Took my one year old 1.8 Focus to Dealers Ford Master Tech for the North West due to constant "knock". He assured me it was the VCT system that was naturally noisey and nothing to be concerned about. I then informed him that this particular engine doesnt have the VCT system.......Wouldnt trust "MOST" Main Dealer Techs with a push bike
@BudKing967 ай бұрын
you n john have a sick, calm, funny n educational dynamic its sick congrats to him doin his first timing belt, im still yet to do that one day #shook
@themarvelousvlog7 ай бұрын
Everyone’s shook with doing a Cambelt 😂
@DanielWoolley7 ай бұрын
Those ford engine wirh welt belts are really good super quiet and efficient one of the best engines ever built i would say had many of cars too
@themarvelousvlog7 ай бұрын
Debatable 😅
@paddyici66297 ай бұрын
i hope this is sarcasm hahaha
@stephenreed10807 ай бұрын
There's a reason why they are nick named the ecoboom. If your a mechanic then you know its one of the worst engines in modern times.
@leeiverson1455 ай бұрын
you know nothing about cars, Been working a mechanic for 35 years and that engine is the pitts.
@paddyici66295 ай бұрын
@@leeiverson145 and i think you know nothing about sarcasm lmao lighten up lad
@tony78uk487 ай бұрын
We've all had that "oh no wtf" moment .lol 🙂👍
@ttatimbo58307 ай бұрын
I did a few of these belts and even with the crank pulley tool to line up the reluctor ring, you sometimes have to reset learned values/adaptives in the pcm - otherwise the ignition timing can be slightly out and although the car runs fine, it stops the stop start function working (background fault codes) It has been a while since I did one though, and I may have got away without resetting learned values last time 👍🏼
@themarvelousvlog7 ай бұрын
I’d keep this in mind if I get codes on my next one
@ttatimbo58307 ай бұрын
@@themarvelousvlog hopefully you won’t, But it does happen. Also found that the laser tool we used didn’t fit as well as the eBay special I bought afterwards when lining up the crank pulley
@16gsantos7 ай бұрын
Nice Video 😊 will be nice to see the full details and steps as you fixing 🙏
@andrewfox78617 ай бұрын
I changed one last week on a seat ibiza , I went throttle body route too 👍
@themarvelousvlog7 ай бұрын
It may be the easier way to do it, I think… 😂
@normanstephens53917 ай бұрын
Glad you always show fails.. As well as successes'. Cheer's. See you in the next one. 👍👍
@NeOAnderson7 ай бұрын
Love this guy, wished all mechanics were like this.... I don't think he'd come to kent to work on my car though. :(
@themarvelousvlog7 ай бұрын
If we have enough jobs booked your area, we definitely will
@brianhume47437 ай бұрын
Brilliant videos look forward to every one, just sayin from North of Newcastle 🇬🇧
@themarvelousvlog7 ай бұрын
Thank you!
@MegaReddevil717 ай бұрын
A mate of mine who owns a garage did one of these cambelts when these engines hadnt been out long and did the same thing car wouldnt start one tow truck later to ford dealers and they couldnt get it to start either so he had it back and worked out what u said in video with the crank pulley
@themarvelousvlog7 ай бұрын
It’s stupid really but had to go back to basics 😂
@rtmetaldetectorillegal71596 ай бұрын
That is the valve cover, the pcv
@mohitl16977 ай бұрын
Vauxhall change the whole rocker with gaset otherwise just gasket will leak again due to plastic warping
@Danny-hx1wk7 ай бұрын
awesome vid once again. biggest job i've ever done myself is a clutch slave cylinder on my old alfa 147. now got a megane 1.5 diesel 10800 miles never had a belt and water pump change do you thing with the tools it's something i could tackle myself?
@themarvelousvlog7 ай бұрын
1.5dci is fairly easy to do. Just need the correct timing tools to set it up and you should be good!
@markb14877 ай бұрын
I paid £44 for a 5 litre,,of Mobil 1 fully synthetic...And there is a hugd difference in it compared to Comma or Drivetec ,,,the cold starts are much improved,,the engine is much quieter,,
@themarvelousvlog7 ай бұрын
100%! ‘You’re paying for the name’- not really…
@Nick_Miles5 ай бұрын
Instead of taking the piss out of customers and laughing at them why not advise the customer on what good parts to buy next time. At the end of the day they are the ones paying your wages.
@MegaReddevil717 ай бұрын
Some have pcv in rocker cover
@DarkReaper-or9el7 ай бұрын
Ecoboost or ecoboom! Imagine the new 1.0 Turbo hybrid ecobooms those ford transits will be a nightmare
@themarvelousvlog7 ай бұрын
I am yet to do a wet belt. I might buy a dead engine just to play with it
@brianiswrong7 ай бұрын
Ford redesigned the ecoboost in 2020 (?) At least the ecoboost that had a wet timing belt, Back to a chain (atleast for the timing belt,not sure about the water pump) you can tell the difference by looking for the turbo. If its at the front it's a wet belt, if it's at the back it's a chain.
@stephenreed10807 ай бұрын
@themarvelousvlog they are crap to do. So much to take off, takes most of the day to do them and you need a 5x torque multipler for the crank bolt. The psa 1.2 turbo is a much easier wetbelt to do
@EZ-D-FIANT7 ай бұрын
Biggest mistake I made (within a week of going independent) was doing an ancillary belt on a Fiesta, I got distracted and left a ratchet on the crank when I did a test start, we all know what happened next 😅 Anyways yea anyone want any jobs doing i'm nice and cheap 🤣
@themarvelousvlog7 ай бұрын
That’s cringe hahah! Give you a shout for being cheap and cheerful haha!
@DrivenByGeorgeJexter7 ай бұрын
Hi, how do u check the timing ? Is it with a special tool that was in video? & how u re timing if needed? By loosening timing chain & using drill bit to correct holes & re fit ? Very curious…
@themarvelousvlog7 ай бұрын
Use the tools provided. To check timing. If timing is incorrect, refit the tools and check again
@DrivenByGeorgeJexter7 ай бұрын
@@themarvelousvlog thanks, might be silly question but do places like GFS & Euro car parts sell timing tools? Or online only?
@themarvelousvlog7 ай бұрын
@DrivenByGeorgeJexter they do, yes
@DrivenByGeorgeJexter7 ай бұрын
@@themarvelousvlog lovely
@andrewfox78617 ай бұрын
How are you locking the flywheel to torque up the pully?
@themarvelousvlog7 ай бұрын
Gunny the Milwaukee… I’m joking! You’ve got to use flywheel locking tool by removing the starter. That way you can torque the flywheel without turning the crank
@andrewfox78617 ай бұрын
@@themarvelousvlog 🤣 you can also get a flat blade in just above the os driveshaft small gap to the ring gear then get the gun on 💪🤣
@Dancy30077 ай бұрын
Vauxhall could be a failed pcv in rocker cover
@themarvelousvlog7 ай бұрын
Checked, all good on that end
@rtmetaldetectorillegal71596 ай бұрын
It is the pcv that is part off the roker cover
@Dancy30076 ай бұрын
Yes it is
@Gearhead907 ай бұрын
Try doing it on the wet belt setup utter fuckin nightmare mate lol
@themarvelousvlog7 ай бұрын
I am yet to do one. I’ve been avoiding them at all cost 😂 Might get myself an EcoBlue van to practice on
@ttatimbo58307 ай бұрын
@@themarvelousvlogtransit ecoblue quite a nice job - 1.0 litre eco boost are the nightmare ones. I too am yet to do one, but there are lots of videos about to help. One guy doesn’t use any special tools which is probably how I would do it, old fashioned painted timing marks and maybe the usual crank locking pin as long as you don’t have to loosen cam pulleys. Crank pulley bolt very very tight apparently!
@user-ry7xz9xq3z7 ай бұрын
Ford are hard car to work on their nice car to work on
@themarvelousvlog7 ай бұрын
They’re easy to work on, I can’t lie
@christopherwilson40037 ай бұрын
Ain't nothing wrong with DriveTec oil same spec as leading brands you're paying more for the Brand's name
@themarvelousvlog7 ай бұрын
A little background about me- I’m an aeronautical engineer who hates working in front of a desk all day, designing and calculating things, hence why I’m here chasing my passion and became a business man and a mechanic. One thing that I can say is that fluid dynamics (area that I focused on the most as a student) is very complicated and isn’t as simple as it seems. It may be true that you’re ALSO paying some for the name but just remember, meeting a specification is the BARE MINIMUM. Now, all the additives and extra liquid engineering that ‘expensive’ companies have done to stabilise the oil, I’d say, is superior compared to cheaper companies like drivetec. That being said, as long as you change your oil often, it should be fine but if you’re taking your service all the way to manufacturer’s recommended interval of 20,000mi (on some vehicles), I wouldn’t trust cheaper companies to last that long!
@jack.crv-R6 ай бұрын
@@themarvelousvlogthanks for clearing that up! Was wondering why you had sarcastic comments about the oil in the video! Just out of curiosity what oils would you recommend? I've heard Petronas syntium is a fairly good budget friendly oil.. and you'd like to think Petronas having formula 1 ties would be good... 🤷🏻♂️ I tend to buy Castrol but a lot of people have been making complaints about them recently..
@themarvelousvlog6 ай бұрын
@jack.crv-R I don’t think Petronas is the same as before. In my opinion, they have totally lost touch. Shell/Castrol/Mobile for me
@jack.crv-R6 ай бұрын
@@themarvelousvlog perfect! Thanks for the knowledge 👌 feel like I can take your word for it considering the message above with your background! Going to be doing an oil and coolant change myself next week so will carry on with the Castrol and not try the Petronas.
@ronniewilson65977 ай бұрын
👍🏻😀
@Hrossey2 ай бұрын
I’m looking to start a mobile mechanic repair network. My company is called “10 Incher”. We are a feminist company. Which is why women insist that only a 10 Incher can work on her vehicle. Our adverts were rejected on STV Midlands ✅ 😂
@phillipbrown89887 ай бұрын
Your “music” often overpowers your speech unfortunately