Remove The Chuck and Open The Chuck Bosch with Blocked Jaws

Рет қаралды 187,966

3 жыл бұрын

Here you can see the products which i used in this video
AliExpress s.click.aliexpress.com/e/_9z48kt
Here is a video about disassembling a Chuck Bosch with blocked jaws.
Battery Spot Welder • DIY Battery Spot Welde...
Thanks for watching . And do not forget, Like and Subscribe
Due to factors beyond the control of BOSSY DIY, it can not guarantee against unauthorized modifications of this information or improper use of this information. BOSSY DIY assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. BOSSY DIY recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of BOSSY DIY, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not BOSSY DIY.
If you want to use this song Jarico - Landscape [NCS BEST OF] in your project you must copy & paste this into your description:
► Jarico - Landscape : / la. .
► Jarico - Landscape [NCS BEST OF]: • Video

Пікірлер: 90

@Rondogardener 2 жыл бұрын

Man, you are a lifesaver. Thanks. I also like that you did not give us a detailed description of your family's problems. You got right to the point very quickly. 👍👍👍👍👍👍

@hgr4255 Жыл бұрын

But I want to know about his sick cat and canaries. Awww. LOL

@stevegek Жыл бұрын

But....... how is his family doing? WE NEED TO KNOW!

@popepaul4438 3 жыл бұрын

Always wondered how those Chucks work thanks

@CMCdiy 3 жыл бұрын

Glad to help

@antonionuno2711 3 ай бұрын

Thank you very much for sharing this information.

@freenautilus1 2 жыл бұрын

Appreciate, thanks 🙏

@cadermohideensyedabbas5463 Жыл бұрын

Congrats for for your Excellent invention. how the jaws are strucked your find out effort is nice

@dixonqwerty 4 ай бұрын

I just had to watch this because I didn't know how to get the chuck off after I unscrewed the 25 torx! Thanks!

@orlatris96 7 ай бұрын

Fantástico este trabalho. Obrigado por mostrar como é um mandril no interior, o que avariou. Amei este vídeo. Parabéns e muito obrigado

@sebastian85429 3 жыл бұрын

On some chucks, if the jaws are retracted all the way back and wont come out again, the following trick can help: Stick the largest shank/drill which still fits into the chuck all the way to the back.. Then tighten it. This can recover the jaws. Though this can only work if nothing has been broken before.

@insanhina9078 Ай бұрын

thanks for the knowledge.👍🏻

@CMCdiy 14 күн бұрын

So nice of you

@ioanaciuca8131 3 жыл бұрын

Wow!

@pollydor07 6 ай бұрын

Thanks

@supeskrim Жыл бұрын

Thanks and I just find out that you can simply use el cheapo generic 13/10 mm NORMAL key chuck as long as it has 1/2" 20 UNF thread shank. Most 10mm dril chuck use 3/8" 24UNF which is smaller, and most 13mm will be more likely to have 1/2" 20 UNF. The keyed normal chuck will actually act like "Bosch one hand" keyless chuck. I reckon using generic keyless chuck will need 2 hand operation as it's not aware of Bosch idle locked shank.

@nathanhedgeley8016 8 ай бұрын

Have you tried this? I want to fit a 13mm chuck to my bosch 10.8v. If I understanding your comment correctly this will work fine?

@supeskrim 8 ай бұрын

@@nathanhedgeley8016 It should, but to double check read the markings somewhere of the original chuck. Look for the UNF numbers, 1/2 or 3/8. Use magnifying glass if necessary. I did try but using the newer GSR12. But I guess Bosch never use 3/8 since I also have corded 10mm keyed chuck drill which also use 1/2 UNF. Except perhaps their mini 6mm drill (never had one). Even the original 10mm keyed chuck is using same key size normally for 13mm chuck.

@tungym Жыл бұрын

thanks.

@CMCdiy Жыл бұрын

Welcome!

@superrf85 8 күн бұрын

Very informative and helpful however watching you use that screwdriver and Dremel tool with unprotected hands made me nervous. Don't know how you managed to get it disassembled without injuring yourself.

@MrRandomino 3 жыл бұрын

Just wondering, does the replacement you used work on a BOSCH PSR 1800 LI2?

@CMCdiy 3 жыл бұрын

hi I don't know, You can try if you want, it worth it. because the size is about the same

@CallistoMarie Жыл бұрын

Pardon, oū avez-vous acheté le mandrin s’il vous plaît ? Merci 👍

@MarceloBitter 5 ай бұрын

Thank you so much. The tips about the use of torx 25 and turn clickwise were perfect

@ededdynova Жыл бұрын

All good but mine are jammed about 3/4 closed cant get a screw driver in here. Bosch is shite its the 3rd one ive had in 4 years. My black a decker ones never went wrong till i dropped and broke them

@CMCdiy Жыл бұрын

Hi Anyway the chuck is damaged, try to cut half of the chuck so you can access the screw and then with an Adjustable Pipe Wrench fix it and force it with the hammer

@CallistoMarie Жыл бұрын

C’est génial, c’est exactement ce qui arrive sur ma visseuse , sauf que j’ai un embout bloqué dedans , et je ne sais pas comment faire autrement que tout démonter. Ça aurait été plus simple pour moi .Merci pour votre vidéo, une Mamy bricoleuse très attentive à votre magistrale démo.👍🫶

@CMCdiy Жыл бұрын

Thanks for the appreciation, to remove the bit you can try with pliers, tighten the bit with the pliers and make a lever with the chuck, little by little. 🤗

@aicendio 7 ай бұрын

Any idea if most (or all) Bosch use torx t25? I’ve been trying but using a 1/8” Allen with no luck

@d4b4y4re4kid Ай бұрын

The allen is to round it wont bite. Youll have better luck with a small flat head that fits in the torx screw. But a t25 isnt that hard to get a hold of.

@robcurrie1261 2 ай бұрын

What size allen key did you use. 10 is too won't fit and 8 is too small.

@philjohnston783 Ай бұрын

Logic says 9. You sound like Goldilocks 😃😋

@papalilburn Жыл бұрын

I like a guy that's willing to take something (totally destroy) apart just to see what makes it tick!

@anordenpeach Жыл бұрын

do you have to get torx t25 bit? is there an equivalent hex bit that will work? Yes I've googled it but I'd rather get advice from the people commenting here and Bossy DIY. thx.

@CMCdiy Жыл бұрын

For opening I used torx T25

@d4b4y4re4kid Ай бұрын

You have to get the t25 anything else will strip it. I have had luck with a small flathead but again you risk stripping it

@shivlettedumpling5759 Жыл бұрын

Im getting to the part where you hit the Allen key with the hammer and mine won't unscrew still 😢 it worked on my old bosch but my new one just locks up

@CMCdiy Жыл бұрын

It probably tightened a lot more or the paint on the screw is fresher and stronger. The principle of disassembly is the same

@raptorswire7212 Жыл бұрын

dude, you actually cut it open....is this how you repair most of your tools?

@CMCdiy Жыл бұрын

I cut it so you can see what's inside. This chuck has deviated jaws and is blocked, the only solution is to replace it with a new one.

@gordonbrown9382 5 ай бұрын

And if it wasn't knackered before it is now. Amazing now we have a ideo to show us how to F--k up your chucks for good.

@chongtak Жыл бұрын

in other words you need special tools to fix a simple tool. That modified allen key could be replaced with what?

@CMCdiy Жыл бұрын

Here we are talking about a chuck with locked jaws, to be able to undo it we use anything that fits in the available hole or we clamp it in a vise

@countmorbid3187 5 ай бұрын

You can take em apart without destroying them...

@rbsmanian729 Ай бұрын

👌🏾

@resandor Жыл бұрын

Can someone tell me what size alley wrench was that?? I followed step by step all the way up until that part because he didn’t show what size

@hammyandcabbage Жыл бұрын

Ever get an answer? Same here

@CMCdiy Жыл бұрын

What key are you talking about?

@CMCdiy Жыл бұрын

What key are you talking about? To open the chuck, a simple Allen key is used that is clamped in the jaws of the chuck

@hammyandcabbage Жыл бұрын

@@CMCdiy @1m25s

@d4b4y4re4kid Ай бұрын

Any allen key works as long as it gets locked in by the jaws. Preferably the biggest allen you can fit in there would be best

@VelardeSebas 8 ай бұрын

Hola, acabo de comprar mi primer taladro a medio uso GSR 10, 8 Voltios mi pregunta es cuando funciona es normal que tenga un olor a quemado

@d4b4y4re4kid Ай бұрын

Si tiene carbones si el olor es normal pero si no tiene carbones entoces no es normal. Tambien si lo compro nuevo de la tienda es normal solo necesita usarlo.

@atnstn Жыл бұрын

So what's the lesson here? Greasing more often?

@AJAY-ru3cl Жыл бұрын

Agar drill bit fas Jaye to kaise repair karenge?

@CMCdiy Жыл бұрын

if the jaws of the chuck are blocked, cut half of the chuck so that you can reach the screw that fixes the chuck

@ferdzfalogme-zw8lk Жыл бұрын

What parts of drill that you replace man

@CMCdiy Жыл бұрын

In this video I show what is inside the chuck

@LuisHalcon-tv3md 11 ай бұрын

boos tanong k lng po kng saan makabili ng switchbosh portable

@pierre-yvesdubreuil9315 Ай бұрын

i insert a big allen key, then tighten it, hit it with a hamer, but the whole thing just rotates with a bit of force/impact applied...nothing comes loose...wonder what i'm doing wrong.

@CMCdiy 14 күн бұрын

Hi Maybe you didn't remove the screw from the inside. It is unwound counter-clockwise

@pierre-yvesdubreuil9315 14 күн бұрын

@@CMCdiy No that's not it. i tore down the drill to try to find what is causing the play/wobble, and it seems like poor quality control. i even sent it to bosch for check up and it returned the same. Bearings are just loose and it's tough to ''repair'' it works ok, but i have to drill straight to avoid any complications.

@yukonline 11 ай бұрын

how to destroy the chuck & to know inside, thanks

@manoelborgesdossantos6295 Жыл бұрын

E melhor jogar fora e comprar um novo

@CMCdiy Жыл бұрын

That's what I did, except that I opened the broken one to see what's inside

@wandinamoinverter3641 10 ай бұрын

beli d mn bos cuk nya

@faustinosouza8896 Жыл бұрын

Cortava a capa em duas partes era mais fácil

@nonots69 Жыл бұрын

Itu servis atau bikin ancor bang😂

@CMCdiy Жыл бұрын

Ini bagus 🤗

@nonots69 Ай бұрын

Itu bukan perbaiki,tapi mengganti

@TorQue_WrenCh 11 ай бұрын

Sir,i only manage to unscrew it while my chuck stuck real bad,i been smash it with hammer few times it wont even budge,same brand same model as in the video

@d4b4y4re4kid Ай бұрын

Make sure its locked on the switch

@pierre-yvesdubreuil9315 Ай бұрын

@@d4b4y4re4kid what do you mean? like between reverse and forward? i tried on mine and the whole thing just rotates with a bit of an impact. it does not stay in place.

@d4b4y4re4kid Ай бұрын

@@pierre-yvesdubreuil9315 did you take off the screw inside the chuck? Its a reverse thread screw. Once you hit it with a hammer the chuck should be able to unscrew off

@pierre-yvesdubreuil9315 Ай бұрын

@@d4b4y4re4kid yes i did! with a big allen key inside secured, i can rotate it (the whole chuck) with my hand with a sudden push on the key. with a hammer, it only does the same but ''easier'' and i it will indefinitely. I may just leave it like that because i only want to see if there is something wrong because there is a play (wobble) , like there is a missing bearing.

@d4b4y4re4kid Ай бұрын

@@pierre-yvesdubreuil9315 there is something missing on yours and its probably the little i think they are called dogs which are is the brake for the drills chuck. So youll have to open it up. Take out the planetary gears all the way to the chuck thats where those dogs are at.

@lezbriddon 14 күн бұрын

and it will never work again......

@CMCdiy 14 күн бұрын

Hai This is just a presentation to see what's inside a chuck, a new chuck is mounted at the end of the video

@hgr4255 Жыл бұрын

Funny, another video shows to turn it counter-clockwise, but you show clockwise. I'll try clockwise now because it aint goin' nowhere counter-clockwise. By the way, it's a piece of Chinese junk masquerading as a Makita. In my case, the jaws are all misaligned, won't turn.

@supeskrim Жыл бұрын

The viewpoint from the front facing the chuck: the inner screw is open reverse (clockwise). The chuck itself open nurmally counter-clockwise. Since Bosch cordless drill are spindle lock automatically it won't be needing "hammer once for the chuck" like corded drill (free spindle).

@hgr4255 Жыл бұрын

@@supeskrim I'll try anything that works. I even liked that Chinese replica, it did a good job until the jaws locked in place. I guess it's time to throw it away after another try. Thanks for your advice.

@hgr4255 Жыл бұрын

@@supeskrim Maybe I'm not clear about my situation. Yeah, the jaws are locked, but one of the jaws is not in position with the others which is causing the problem. It's halfway retracted and the others are in a different position.

@CMCdiy Жыл бұрын

Those jaws should be aligned. You have a blocked chuck, you have to get to the screw inside the chuck that loosens in the direction of threading and then force the chuck to unscrew normally in the direction of threading For the same reason I also changed the chuck.