Your videos are awesome. I am a total beginner, I am a static modeler and I decided to purchase a traxxas 4x4 brushed to begin bashing into dynamic. Your videos are helpful and comprehensive even for an Italian like me. Thanks and keep up the good work

Awesome! Perfectly explained and to the point. Cool to see the paper trick works for large scale 👍

Awesome tips. Being an automotive tech I've got tools for things like this however they don't work for small scale vehicles lol. I actually just came in from bashing on my 1/16 e revo, flipped her s few times and actually heard the gear mesh change, apparently I've got an uneven spur gear and wore it out a bit. Oh well, time to dig into the parts box and do some replacing.

This was very helpful! Thank you sir

Thank you for helping me, this my first traxxas and the first time setting the gear mesh.

This was informative and something I didnt know about being a newb for some reason I this to be more complicated. But with your explanation it seems possible.thx for your time and concern.✌

Thanks man this helped a lot I was going to spend $30 to fix it. Then I saw your video and I was so happy

Great info vid. I wanted to point out that there are also 8mm size bore for gears as well.

Great video, thanks. Liked and subscribed.

Perfect this is exactly what I was looking for

thank you for the gear tip

thanks for the tips, just got my tamiya tt01e and it stripped the spur gear after it jammed then wheels up on my trousers while i switched it on configuring the controller decided to drill out the motor mount very slightly to get the closer adjustment to grip whats left of the gears got new gears in the post but will be 2 weeks working perfect now with my diff lock set up aswell so i know it works well

Excellent Video!

Thank you that helped a lot 👍

Great video!

Thank you😊

ditto exactly what i needed,you got my business

Very useful

Do you have a video about lipo batteries for beginners? I'm looking to get into the hobby would like to know the safe way of having lipo's before I make that step

Good man

Thanks.

great video i got a question what causes motor jitters ?

Hey could you do a video about breaking in a brushed motor? And talk about what it is

How do you manage the spring tension on the nitro spur? I have a bolt that compresses a spring for the slip clutch behind the spur. But my manual says nothing about tension or adjustments.

U need more subs bro

Cheers, picked up a secondhand drift rc that was absolutely destroying pinion and spur gears after 15 mins of figure 8's

I subscribed just for the opening.

My dr10 thanks you

Ive learned gears last longer going off of leaving no loose points at all ,, alot of times if you adjust to where theres is no binding at all its going to be too loose elsewhere on the gear i prefer looking for points where its too loose and getting it as close as possible if it causes binding elsewhere i just leave it otherwise ur stripping again off a hard launch on a 3s no loose points at all if it causes binding o well

How do you adjust the spring tension?

What gear do I use for a 72T spur diff??

Lol I set my mesh every time but 6s with a hobbywing system doesn’t play well with plastic spur gears

I have a Traxxas Stampede and the Spur Gear moves past the pinion gear to the right and car stops moving, I have tightened it back down, what would cause this, the motor moving?

Shit no wonder my Bandit was so loud after I put in 15 to 30 gear set up. I adjusted the mesh before the episode was over. Saved all my gears probably so a big Tanx to you sir.🏁🇺🇲🙏

I watch your videos all the time and when I watch I work on my rc car and I just got a ton of rc parts but I'm grounded so it's killing me

What car was featured in this video besides the stampede

hey I'm trying to find a RC car to build with the electronics

Thanks for this video, I just want to ask if it's okay to put a grease in pinion gear?

Do you know what the pinion /spur gear pitch is on a haiboxing protector (12815), also marketed as a bezgar 3?

I've tried to adjust my spur/pinion gears many times on my E-Revo 1/16 VXL, but no matter what I do I always end up having one side that's hard to turn and one that skips, it does a clacky grindy noise when I give a burst of throttle

Is this necessary for a new tc straight out the box?

Can a improperly set gear mesh creat a clicking sound when I press the throttel or when driving my traxxas bandit ?

I think I got my mesh right now but I think I’ll still have my constant battle of over and undergearing

is it also possible that the bore that goes inside the motor can wear out the hole cousing metal dust to form around the bolts and screws? i think this happened to me and i am not sure if i should drive it or not

if your pinion and spur gear are fully enclosed and both metal, should you grease them? Or still too risky incase some dirt gets in there?

My spur and pinion gear are covered so its hard to set them.. And the motor doesn't mount unless i put the cover on . oh boy

Me looking how to do it after I break it as always... :D I mean it's not entirely true, I got an RTR model, but I never checked for play in the gears... until now... when nearly the entire gear is flattened :/ :D

Hi MY Name is Troy Flanagan i have a 4s kraton with 2400kv motor with 2 mah 5000mah 14.8. 50c Battery And A 5000mah 14.8 100c from a smart spectrum Batterys i just. Watched ur video i found interesting information about the gears mesh and motor my problem my slipper Clutch keeps coming lose Now my gears are stripped and just got it out of shop 2 Days ago had to bring it Back into the THE ower had loosened the Engine so he could take it he had take out the red pole and pole under to get at slipper Clutch the problem was not the slipper Clutch was Already tight its was the gears at THE rear of the Truck they are plastic and look Cheap so my Question to you is should i get. Steel gears or Aluminum gears and tight motor so does not move and about slipper Clutch with plastic GEARS will plastic gears stripped faster then the steel 1s or Aluminum 1s And should i keep the slipper Really tight or a little bit looser i but Truck back in may stayed in the shop for 3 months Because manufactures did Not have the Right parts for and plus the Covid virus did Not help matters then when i got it back Ran Excellent for 7 days THEN slipper Clutch came lose again then back in Shop Again with stripped gears just frustrated with the Truck which is like New i don't Drive it hard do flipps or jumps with it just Drive it on a Diamond and grass when i turn it on i let it sit for 20 seconds before i Even move it check Everything over inside and out. Spray the wheels and Arms on the Truck front And back check All the bolts make sure Everything is tight including wheels Now it WON'T go ibackwards These TRUCKs. Have Trouble with slipper Clutch and gears please respond

Hello, I still strip gears after 10-15 laps, im a begginer, could crashing affect the spur gear stripping

i have done everything in the vid but my pinion keeps kicking fine dust is this normal

I have an issue, the pinion gear keeps slipping when I go full throttle. What can I do to solve this issue?

I have a 4s kraton with metal or plastic gears they are way at THE back of the Truck down at the bottom i have to loosen motor pull both poles off the red and slipper Clutch 1 then i can get at the metal or plastic spur there aer 2 which 1 is the plastic 1 and which 1 is the metal 1 and the gears are stripped the plastic 1s right underneath the back of Truck i have to take cover of to see looks like. A deep hole they are in like a bear cave there how much are they in Canada Dollars just iam from Toronto Ontario wondering how much r they in us Dollars

Second comment

My stampede makes whining sound but won’t go

I’m new to all this stuff but the paper method to me should be totally avoided unless you know what gram the paper is, as a printer there is way to many piece of paper to choose from just saying note book paper is a total grey areas as that could of been made out of any paper gram.

My motor wont move

It's going to last even longer if it's metal.

Wheres Rc Driver located?

My motor won't adjust

I can’t make the teeth touch because I can’t make the motor move

I can’t figure out for the life of me why my motor won’t slide back and forth on my slash 2wd even after loosening the motor screws the motor doesn’t want to move whatsoever

Why cant the gears be metal plastic its strong enough

can you remake this video with metal gears for my hsp

It funny how i just atripped my gears

Um nitros pinion gear is way bigger