Thank you so very much for putting this on KZfaq. I am a single mom and I went to the store and was able to buy the parts for $35 and it's saved me the Appliance housecall of $125 and I'm sure the part would have been much more. I really owe you thank you so much.

Thanks much. Can't wait to disable that darn switch. I am 67 and even as a child I was never dumb enough to stick my hand in to the washer when it was on the spin cycle!! Hard to believe anyone is that stupid but then they have alerts on strollers now a days to take the baby out of the stroller before folding it up! (NO KIDDING...they really have that printed on stollers!! )

Watched 99 stupid videos on fixing washers before finding this one. This was perfect btw - thorough.yet to the point with a variety of options. Excellent job! TYSM 🙌

OMGOSH, even though you posted this 9 years ago? It helped me fix my washer just now without a repair guy. Thank you thank you thank you! What an easy fix! now I just have to order the part, but I was able to finish my load!

I did just what you said and it worked!!! Thank you!!!! I'm a single mom and have to do things myself.. I even fixed my toilet too!!!

Thank you for posting this DIY trick!! Hubby and I bought a 2nd hand washer/dryer and the switch broke after the first trial run (fragile plastic). This was sooooo helpful and works like a charm - THANK YOU!!!!!

Thank you sir. Exactly what I needed for my ancient Estate (Whirlpool) machine. I knew it was the switch but had no idea where to start. 30 minute fix.

David, thank you for the information. I was actually thinking of cutting the wires to the switch, but you just showed me I don't need to. Now I can bypass the switch until I get a new one. Thanks again.

Thanks a ton! I had a load of laundry stuck in the washer. Knew enough to get the top of the machine off and get at that stupid switch. Bless corporate design and their little fiddly bits of plastic that snap at the first sight of strain. As I was doing the teardown, the little shit popped right out of the enclosure into my hand. I am perfectly ok with manually flipping the new, and vastly improved IMO, "lid lock" now and again... Thanks so much once again!

Thank you, thank you, thank you. I have been trying to figure out how to bypass the lid switch on my daughter's washer but it did not look like any of the others as it lacked the connector you plug/unplug. Watching your video I knew which wires had to be connected to complete the circuit and we now have a running washer. I am sure my daughter will be delighted when she gets home from work to know she can now washer her clothes again in her apt and repair cost nothing but time!

I almost buy a new washer machine, thank you for sharing that valuable knowledge🙏

Thank you for this video, I was able to get my washer running again thanks to you.🤝

Check the lid switch rubber bung. Take it off and try the machine. On my Kenmore the bung is a white rubber doughnut about a half inch in diameter and about 1/4 inch thickness and it is mounted on the lid. Trim the bung and there is a chance everything will now work. Use an ohmmeter to ensure that the circuit is being completed. I also used a screwdriver to hold the switch down. I put the machine to Spin. Pulled the on-off switch and it ran.

Fixed mine...Kenmore Series 80...bypassed the switch for now. Thanks!

This video was perfect for me. I fixed my washer easily after this. THANK YOU for your help.

Finally, simple, perfect, easy. Thank you.

Thanks for the tip. I cut both the grey and white wires placed them together and bamn it began working.

I really enjoyed your tutorial on repairing/ replacing the lid switch. Mahalo (thank you). I followed your tips and found it a breeze to replace the lid switch. Again, Mahalo, Cliff

great video...I had the exact same problem....exact same machine...ya made my wife happy.. thank you

If the manufactures were actually concerned about injury from a running washer, they would use a decent quality switch that would last the life of the machine without failing. Then there would be no need to bypass this switch.

Thank you, just executed this fix and it worked great !! Stay safe everyone and happy laundry lol.

I had this problem but the switch and the connector melted. I cut the connector of and wire nutted the two wires together and actually connected the ground to the chassis

Blessings bro. This video saved me $500

what do I do with the grounding wire though if I cut the wires because the connector cracked and wasnt good anymore?

You’re the shit thanks just cut the wires and tied them together.

My Lid switch clicks, but when I check it with Multi-meter, it is discontinuous. So I took your advice and connected a small wire between the 1st and 3rd -non-Green Wires in that wire harnessing coming from the Control Board going to the Lid Sensor. It did not work. It restarted it at rinse, and filled up a little more than the level it was at, but the spin cycle it did not work and now still have water in my machine. What would look at from here?

Just like looking at the instructions after you put something together, I'm watching this after jumping the wire harness on my washer with a piece of 14g wire.

Could this mess up your controller board or start a fire? Thanks!

Love your video. Anyone ever tell you that you kind of sound like Norm MacDonald from Saturday Night Live?

I'm doing this! Stupid thing is driving me crazy. Tape it up when all done.

Why dont you just place a screw or nail in the groove of the switch to keep it constantly on? Safer 😅

Do you have venmo? I want to send you money as thanks for saving me so much! This fixed my Whirlpool model wtw5000dw1. Machine would flash "sensing" and click at the lock 4-5 times and not start. Diagnostic test said lid lock. I figured I needed a new lock assembly so I had nothing to lose opening the lock and removing this clip. Worked like a charm.

Thanks lot sir u saved me a new dryer bless u

Do the plugs ever go bad? Not getting meter reading on either

So connecting the wires will not cause a fire or blown circuit

Thank you!!

Can you tell me which one it’s better I buy a replacement part but the plastic that is made of it’s very cheap and low quality and I last for Less than 2 months I only pay 30 usd but it’s not fun just to buy it for 2 months are there is any brad you recommend or model That have better plastic quality

Thanks!

how to bypass 4 wires red,white,blue and yellow

Thank you for the tip 5 Minute fix

What is the part called that fits into the lid switch? That particular part does not seat properly in the lid switch.

Got it got it got it got it.

Thanks for your help

When replacing this type of lid switch, raise the door to disengage it from the switch under the cabinet. Might save you from breaking the new switch when reinstalling.

Try to make the video blurrier next time - if you can.

so do you cut and splice together the gray and white or the gray and green wires?

Thanks worked for me as well.

unplug from the wall first , but great vid ...

Norm MacDonald fixes washers??

Would changing the lid switch be the same for an Amana having a computer (Motherboard or something).

I replaced the switch and still no go! Any suggestions? Tia.

Kelmore wash will not come on .i ck outlet and braker box both ok. I has no light at all come on.

Thanks for the video, could anyone out there help. I have a Maytag washer with a bad lid switch. Do anyone know how to bypass a 4 wire lid switch? Red, blue yellow and white. Thanks in advance

how can i recongnize the wires that i have to jump?

My lid lock wires are red, white and blue. Does that quick fix still work ?

thanks bud good job!

THANK YOU FOR YOUR VIDEO

Outstanding!

Awesome thank you!

Thanks! It worked for me 🙂

What is the part number for the wire connector that is connected to the lid switch ( Black connector)?

thanks

thanks bud. work's

where did you get the 12 gauge wire?

Yahoo