Save old paint in ONE HOUR? Polishing made easy with these simple steps

Рет қаралды 23,660

Жыл бұрын

Want to make more money when you sell your car? Want to breathe life into your OWN car, just *because*? Are you a detailer looking to make money with a profitable and effective service?
This video is for you.
Products used can be found here:
All Clean: bit.ly/AllCleanAPC
Rinseless Wash: bit.ly/RinselessWash
Clay Towel: bit.ly/FineGradeClayTowel
Iron Remover: bit.ly/3GfY4iM
Twist loop towels (3 pack): bit.ly/TwistTowels
Ceramic Gloss: bit.ly/CeramicGloss
Tire Lotion: bit.ly/TireLotion
#detailing #gmc #paintcorrection

Пікірлер: 182

@diydetailofficial Жыл бұрын

Products used can be found here: All Clean: bit.ly/AllCleanAPC Rinseless Wash: bit.ly/RinselessWash Clay Towel: bit.ly/FineGradeClayTowel Iron Remover: bit.ly/3GfY4iM Twist loop towels (3 pack): bit.ly/TwistTowels Ceramic Gloss: bit.ly/CeramicGloss Tire Lotion: bit.ly/TireLotion

@larrysing Жыл бұрын

I don’t see the Spray Polish in the list. Did I miss it?

@diydetailofficial Жыл бұрын

It will be on our store by the end of this week.

@K2dab2damyahoocom 9 ай бұрын

Will any carwash sponge work?

@diydetailofficial 9 ай бұрын

@@K2dab2damyahoocom no

@marklittleton1309 Жыл бұрын

As a diy'er who dabbles in detailing a few cars on the side in addition to my own, I have to tell y'all, that was a cool video! Lots of little tips and trips along the way - like removing the polish with Ceramic Gloss. Never would have thought of that! Plus, the Gold Standard polish and pad look like great products for the kind of work I do (quick enhancements).. Can't wait to try them out! 👍

@diydetailofficial Жыл бұрын

Thank you!

@stephenbozzone1116 Ай бұрын

Before I watched this video, I was convinced I needed a $180 pad washer. Thanks guys for saving me some money.

@diydetailofficial Ай бұрын

Thank you.

@attention2detailswchelsea Жыл бұрын

Great video as always guys! I always appreciate your ability to teach as you work and aspire to be more like you with my channel. Products look amazing

@diydetailofficial Жыл бұрын

Thank you Chelsea!

@rubenharris9241 Жыл бұрын

Another mic drop in simplification of DIY detailing. Well done!

@diydetailofficial Жыл бұрын

Thank you

@davidruggles996 Жыл бұрын

Great work guys! You are fun to watch and always have little gems of wisdom sprinkled in. Thank you.

@diydetailofficial Жыл бұрын

Thanks for watching!

@jayz313 Жыл бұрын

Great video❗❗ You guys make excellent tutorials, and I must add amazing results on that old paint with a few simple processes that can be applied in many scenarios.

@diydetailofficial Жыл бұрын

Thank you

@robpeluso2852 Жыл бұрын

Another great video! Can’t wait to try the polish!

@diydetailofficial Жыл бұрын

Thank you, the wait is almost over.

@jlb3675 Жыл бұрын

I am amazed at how little product you used to polish the car. I also love how you can use the ceramic spray as you wipe off. Can't wait to try this.

@diydetailofficial Жыл бұрын

Thank you

@404notfound..... Жыл бұрын

Nice to see an older vehicle that needs complete detailing on the exterior, great job gentlemen!! 👍🇨🇦

@diydetailofficial Жыл бұрын

Thank you

@chriss3959 Жыл бұрын

Thanks for the tips and not overcomplicating things! Definitely want to do this in the spring

@diydetailofficial Жыл бұрын

Let us know how it goes!

@chriss3959 Жыл бұрын

Will do! Hopefully your polish and pads are available then

@diydetailofficial Жыл бұрын

@@chriss3959 they start shipping Monday January 9

@chriss3959 Жыл бұрын

@@diydetailofficial Nice

@DetailingMadeSimple Жыл бұрын

Loved this content fellas! I love Polishing enjoy doing it especially watching you guys. Beautiful transformation 💪 We need more videos like this please..... We Appreciate the knowledge and techniques both of you provide. I can't wait for the Polish and Pads. 🤛 Your Iron remover I tried it for the first time this past week. It's very lubricious and instant bleeding.

@diydetailofficial Жыл бұрын

Yessir! Polish and pads should be released either tomorrow or Friday!! Stay tuned…

@DetailingMadeSimple Жыл бұрын

@@diydetailofficial NIIICCCEEE!

@stevenv9224 Жыл бұрын

Great great video answer lots of my questions I had in my mind. Glad you guys make video like this you guys are the best. Am so blown away too with your products too love how easy and quick you can clean up the car. Hope to see the polish and pads soon. 😉

@diydetailofficial Жыл бұрын

Thank you, polish will be available to order tomorrow, shipping on Monday.

@DetailingMadeSimple Жыл бұрын

Ahhhhhh gotcha I found you in here 😭😭. That's great to know it'll be open to order tomorrow

@stevenv9224 Жыл бұрын

😉

@attention2detailswchelsea Жыл бұрын

Definitely excited to try Gold Standard and try out your technique. Paint enhancements are my Bread and butter and this has me excited to try.

@diydetailofficial Жыл бұрын

We are excited to get your thoughts on it.

@greghaefs4677 11 ай бұрын

Love the full video I am taking mental notes on efficiency and what my next purchases of DIY detail I will have. You should send magnets or stickers of DIY detail that I could put up in my garage, when someone buys your products! Love the diy detail decal you got on your wall

@diydetailofficial 11 ай бұрын

thanks so much! Yes we painted that on, we actually use a projector to project the logo onto the wall and that made painting it accurately quite simple

@maacodale Жыл бұрын

Good info, guys.

@diydetailofficial Жыл бұрын

Thank you Dale

@PolishedMobileDetailing503 Жыл бұрын

I have been prejudiced against any other “normal” style of polish after being trained originally using the hyper correction system. I am looking forward to trying your polish out once it’s available! Btw I am the one who received the frozen products in OR and I just wanted to say I appreciate the professionalism and courtesy your company has shown ! I definitely will continue to implement your products in my business.

@diydetailofficial Жыл бұрын

Thank you , we are sure you will enjoy The Gold Standard Polishing System

@ronbeeman4557 4 ай бұрын

Just order my polish and pads can't wait to use it!

@diydetailofficial 4 ай бұрын

Thank you.

@dustin3700 Жыл бұрын

I love how when I polished my winter beater 2000 jimmy with over 230k on the clock it looked amazing using an all in one and detailing the inside, after 3 years I sold it for more than I paid for it.

@diydetailofficial Жыл бұрын

That’s great!

@WesleySutton Жыл бұрын

Can’t wait until these products are available

@diydetailofficial Жыл бұрын

The wait is almost over

@markmoore6264 7 ай бұрын

Great video and your a very good double act 👍

@diydetailofficial 7 ай бұрын

Thank you

@thesamsquatch5224 Жыл бұрын

I'll gladly take second, I always like to see Nick and Yvan polish! Two different styles with great results and really helps put us at ease. Its scary thinking about burning through clear coat If I may ask looks like all clean was not foamed on the paint is there a reason versus foaming?

@diydetailofficial Жыл бұрын

We didn’t foam, just to show different options.

@neilwalker5041 Жыл бұрын

I feel like I owe Yvan money for the efficiency lessons as I would have polished the glass separately from the paint. Thank you guys for an amazing video and for educating the rest of us.

@diydetailofficial Жыл бұрын

Thank you

@havingtoomuchfun4806 Жыл бұрын

Most Detailers owe him, so many of his techniques and products he’s pioneered and developed are used and common practice now. He’s contributed so much to this industry without asking for anything in return. No IDA awards etc.

@diydetailofficial Жыл бұрын

Thank you, Yvan really enjoys learning and sharing.

@RMVDETAILING 8 ай бұрын

Exactly!😊

@diydetailofficial 8 ай бұрын

Thank you

@Ecdetails Жыл бұрын

You guys are amazing, I like the raw honesty. It's so true the higher it gets the less we focus. I wanted to ask tho if I have a pressured keg can I remove the iron with that and rinseless and go straight to drying? Also on the polishing which is sick - is the polish pad dependent meaning can I use a more aggressive pad and get more of a cut? ALSO ---- that gloss is nutty

@diydetailofficial Жыл бұрын

Yes, you can use a Keg to rinse then dry. Definitely pad adjustable cut, we have a unique cutting pad on the way soon. Thanks!

@Ecdetails Жыл бұрын

@@diydetailofficial thanks a bunch fellas awesome work.

@diydetailofficial Жыл бұрын

Thank you

@havingtoomuchfun4806 Жыл бұрын

Guys, again a masterclass of detailing efficiency and quality. People who don’t watch your videos to the end are loosing so much. Ivan is a detailing encyclopedia, and I’m sure he doesn’t even realize how much information he’s giving us.

@diydetailofficial Жыл бұрын

He doesn’t, to him it’s all just common knowledge.

@mingoreyes1 Жыл бұрын

Looks good. I just ordered some gold standards for my gring back that shine. Did yall do the roof?

@diydetailofficial Жыл бұрын

No, the clear was pealing.

@MeliorIlle Жыл бұрын

Owner of that Yukon took amazing care of his vehicle.

@diydetailofficial Жыл бұрын

Right?

@MikeGDetailing Жыл бұрын

Nicely done. It came out looking great. The owner took good care of it. Hard to believe it has 300k miles on it.

@diydetailofficial Жыл бұрын

Yes, other than a little rust on the rear arches it’s in good shape

@aarontyrrell2931 Жыл бұрын

I don’t think I have ever seen anyone sit on the floor to buff a vehicle. I made a phone call today to see if my paint supplier to our BMW Chevy collision center can get the Gold standard to try out. Love Yvan from his time at Optimum.

@diydetailofficial Жыл бұрын

Thank you , have them reach out to us, or you can buy directly.

@skylar1112 Жыл бұрын

I live in a building, with no access to running water, and don't feel like spending time in the parking garage. But damn this is an excellent solution for me

@diydetailofficial Жыл бұрын

Thank you

@aldaley3537 Жыл бұрын

Nice work. Should we be expecting DIY polish this spring? That peeling paint was a GM paint defect. Had to repaint the top of my 2002 Escalade.

@diydetailofficial Жыл бұрын

This week

@mcflotty 13 күн бұрын

It's funny, I always do wheels and tires (wells) first, then once I get to contact wash, decon, etc., whatever order follows be it polsih or compound etc. I do the roof. Because it's a pain in the rump and I want to get it out of the way lol. I just don't love being on the ladder with damp or wet shoes, reaching, so I do it when I'm as fresh as possible every time:).

@diydetailofficial 13 күн бұрын

Great tip!

@ac7384 6 ай бұрын

What towels you recommend for removing polish and the ceramic gloss

@diydetailofficial 6 ай бұрын

Pearl weave towels.

@HAL-dm1eh Ай бұрын

I live on a dirt road with lots of iron (not quite full blown red clay), should I use the clay towel with the iron remover on every rinseless maintenance wash instead of just the sponge?

@diydetailofficial Ай бұрын

No need

@larsenttif Жыл бұрын

If we don’t take durability and application into concideration, what would be the main difference between a product like Ceramic Gloss or Quick Beads compared to DIY ceramic coating?

@diydetailofficial Жыл бұрын

The only advantages of DIY Detail Ceramic Coating is durability and chemical resistance. DIY Detail Quick Beads and Ceramic Gloss will provide some chemical resistance, but not as much as the thicker DIY Detail Ceramic Coating. Beading will be equivalent on all 3. In an ideal situation, start with a base of DIY Detail Ceramic Coating, and add to that DIY Detail Ceramic Gloss or Quick Beads when you wash as maintenance.

@LoveLikeaHurricane Жыл бұрын

do you have to clean out the multi pro from the all clean every time ? or are the Multi pro sprayers/foamers sturdy and won't break down with All Clean?

@diydetailofficial Жыл бұрын

Ideally

@chriswoodward5368 Жыл бұрын

Has any one tried the gold standard on polished stainless steel. If so would you use a wool pad The stainless is shiny now would like to take some light scratches out and restore the shine a bit.

@diydetailofficial Жыл бұрын

It will not do much on stainless steel

@bluegrasskid4835 Жыл бұрын

Where do you two buy the clear buckets?

@diydetailofficial Жыл бұрын

A restaurant Supply.

@Matt_224 Жыл бұрын

Have you done a video on what a maintenance wash would look like on a vehicle that was just detail like this one?

@diydetailofficial Жыл бұрын

We will be soon

@Matt_224 Жыл бұрын

@@diydetailofficial outstanding. Now I just gotta get some product ordered.

@diydetailofficial Жыл бұрын

Please let us know how you like them.

@simplysimplemobiledetailin529 Жыл бұрын

In this instance, would a medium clay towel have done better? Always wanted to ask about the medium vs fine

@diydetailofficial Жыл бұрын

The more aggressive your clay towel(or bar) the higher the risk of marring the paint (which usually requires polishing after). Sometimes you need more aggressive clay for certain jobs but you’ll likely need to polish to remove the marring, whereas our towel works great for most jobs and if you use it the way we teach (no pressure) it’s great for coated cars or regular details no problem

@joelpasserell4525 Жыл бұрын

How does it work with using ceramic gloss to spray and wipe off the polishing residue? With Polish still on the paint, I would think the Ceramic gloss doesnt have a chance to bond good if you're mixing it with polish and don't first remove the polish? Would Ceramic gloss last longer if I don't care about the time and I first remove the polish, then panel wipe, then Ceramic gloss wipe?

@diydetailofficial Жыл бұрын

It actually doesn’t have much of an impact. Yes for best longevity wipe off before

@franksattler6053 Жыл бұрын

Is the spray polish you used from DIY or is it from another company? Also, can this be used to prepare a vehicle for a coating?

@diydetailofficial Жыл бұрын

It’s our own formula, like everything else we sell, no private labels here. Yes it can be used prior to a coating

@taylorshiver3284 Жыл бұрын

What bucket are you using?

@diydetailofficial Жыл бұрын

We got these from Detailed Image if memory serves

@garrett6743 Жыл бұрын

Can you use any iron remover for a clay lube?

@diydetailofficial Жыл бұрын

Ours will provide lubrication, not all will. Feel free to try yours and see what you think, you know where to find us:)

@stephen1503 Жыл бұрын

So you’re cleaning the pad in the same rinseless bucket you washed in? Assuming That is fine as long as you keep the iron remover and gunk out

@diydetailofficial Жыл бұрын

Correct.

@unclegrandpa205 9 ай бұрын

So after this step then May I put a ceremjc coat on it ?

@diydetailofficial 9 ай бұрын

yes, just no Ceramic Gloss at the end. Instead, Panel Prep wipe down and then Ceramic Coat

@jhiggi7282 Жыл бұрын

Yvan. Where can I purchase the waffle foam pads.

@diydetailofficial Жыл бұрын

Check our website, they should be available tomorrow on www.DIYdetail.com

@NoKingsNoGodsOnlyMan Ай бұрын

Where does one get that bucket?

@diydetailofficial Ай бұрын

Local restaurant supply

@brandonbaker2281 14 күн бұрын

What brand and type of polisher are you using?

@diydetailofficial 14 күн бұрын

Milwaukee M18

@NoKingsNoGodsOnlyMan Ай бұрын

Can you correct a whole vehicle with one pad as long as you keep it clean throughout the process? And then polish with one pad?

@diydetailofficial Ай бұрын

Yes

@MrChuckwagon55 Жыл бұрын

Is the DIY rinseless wash geared more for people at home or is it something that can be used professionally at shops the way ONR has been/is? I don’t care about foam, I want the best possible result.

@diydetailofficial Жыл бұрын

As a professional there is no reason not to switch, it’s everything ONR was and more.

@MrChuckwagon55 Жыл бұрын

@@diydetailofficial - Thank you. I’m going to order a few gallons (with the ceramic spray) and test it out.

@diydetailofficial Жыл бұрын

Thank you, please let us know how you enjoy it.

@ShelterDogs 11 ай бұрын

Which Milwaukee polisher is that? And why this one? I'd like a cordless one. Is that the M18 7 inch?

@diydetailofficial 11 ай бұрын

I believe we are using the cordless Milwaukee dual action polishers in this video. 15 and 21 mm. We got them because they matched our colors:) we like them just fine

@ShelterDogs 11 ай бұрын

Thank you! Those looks awesome. But it isn't rotary which is what Yvan likes and suggests. I looked it up and the Rotary version is a bit dated, and these use newer and updated technology.

@JackRR15 Жыл бұрын

So can we do a car with just one pad? I'm going to have to buy your cutting pads as well to for my BMW's paint IMO based on its condition and the 6 inches so it gets expensive quick. People online were saying you need average about 4 for cutting step + another 4 for polishing ha.

@diydetailofficial Жыл бұрын

You only need one pad for an entire car if you use the pad washer (one wool one waffle if you plan to cut *and* polish)

@JackRR15 Жыл бұрын

@@diydetailofficial Okok perfect thanks for the help. By pad washer you mean like with the rinse less there not a bucket pad washer system?

@davidsteckley8846 8 ай бұрын

I personally never dry a vehicle by hand. Always use a leaf blower. Benefit also gets water out of the small areas such behind license plates,mirrors etc. the cost of pad washer I can buy way more pads, wash them by hand at the end of the day. I don’t like a pad spinning around on plastic ridges. What are your thoughts on Americana pads? LC seems to be the favorite. They’re well made. I’ve not tried your polishes yet. Been a big fan of 3D One

@diydetailofficial 8 ай бұрын

Haven’t tried those pads.

@MrChuckwagon55 11 ай бұрын

What if I have 20 year old, never cleaned blackened caked on gunk on my wheels? Use an acid cleaner?

@diydetailofficial 11 ай бұрын

That would be the last resort. DIY Detail All Clean and DIY Detail Iron Remover will be able to clean most if not all of it.

@ceerock8088 Жыл бұрын

👍👍👍👍

@diydetailofficial Жыл бұрын

🙏🏻🙏🏻🙏🏻

@starzztop Ай бұрын

Is it safe to polish a 14 year old vehicle that has never been polished before? It has no peeling paint but it does look shiny but kind of hazy. Thank you

@diydetailofficial Ай бұрын

Yes

@arturia5976 Жыл бұрын

A spray polish! That’s nice! Question - will this polish stain rubber or plastic / vinyl parts? As I noticed that you guys didn’t mask off the car. I had the unfortunate part of staining the rubber parts of the windows as well as a bit of the factory blackout tape (really hate those) on my Seltos and it was brand new car then as well.

@diydetailofficial Жыл бұрын

No it doesn’t stain.

@arturia5976 Жыл бұрын

So safe to say that when this is released, we won’t need to mask off the car plastic and rubber trims? That will really be a real nice time saver if that’s true.

@diydetailofficial Жыл бұрын

Correct.

@MeliorIlle Жыл бұрын

Why would you spray ceramic gloss if you're polishing?

@diydetailofficial Жыл бұрын

It’s an efficient way to remove polish residue and protect in one step. Saves you time

@ronbeeman4557 3 ай бұрын

How many pads do I need for a vehicle?

@diydetailofficial 3 ай бұрын

Just 1, use a pad washer between polishing sections

@alexbryan7641 Жыл бұрын

When will gold stsndard polish be out?😁

@diydetailofficial Жыл бұрын

By the end of this week.

@alexbryan7641 Жыл бұрын

@@diydetailofficial awesome! Thanks!

@YasserAlaska Жыл бұрын

A detailer somewhere is saying: How dare you make it look easy 😂😂

@diydetailofficial Жыл бұрын

Lol that’s the way it should be! It’s obviously work but it doesn’t have to be so hard :)

@bluegrasskid4835 Жыл бұрын

14:40 With peeling paint on the roof, while you the detailer do not want to polish it, eventually the owner will want to have it resprayed or else it will rust I assume?

@diydetailofficial Жыл бұрын

Correct

@bluegrasskid4835 Жыл бұрын

@@diydetailofficial Not a fun message to relay to your customer with the price of OEM paintwork.

@Agregoire61 10 ай бұрын

Did tou forgot Iron Remover on wheels?

@diydetailofficial 10 ай бұрын

Unfortunately they were beyond that.

@dustin3700 Жыл бұрын

Detailing in doors is so nice and is like cheating especially when climate controlled, doing this outdoors in the sun can definitely be a challenge when using chemicals like iron remover and APCs.

@diydetailofficial Жыл бұрын

Definitely a challenge

@RAZERSDRIVER Жыл бұрын

I'm not sure if I understand it but you pre-rinse car, rinse it off and then start to clay? Without washing car?

@diydetailofficial Жыл бұрын

At the 3:10 mark Yvan cleans the surface with DIY Detail Rinseless Wash. Then Nick adds Iron Remover, to add more lubrication for claying.

@RAZERSDRIVER Жыл бұрын

@@diydetailofficial I have missed that! Thank you

@diydetailofficial Жыл бұрын

Thank you for your question.

@Johnpf1969 Жыл бұрын

I can dial-in glass on my customers car but I cannot dial in glass on my own car isn't that funny

@diydetailofficial Жыл бұрын

You may be trying too many different products.

@madwax1360 Жыл бұрын

This is money

@diydetailofficial Жыл бұрын

Thank you

@1stfrompuertorico568 Жыл бұрын

That spray polish is amazing and must be shown more. No one has this product, at least I haven't seen it from anyone anywhere.👍👍👍👌👌👌 Nice red shoes!👌👌👌👍👍👍

@diydetailofficial Жыл бұрын

It should be released either tomorrow or Friday!!

@Carlos.Rivera Жыл бұрын

Optimum got that back in the day🤔

@havingtoomuchfun4806 Жыл бұрын

@@Carlos.Rivera yep, and Ivan developed that one too.

@Ecdetails Жыл бұрын

@@havingtoomuchfun4806 Truth

@1stfrompuertorico568 Жыл бұрын

@@havingtoomuchfun4806 yep, that's what I am referring to because Yvan innovated that.

@tgunter1000 Жыл бұрын

Show us 1 hour on that truck from start to finish, no talking, one person.

@diydetailofficial Жыл бұрын

Sounds like a good video, but it’s very difficult to get Nick or Yvan not to talk.

@jre617 6 ай бұрын

This is helpful, but you guys always say "in just one step." But it's really about 4 or 5 steps. And this would take longer than an hour. And I don't have any of those tools. So it's a bit more of a production to get started. But thanks.

@diydetailofficial 6 ай бұрын

Thanks for contributing.

@johndoe6032 10 ай бұрын

Come on guys, an hour? Sure if you have two guys and only work 1/3 of the vehicle. Did you think nobody would notice you skipped the passenger side and the back in addition to the roof? Hype the efficiency all you want, but telling a DIYer they can wash, prep, and polish their paint in an hour is a flat out lie. All you’re doing is setting expectations way too high and will make a person rush the job, make mistakes, and have terrible results. Not great for your brand.

@diydetailofficial 10 ай бұрын

It’s far from a lie, yes parts were edited out because many people don’t like to watch a 1 hour long video. Here’s a video shot in real time. kzfaq.info/get/bejne/hJh2qKeStKnaYKc.html

@johndoe6032 10 ай бұрын

@@diydetailofficial did you think I wouldn’t check the video?? 1. It’s an hour and 36 minutes, not an hour as claimed. 2. There are two people working on it, not just Ivan. 3. It’s a tiny Miata. Nothing like the giant suburban in your video where you claim one person can do it, and imply even a suburban, in an hour. Show me a video where someone does all of the steps you show in this video alone in an hour, and actually do a good thorough job.