DIY Wood and Resin Rings

No video

DIY Wood and Resin Rings

Рет қаралды 14,512

Күн бұрын

This is my method for making Resin Cast Wood Rings. This is a step by step DIY. This process can be used to make pendants as well, or anything for that matter! Now I do have a few specilty tools for this project, but the instead of a press to break the wood you could use a vise, and before I had the sanding station I used the Dremel and plain sandpaper flat on a table, be resourceful. We used to have one of these rings from the brand Secret Wood and it was lost, so after a stroll through ETSY I decided I could recreate it and this is the result of DIY!
Questo è il mio metodo per creare anelli in legno di resina. Questo è un passo dopo passo. Questo processo può essere utilizzato anche per creare ciondoli o altro! Ora ho alcuni strumenti speciali per questo progetto, ma al posto di una pressa per rompere il legno potresti usare una morsa, e prima che avessi la stazione di levigatura ho usato il Dremel e la carta vetrata su un tavolo, essere piena di risorse. Avevamo uno di questi anelli del marchio Secret Wood ed era tutto perso, così dopo una passeggiata attraverso ETSY ho deciso di ricrearlo e questo è il risultato del fai-da-te!
The Stuff:
Duck Brand EZ Start Tape: amzn.to/2IoPaPc
Amazing Clear Cast Resin: amzn.to/2GppgsU
Jacquard Pearl EX Powder Pigments: amzn.to/2Kspphv
Castin' Craft Transparent Resin Colors: amzn.to/2rI02kY
ArtnGlow Resin Glow Pigment: amzn.to/2Iobpoa
My Dremel Tool: amzn.to/2IqTFZz
Wen 10" Drill Press With Laser: amzn.to/2rMlZyb
Wen 4"x36" Belt and Disc Sander: amzn.to/2IkIV2Z
Bubinga Wood: amzn.to/2IlQBxI
The 99% Isopropyl Alcohol: amzn.to/2wSXWDV
No need to grnd off needle tips with these: amzn.to/2Io5FLh
And a great Shop Press: amzn.to/2IrN2q0
Music by Epidemic Sound (www.epidemicsou...)

Пікірлер: 37

@CookingGuy815 4 жыл бұрын

Amazing !!! Good Idea

@magikdust2095 4 жыл бұрын

The ring you showed in the video thumbnail was different than the ones you made in the video. I was really hoping to see you making the one that was in the video thumbnail. Even though they are similar, there are differences. So I was disappointed this video didn't show how you did the one in the thumbnail. You should make sure your video thumbnail is showing what you are actually making in the video... other than that, it was a good video...

@beanub1 5 жыл бұрын

Yooooooo man those rings are spectacular with the bubbles! Looks galactic , great work my guy

@DavidWTube 5 жыл бұрын

Hey thanks!

@rob1bm 6 жыл бұрын

really cool, thanks for the tips

@DavidWTube 6 жыл бұрын

Robinson Marroquin Thank you for watching!, and the kind words!

@mozemoze6858 6 жыл бұрын

dude you really need more subs! awesome work, you have one of the most underrated channels on KZfaq

@DavidWTube 6 жыл бұрын

Thanks! I have only been at this for about 3 months. I have a lot to learn. Getting people to hit subscribe is a real challenge though

@Potts2k8 5 жыл бұрын

@@DavidWTube new sub here dude, been needing something a little more beginner friendly 👍

@jasonhitchon69 4 жыл бұрын

When spraying the clear coat try putting them on a bent wire in a drill on low speed then spray.

@DavidWTube 4 жыл бұрын

That's genius! Unfortunately I quit making these rings, and that's why I made the video, when people ask me for one I send them a link to this. They are really cool, but super time consuming.

@stutopian 5 жыл бұрын

I appreciated the level of verbal detail in this video. Listening to others explain/justify their decisions can be enlightening. Does the clear lacquer age well?

@DavidWTube 5 жыл бұрын

Thank you! It does age well. I have only had one fail on me and I think personally that it was actually the resin that failed.

@rknissel 4 жыл бұрын

Wondering if the portion cut off when narrowing the block for a ring was made into a pendant? heck 2 items out of one block...

@DavidWTube 4 жыл бұрын

Out of one block I used to do, 1 ring, 1 pendant and 2 earrings.

@rknissel 4 жыл бұрын

Nice ! thanks for sharing your methods and techniques

@Kirbykfed89 5 жыл бұрын

Kinda late to the party but I just wanted to say nice work! Ya did pretty good at explaining everything. Only question I have is ....is the heat pad necessary in the fish tank or could you just use a heat lamp or nothing at all? Jw

@DavidWTube 5 жыл бұрын

"Necessary" no. It is super helpful though. Its great for helping with bubbles as they can rise to the surface better in a warm environment. It also helps to put the molds into the tank a couple hours before you pour them. With the wood nice and warm it also helps with bubbles escaping.

@Kirbykfed89 5 жыл бұрын

@@DavidWTube Can you get away with a different heat source? How expensive are those heat pads?

@farmvillainnla7745 5 жыл бұрын

Very cool idea using the syringes to create swirls and Injecting depth into the resin 👍🏻 Perhaps use a blow torch or heat gun to flash out the bubbles in the mix? Although I think a certain amount of bubbles give depth and point of interest, also do you think you’d get a clearer resin if you were to put the liquid mixture in an ultrasonic jewellery cleaner? I’m just curious as to whether it would cause the bubbles to rise and explode on the surface ¯\_(ツ)_/¯

@DavidWTube 5 жыл бұрын

A jewelry cleaner would probably work well! I have changed my method slightly, now I put the wood blocks after they are taped into molds into the core tank and let them get nice and warm. I then pour the resin in on the warm wood and it really helps get the clarity up. You can additionally use a heat gun on the outside of the cup before you pour the resin to get a lot of bubbles out. I can't stress enough not to blow a heat gun directly at the resin as any particulates in the are will be blown into the mix. A hair dryer is also a good tool for this job as it operates at a lower temperature then the heat gun. You can also put the molds in the oven before you pour them at 125 degrees fahrenheit.

@bigmanyeeyee707 5 жыл бұрын

Can paint be used to substitute the dye?

@DavidWTube 5 жыл бұрын

I tried that on the first few as an experiment, and ultimately had issues with the resin not hardening properly. I tried acrylic and water based.

@carrgiuse 5 жыл бұрын

Ciao cosa usi per eliminare le bolle d'aria?

@DavidWTube 5 жыл бұрын

Dopo averlo versato in chiaro, tocco leggermente lo stampo sul tavolo molte volte per lavorarlo in superficie. Trovo che questo funzioni meglio, come si deve ottenere la resina epossidica nelle valli di legno rotto.

@DavidWTube 5 жыл бұрын

Spero che abbia senso. Sto utilizzando Google Translate

@carrgiuse 5 жыл бұрын

Grazie mille per la risposta. Google traduttore è ottimo. Ma la resina a quale tempertura la usi?

@DavidWTube 5 жыл бұрын

la temperatura ambiente va bene circa 70 ° F. Direi che 80 ° F sarebbe l'ideale per rilasciare eventuali bolle dalla resina prima di iniziare a versare. Questo è tra 21 ° C e 27 ° C

@musicanimal-uh8gn 6 жыл бұрын

Cheak out the channel peter brown it will give you some good ideas

@newlanky2 5 жыл бұрын

terrible filming, to dark out of focus and loads of bubbles in the ring.......

@DavidWTube 5 жыл бұрын

Hey thanks for the positive reinforcement I really appreciate it

@DavidWTube 5 жыл бұрын

I subscribed to your channel, so when you do a better job I won't miss it!

@farmvillainnla7745 5 жыл бұрын

David WTube I would have subscribed to his channel as well... but if I wanted to listen to an asshole I would just fart.

@DavidWTube 5 жыл бұрын

@FarmVillain NLA I subscribed to your channel too! Thanks for the sick burn bro!

@farmvillainnla7745 5 жыл бұрын

David WTube my pleasure my friend! Keep making awesome videos, we are not watching for perfection we are watching to see the evolution from start to finish, and don’t listen to haters matey, anyone who has the stones to film their work and put it online should be praised not dragged down, looking forward to more videos from you 👍🏻