesome video Mike! They look great! Cant wait till I get one of those precision workbenches ;P Great stuff. Keep it up!
@WorkshoptoWilderness4 жыл бұрын
Haha thanks for watching!
@Cameron97884 жыл бұрын
@@WorkshoptoWilderness The pleasure is all mine! Great content!! Thanks for posting!
@Garrett0534 жыл бұрын
Nice work!
@meboerner3 жыл бұрын
You are killing me with that great sounding Diesel engine! Can't seem to find on for my XJ in the US. Would give my eye teeth to get one, my I6 gets 15 mpg at best.
@TaralgaBushAdventure4 жыл бұрын
Fun to watch, thanks Mike!
@evansautomotive3074 жыл бұрын
Nice Pajero! 6:31
@cristianflores17242 жыл бұрын
Amigo pone subtitulado porfa !! Saludos desde argentina
@cesarmg4642 Жыл бұрын
Nice idea. No excuses. I have a question, why you don’t used a 45 degrees elbow? Would has been easier? Regards 👊😎
@WorkshoptoWilderness Жыл бұрын
I started out with a 45 degree elbow but liked the 60 degree look more. Would have been way easier to just use the 45s.. I probably should have just bought complete bends though I would use what I had already bought. There still going strong thankfully 💪 thanks for watching
@gilbycoyote4 жыл бұрын
Good work, jeep looks great. Couldn’t find the link though.
@WorkshoptoWilderness4 жыл бұрын
Thanks for watching. Ah it was my dry British humour, my work bench is an old but of wood strapped to the wall 😉
@gilbycoyote4 жыл бұрын
Oh don’t worry I picked up on the humour, i just had to comment on it. Too good a deal to pass😂
@WorkshoptoWilderness4 жыл бұрын
@@gilbycoyote Ah! Its certainly too good to pass! Haha thanks for watching
@flyingfiona4 жыл бұрын
I have found i new love in my life... Jeep cherokee... Now im looking for a good project car her in sweden... I like your jeep cherokee
@Colorado-overland20204 жыл бұрын
Do u have a video where u install your hood vents? I can’t seem to find it. Thank you. By the way big fan!
@longkedah3 жыл бұрын
hi sir, how much diameter in inch for pipe ? 2inch and have or 2 inch ? and what the paint code for body colour ? look nice
@TheLoller1794 жыл бұрын
Heya, stumbled upon your channel last september. Now looking to DIY roofrack for an XJ. Do you have any vids on this, can't seem to find anything?
@brianbaldwin69202 жыл бұрын
How much? I need that! 💪
@WorkshoptoWilderness2 жыл бұрын
Are you based in Sweden? You can get them pretty cheap
@gatordave66293 жыл бұрын
What diameter tube did you use and what did you use for the rocker a 2x6 inch?
@WorkshoptoWilderness3 жыл бұрын
I used a 40mm diameter tube as it was only available in metric here. The box section is a length of 2"x2" welded to a length of 2"x4" to make up 2x6.
@gatordave66293 жыл бұрын
@@WorkshoptoWilderness awsome but what was the wall thickness i was wondering if I should get 1/8 or 3/16ths since measurements here are imperial
@WorkshoptoWilderness3 жыл бұрын
So I went with 1/8ths to keep the weight down as I used two lengths of box welded together. I couldn't get 2x6 in the UK sadly. The inner wall on the welded box section adds a lot of strength from twisting but it also adds weight. I've impacted several large rocks when crawling River crossings and it does dent the tube slightly but nothing I really care about.
@gatordave66293 жыл бұрын
@@WorkshoptoWilderness yea I think I'll do 1/8 as well not sure what that is in metric but 40mm is 1 1/2 so does your tube hold your weight good when you stand on them? I weigh 260 pounds so I may have to go a little bigger than 40 mm
@WorkshoptoWilderness3 жыл бұрын
Holds the weight perfectly. Me and the wife can jump around on them all day. I've lifted the jeep with the highlift with them. I guess they are welder onto the box in four places so they should be fairly tough.