WOOD BURNING! BURN PICTURES & DESIGNS INTO WOOD W/ ANY CRICUT MACHINE

WOOD BURNING! BURN PICTURES & DESIGNS INTO WOOD W/ ANY CRICUT MACHINE | CRICUT TUTORIAL FOR BEGINNER

Рет қаралды 322,165

2 жыл бұрын

Here's the Easiest way to burn designs onto wood without a wood burning kit! If your cricut machine can cut it you can burn it!
In this Easy Cricut Tutorial for Beginners, I’m showing you how to burn designs into wood with your Cricut machine! This wood burning technique is done without a branding iron or wood burning kit. The secret ingredient is Ammonium Chloride that can be used to chemically burn / brand photos, designs! This easy, step-by-step Cricut tutorial can be done with any cricut machine. The Cricut Joy, Cricut Explore Air 2, or Cricut Maker!
cricut explore 3 - amzn.to/3kssrWG
good quality heat gun - amzn.to/3sUrbQ2
mini heat gun ( similar to mine ) - amzn.to/3sOACQO
food thickener - amzn.to/3mG9aUd
ammonium Chloride - amzn.to/3Bo3O43
Mr crafty paints video - • 🔥 *UPDATED* BURN PICT...
#cricut maker This video is sponsored by cricut
get cricut premium access -
shareasale.com/r.cfm?b=167247...
shop cricut products -
shareasale.com/r.cfm?b=133463...
LilyArdor is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. Please view our full disclosure for additional information.
scorch marker alternative!

Пікірлер: 108

@SilentKnight43 Жыл бұрын

I saw this exact technique at a local thrift shop earlier today - the woman mentioned she'd done it using her cricut printer but I never realized at the time the amount of steps and actual work involved in actually doing it. After watching your video I have much more appreciation for the results she got. It's a very interesting technique - never would've guessed it was a chemical process.

@diylilyardor3435 2 жыл бұрын

😊Hi Guys! So excited to share this video with you! I hope you're all doing good. I've always wanted to try burning designs on wood 😍and finally got to try it! I think this would much such cute christmas gifts!!

@PamperedWife 2 жыл бұрын

I love this honest, realistic review which includes instructions!

@diylilyardor3435 2 жыл бұрын

Thank you :)

@arleneaugustahair8393 2 жыл бұрын

Nice! I saw his video also! I’m glad you were honest about your mistakes. I wouldn’t have really noticed.

@undercoloroflaw Жыл бұрын

You have a Miranda Lambert kinda smile....great job on the wood burning. I just got my cricut maker 3. Am anxious to wood work.

@whiterose7909 2 ай бұрын

I admire your enthusiasm. Your product looks great don't worry about anything else

@0671018 2 жыл бұрын

Suggestion, clean surface with rubbing alcohol prior to applying the stencil or vinyl. There will be dust and other particulates on the surface and cause the material to not adhere.

@joeguilfoyle1922 2 жыл бұрын

Thanks for this video. I was wondering, is it possible to do a light sanding and put stain over the completed burned project? Or should you just stain first? Thanks again.

@aprilpulliam9306 2 жыл бұрын

Made a round piece for my daughters wedding. Turned out perfect. Thanks for the video

@mrcraftypants 2 жыл бұрын

LOVE IT! Thanks for the shoutout! 😊❤️

@diylilyardor3435 2 жыл бұрын

So happy to hear this! LOVE all your work!!

@ChandraPivo Жыл бұрын

Great review! In the middle of trying it now!

@victoriabatterton6268 Жыл бұрын

I've seen where adding a couple drops of food coloring to the gel really helps u know where u have and haven't put the gel...any color besides yellow

@mikkimouse1762 Жыл бұрын

Wow! This is amazing! I have to try this. Thank you for sharing! ...AND Your eye color is GORGEOUS! Liked ✔ Commented ✔ Subscribed ✔

@terrimiller1523 Жыл бұрын

I've tried 1tablespoon of corn starch to a little less than 1/2 cup of water I heated it for 120 second. A minute and as half. Stop your microwave and stir a few times add your ammonium chloride 1 tablespoon. Wala no thicket needed. Enjoy happy burning

@sbs128 Жыл бұрын

Aha! Thank you. Just what I needed to know.

@chitowntexan Жыл бұрын

Turned out great 👍🏽

@aminazanda8185 Жыл бұрын

Hello super nice and usefull! I was wondering if i can preserve the mixture for later (days). Thank you for your answer

@Sikarate 9 ай бұрын

I love your video, so I would like to know what's the font name of your design (Hive and the best)

@ramonalucio3176 2 жыл бұрын

Good morning! I love this project, just one suggestion. Switch to another brand about your transfer paper, cricut brand is super strong. 😘🌹🌷🌺

@michelearrington8664 8 ай бұрын

can you reuse the vinyl to make multiple

@chipz861 2 жыл бұрын

Awesome! Thanks

@corrinalopez3556 Жыл бұрын

Thank you !!!

@sbs128 Жыл бұрын

Hi. Great video. I have a project in mind but I’m in the uk and that brand of thickener is not available here. There are several on the market but not sure which to use as they have different ingredients. Do you know what it is in your Thicken It that makes it work plz?

@user-ez1lf2ic7z 2 жыл бұрын

Hi great video keep going but can I ask you what's the name of your foundation

@debbiegultch2414 Жыл бұрын

Great video!! Loved the tip about taping it down to hard surface!

@janitaf1351 Жыл бұрын

Was wondering if you can use still use a stain after everything completed?

@karkule5919 Жыл бұрын

So if you left this outside it would be resistance to rain, heat, snow, etc., and would this work on acrylic windows...?

@ACKSWOODPASTE 2 жыл бұрын

Regardless, You should seal the wood with a food safe wood polish to protect the wood.

@Blahblahblah769 2 жыл бұрын

Great video subscribed !

@benr284 2 жыл бұрын

Hi, loving your work! Do you know how long the mixed up paste will keep for? Thanks

@diylilyardor3435 2 жыл бұрын

Hi Ruby, Thank you so much. I'm not sure sorry.

@Blahblahblah769 2 жыл бұрын

Excellent video. Subscribed !

@diylilyardor3435 2 жыл бұрын

Awesome, thank you!

@benrogers9397 6 ай бұрын

How long did it take the mixture that you applied to dry?

@donnalongo1848 2 ай бұрын

If you add food coloring to the mix you can see it better on your wood when you go to heat it up.

@danniemikeey579 2 жыл бұрын

Does it work on bamboo boards?

@wolfriepl3978 2 жыл бұрын

thanks for this great video🤗 we try it out BUT in our case the ammonium water mix actually "flow" or run under the letters on the vinyl, so we didnt hav clear letters. did you had soch problems too? or any advises? thanks a lot✌💚

@sweetsurely183 2 жыл бұрын

Hello!! Is this food safe? Thank you

@tracey-annawong8497 Жыл бұрын

Can i get a.c at a hardware? Im in the Caribbean and im not sure where i can source it

@ssergeant9682 2 жыл бұрын

I read somewhere that you can use cornstarch to thicken. wondering if any thickener would work? tapioca etc? it seems as if the main objective is to make a paste...??

@lilditty2172 Жыл бұрын

Did you try this with other thickeners?

@lucyreed9696 Жыл бұрын

Can I ask where you got svg file from, please?

@lisaculbreth5368 2 жыл бұрын

Will it be safe to cut into and eat off of

@nolanlane9328 Жыл бұрын

can you do a burn like that on leather?

@staciefolk678 Жыл бұрын

Thank you for this video. Question, if you use permanent vinyl, wouldn't it be hard to remove the stencil from the wood?

@imadish5356 Жыл бұрын

Hiya Stacie. If you haven't already tried it, we have used permanent vinyl and it comes off fine. Just don't let it stay on too long as it bonds more over time. Good luck!

@vanessafulmer8851 2 жыл бұрын

Great video Lily!! I did some cutting boards as well, but I like the board you used. Where did you get it (if you don't mind me asking)?

@sameenatanwir1400 2 жыл бұрын

She said hobby lobby

@diylilyardor3435 2 жыл бұрын

Hi Vanessa, thank you. How exciting! I got mine at hobby lobby.

@ShortyInskeep15 2 жыл бұрын

How long did it take to get the ammonium to burn? I’m trying this out and I don’t think I’m leaving the heat gun on it long enough

@diylilyardor3435 2 жыл бұрын

It really depends on how close you hold it too. I held mine about 1/4 of an in away and consistently kept moving so I don't burn one spot but, I would say it definitely takes a bit of time. All together it took me about 40 minutes to burn the whole cutting burn out. MY heat gun was pretty weak though.

@daniellegrove2098 Жыл бұрын

Does this put off smoke?

@elanahamby6211 Жыл бұрын

Would recommend maybe 7 tbsp of thick-it. It becomes too thick and takes absolutely forever to dry. When it does, the thick spots just don't burn right

@user-ed3jf5vc3c 2 ай бұрын

what was the software u use

@tambam78611 2 жыл бұрын

I tried using vinyl stencil and a scorch pen on wood coasters. Total fail bc of bleed. Are there woods that are better and won't bleed or are the pens just bad and should use the thickener route?

@diylilyardor3435 2 жыл бұрын

Sometimes the problem could be that the vinyl isn't adhering good enough. I also think if the consistency of the liquid it to runny that'll do it too. So yes definitely try using the method with the thickener.

@tambam78611 2 жыл бұрын

@@diylilyardor3435 are there certain wood types that just bleed?

@Nosculptor 2 жыл бұрын

@@tambam78611 I think (just planning to try this technique) ring-porous woods will bleed more, since they have large vessels, and rough fibre structure. These are oak, acacia, ash, and elm wood. You want to use woods with more homogeneous structure, like beech, poplar, maple, linden etc.

@sophiaperdue9451 2 жыл бұрын

Hey has anyone tried a heat press to expose the design?

@charangelpoo1 2 жыл бұрын

Mine didn't work...it is very very light. I even went back and applied a second coat after it didn't get a darker, and its still so very light. I wonder what went wrong.

@eldareyes1140 2 жыл бұрын

What is the mixture for the ammonium chloride and thick it? How much do I use?

@diylilyardor3435 2 жыл бұрын

I share the recipe on my blog - www.lilyardor.com/how-to-burn-pictures-in-wood/

@mimimadeit237 2 жыл бұрын

So if I am correct you first applied ammonium only then burned and for the second time you put the ammonium and thickener mixture?

@diylilyardor3435 2 жыл бұрын

no. I made a mixture of ammonion and thickener in warm water then applied that mixture only once. Let dry and burned it off.

@mimimadeit237 2 жыл бұрын

@@diylilyardor3435 thanks for responding

@diylilyardor3435 2 жыл бұрын

@@mimimadeit237 No problem anytime :D

@kit6863 2 жыл бұрын

Most boards I’ve found here in Australia have already been lightly oiled! It’s so frustrating!

@chucky6367 Жыл бұрын

Sand them

@waymakersfun-time3930 2 жыл бұрын

Sand wood some before applying stencil.

@LynneLove Жыл бұрын

Food safe mineral oil to seal it for use with food

@sandracarrillo5150 3 ай бұрын

So you used the ammonium chloride twice on the big piece of wood?

@diylilyardor3435 3 ай бұрын

Just to make the paste and apply from what I remember

@PondokKlene77 2 жыл бұрын

wow keren dan cantik karya-karyanya

@diylilyardor3435 2 жыл бұрын

Thank you

@AtinaEstrella Жыл бұрын

Can we save rest of the mix for later projects?

@diylilyardor3435 Жыл бұрын

I think it lasts up to two weeks in the refrigerator but I'm not 100% positive. Would definitely need to try.

@laurawhittaker7217 2 жыл бұрын

I’m confused about the process. The sequencing was that you applied ammonium chloride, peeled stencil then burned the wood. You then went and mixed the ammonium chloride and thickener then applied that mixture.

@chucky6367 Жыл бұрын

I was pretty confused too lol So many steps, chemicals ( also lots of plastic waste ) l'll stick to authentic wood burning 🔥

@mweyhe167ify 2 жыл бұрын

I can't use the cricut transfer tape...... clear contact paper works so much better!

@diylilyardor3435 2 жыл бұрын

I'll have to try that thanks :)

@rfyke70 2 жыл бұрын

I'm having horrible trouble, I'm using permanent vinyl and it does not want to stick, only the transfer paper is sticking. I'm using Cricut transfer tape??????

@kimipartyof5 2 жыл бұрын

How much do you use of each of the chemical things and water to put on the project

@nicholem4831 Жыл бұрын

Wtf? What kind of question is this? Did you even bother to watch the video? Because she covers that in the vid 🙄.

@BoojiePanda 2 жыл бұрын

Make sure you are using a respirator mask when using ammonium chloride, the fumes are not safe for your lungs.

@peterk7428 10 ай бұрын

Small thing, but you should burn wood and THEN stain it to avoid chemical fumes.

@cindybeck278 2 жыл бұрын

Most cutting boards I have tried are bamboo and I guess because they're sealed and/or so hard, they do not soak up the solution 🤐

@diylilyardor3435 2 жыл бұрын

Oh no!

@VeronicaJones58 Жыл бұрын

👍👍👍👍👍👍👍

@tamibagstad2381 Жыл бұрын

I am not sure who typed the closed caption, but you might want to check it out…please feel free to delete this comment after reading! :) Loved this video :)

@dcruicks1 2 жыл бұрын

You need to sand it first.

@annbesterci1041 2 жыл бұрын

Never stain the wood before doing this process.

@miaweasley94 2 жыл бұрын

Following this!

@aliciasmith264 Жыл бұрын

Thank you for saying this. I was just about to mention this!

@nakisbandi7055 2 жыл бұрын

Very good but not simple ( from Indonesia country ).

@diylilyardor3435 2 жыл бұрын

Thank you appreciate the feedback

@lei00418 2 жыл бұрын

Guy also be mindful that although food is ok on top of this. It's not safe to cut on top off. Do not use as a cutting board as the stain itself is not food safe.

@QQ21vr Жыл бұрын

She didn’t use stain on it. So it’s ok to use as a cutting board then right? Or no?

@aliciasmith264 Жыл бұрын

It can be made food safe

@donnalongo1848 2 ай бұрын

I know it's sponsored by Cricut but that's why there were so many issues, their transfer tape is way too sticky for stencil vinyl. I think it's too sticky for all vinyls, but their strong grip for their glitter is great. If you do this project, definitely don't use their transfer tape, use a real transfer tape, Amazon had great deals.