I loved the, "either a deer or a person, I don't remember🤷‍♂️"

Man, the comedic timing of that cricket was impeccable

As a body mechanic I will give you a little advice from experience, hoods are extremely hard to repair and normally are just replaced. The best test you could have done is on the fenders/quarter panels. Also the hot clue isn’t meant for sheet metal it’s made for plastic body panels

I think you're supposed to put isopropyl alcohol in the spray bottle to dissolve the hot glue and have it come off more easily

The cricket in his garage made me laugh every time lol

Tyler stomping holes in his car. This is the kind of quality content I get online for.

The dent on the side of the hood is definitely a secondary hit from when the "deer" bounced up and over the hood. I can't really speak to pulling out dents though. After an "accident" I usually burn the car or drive it into a quarry. Edit: I mean, that's what my friend does.

When learning how to use at item, it's always best to watch this channel first. Learning what NOT to do first, will make you much more successful later!

Already know this is gonna be a banger. Wonder how much tool missuse this will entail lol

I like the off camera assistant giving his/her cricket opinion on what you're doing Tyler.

From what I’ve learned with dent removal is you work around the dent working your way into the middle. This will relieve the tension of the dent and sometimes just doing the outer edges will the center of the dent. Dents with creases are the most time consuming because the crease has to be worked on first before anything will come out. Always good to see honest testing on things readily available items to the public.

The cricket during the hot glue one is my thoughts exactly

Just a heads up the bottle you put denatured alcohol in it. That will get the glue off the tabs (the super big one you had) and off the car. The types of glue are for the heat where your at. The black is best to use in winter and clear/yellow for the hot. They also make a red one as well. Unfortunately those tools won’t work for your car you’d need a actual tool bad and go under the hood with a torch i would suggest. And I’d use a pdr hammer and white tool to knock down the high spots. But anyways I do this for a living those kits unfortunately won’t work for you good because of the metal it’s a old car and your hood will just oil can. (Which is what kept happening when you jumped in it). Anyways those tools definitely work just not in those dents.

I sooo thought Tyler added crickets sounds to his video dealing with the 2nd method, the gluing lmao 🤣

Haha! The glue one was comical! You must've had to use something to take the glue off easier, because the way you were going about it even IF you fixed the dent, you just scratched the crap outta your paint 🤣

“My expectations are lowered significantly after I saw how small this thing is, so let’s see if it works.” Boy, if I had a nickel for every time I heard that…

The level of precision and preparation and execution is superior!!!!

Idk how you're not at 1M subs yet, but you're well on your way. Been watching since early on, you deserve it bud!

0:52 casually saying he might've killed a person

“Idk what this spring is for” “Ouch, that kind of hurt” Spring keeps it from flying into you after it pops free

The spring is to prevent the puller from shooting back at your finger from all the pressure... exactly as you encountered lol.

Bro got eyebags from how much he grinding out these videos. Keep it up dude!

i definitely want to see rust remover or scratch reepair for the car. flat tire repair kits also!

Small Impact dents, like from a hammer, stretch the metal so it is never going to return ... Dent pullers work best on pushed-in surfaces with any creases to the dent.

Also, as a side note: You could use a heat gun to warm that glue some before cleaning it up. Maybe with it a little soft it will peel off better

If Tyler doesn’t do something about his beard I think the garden gnomes are going to sue him for infringing on their likeness rights.

That cricket has has enough of your shenanigans😂 love the video

Slide hammer is actually EXTREMELY effective!!! Because of your lack of ever wanting to read instructions... Dent pulling results will vary greatly depending on SURFACE PREP hence the "Spray Bottle" that these kits come with! (cheap Amazon kits) do not even include everything needed to do this properly. 90% kit.

I think the bottle is for rubbing alcohol too get the glue off but how is everyone supposed to know that 😂

the colours are for different pull strengths, the bottle is used for de gluing when put some sort of acetone

Love the videos man. Always fun to watch. The spray bottle is for alcohol to help remove the glue. The Different color glues melt at different Temps and bond harder to the car (in my experience). As someone who uses the slide hammer method every day in a factory setting, along with curved rods from the inside. You have to start from the outside of the dent and work you way in. Your car body might be too thick though for the glue and those dents might be too big. When I have to pull a dent out of a car too, never light tap the hammer unless it's close. Always use one sure smack. Alot of factors play into the whole thing though, mat thickness, the curvature of the hood and the size of the dent and puller all play a part.

could always try the welded stud dent puller.

back in the 80s I trained for a year in dent pulling. but we used actual screws though the sheet metal and a slide hammer. Zero hot glue in a body shop back in the olden days. I bet the ones that tack weld a little tab to pull on work even better.

I have loved everything I’ve seen on this channel

the ultimate dent puller is a chunk of broomstick and a mallet 🤣🤣🤣😂😂😂 has never failed me

Ive been a body man for 23 years and everything you used today was made for paintless dent repair (PDR). Their for soft small dents like hail damage. Your dents you made require different set of tools.

The little spray bottle is a complementary item to fill with glass cleaner. After you're done pulling the dents from your hood from hitting a person (or deer) you can clean the blood off your windshield and drive away.

I did love the crack repair one, as I love all your videos. I recommend you to all my friends.❤️

I think everytime Tyler has the car in the garage he ages a decade.

I swear lost your channel for a good minute and been searching👀 on God I got excited you cool asf bro keep the vids up

WOW!!! The fact that he even says it is straight forward and simple amazes me!!!

Anyone realising Tyler casually dropping the sentence "...this is where I hit a deer or a person I don't remember witch one it was..."...wtf?!? 🤣🤣🤣

I live for these videos

The crickets in the back ground absolutely killing me 😂😂

Ummm ahhh did directions comes with any of these? Pure entertainment! Nothing more! 😂

Heat gun helps remove glue. Just melt the glue to the point it's soft and it comes right off with the scraper. Dent pullers like these aren't meant for creased dents like the last one you're trying to pull. You're better off using a mallet and block from underneath and trying to bang it out.

Oh that orange mini dent remover is so cute

The squirt bottle on the second kit is for isopropyl alcohol. Isopropyl alcohol releases hot glue and will not damage paint.

Turns out I hate the sound of hot glue guns. Thank you for helping me come to this realization.

that cricket sound effect was spot on hilarious 🤣🤣🤣

Love the car vids😂

The two feet jump on the hood had me laughing so hard. "GANG GANG!" lolol

At about 2:20 I had to pause the video for this: And on the next Tyler video, watch him test the myth that car hoods can be dented! 😂😂

😂😂😂 I am dead after watching you scrape the hot glue off the hood. Thanks for the awesome video.

Stomps the whole hood “Oh.. ok”😂

As a professional repair tech I can tell you that spray bottle is for isopropyl alcohol. Dissolves the hot glue to make it super easy to get off

Ah Tyler... Readily explains what a slide hammer is, stumped by "zucchini". 😆

I always buy something on Amazon, and when it arrives I’m like … no way I got the right item. Yup, I did, it’s just like 3x smaller than I thought.

The dent pullers couldn't work because you filled the whole dent with glue. You would need to use a smaller puller and only glue it to the lowest point in the dent. I think the ones you used were meant for larger dents.

Hi tyler new to your channel,really enjoying your videos and content.they help me pass the time and cheer me up while I'm recovering from a heart attack.All the best from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

When you stood on the hood, I literally spit water out laughing

Dent pullets aren't really for small dents. They're for popping back out large dents. For small dents, banging them from the inside, and covering them with Bondo is most effective. In general, one tries to get a large dent as smooth as can be, and then you just Bondo over the creases, if you really want it looking good.

17:07... My guess for the spray bottle is that is probably meant to have something along the lines of like Goo Gone or other cleaners that break down most types of glue in it so you can get the hot glue to break down enough to be able to get it off without having to scrape quite so hard.

The last shoes I expected Tyler to be wearing were some GANG slides w the blk socks lol

‘This weird device’. They call that a dent puller, babe 😂

I am glad to see you are doing well on youtube. You do a good job with the testing things and are funny. Make me think of how me and a friend would test things.

When you see the "Gang Gang" sandals, you know the video is going to be 🔥

Dude you Jack septiceye and dope or nope were my first subscriptions so ive watched 95 % of your videos this series is top2 of all time please keep them coming. 👍

Would like to see you test headlight restoration kits.

i just realized i’ve been following you for 3 years now

Love the cricket 🦗 sounds during the video.

can’t wait to spend 20 minutes watching this lets go 😄

2:20 mans just started floating wtf🤣

Tyler, Shop Tour!!!!!! Wheres the trash go, whats behind the table and camera and editing. This would be awesome.

How has this man not won a Darwin award yet? "I can't remember if it was a deer or a person. "🤪

My trucks gonna need one of these but in an extra large

the cricket in the background added a nice touch to the video. Even they were not impressed with the dent pullers.

When he says I can’t remember if that was when I hit a deer or a person😂😂

Love the video

Hey Tyler. I used your code for the air up. My nana drinks a ton of flavored water so decided to give this a try so she can drink regular water and still have the flavor

You could do like exhaust patches and tire repair kits and best road side assiasnts bag keep doing these great videos

Thank you for clarifying that up. Now I know what happened to my mother in law.

Yeah back to normal as he proceeds to rub the hammer spot and then Decides to toss the plunger right on top to cover it 😂 Love the videos Bro💪

This is fucking hilarious Love it

"My expectations were lowered significantly when I saw how small it was." I wish I hadn't heard that before. 😥😂

The worst dent he tried pulling with the hot glue set, I kept thinking he’d say, maybe I’ll try the middle of the dent 😂 but nooooo

an old method is to use a blow torch and gluesticks. Attach multiple to the dent(s) and then pull with all your might. Then use some kind of solvent to get the gluesticks off.

"I don't care about the glue"🤣

Scratch repair stuff would be a good one to check out.

"I absolutely love this video" - Tyler reading my thoughts on the last video.

has anyone else noticed that Tyler is starting to look rough like he needs some serious sleep? his face is literally starting to droop. genuinely concerned

Those types of dents you made are actually stretching the the hood especially the one with the metal Hammer haha. I’ve used one of those on a fender dent and it popped right out.

The cricket sound effects really add to the tension of this video.

Yay new video...!

I love how it looked like he floated when he jumped onto the hood with both feet

The slide hammer method is for PDR on hail dents ! It’s supposed to be a one time pop off the metal .

You should review cricket catching Amazon tools and get that cricket in your garage

He made it look like a brand new 2023!!!

Lol Tyler you look like you didn’t get enough sleep before this video 😴😂

*Smacks hood with hammer* (gets a small dent) *rubs dent and sighs* 😂😂 greatest thing ever