DODGE CHARGER VALVE COVER GASKET REPLACEMENT 3.5 V6

DODGE CHARGER VALVE COVER GASKET REPLACEMENT 3.5 V6 | DODGE MAGNUM

Рет қаралды 36,039

7 жыл бұрын

DODGE CHARGER VALVE COVER GASKET REPLACEMENT 3.5 V6 | DODGE MAGNUM VALVE COVER GASKET
►Check Out Our Website: mechaniclifestyle.com
Hey guys, in this video we are going to show you how to replace valve cover gasket on Dodge Magnum or Dodge Charger, Chrysler 300 with the 3.5 V6 Engine. It is not simple procedure at all. YES, WE DID SOME EXTRA WORK BY REMOVING THE WINDSHIELD WIPER LINKAGE but that way we will not brake an Intake Manifold that colt $400+. Valve Cover gaskets eventually start to leak. We will recommend to replace spark plugs as well at the time of the repair since you took it apart already.
This might work on:
2005 Dodge Charger Valve Cover Gasket Replacement Removal
2006 Dodge Charger Valve Cover Gasket Replacement Removal
2007 Dodge Charger Valve Cover Gasket Replacement Removal
2008 Dodge Charger Valve Cover Gasket Replacement Removal
2009 Dodge Charger Valve Cover Gasket Replacement Removal
2010 Dodge Charger Valve Cover Gasket Replacement Removal
2005 Dodge Magnum Valve Cover Gasket Replacement Removal
2006 Dodge Magnum Valve Cover Gasket Replacement Removal
2007 Dodge Magnum Valve Cover Gasket Replacement Removal
2008 Dodge Magnum Valve Cover Gasket Replacement Removal
2009 Dodge Magnum Valve Cover Gasket Replacement Removal
► OUR MAIN CHANNEL: bit.ly/2ad33QG
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► 2015 Ford Fiesta ST BUILD Playlist: bit.ly/2a59UKp
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Camera
Panasonic Lumix FZ300 amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable amzn.to/2jjg9Bd
•Computer for editing
Lenovo ideapad 310 amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Second Camera
Sony HD Video Recording HDRCX405 amzn.to/2jk8nqB
•GoPro HERO5 Black amzn.to/2ktNKfj
•Extra Computer For Editing
Lenovo Ideapad 510 amzn.to/2ktOuB7
This is NOT a sponsored video. Everything is purchased by us!
► Instagram: / worldmechanics
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Пікірлер: 28

@AutoRepairGuys 6 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@neilwilliams2947 3 жыл бұрын

You did not mention what the torque is for the valve cover bolts.

@YellowHammer-dz1fk 2 ай бұрын

Thank you!!! Step for step! You guys are awesome

@KaylaJJJones 4 жыл бұрын

Do you guys have video for this same engine with a head gasket replacement

@shbt8875 5 жыл бұрын

Wow that’s a lot of taking parts apart just to change that but great job you guys

@joshuamidgette4846 6 жыл бұрын

Good video. I think I could actually do this now.

@zaganfallenengel 4 жыл бұрын

This video is awesome, thanks guys for sharing... A small request...Can you do some work on a 2.7l V6 engine?

@newwavepressure6478 6 жыл бұрын

Should I use lock tight on the screws when I put the cover back on

@JayMoungMUSIK 7 жыл бұрын

great video do you have a Head gasket Replace video???

@Roltita 11 ай бұрын

hello, please tell me, for the repair of the dodge charger 3.5l engine, what exactly is needed, what spare parts

@pli0utyer 4 жыл бұрын

As mentioned on another video it's easiest to remove the one bolt holding the transmission dipstick tube. It's accessed from underneath the car. Remove the bolt and wiggle the trans dipstick tube up, then push it down and out of the way.

@Sroor2023 Жыл бұрын

Amazing but still complicated on this car omg 😱 but why head gasket is it overheated before or these engines are prone to head gasket issue?

@bernardoalpizar6689 7 жыл бұрын

nice man this is really good help and do U need to apply any silicon on that gasket or no??

@catavingray1444 2 жыл бұрын

I think so I Kno I am

@celproperties5304 4 жыл бұрын

How much would this cost at your shop?? I am looking to get this done but I dont want to over pay. Thank you for the great video.

@neilwilliams2947 3 жыл бұрын

On timeline at 8:48 that's what you should have done instead of taking the windshield wiper motor out. All you had to do was take that bar out on timeline 8:48. The windshield wiper motor was not in the way. Never mind. Towards the end of the video you mentioned we didn't have to take it out. Sorry about that! One heck of a video bro. Kudos

@lauributt8023 4 жыл бұрын

I removed my manifold when i replaced the valve gasket, when i put it back my manifold is having a leak, engine sounds funny and breaks barely work, is this symptoms of bad manifold gaskets?

@angelchavez12326 4 ай бұрын

Needed a new Gasket probably

@bluefeatherlopez7 Жыл бұрын

No gasket sealant?

@Med0sproductions 3 жыл бұрын

just tried this tonight on my dodge magnum. when i started the engine, it began to sputter and leak more oil from the valve covers and my engine is idling at extremely high RPM

@rodrickzahney9735 3 жыл бұрын

I searched this video to learn how to take it off, now I'm wondering where to spray penatrating oil to maybe help unseize my engine

@chaddavis2392 Жыл бұрын

what the fuck did you take the wipers off for

@sherwoodzobl796 2 ай бұрын

You guys are gr

@insanelywicked873 3 жыл бұрын

The first 75% of this video is useless. You do not have to remove the windshield wipers.

@mikebailey6983 Жыл бұрын

Don’t impact them down the valve cover gasket Jesus they only need 8-9 ft LB of torque

@fastcarmagnum Жыл бұрын

That’s a whole lot of bs to get to the point of the video. Not to mention you didn’t even show how to to change out the spark plug tube seals. Way to go.

@freshlyBakedjay Жыл бұрын

DISREGARD Watch at 10:28 this why is so expensive when you go to a shop. They charge extra for labor cause they do too much unnecessary labor. DO NOT REMOVE THE WINDSHIELD WIPERS WASTE OF TIME. START AT THE AIR INTAKE.

@overwatch6831 2 жыл бұрын

Just the fact that your guy used power tools to not only take it apart but then put it back together is just dumb.... no wonder why he stripped that bolt and you cut the camera 😂 if you follow this video please use hand tools and proper torque