DIY Wall Mount Shelves

No video

DIY Wall Mount Shelves

Рет қаралды 3,065

Күн бұрын

It has been some time since I filmed a video. Now that my break is over lets build some shelves for the tool shed. These shelves are mounted on the studs of the shed and use triangles for strength. These work really well for spaces that need the front totally open.
The other shelves video. Perhaps a much more to the point version of this video. • How I built my Large S...
Ram Pumps available on AMAZON
amzn.to/2EWrQHN
Also available on Land To House Website:
www.landtohous...
Help Support land To House by Paypal:
paypal.me/land...
My main camera:
amzn.to/2yryDUU
Send Mail to Land To House:
Land To House llc
P.O. Box 323
Micaville, NC 28755
See whats coming up before it hits KZfaq on my Facebook Page:
/ landtohouse
Land To House is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Land To house is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to Amazon.com

Пікірлер: 18

@LandtoHouse 3 жыл бұрын

Thank you so much for watching. If you are looking for a more comprehensive straightforward shelf install check out this video: kzfaq.info/get/bejne/jrmdpZyH1r7en5s.html

@Samcraftcom 3 жыл бұрын

Those shelves aren't going anywhere, super strong!

@LandtoHouse 3 жыл бұрын

These are definitely strong. I am gonna be putting about 1600 pounds on there so still going to put the front support. I would hate the studs to come out.

@JoeMalovich 3 жыл бұрын

Very cool! Certainly seems stiff enough.

@jamess1787 3 жыл бұрын

Yes, this. Just have to figure out how to get a waterwheel installed on it :D

@robdembski5648 3 жыл бұрын

Nice simple shelving that should be plenty strong. Small suggestion, though... You could have picked up a chalk line at the hardware store and used it to snap a level line across the wall at your first pencil mark on the stud. Then you wouldn't have had to play the balancing act with your level, support triangle, and impact driver since that reference line would be transferred to every stud.

@nintendolunchbox 3 жыл бұрын

Congrats on the promotion. Hey man. I bet you felt a bit daunted when you bought your first property or land. I know I did. It’s always a good thing.

@jllaine 3 жыл бұрын

Love the videos my friend. Just to your right as you are using the compound miter saw to cut the diagonals of the triangles for the shelves, is a hold down clamp to secure your work piece instead of having to use a scrap on the left. Hanging the supports, attach the first stud inside triangle, hold up the last stud inside triangle and a 2x4 across them. With a level across the 2x4 will set your shelf brackets level. Leave the 2x4 sitting on top of these 2 triangles and you now have a stop/alignment block for installing all the other triangles.

@LandtoHouse 3 жыл бұрын

Thanks! That clamp on the saw hits the motor on these really close cuts. So I have to use a scrap to hold those. I really like the 2x4 idea. I might have to do that today as I make more shelves.

@jllaine 3 жыл бұрын

@@LandtoHouse Glad you like the 2x4 idea and moving that clamp to the left side and cutting on the other 45° eliminated the motor/clamp interference (I have one of those saws)

@TheVonhollan 3 жыл бұрын

i would have done the two ends of shelf first then used a board between the ends. so all you have to do is get them to your board

@Paulie1232 3 жыл бұрын

Its looking good

@LandtoHouse 3 жыл бұрын

Think you. I need to finish all the others so I can get my boxes in. Yes I had a certain cold that was very common in ....2020. Lasted for about 2 weeks.

@Paulie1232 3 жыл бұрын

@@LandtoHouse thank god it wasn't COVID

@LandtoHouse 3 жыл бұрын

🥶 I got that. Actually my whole family got it. For me it was not bad. For my mom it lasted over 1 month.