Broken Lid Switch Washer Repair - Kenmore or Whirlpool

Рет қаралды 563,567

7 жыл бұрын

Whirlpool 3949237 Lid Switch → amzn.to/2je9Yiu
Always unplug your washing machine before you begin working on it. The lid switch is a very important part that should be replaced and not bypassed. There are obvious dangers from running a machine with the safety switch and many news stories of tragic results involving children. I noticed videos on youtube showing how to do it and it is not something that I would feel comfortable sharing with others because I know many people will permanently bypass it and I don't want to be the one who told them how to do it when something goes wrong.
My other lid switch video → • How to replace a washe...
SUBSCRIBE→ kzfaq.info?sub...
•••••••••••••••••••••••••••••••••••
Disclaimer:
This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end-user/viewer and not AdamDIY and or Adam Hill. If you rely on the information portrayed in this video, you assume responsibility for the results. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.

Пікірлер: 241

@EvaJurisson 2 жыл бұрын

Hi Adam this is Eva. I am a disabled 61 year old trying to save as much money as I can living alone. I had the same washer and ordered the same part. I was able to get it done. It took two days though. I will not cuss but that ground wire screw was a aaaaaa pain. At least I know now that I will struggle with it again some day. You are my hero. It took me long because I needed a 5/16 socket and ratchet. I had to wait until my brother in law could get my father's for me. But job is done and now to get back to clean clothes. Thank You so much for the help.

@jeffpatterson8344 Жыл бұрын

I fixed my washer with your instructions. I kept my phone handy to review as I went along. You saved me $400-800 thank you!

@prenthamorgan3527 2 жыл бұрын

I just did my repair this morning and it didn't take long at all. I didn't use the adjustable wrench. I used a 8mm socket wrench and it worked great. This video is very helpful for all DIY people like myself. Thank you so much for this repair video. I'll keep your videos in mind the next time I need to fix something.

@bythesea8439 6 жыл бұрын

Thanks! This worked for me. Mine was an old Kenmore (made by Whirlpool). Only had to remove 2 screws on the lower front panel to to lift it up and disconnect the wiring harness. Most difficult part was getting the ground screw off---used the wrench as you suggested but hard to work it when you can't see it!! Now the spinning stops when you lift the lid. Back in business 👍 👍.

@MickieMuellerStudio 3 жыл бұрын

I think you just saved me over $100!! This was really helpful, my husband and I are going to order the part shortly! Thanks for being so clear and concise, excellent video!

@jeneepetri 4 жыл бұрын

I love your video editing! Thanks for making this so clear and concise! Well done - very helpful!

@markchapel 2 жыл бұрын

PERFECT video!! To-the-point, no nonsense, exactly and only the information I needed. THANK YOU SIR!!!

@CaptTeamwork Жыл бұрын

Any way to pop up the whole lid to make this easier?

@chrismerrett8318 4 ай бұрын

Tried to figure this out myself, glad there are guys like this who take the time to make a video for people like me who have never been into appliance repair... worked great, thanks Adam

@stevenkiefer9906 3 жыл бұрын

This video helped me with looking and assessing what was wrong with my washer. The lid switch had come apart into two pieces and was no longer able to be activated. Took the switch out, put it back together, reinstalled, boom fixed. Thanks a lot!

@ToniDeMeza76 6 жыл бұрын

Thank you so much for this video!! I was able to replace my lid switch myself with the help of this video!! :)

@Jettemaus2 7 жыл бұрын

Thanks. Used your video as a guide and the washer is up and running again. Tip for others is to use a 8mm gearwrench on the ground screw to make it less difficult.

@karlbe8414 11 ай бұрын

After watching your video 2x's, and receiving the part, I just finished the installation on our triplex's Roper coin op machine. On the old switch was a small piece of steel shielding. I was delighted that this little piece indeed snapped onto the new

@4321grp 6 жыл бұрын

Thank you for the video, The new switch cost $5,99 and I replaced it today. Washer works great now.

@melanieburke2716 2 жыл бұрын

Man thank you so much for this, I'm a new homeowner and figured I should try fixing my washer myself just so I know it's done. This helped a bunch!

@girlbaka 7 жыл бұрын

Thanks to this video I was able to find the right lid switch and replace it. Thank you so much!!

@yukahwang9985 7 жыл бұрын

Thank you very much! I watched several videos before fixing my washer, but yours are the best. My washer is working well now. Thanks, again.

@davidweum Жыл бұрын

My AMANA goes through the second to last function it does do the final spin. The lid switch seems fine. The girl who sold it to my said it's just a programming problem. After my 100th reprogramming effort it still does complete the final spin so I must pull out the heavy wet feather filled duvet. I have the duvet hanging on my door. In a day or 2 itll be dry enough to put in my dryer. I put a small load of cloths 1 hour ago and reprogrammed it yet again ( heavy, normal rince) and just waiting to see if that worked. I'm not hopeful! I had it unplugged to factory reset my washer.

@davidweum Жыл бұрын

Mine does everything except the last, final spin!

@nitamariehallman750 Жыл бұрын

Thanks for explaining step by step how to repair the lid switch. Excellent video.

@0MusicalNightmare0 4 жыл бұрын

Followed your directions and got my washing machine working again. Thanks for uploading this video!

@peterpage1130 6 жыл бұрын

Excellent video on the likely cause, as well as the repair to the 'no spin / no drain' problem.

@robertgrimm2389 4 жыл бұрын

Your video really helped me out today, thanks!! You explained it well and the fix went smooth. The only thing I did differently, was spliced the ground wire. I cut the old ground wire and spliced on the new ground wire with a crimp cap. Then I zip tied the ground wire it to the gray wire sheath to keep in in place. Thanks again.

@ontheotherhand7627 Жыл бұрын

Smart!

@amandaandrus2540 5 жыл бұрын

Your video was very informative. I just fixed my washer using your video. Thanks!

@jahmed525 Ай бұрын

Thank you so much for making this video. I needed this exactly since my washers lid switch broke and was not 100% sure how to replace. God bless.

@susanmoser8864 5 жыл бұрын

Thank you very much. Appreciate the info. & def. appreciate your concern of safety & the safety of others.

@rachelmurphy6489 7 жыл бұрын

Thank you for doing a video on this. I was washing my daughter's bed sheets this morning and the washer was running fine at first but then started making a hard banging noise and after my husband tried to fix it the noise got even louder and then he looked at it and it stopped working. I went to check it and it had rinsed the clothes but water got trapped in a mattress cover that was in there and it got caught under the agitator and was wrapped around it a bit so I dumped the water out and then tried to start it on the rinse cycle again to get the water to drain from the bottom of the washer and it wouldn't work and the lid wouldn't click when I closed it. I think this video would be very helpful as we have the exact same washer and dryer that was recorded in this video. I will say that in the description below the part you ordered is a number off from what you showed you were going to buy in the video. It got me confused but I am going to buy the part you suggested in the video. Thanks again!

@bstanford 3 жыл бұрын

I'm going to suggest (which the creator can't), but if you've gone this far, you can go ahead and just snip off the plug for the switch and hard-wire it together and work with a disabled lid-switch. It saves $4 on a generic part and up to $40 for some of the older genuine factory parts, plus it saves a load of time.

@priceandpride Жыл бұрын

Yes

@truthh8322 Ай бұрын

Which wires do you had wire together? There's 3

@jimcarney2445 6 жыл бұрын

Excellent easy fix great video -Only thing different I used a small ratchet to take out that little ground screw . Thanks a bunch!

@robguetre2426 5 жыл бұрын

I gave up on the ground screw and attached the ground wire to the back panel, hoping that this is just as safe -- I mean, it's part of the same steel cabinet -- right?

@taarchuleta7107 5 жыл бұрын

Adam, your video helped me save money. Thank you!

@CurryMouth 2 жыл бұрын

Thank you a whole lot. You have been of tremendous help. Keep up the great work!

@MNtoCali 4 жыл бұрын

Great video helped me troubleshoot and fix the problem which was the broken switch!

@kchris5326 2 жыл бұрын

Thanks for the instruction. Replacement went very smooth. The ground screw was a PITA, but other than that it was a piece of cake.

@harrygreenberg7322 19 күн бұрын

Thank you so much 0:03 0:03 Adam-I struggled with the procedure a little bit different than your washer..I had to remove some plastic covers before I could see the screws... there were a couple of times when things weren't really working but I persevered and I'm very very grateful to you for making this video. People can generally do more than they think they can but they lack confidence-😂😂

@percyjackson2800 5 жыл бұрын

Thanks. You save me quite a bit of guesswork. Easy fix.

@mattedwards4533 2 жыл бұрын

my switch just went out. I removed the old switch but didn;t know how to access the plug in end. Your video helped me. Thanks friend for the directions.

@ontheotherhand7627 Жыл бұрын

Did it! I watched one video that recommended disconnecting hoses, pulling machine out, and removing the cabinet. I decided to try your way first, and even the grounding screw was not as bad as I'd feared it would be, although it was threaded opposite to the righty-tighty/lefty-loosey mantra. Thank you.

@ontheotherhand7627 8 ай бұрын

Hey, I'm just happy that I didn't drop it inside the cabinet! 🙃@@rsinj

@anaordonez4890 7 жыл бұрын

Great job, thanks, greetings from Mexico.

@ke6bnl 5 жыл бұрын

thanks for the video helped me get the part out BUT I removed the two clips at the back on the top and the whole can moves away from the washer to access the parts.

@alokvaria 4 жыл бұрын

Worked for me, thank you so much. Awesome video and explanation.

@jasonkane4639 4 жыл бұрын

Thank you! Saved me a lot of time and money!

@normfredriksen1381 7 ай бұрын

Excellent video. Thank you. You gave me what I needed for a clean replacement.

@elialuz0307 3 жыл бұрын

Thank you so much 😊 You solved our problem with an easy to follow video.👍

@onemanwreckincrew 6 жыл бұрын

Thanks, did the trick for me but I had to route the tie wrap 90 degrees ... still worked.

@SeanByrne 4 жыл бұрын

Rather than squeezing underneath and working with little space you can slide the top metal plate off by unclipping it on the rear left (the brass clip). Super easy.

@caranaxtube 3 жыл бұрын

Just a perfect explanation!!! Congrats.

@davidmorris5752 7 жыл бұрын

thanks for the info, saved me time and money.

@dontcallmebrave Жыл бұрын

Thanks for saving me from tearing apart my timer to clean the contacts, I double checked and the lid wasn't clicking but shoving a screwdriver in the slot moved the switch far enough to make it click (and let me finish this load lol). Double checking the part # when the load finishes and ordering a $19 switch that can be here tomorrow instead of what would've been a $250 used timer on ebay that would take 2 weeks ☺ Thanks again!

@tiberiuskirk739 3 жыл бұрын

Also just pop the big gold clips that are visible once you pop up your control center. Very easy with a screw driver just pry them up . The whole cover will just pivot down or come off. I did this on my kenmore with help of your video. 👍

@CorkyStClair-jf1ry 2 жыл бұрын

Thanks again! I did this 2 years ago and today I had to replace the "new" part again. At least it took 1/2 the time today, and I didn't drop the ground screw this time!

@patcomeaux9962 7 жыл бұрын

This is the best on how to replace a Lid Switch

@nelo702 5 жыл бұрын

Thanks for the video! that's exactly the repair I need to do.

@asilang1986 Жыл бұрын

Thank you you save us 800 bucks! we got the lid switch for only 8.99! My husband was very patient and he was able to do it! thanks a lot!

@jenniferingram7834 Жыл бұрын

Thank so much for making this video!!! You saved us so much money!

@ToolmanThe48 5 жыл бұрын

thanks for the info kept me from making a big mistake!

@hachau9816 7 жыл бұрын

Good job ! Thank you.

@georgedavall9449 Ай бұрын

Awesome Adam !!!!!!!!!! 😊👍

@sarahmiller1145 4 жыл бұрын

Thank you for your video. My washer is a bit different Maytag W10150597A lid switch. Any suggestions

@ronnycornejo1728 6 жыл бұрын

Thanks for the video I will use as a guide to replace mine

@8825able1 15 күн бұрын

Thanks for posting, big help!!!

@coryfried4657 3 жыл бұрын

Thank you for the video very appreciated saved a lot of money not having it done by a commercial labor love KZfaq

@erinholland2410 4 жыл бұрын

Great fix for less than $10. Thanks so much!!

@laylowtayloe5424 Жыл бұрын

Thanks! Got the old switch out and new one ordered

@jacquiramsey4599 2 жыл бұрын

Thank you for this video. Took me about 25 mins only because I had to remove the casing...it was too tight to reach under there for me.

@luuiispereira 5 жыл бұрын

Man thank you so much!!!!! This was really helpful.

@niloisabelo 5 жыл бұрын

Thank you so much, this is a great help.

@derwinbeasley5398 Жыл бұрын

Look at the angles! You gotta be impressed with this one!!!

@RajKumar-bc6up 2 жыл бұрын

Thx bro. Your video saved me couple a hundred..🙏

@reginaldritchie314 5 жыл бұрын

Perfect! great video.

@midulcesrecuerdos 4 жыл бұрын

thank you !!! have a great 2020

@fromcraft2cure 5 жыл бұрын

Thanks! This helped a single woman be able to fix her roper washer lid switch herself! ☺ It was a bit of work trying to get the grounding wire unhooked, but easier than when I replaced the water pump. So happy I did not need to move my washer out to get to the back screws....that was what I thought was going to be my biggest challenge. No moving!!! YAY!! Thanks so much!! (This saved me a bunch of $$$!)

@hkk3656 3 жыл бұрын

Single woman or man...doesn't matter. It's a pain having a spouse ask you every 10 seconds "is it fixed yet?"

@throwaway-ds6yg 3 жыл бұрын

Girls go tech! 🙂

@TheJeRahim Жыл бұрын

Thanks Adam

@derwinbeasley5398 Жыл бұрын

I’m your #1 fan!

@jessicaperrin3133 Жыл бұрын

Wow ! Super useful ! Thank you !

@SANTANA1deep 5 жыл бұрын

Thank you so much for your help.

@agustinmex6986 5 жыл бұрын

Thanks. Wish i saw this video before i stuck my hand in to pull out the switch.

@Me-xs2ck 3 жыл бұрын

Thank you! My washer works perfectly!

@pavlom.1076 6 жыл бұрын

Thank you.

@jayzahn7474 6 жыл бұрын

Good video, but as some others have experienced, the ground screw is almost impossible to budge. Had to use my bare hands and a hammer to even get it to turn. Crescent wrench, as in the video, was ineffective. By far the most time was spent on this.

@honeydew941 3 жыл бұрын

This is where I'm stuck. How did you use a hammer? Help!

@tashagailys 2 жыл бұрын

I’m having the same problem!

@DynamicPriest Жыл бұрын

Taking off the whole lid was a better solution to taking that ground screw off

@oscartysonjr5500 6 жыл бұрын

Thanks your video was a big help.

@lisadunn9696 6 жыл бұрын

THANK YOU

@ppaulsplace 5 жыл бұрын

Excellent, perfect and you don't have to take the cabinet top off. Thanks for making this video.

@colbywillett1891 3 жыл бұрын

Thanks for the mystery hint worked like a charm :) :) :)

@ericberger394 Жыл бұрын

I needed one for a year or two ... But that is when My Hillbilly Side came into activation😆😆😆But NOW I Am In REAL TROUBLE!!! Thanks A LOT for making this Vid, Buddy!!! You are a life saver!!!

@Anitadubi Жыл бұрын

Thank you!!

@jeffcoolhd 6 жыл бұрын

Great job thank you

@nickeltabs 5 жыл бұрын

thanks, yours are the best.

@jamesblackwood4135 3 жыл бұрын

Hi, that was very helpful. The thing is I have one of those appartment size dual standing machine. Dryer above, washer below. That's the lid switch that needs to be replaced... A Worldpool model. Can you do a demo for those of us having this problem. Thanks, appreciate you.

@ut8765 5 жыл бұрын

Grate diy. Thanks!

@ThePoolSharkWizard Жыл бұрын

Very Helpful Thank You! :)

@markbrooks8500 8 ай бұрын

This will be the 2nd one for this old washer but it works so well . Thanks one question does this Roper have a filter 🤔 thank you I subscribed

@sparkyd82 5 жыл бұрын

Can you do a video on how to get those white pesky wire connectors with the double tabs apart.

@roncandelaria3703 2 жыл бұрын

Juat another big THANK YOU.... a very nice video!

@jaysrh5342 5 жыл бұрын

Ordered mine off Amazon. Grandma's wash machine in her shop broke and I gotta fix it before she funds out lol simple fix for sure.

@christiand7437 5 жыл бұрын

Good job bro

@reemoe23 2 жыл бұрын

Great video, but where is the link to Adam's video of the other model of lid switch? My Whirlpool uses the other style. Thanks in advance!

@imaginepeace46 6 жыл бұрын

Sir, I thank you so very much !

@clarahite6849 3 жыл бұрын

Thank you I'm gonna give it a try?

@AntoRodri 4 жыл бұрын

Great Video, thank you so much

@TheChrisGuyot 5 жыл бұрын

How did he find the part number for the lid switch for his specific washer model?

@nerrissapitts2650 2 жыл бұрын

It worked💪🏾💪🏾💪🏾 great video saved me a ton of money for 10.00

@magnuslord Жыл бұрын

Informational video.