Webra T4-40 A Garage Run

Рет қаралды 2,610

Ай бұрын

After getting this engine sorted out I decided to make a run video even though the weather was not good. Zinger 11x5, OS F plug,
Links to review article:
sceptreflight.com/Model%20Eng...
sceptreflight.com/Model%20Eng...
sceptreflight.com/Model%20Eng...
Link to Engine Manuals:
drive.google.com/drive/folder...
Follow me on Odysee too
odysee.com/@Davids_Stuff:3
To contact me via email please watch:
• How To: Search and Con...
Answer to a frequently asked question
• Do I fly airplanes? A ...
What I think of assumptions
• Post
To donate to help keep this channel operational please click the link below. All donations will be used to fund projects for this channel.
www.paypal.me/dmrcflyr2

Пікірлер: 24

@mikemorgan2733 Ай бұрын

So glad it was just a simple timing issue for you. I'm sure it was a let down feeling at first. Your years of working with engines has really paid off and the tear down video was aces. Gorgeous engine, but then again Webra has produced some of the most advanced engines at times. thank you for posting this video.

@calvinharned6421 Ай бұрын

Detective David at his best.

@ChetanGreywolf Ай бұрын

I have a Webra T4-80 that runs very well. I experimented with a spark ignition setup and it also runs very well on Trufuel for two stroke engines. I'm glad you solved the problem with your engine and got it to run great.✌

@michaelschindele5484 Ай бұрын

Man , David that engine really hits with some authority when it runs . Sounds great .

@GOLTURBO555 Ай бұрын

Im amazed with this engine. Beautiful! Nice job David

@weofnjieofing Ай бұрын

Great diagnosis and troubleshooting David! Was great to see it go from no start through to running great. I don’t think too many ppl would have the skills you have to troubleshoot such a problem. Was great to see your diagnostics skills at work!

@SandyPerdue-kb1hv Ай бұрын

Great job never heard one of those run before.Thanks

@keithgoode9726 Ай бұрын

Thanks David. That's a sweet engine!

@alanreynolds2125 Ай бұрын

Sweet David 🎉

@markoreilly3414 Ай бұрын

A "tip" for reassembly & belt installation ~ Leave the Head bolts out, while sliding the belt onto the top pulley, it allows you some "play". Then install Head bolts & check the Timing. You may be correct thinking it was a previous owner, as I was lead to believe Webra, factory ran every engine , back in the day. Good to see it running 👍

@dmrcflyr2 Ай бұрын

Loose head bolts ineffective because the minimum distance for installing the belt is with the head fully seated. Plus it is easier to keep the timing with one less thing moving.

@Tom-wl9sx Ай бұрын

Nice work, runs great!🙂

@elpunto231 Ай бұрын

These engines are very good..i have 80 and 90 size..

@dmrcflyr2 Ай бұрын

Hi Blaž

@b.w.oostdam8875 Ай бұрын

Smooth and sounds like a powerhouse! The rorary valve system sures makes for good 'breathing' of the engine apparently

@luisgarza2036 Ай бұрын

Sounds really healthy to be in the first stage of break in process, for sure the timing was way off because someone without experience messed it up, not from factory.

@Irvine7214x6apc Ай бұрын

At last, it runs as it should and I also don't believe it was mis-timed from the factory. For a practically NiB engine, she ran pretty decently for sure.

@billjones3071 Ай бұрын

👍👍💥💥

@rcsendandblast1579 Ай бұрын

Good job Sir Ya the amount of oil leakage from running is what I am wondering how much is normal My pipe throws so much oil it coats the entire table it’s bolted to Is it supposed to shoot that much oil out the pipe Morgan fuel 15 percent 👍

@daveboatman4024 Ай бұрын

Just for giggles you may want to pull the muffler pressure line and see how it runs. I have an OS FS40 (first version) that runs roughly with pressure but runs like a sewing machine without pressure, just saying…

@dmrcflyr2 Ай бұрын

Yes I have had older OS and some Enya four strokes that came with only a header and no pressure feed and they run fine. Typically the manufacturer knows best and if a silencer comes with a pressure feed it is best to use it. I did pull it off and immediately it became much more erratic. So been there, done that many times.

@ronaldwitt2533 Ай бұрын

Man that engine is stout

@harveynewman4333 Ай бұрын

thats a really strong, 40, 4 stroke. wonder what power difference between that and a os,40,surpass?

@dmrcflyr2 Ай бұрын

Good question Harvey. The review articles stated that this was sort of a cross between 2 and 4 stroke engines as it can handle a wide variety of props and RPM ranges happily.