what?

Try to connect the digimon first, that's what I did. I think that the tool doesn't have a GUI, it just runs from the command line, so you don't actually see what's happening, only the outputs.

Yes, you can.

I also was thinking this, as text in the Vb dims was just images too🤔

That's what he shows in this video, he doesn't show him changing the monster's sprites

I would submit and an issue to the creators github repo.

Yes

@@zarcha I’m sorry, how to hold that without button?

@@Hati103 you can use the button membrane OR as i do, use a switch soldered to test pads to make the device think you are holding the button down.

well, how are you going to get DMX or DM20 roms without access to their chip? unless you are meaning to remake those roms from scratch?

the programmer setup is extremely straight forward. As for vpet teardown my battery video covers the back part of the shell and then just two screws (one next to the battery and one next to the speaker wires) to remove the pcb.

@@zarcha sounds good just wanted to make sure you didn't have to do anything special to the programmer. I'll check out the battery video thank you.

Use command prompt, powershell is mainly for doing stuff to windows

power off is enough

Hi bro, did you manage to handle the error code? I'm facing the same error.

@@bapukabis kinda??? I'm not sure what I did differently but it eventually worked. Sorry I can't help ya. 😅

only the colors, the 97 and alike dont have an exposed rom. Even on newer ones like the DM20/DMX only have a save data flash chip and cant do anything like this.

@@zarcha ok thanks man.

yes

Can share the original or English dump file for V2?

@@SaenKS I only have V1

the tool now supports just passing a device version which includes pen color's from what it seems

Able to do 1 tutorial video on it bro?​@zarcha

Yes

Looks like sprite tool has had a lot of upgrades since you made the video and containing presents now? Haven't got my usb tool yet but been looking into it, maby it's more simple now? Would love to see a new video uploaded using the latest versions or at least hear your input for the new updated tool and v5, the main thing that confused me was the offset number, what's that for and where did you find it, it's clearly different between V1 and V2.

Yeah this does seem to be the case and i may upload a new video going over just the dumping side again.

​@@zarcha just worked it all out on the latest versions of the software for my V5 model which should be the same on the V3 and V4 also. (These 3 models need rename on the new sprites, file names don't match. Written out a modified txt doc to make it easy in future when I get other models to flash. About to do final write now to test.

I got the same question

Update: for anyone having issues, if possible, try another programmer but keep the same steps. I bought the same one used here just to keep things easy and could not get it to cooperate. When I busted out my TL866 programmer, I was able to accomplish everything including the writing in just a few minutes.

Can't say for sure but I definitely messed up about 4 times and still had an ok result. Just be sure to copy over any file you start with, so you have an original just in case

You ever get yours to turn back on?

Just flash it back with a good bin and u good to go.

Me too, i need the original dump file to flash 😢 grateful if you could help

​@@Ausbrookssdo you have to V2 dump file?

Maybe but not a lot. There are still limitations to the device. Even though the flash is 8mb, we are actually limited to 4mb it seems.

@@zarcha with the Zelda game and watch I soldered on larger think that may be the case? or strictly software limitation

@@rog-nividiadigimon9354 it already has a larger space than it can use, im unsure if its hardware limitation or not but it was explained to me that it was not something we could fix.

Hey we’re you able to find the DMC rom data? I want to mod my DMC v2 but I don’t know if anybody has uploaded a clean backup in case this might happen to me.

Hey I have a good copy of DMC V1 Rom. But I need a good copy of v2 rom. Do you have it? We can exchange these.

@@bightw24251 I am having trouble reading the chip with my programmer can I ask you where you got the software and drivers when I connect the programmer to my v2 it does not see it connected and the video doesn’t say what program he’s using or where to get the drivers so I’m kinda stuck. But I would like to exchange files when I figure out how to dump them.

@@mojoe84 you can leave the way to contact you if you have any problem

@@bightw24251 Do you still have the V1 ROM? And if so, could you send it to me? I must have messed mine up because everything works except for my volume.

Yes! i'm making a poyomon to seraphimon, just waiting on my color ver to arrive

​​@@PixelPi13 where u gonna get these digimon sprites?

@@PixelPi13 That was my Idea! lol

@@ivanng3140 someone dumped the next order sprites on redit, but let's be honest, it's not that complicated to replicate them 😂

me please! if you have a v4 aswell, I'll be very grateful!

Please I need a v2 dump too! Can you send it to me?

I hate to ask but I lost my OG copy of the dump and corrupted the one I needed to flash. Can I get a copy of it as well?

Can I get the dump of the English. I can’t figure out how to run the sprite editor. I don’t have an .exe file

Is there any chance that do you still have the dump? :S

I don't think so, just take your time and always keep backups of original files.

​@@MMedleyW I forgot the ?

yes

@@aidan14 ok thanks

He’s got the programmer listed in the description

im on the 0nl1ne, Digimon Hatchery, and W0rld discords under the name Zarch. Im not the best for actually making sprites but ill answer questions in my DM's.

@Zach Lambert hey zach! I found the problem already. I did your code on a V2 instead of V1. Which cause the error! All good now. Man, you weren't kidding on the import part. Had to hold down the reset button for 5min, i could feel my arms falling off! Hardest arm workout in my life!

@@financeshogun657 I plan on picking up a V5, what was the fix?

Make sure you're in the dmc sprites directory. When you open cmd, it should be at the desktop directory, just type "cd DMC Sprites" and hit enter before trying the commands Unless you have the folder somewhere else. In that case, the easiest thing to do is to move it to your desktop and do what I said above Edit: !READ ME! I noticed he didn't mention to type the folder and exe before the commands in the readme Type \CyanicDMCSprites\ before the command without a space after the \

@@skeome aah cool, bin a wile sins i last tryed , wil give it another shot next weekend, are there any extra informational vids like these now ?