Dodge Charger: No Tail Lights & ABS / Trac Lights On

Рет қаралды 184,437

2 жыл бұрын

In this video I check out a 2016 Dodge Charger that came in with a customer complaint of no left tail lights and his ABS Trac light is on. Are they related? Looking at it with the Autel we quickly see they are two separate issues. Let's have a look. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 596

@SouthMainAuto 2 жыл бұрын

*UPDATE:* Customer returned later for the repairs. The right rear axle was replaced along with a new pigtail and light. He also had me install 4 new TPMS sensors to clone his summer wheels. All the lights are off (and on 😉) and everyone is happy. -Eric O.

@richardthomas1743 2 жыл бұрын

Oh my , so they are keeping it. The car still could benefit from fluid film , I know that it is getting crusty but the undercoat would still help to slow down the progression of the total disintegration of the underside LOL

@cgmoog 2 жыл бұрын

No preventative left axle?

@siduramaxde 2 жыл бұрын

shame on him for not doing the left axle while the diff was out...He'll be back! and job security for SMA

@sstrasse7931 2 жыл бұрын

Bro.. you're supposed to replace those wheel-speed magnets in pairs 😉

@dalemyers3945 2 жыл бұрын

If he only had Car Shield none of this would have happened, yea right. As many commercials they have on tv they can’t pay for repairs.

@richard1835 2 жыл бұрын

This guy has taught me a lot over the years. I really appreciate you Eric. My career is better because of you. God Bless

@ekop1778 2 жыл бұрын

DODGE ARE JUNK MY 97 NEON WAS GARAGED EVERY 3 MONTHS OR SO WHY GOT A SUBIE

@Watchman999 2 жыл бұрын

@@ekop1778 cough cough head gasket cough cough

@gingerd2098 2 жыл бұрын

A couple years back I watched him for fun. Now I’m an apprentice mechanic in school learning about wiring right now. Be warned this channel may cause you to become a mechanic spontaneously!

@JacobEcret 2 жыл бұрын

@@ekop1778 how’s your head gasket?

@alexandercopeland2849 2 жыл бұрын

@@Watchman999 I know right, see them all time for sale on facebook market place with bad head gaskets.

@phprofYT 2 жыл бұрын

19 minutes of Eric O. My day just improved 80%.

@PistonShack 2 жыл бұрын

Indeed, not only yours:) it turned just better when it even was OK:)

@SimiNelsonFamily 2 жыл бұрын

Eric, hands down the best. He always teaches us how to diagnose and repair, and approaches it with honesty and sincerity. He finds the problem instead of guessing and throwing parts at the issue.

@tyg9998 2 жыл бұрын

could you reply and tell me when he starts talking about diagnose the vehicle at??

@SimiNelsonFamily 2 жыл бұрын

@@tyg9998, Eric’s diagnosis started with a scan of the systems, leading to the Body Control Module codes, followed by his research of the wiring diagram to understand how the BCM controls the lighting on the left rear and center lights. They led him to the first light in the circuit, which turned out to be the problem. A very methodical approach to discovering the problem. Eric’s videos routinely highlight his methodical approach to diagnosing issues, including extensive testing of components. Many other mechanics would venture a guess and replace parts until the problem goes away.

@frizzlefry1921 2 жыл бұрын

And just as important shows when he screws up. Nobody’s perfect regardless of what’s on social media it takes maturity to admit you made a mistake and fix it. Most people these days it’s just one denial after the next.

@jimvanderveldt4883 2 жыл бұрын

He definitely uses a smart methodical approach… not a try-agnostics parts changer. I learn something new with each video.

@scottjohnson4319 2 жыл бұрын

You have a real knack for teaching Eric, clear and no condescending attitude. Really enjoy watching your videos. All the best and keep them coming.

@pfsantos007 2 жыл бұрын

I think part of it is because he's down-to-earth and not trying to impress anybody in a classroom. Confidence from experience.

@stuckinmygarage6220 2 жыл бұрын

@@pfsantos007 Yup! And funny!

@JLange642 2 жыл бұрын

First time I saw those rear side marker lamps I figured they would be a short circuit nightmare due to the proximity to the tire and slush zone. Good Job Eric!

@LadyAnuB 2 жыл бұрын

There is a permanent fix for this issue but I don't know what it costs to have the proper coating applied to this unit and wiring. (As a former fire alarm technician, I've seen plenty of ground fault troubles pop up on panels after a rain(s) as I currently witness where I live. Didn't see this fault on a new install at a gas station/market with underground wiring thanks to this wire.)

@lugnutgmc 2 жыл бұрын

Upstate NY really takes the cake for ruining cars. I thought stuff rusted in Rhode Island before I started watching SMA. My 2014 and 2016 cars look like Arizona trailer queens compared to anything Eric works on. Another great video! Thanks

@privatedata665 2 жыл бұрын

Changed jobs 11 years ago from Automotive Tech to Oil & Gas . Best YT channel to stay "tuned in " to Automotive Tech and Repairs is SMA . Still gotta cruise by your place sometime because I live very close . Just a drive-by , won't stop in because you are a busy guy !

@_zigzak 2 жыл бұрын

Chrysler and GM are neck to neck in a battle for the most videos 😂

@gatekeeper65 2 жыл бұрын

Lucky guess my a%#. 41 years as a professional electronics technician, and your logic and troubleshooting skills are second to none.

@Flinix 2 жыл бұрын

Been watching your stuff for years, Eric. Always amazes me your expertise with understanding wiring diagrams and your experience telling you to chase target items first in diagnosis. I'm mechanically inclined, but boy do I strive to have that kind of experience one day. Love your stuff.

@mondragon9282 2 жыл бұрын

Perfect timing, just went to lunch!

@austinsmith5997 2 жыл бұрын

Lucky bastard

@RenoBusdriver 2 жыл бұрын

My grandfather was a mechanic worked for the City of Reno, NV. Self taught man with no high school or college education. He told me, if you want to be mechanic, learn electronics as that is where we are headed. He was not wrong. I imagine him scratching his bald head trying to diagnose current day electrical systems.

@flyboy2610 2 жыл бұрын

Love your channel, Eric! I really like the way you explain not only WHAT you're doing but WHY you're doing it! You know the old saying "Give a man a fish, you feed him for a day. Teach a man to fish, you feed him for life." Thanks for "teaching us how to fish"!

@DaddyBeanDaddyBean 2 жыл бұрын

Don't forget, Napper (not a sponsor) has two different rear CV axles for that car - you don't want to install the wrong one, reinstall the diff, reinstall the exhaust, weld it up, and then do the whole job again. Fab Rats, "We do it nice because we do it twice." :-)

@robertrichardson1133 2 жыл бұрын

I remember that video, suprised this one didn't give Mr O. some terrible flashbacks!😂🤣

@DaddyBeanDaddyBean 2 жыл бұрын

@@robertrichardson1133 He's suppressing the bad memories. Can't say I blame him. 😁

@flagmichael 2 жыл бұрын

Sometimes what I get most out of one of your videos is a heartfelt relief that I 1) don't live in the rust belt and 2) don't have a car with access problems like that. My anxiety level was rising just watching it. I'll watch the video where you do the repairs but I'm going to cover my eyes when you get to those two evil bolts.

@tylerz9291 2 жыл бұрын

After watching this I say "thank God I live in Texas!" Keep up the good work Eric O!

@CraigSmith568 2 жыл бұрын

I remember the other video where you pulled the axle. You got it all back together and had to take it apart because they sent the wrong axle.

@SouthMainAuto 2 жыл бұрын

Don't remind me 😂

@markh.6687 2 жыл бұрын

Craig wins 10 Internets!

@salvadorsepulveda6415 2 жыл бұрын

Really like your channel. I'm glad I never had to work in the rust belt. I was lead mechanic for my school district in southern california for with 98 school buses. Retired now. Keep up the great work ! Blessings 🙏

@jmabs5096 2 жыл бұрын

Rust belt is probably half the battle tbh. 20 pound sledge hammers, acetylene torch, "Big nasty" 1/2 impact and can of PB blaster is a necessity up here in Northern states!

@maximejette7674 2 жыл бұрын

its so nice to see someone use a autel scan tool instead of a stupid snap on.

@billogrady882 2 жыл бұрын

"The People's Republic of New York"? I'm sensing sarcasm. Accordingly, the Party will be notified.

@vwwrenchie314 2 жыл бұрын

That car is "complements of the management, Mr.Wick"

@DDD-us6uu 2 жыл бұрын

Its one thing having all the right tools, but your amaziing the experience you have knowing what to do at the right time, man I wish you lived near me. 😎😎

@lvsqcsl 2 жыл бұрын

None of that had ANYTHING to do with luck......That was your experience telling you where to go, Eric. Luck is when you fire the parts cannon and it fixes the issue. I recently had body work done on my Grand Marquis and the rear air suspension was inoperable when I got the car back. The body shop had the left front fender off the car and I suspected they had to unplug the air compressor located under the air cleaner. I checked the compressor and no power. I got a wiring diagram and those yaahoos forgot to plug the harness back in. It is because of you that I knew how to do that, Eric. Great video!

@tattoochef 2 жыл бұрын

Well ill be jiggered, a FCA product with an electrical issue lol. Awesome stuff as always Mr.O!

@boatingcharlie1 2 жыл бұрын

Nice job! I wish all mechanics had the logic thinking to track down the real problem. So many people just throw parts at them and have no clue.

@unclea8148 2 жыл бұрын

You may say fake it till you make it Eric O but the guys I work with have a different motto. Fake it till you break it! 🥳🥳🥳🥳

@donquijote6030 2 жыл бұрын

Eric O. has to be the best mechanic on the YT. No offense, of course, to the many other mechanics that watch his videos. Your prowess in troubleshooting is really impressive.

@patrickzadd5215 2 жыл бұрын

Eric you are my spirit animal!

@TarZan49 2 жыл бұрын

Thank you for the great content. I just drive cars...I never knew how complex they are until SMA.

@LadyAnuB 2 жыл бұрын

There's a video he did where he was working on a 1941 model and while it is less complex electrically/electronically, it has a bunch of lubrication points on it. So you exchange code reader/setter for grease gun.

@echowhiskey2411 2 жыл бұрын

Was that pin fretting in that connector or a short across the two pins? Anyway, this vid was pretty awesome. You're a master technician and I've been watching you for years. I'm the diagnostic tech at my semi truck dealership and your channel has given me a huge edge in electrical diagnostics over the years. Thanks for all the free education. I learn more from this channel than I did when I went to college for automotive technology. Do you have any audio system experience? Would like to see you tackle some ground loop/garble audio issues.

@melvinjones3895 2 жыл бұрын

Lots of work for a magnet but everyone is happy.

@Fix_It_Again_Tony 2 жыл бұрын

I like how they have the model name on the brake caliper. Must make assembly easy. Why not use a small wire brush on the threads of that axle to remove some of the rust before trying to take the nut off? I'm sure it still wont spin right off, but I've found it usually takes some of the fight out of rusted fasteners. Then again when I work on cars I save money I don't make money, so if it takes a bit longer its usually not a big deal.

@300DBenz 2 жыл бұрын

I have a wire wheel on a die grinder for doing exactly that. It also helps with tie rod adjuster nuts, swaybar endlinks, exhaust bolts, and cleaning off wheel hubs.

@osrr6422 2 жыл бұрын

@@300DBenz Little bit of lubrication of some sort (WD40, "Penetrating" oil, used motor oil, etc) helps even more when they're rusted.

@garykirk1968 2 жыл бұрын

Could just use a Milwaukee and zip it right off..

@jameswood7712 2 жыл бұрын

Need to add some mirrors to the inside of the garage door would be able to see rear lights while inside car.

@freetolook3727 2 жыл бұрын

I commented on that a few videos ago. Would save a lot of running back and forth.

@jimhaines8370 2 жыл бұрын

Wow a Chrysler with electrical problems how rare

@abel3619 2 жыл бұрын

Right I’ve never seen that before

@jeffpuras7501 2 жыл бұрын

Yep. Because no other mfg has any problems.

@Justacogg 2 жыл бұрын

Thank God these folks have someone like yourself up there making our way through the soul and the rest that’s eating their cars alive! I can’t imagine going out and spending $35-$45,000 on a new charger sedan and having it look like that after five years! How do you have a nice car up there? My guess is you have a beater that you drive most of the year and a couple of weeks out of the year we take out the car are you really want to drive? That’s incredibly rough on cars up there and the poor souls that have to maintain them.!

@topmoptopmop1234 Жыл бұрын

We need you in South Carolina. No rust to deal with😊

@nickdagreek203 2 жыл бұрын

Free education from the best shop teacher on the planet! Thanks again!!

@rickastronomo2846 2 жыл бұрын

Thanks is not enough for SMA, I'm very thankful we have South Main. Take Care and God Bless

@billmcdonald1296 2 жыл бұрын

Thanks Mr. O for turning me on to Ivan at Pine Hollow Diagnostics!

@bradklingensmith 2 жыл бұрын

I'm not a mechanic, maybe a shade tree one, but I never miss a video. Eric O is a mechanic treasure.

@robpeters5204 2 жыл бұрын

Glad to see you back Mr. O!

@busterhymen3115 2 жыл бұрын

Eric I really enjoy your videos AND you have taught a very old A&P mech about modern hardware. It is nice to hear someone call an AC generator by the proper name. Almost no one understands that the word "Alternator" is simply a contraction of the words alternating current generator. Thank you

@gone4days956 2 жыл бұрын

Man, I have to stop taking Arizona living for granted. My 2003 truck looks basically new underneath.

@inothome 2 жыл бұрын

That magnet, she gone! Like a fine upstanding citizen in St Louis with a free tasty beverage from a nice gas station.

@ennengb2010 2 жыл бұрын

I always keep an eye out for new videos from you. I really enjoy them

@mmeter3 2 жыл бұрын

great work/diagnosis but its not a real vid without seeing the lovely Mrs O and what she's cooking for lunch or just hanging out with you in the bay while you work. add the kids and dogs/cat . its a family show........

@bruceminerly6297 2 жыл бұрын

As always, great diagnostic and detective work. Gotta love one of those codes, though. "Implausible Vehicle Speed Detected"...reminds me of Spaceballs..."Ludicrous Speed!!"

@dougmiller7643 2 жыл бұрын

Nothing short of a miracle worker Mr O certainly is.

@rafalk964 2 жыл бұрын

Man, it's been a while!!! Ivan popped like 3 videos since your last. Glad you are back

@jobe20001 2 жыл бұрын

Love your video's Always looking forward to the next one. I've always enjoyed working on cars and troubleshooting the difficult stuff. I've kept it a hobby and decided early on not to do it for a living for fear of losing that enjoyment. It's obvious you still enjoy working on cars and it shows in the quality of your work.

@Krimsonrain 2 жыл бұрын

Always a good day when there's a new electrical diag video to watch. Just in time for lunch too 😎

@billscott2472 2 жыл бұрын

Great video Eric. Enjoy watching your videos

@richarddebertin6742 2 жыл бұрын

Really enjoy your videos I am so amazed at your diagnostic skills. Love your great attitude. Thank you for sharing your skills with us

@2theslasher 2 жыл бұрын

Good to see ya Eric

@Toyotaguy999 2 жыл бұрын

Gotta love brown and green connections lol, helps find the issue, great job Eric O 👍

@richardclark7948 2 жыл бұрын

Every day is a great day with S.M.A.!!!

@thepaperboy9009 2 жыл бұрын

Love the logic and detective work!

@agmc4me 2 жыл бұрын

Good lord man 5 years old and that crusty. You have a hard job

@user-os2es4es9y 2 жыл бұрын

Once again thank you mr.o hope all is well with you and your family! Nothing but love and respect here in the burgh

@ronspencer6668 2 жыл бұрын

the "fuzz", lol haven't heard that term in a while! Glad your back.

@JorgeLopez-ix7up 2 жыл бұрын

You do know your stuff professor Eric O. Thanks for another worthwhile video.

@mtebaldi1 2 жыл бұрын

you should be videoing even though you have already done it before. It's enjoyable to watch your videos.

@onlyactingup 2 жыл бұрын

The fuzz an oldie but a goodie, thanks Eric O. And a happy new year to you and your family my friend.

@guyconnell2250 2 жыл бұрын

I'm only 3 1/2 minutes in. Hopefully the new Dodges don't just turn off the circuit after x number of tries like the trailer brake circuit on the 2006 Dodge Ram. In that event you have to have the TIPPM reflashed to turn the circuit back on, and you can only have it refreshed five times. Brilliant! I couldn't think of anything better. Except maybe a fuse?

@jayjaynella4539 2 жыл бұрын

Somewhere in the millions of pages of documents delivered to each car company, issued by the bureaucraps in Washington who all hate automobiles and any form of personal transportation, is a regulation that requires what you just described above. Ralph Nader never had a driver licence yet he got the Corvair put out to pasture because people did not know how to drive a rear engine rear drive car. Gotta protect people from their own stupidity.

@daniellma 2 жыл бұрын

"Tell me what it's all about..." haha, the Hokey Pokey, great way to turn yourself around. You continue to amaze, and entertain...keep up the great work!

@Stover1928 2 жыл бұрын

I always learn when I watch you work. You are a great mechanic/technician and teacher.

@uglysteve1 2 жыл бұрын

Not a guess. An informed opinion.

@skip1835 2 жыл бұрын

Thanks for the reminder to steer clear of Chrysler - course the possible failure points on any brand these days is beyond my "old guy's" comprehension limit - - - a serious scan tool to figure out wiring/rust/corrosion issues? omg - - glad I left the trade for more money back in my early 20's - - Kevin, you're the man - ya make it all look easy - - and seeing as how I don't comment very often, I trust that you're taking care of your much better half - ya struck gold when she said yes.

@jeffryblackmon4846 2 жыл бұрын

Well done, Eric. Experience and logic win! Thanks for the video.

@kenpressley8420 2 жыл бұрын

Great video, Eric O. Keep 'em coming.

@williamdyckman9704 2 жыл бұрын

Eric, find the diagnostic stuff very interesting. You are such a master on it and I am trying to learn as much as possible. Thanks, for the video!!

@normmuelleman2570 2 жыл бұрын

Thanks for the update Mr. O!!!

@VDPEFi 2 жыл бұрын

I learn so much from your videos, your logic based approach has really helped me sort some electronic issues on my wife's Mercedes, it all lead me to the ECU and that was a hard trigger to pull in terms of the cost but I stuck with what I had logically discovered and now it starts perfectly in the morning, so thanks very much!

@AS768 2 жыл бұрын

You're a truly brilliant mechanic; well done!

@victorbellan8357 2 жыл бұрын

Always learning from your videos , thanks

@badchevyc76 2 жыл бұрын

Eric, you have taught me lots of tricks and appreciate the encouragement words of " If I can do it, you can do it" . So far I have been servicing my vehicles for a while, saving me a lot of cash. Keep doing a great job.

@mikeberry304 2 жыл бұрын

I have used a 3mm pre wired led , soldered to loom when it's not available from agents , tiny drill hole through light unit , siliconed up after to seal , happy temporary/permanent repair when the customer is tight , great video Eric , it drives you man when the car shuts the circuit off and you have to cycle it every lime you test 🙃

@johnweiland9389 2 жыл бұрын

You have great skill at troubleshooting problems.

@jeffgortz338 2 жыл бұрын

Hey Eric !!!!!! Don't hate me b.c. I'm a k.c. chiefs fan !!!!!!!! I will always love your channel !!!!!!😘😘😘😘😘😘

@philmerrifield1163 2 жыл бұрын

Great video dude as always love the content stay well and safe everyone. I could think of some teaching analogies but a lot of them aren't kid friendly

@mikewilliams348 2 жыл бұрын

Hoy hoy SMA post some videos I need my SMA fix ,I'm jonesing for more SMA. THank you for the channel and education

@donnovanmallen384 Жыл бұрын

Thank you so much!! Only video on KZfaq that helped my issue with the tail lights!!

@jorgefernandez-mv8hu 2 жыл бұрын

Your method is on point fella. Thanks for the learning lesson.

@johnds6621 2 жыл бұрын

What I like about your videos is that you teach and show us stuff that one would never learn from a book or trade school. By the way once you replaced the connector did it in fact fix the issue with the rear lights?

@donaldross1077 2 жыл бұрын

Retired GM tech, nice job. I believe I also ran into the remove the axle problem. I torn the whole suspension loose and then dropped the differential before I got it out. What a great design. Yes I was getting into a lot of resistance wiring problems. Seems the new computers feeding power to these circuit monitor the current draw very close and shut the circuit off if it is not right. Great Job, I live in Okla. still got a lot of rusty wiring. The first Camero I ran into that told me on the dash which bulb was out??? how did it do that, smart circuits.. Don

@LadyAnuB 2 жыл бұрын

I was a fire alarm tech and system wiring monitoring has been done for likely 50+ years in this industry. Moving on to cars, you can take modern electronics and easily monitor a whole boat load of stuff as you've seen. (Fire alarm system stuff is similar given the right panel and field devices.)

@Watchman999 2 жыл бұрын

that magnet looks like the steel drive belt inside a Nissan CVT.....from the factory. :)

@FT4Freedom 2 жыл бұрын

My Ranger would turn over but wouldn't ignite. My heart sunk. Cleaned up the batt terminals. Starts ok. New battery soon. I came to SMA for sanity.

@davidliebler7722 2 жыл бұрын

Darn.. was hoping for a video of that repair however thank you for the diagnostic portion of it!! 👍

@Clynikal 2 жыл бұрын

Got ya customer moving again. I’m sure that made his day.

@unclemarksdiyauto 2 жыл бұрын

Nice diag and logical thinking process Eric! Glad you went with your gut. You can’t beat experience! After your explanation of how system works, the flickering at the start makes total sense. Lights work now! Good to know about dropping diff to do cv axle on these.

@garysgarage3669 2 жыл бұрын

Very impressive! I trust your gut more than any shop I've been to.

@weshawkins7165 2 жыл бұрын

Another excellent video, thank you. I will be patiently waiting for the video of the removal of the rear axle.

@AKChryslertech 2 жыл бұрын

Great video eric! I have dealt alot with that issue in those style tail lights from dodge. Most of what i see is on the durangos with the racetrack tail lights is moisture in the light assembly. They short internally and the whole damn has to be replaced.

@DabblelyDiddly 2 жыл бұрын

Laughed way more than I should have at you calling it a ram and catching yourself. Gold right there.

@rhadden8976 2 жыл бұрын

You called it Lucky guesses, sounds more like wisdom to me. Thanks for sharing.

@PistonShack 2 жыл бұрын

I like logical deduction technique to get to the cause:)

@jamesbruno5896 2 жыл бұрын

Those lights flashed "take me to SMA" LOL

@anthonysimonhough9691 2 жыл бұрын

Good one mate your deduction skills are amazing.

@flagmichael 2 жыл бұрын

I'm super impressed by the combination of troubleshooting skills and patience to deal with salt damage on top of the usual "why did they bury it like this" stuff. No ordinary man, I tells ya.