Aye this video helped me out a lot. While i wasn't replacing the head gaskets. I couldn't find any other video replacing all 3 of the intake gaskets, but this one. Thank dude!
@crazysexycool1809 ай бұрын
Glad it helped
@marcelinovalerio12386 жыл бұрын
Great work man, your customers must be really happy having a mechanic like you
@olajuwonpowell59323 жыл бұрын
One of the best videos I’ve ever watched with step by step
@JM-it2zo3 жыл бұрын
Helped me out! Great job never seen a tech take the time to clean the head as well as you did! Props man, really helped me out! Thank you! Great job
@crazysexycool1803 жыл бұрын
Glad it helped! please subscribe, and share and watch the rest of the series thanks
@ellisfix4 жыл бұрын
Based on the videos on KZfaq I have seen yours is the best keep up the good work bro
@CoffeeB33n5 жыл бұрын
I was afraid of starting work on my 2006 because I am currently going through a similar problem with the coolant. Now I feel more confident in doing the project. I have the tools, just need the parts. I am hoping its just the coolant pipe. If not, i'll change the head gaskets. Great detailed video!!
@brandonconway13725 жыл бұрын
Good video. Im about to do the Head Gaskets on my 06 3.5. This video is going to be my guide.
@PipBakery2 жыл бұрын
How did that turn out bro???
@blkburtreynolds87913 ай бұрын
Yes! He has me wanting to replace mines myself. Best video I've seen on this subject ‼️
@pastryenthusiastofSA3 ай бұрын
Bro good work!! My first time working on my car and this definitely helped. Appreciate your videos!!
@dennispfohl47375 жыл бұрын
One of the better videos out there, very informative and step driven, thanks Artistry!
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@23thebull2 жыл бұрын
Awesome trick with the white out 👍💯
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@addykneller23415 жыл бұрын
VERY STEP INFORMATIVE. REAL ORGANIZED. GREAT JOB!
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@dizzydavidblitch12467 ай бұрын
You fail to mention you have to remove the bolts from the side of the head that go to the exhaust pipes
@crazysexycool1807 ай бұрын
did you get them out?
@carlweeks92564 жыл бұрын
Looks like one of the head was obviously cracked between a coolant opening, combustion chamber and oil return passage. Never seen that happen on a 3.5. But I looked at a 4.0 (same as 3.5 but longer cylinder strokes) minivan that was obviously puffing coolant into exhaust. I'm betting that's the issue, as MLS head gaskets don't "blow out" the way older composite gaskets do. They're more likely to leak if the surfaces aren't perfect though!
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@JohnSmith-ws5bo4 жыл бұрын
Most of the parts that are most important to visualize for a non mechanic are skipped right over. Its pretty easy to set up a camera on a tripod or you could even zip tie it to the hood.
@billcastillo90902 жыл бұрын
Great job sir, appreciate your time. Helped tremendously....
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@yvettejaimes2682 жыл бұрын
One question What has to be timed when you replace the engine heads?
@terrancel17864 ай бұрын
Dude you look like my uncle in the Caribbean Islands. Lol
@blkburtreynolds87913 ай бұрын
What does this type of labor work usually charge ??? I have a 2005 300C 5.7 hemi with the same issue... I don't want to crush it because this is the only major issue I've had with this vehicle. Great Video by the way too,Man‼️💪🏿
@sterlingwitherspoon57094 жыл бұрын
Use we-40 when cleaning the parts dry is harder.
@JK-dz5zh Жыл бұрын
Helping a bunch, love the vid! But on the exhaust did you jus unbolt the cat from the headers? Thanks!
@alphaomegaello5 жыл бұрын
Excellent video, I hear that the 3.5 mopar is a pain to work on.
@EPICPEDOPONEH5 жыл бұрын
alphaomegaello it is lol i just worked on one the other day
@EPICPEDOPONEH5 жыл бұрын
i said screw it and pulled the engine out to take it apart it was so annoying lol
@horustubes4 жыл бұрын
If you crawl under the vehicle and take one small bolt out of the trans tube bracket you can pull it completely out, much easier.
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@7thundersofrev10Ай бұрын
How did you clean the top of the valves? *Can you go through the opening of lower intake manifold holes?
@SkywallGuttz5 жыл бұрын
Steel brush on aluminum head? I think i'd use scotch brite cookies just to be safe, is this a concern?
@carlweeks92564 жыл бұрын
I'd also be concerned about the debris being blasted on the block when they will fall into the cylinders and oil/coolant passages! Plenty of machine shops do use those wire brushes on the manifold surfaces when they clean the heads and resurface the bottom with a mill.
@jamesanderson40142 жыл бұрын
Really good work. Would it be a good idea to replace the freeze plugs ??
@bilbobaggins59625 жыл бұрын
"the easy way" lol...great video!
@rsr32454 жыл бұрын
How long did this take for u to complete the job?
@charlestornesjr74548 ай бұрын
My son has a 2010 Chrysler Sebring and we want to replace his blown head gaskets. Can you make a video for his model.
@crazysexycool1808 ай бұрын
its the same process
@johnmilner37294 жыл бұрын
so you dint check to see if the head ir block are warped?
@crazysexycool1803 жыл бұрын
block was checked, and the heads were machined
@bigfoot9445 Жыл бұрын
Hi, doing a 4.0L now. How do you hold cam pully when removing or tightining retainer bolt? Thx!
@azaleabethea55345 жыл бұрын
do you have to remove everything to just replace the head gasket itself. have a 2.5 though
@curbsidecustom614810 ай бұрын
My trouble is getting that passenger side cylinder head. I’ve done loosen the timing plate and still can’t seem to get it out.
@crazysexycool1809 ай бұрын
tap with a rubber mallet
@PITT4925 жыл бұрын
Notice the valves were different inside the new head will that effect pressure any
@creteking234 ай бұрын
Since didn't do driver side do you know or can explain why where cam is there's no room at all to lift out head. The housing is tight around,not a big open circle like passenger side.
@JoeWildeVentura4 жыл бұрын
Hi there, love your videos, thank you! I bought a 2007 Dodge Magnum 3.5L, timing belt was replaced, marks line up perfectly after several revolutions of the engine by turning the crank. One intake valve on the passenger side middle cylinder appears to be bent, it doesn't close fully. I am wondering how it would be possible to bend one intake valve on a four valve motor. Is this possible? Could it be something else, or do I need to take the head off and replace the valve? Thank you!
@crazysexycool1803 жыл бұрын
check the compression in the cylinder
@danawick98175 жыл бұрын
nice Video good Job now go out and find a Pacifica with a 3.5 and replace the head Gaskets lol. im sure its the same process its the can you do it in the car
@marcbrazzers7 ай бұрын
Is this the same procedure as a 2010 grand caravan with the 4.0L engine?
@crazysexycool1807 ай бұрын
yep for the most part
@johnpavon799 Жыл бұрын
Thanks for the video, great work! I purchase a tool for the 90 Degree angle guage which help because it saves on White out?
@biglion64945 жыл бұрын
Great videos I like your explanation ,I have one question please how can I find out how to torqe the head gasket is it writing in new gasket ore how to know that, please let me know if you could mate.
@skanda475 жыл бұрын
Will this be about the same guide/walkthrough on a 2.7l Chrysler 300 2008? Will this work on the smaller size 2.7l engine? Any info would be greatly appreciated thanks, and thanks for the video's its really helpful to have! 💯✔❗
@adakaiyazhi5 жыл бұрын
No 2.7 has a timing chain and cams
@skanda475 жыл бұрын
@@adakaiyazhi Thanks for clearing that up. So a metal chain not a rubber belt for time chain on the 2.7 vs this video.
@domanicsnowden92676 жыл бұрын
Can you do a video on how to time the belt?
@haroldflower80085 жыл бұрын
Domanic Snowden i can help. theres two little notches at the timing cover and cam gears. the cam gears have to line up with the notches on the timing cover. as for what position the cylinders must be at i believe it should be cylinder 1 has to be all the way up. hope thag helped
@pioneercaddy4 жыл бұрын
How much that job runs ... is it worth it or just put another engine in it?
@7thundersofrev10Ай бұрын
Was a great video
@flooddastreetradio2482 жыл бұрын
I have a 2007 DODGE CHARGER with 3.5 Liter motor. I had issues with the car running hot, and i drained the oil and antifreeze. I have changed the radiator and the thermostat. I have changed the waterpump just 6 months ago. There was no mixature in the both chemicals coming from the radiator and the oil pan . I was overdue for a oil change so i changed the oil and flush the coolant system car stop running hot, but i having issues now with the car throwing oil from what seems to leaking on the monitfold on the side where put in the oil . Is the a sign of a blown head gasket????
@singhsarabjit2 жыл бұрын
Hello. Did you figure out? Thanks G
@Lilrich2u22 жыл бұрын
Hey bud, is there a huge difference between the 3.5 and 3.6l? I’ve got a ‘12 Dodge Challenger with what I believe is a valve seat problem. Figure I’d take off both heads and have a machine shop resurface everything including the valve seats. Haven’t found a decent video yet that does the 3.6l, if I follow your video will it be close? Thank you VERY much for any help!
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@quincythomas37762 жыл бұрын
save 3.5 07 , could a bad spring under rocker prevent car from starting. after header replacement ?same header you've use.
@doylefountain2555 Жыл бұрын
Why is the passenger a dark brown color?
@nelsonmyers5661 Жыл бұрын
What tool do you use for the camshaft?
@dolinick5 жыл бұрын
thinking about doing this on a 2007 Magnum with the 3.5 V6
@marcussims64942 жыл бұрын
Awesome job
@crazysexycool1809 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@jkingdman5 жыл бұрын
How different do you think the 06 chrysler 300 3.5 awd touring is from this model your working on.
@jwalk1988064 жыл бұрын
J K same motor
@Inviting1word4 жыл бұрын
Thanks brother.
@bradenchestang68184 жыл бұрын
I have a dodge charger 2007 3.5 I would like to have fixed it has a blown head gasket what is the charge to replace the head gaskets
@bradenchestang68184 жыл бұрын
Or shall I say how much do u charge to fix it
@farealwitit794720 күн бұрын
will this work for an 06 chrysler 300?
@zaguu_plur78104 ай бұрын
Is it the same in dodge charger 3.5?
@17millionpercocetplease614 жыл бұрын
What the hell size socket is used to remove the head bolts? 14mm don't fit and 15mm slips and wants to round them off. Aghhh!! (2.7 V6 in an 06 Magnum)
@Klydebandana5 жыл бұрын
Would this work on 2012 5.7 charger
@stephenkoetsier77779 ай бұрын
Cleaning aluminum heads with a wire wheel is a cardinal sin 🤮 your customers must have their heads blow after 10k everytime and also the pistons will carbon up by the time of their oil change. The wire wheel is just making a better surface for carbon to attach and harden so your process will create more carbon on the pistons not like it really even matters
@crazysexycool1809 ай бұрын
the wire brush is not hard enough to do what you are trying to imagine. Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@lowellstevens89775 жыл бұрын
Nice work!!
@BiGMiAMiTV5 жыл бұрын
Your amazing thank you.
@laurenperrotte62383 жыл бұрын
Hi where are u located. Nice job
@lostcloud23624 жыл бұрын
I recently did a head replacement and now im trying to start the car the cams seemed very hard to turn when I was doing TDC timing ... I felt like they were too hard to move so how could the timing belt move them?? .... went to start the car it turns very slowly ... I figured it was the battery was down so I connected jumper cables and got the same result....took the battery to autozone got it tested and charged came back still the same very slow turning... now battery is low again from trying... something doesnt seem right or do I just need to keep trieng so it builds oil pressure to lube the new heads I installed after getting it machined ?????
@crazysexycool1803 жыл бұрын
did you reset the timing?on all the timing marks?
@singhsarabjit2 жыл бұрын
Hello. Did you figure out? Thanks G
@chaseaustin6898 Жыл бұрын
You forgot to mention removing the 2 bolts where the exhaust connects…
@crazysexycool1809 ай бұрын
thanks
@santos2754 жыл бұрын
I have my charger hydro lacked. Can this video help????
@crazysexycool1803 жыл бұрын
remove the spark plugs and then rotate motor.
@ItzDarealJacquan4 жыл бұрын
I got a 3.5 it shakes alot after the cerpan timing belt was replaced keep i did a major tune up none helps the shaking
@jacobturner49225 жыл бұрын
Thanks bro👍
@kennethlemons39995 жыл бұрын
Why you didn’t start with the pattern when puting the head back on
@zxrmuzzy4 жыл бұрын
Awesome video
@Foreiggnnnn Жыл бұрын
Man where are you located man I need this job done bad
@crazysexycool1809 ай бұрын
nc
@reaperschild1234 жыл бұрын
I can’t figure out how to remove the pulley timing gears. I can’t find any videos
@zerkfn85015 жыл бұрын
good job
@djtechinics97dj375 жыл бұрын
the valve looked different on the replacement head
@kinglo845 жыл бұрын
Can you fix mine?
@LorenzoLove56833 ай бұрын
Bra wea u located I need dis done
@davidfowler89593 жыл бұрын
How the shit did he magically get the exhaust manifold off ?? Please add to your next video
@crazysexycool1803 жыл бұрын
ok, kool but its not a hard process, just unbolt it and remove
@johnnyray77903 жыл бұрын
Steel wire brush vs Aluminum head = bad...scotch pad, brass wire brush, or a razor scraper...I believe is the proper way.
@crazysexycool1802 жыл бұрын
a razor can gouge the surface, the bristles on this brush are softer then the metal they are being used on.
@caraddictmotorsports2 жыл бұрын
Just take the time and take it to a machine shop to get hot tanked and decked. I just let my customers know ahead of time there will be a wait.
@SliceDice5 жыл бұрын
What about 2.7v
@russells4514 жыл бұрын
Do you really have to lift the motor up
@emersonsalves62105 ай бұрын
Top demais
@georgetterquincy3912 жыл бұрын
Where u located at
@crazysexycool1809 ай бұрын
north Carolina Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZfaq for more material on a different level.
@rodrickzahney97353 жыл бұрын
I need some help
@isrieldelgadillo34804 жыл бұрын
How do you remove the driver head gasket?
@marieava42135 жыл бұрын
Can you show how to replace a timing belt
@marcoramirez1205 жыл бұрын
just loosten the tentioner witch will be by the one adjustable pully then pull out the belt and look up the diagram for reinstalling the belt witch way the belt went and bam done super simple
@GnarWheel4 жыл бұрын
Is it the same as a 2009
@fdubc30 Жыл бұрын
This ain’t no 5.7 hemi tho.
@crazysexycool1809 ай бұрын
the title says 3.5 engine so what your point?
@blkburtreynolds87913 ай бұрын
He said it's a 3.5
@luissepulveda39514 жыл бұрын
I have charger 2006 same motor as that one
@kennethlemons39995 жыл бұрын
Good video tho thanks
@Elphxdav5 жыл бұрын
If u got oil in coolant in a 300. Take hoses off oil cooler, bypass cooler and half the time problem solved.