Don’t swap Blazer rear disc brakes on ya Gbody until you watch this. SMH 🤦🏾♂️
Рет қаралды 5,134
7 ай бұрынIf you swap Blazer rear brakes to your GBody, you might need to do this.
I went to the Pick-n-Pull and got the rear disc brakes off a 2002 S10 Blazer. Installed on my 1986 LS1 Swapped Monte Carlo SS. If I can do it you can do it.
HOW MUCH DOES IT COST TO LS SWAP YOUR VEHICLE?
• 86 MONTE CARLOS SS: Ho...
KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED GBODY)
• KORE 3 BIG BRAKE UPGRA...
Parts list: 1998-2005 Chevy S10 Blazer 2WD
1. Rear calipers w/abutment brackets (used from salvage yard)
2. Rear parking brake assy (used from salvage yard)
3. Rotors and Pads (New)
4. Rear coilover relocation bracket (only needed if running coilovers in the rear)
5. Longer wheel studs. (my car is 12mmx1.5 studs, I used ARP part 100-7708)
6. Custom rear brake lines. ( you will have to adapt the rear hard line to a pair of rear soft brake lines running to the calipers. PENDING, I HAVEN'T DONE THIS YET
7. Adapter the G-Body Parking cable to work with the Blazer parking lever. (I purchased new Blazer rear parking cables, Haven't installed yet. I will make a video when I get them to work)
BMR Suspension COIL OVER CONV WITHOUT CA
Part Number: 142-CCK461H
www.jegs.com/i/BMR-Suspension...
ARP .509" Knurl Wheel Studs Most late GM (F-body, Vette)
Part Number: 070-100-7708
www.jegs.com/i/ARP/070/100-77...
Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035R
www.jegs.com/i/Dynamic-Fricti...
Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035L
www.jegs.com/i/Dynamic-Fricti...
R1 Concepts Optimum OE Brake Pads, 1997-2005 GM, Position: Rear
Part Number: 820-2551-0729-00
www.jegs.com/i/R1-Concepts/82...
Irish Marcelle Productions
Equipment used for production
iPhone 15 Pro Max (A Camera)
Rode Videomicro(shotgun mic)
Movo Edge RXD (wireless mic)
Movo wireless mini-up duo
iPad Pro 11inch
Blackmagic Cam (Camera App)
Lumafusion
Beats by: Crank Lucas
@87SSBOI 7 ай бұрын
Awwww man…I’m tuned in👀👀👀
@87SSBOI 7 ай бұрын
Great video man…we appreciate the heads up!! This is good to know before I get started on mine
@WarrenGBody 7 ай бұрын
Yeasir! Skip GTS Designs is my club brother. I believe I was there the day he recorded the vid. Peeps would ask how to do it and he said man imma make a real time vid from start to finish…He brought all the LS swaps, f body brake swaps and all that to the front. Before his vids, nothing was available. Clean ass work fammo!!🏆🤩🏆🤩🏆
@acollins9277 7 ай бұрын
MC is coming along well….👍🏾✊🏾
@lucky-Tx7 7 ай бұрын
Man LS! It's coming along really good!
@adammcdowell8620 3 күн бұрын
I have put 98 up blazer rear discs on g-bodies, chevelles, various other 10 and 12 bolt vehicles. I normally have to space the caliper bracket out a little bit on a few I've had to machine .020-.030" off the caliper bracket to get it centered just right..
@drprick7432 6 ай бұрын
Very educational. Thanks!
@Mr73cheyenne 6 ай бұрын
Very good and detailed information 👌🏾. I def sub'd
@willierebuildz9182 7 ай бұрын
Nice work 👍🏿👌🏿
@sherrodnelson3755 7 ай бұрын
😂😂😂 Milwaukee gloves and a green RYOBI impact. All good brother. Information will be used thanks.
@PENNYLS1 7 ай бұрын
Brand Names huh
@sherrodnelson3755 7 ай бұрын
😂😂😂 j/lk
@Powered_by_Genetics 6 ай бұрын
I'm glad I watched this. For my 87' Buick Regal-T, do I need to Buy/Install a Proportioning Valve for this Rear Disc Brake Upgrade? ✊🏽💯🤔👀
@PENNYLS1 6 ай бұрын
Yes, you will definitely need a disc to disc prop valve.
@South_Georgia_Cargo 7 ай бұрын
I tell you this one time, changing that proportioning valve is one of the worst things I've ever experienced.😅 That is all.
@PENNYLS1 7 ай бұрын
That part 👈🏾. Damn fasho
@perrystaggs4726 28 күн бұрын
Hello sir I just subscribed to your channel. I'm also doing a blazer disc break conversion on my mc ss and Im wondering where did you get the dust shield with the caliper bracket attached to it. I really can use your help
@PENNYLS1 28 күн бұрын
I got them from my local pick n pull
@Bball128 7 ай бұрын
Bro do you think that some c6 z06 4 pistons calipers would fit on these brackets
@PENNYLS1 7 ай бұрын
I’m not sure but I doubt it. I’m sure someone makes a bracket for that though
@mr.404atl2 7 ай бұрын
Can you run stock montecarlo rims with the blazer swap?
@PENNYLS1 7 ай бұрын
Yes The blazer brakes will clear the Monte Carlo 15” wheels.
@JF-sv7qo 5 ай бұрын
Part numbers on what you did not get at junk yard
@PENNYLS1 5 ай бұрын
Links are in the video description
@marcosponce4422 2 ай бұрын
Are these the camaro backing plates?
@PENNYLS1 2 ай бұрын
Blazer
@joraybeast2460 6 ай бұрын
Where did you get the proportioning valve from?
@PENNYLS1 6 ай бұрын
Amazon but you can get it from Summit Racing
@joraybeast2460 6 ай бұрын
U got a part number for it
@PENNYLS1 6 ай бұрын
@@joraybeast2460 labwork Performance Aluminum... www.amazon.com/dp/B0865SVHR4?ref=ppx_pop_mob_ap_share
@kingkennotv1973 7 ай бұрын
Did you have to add spacers to give the caliper and rim clearance?
@PENNYLS1 7 ай бұрын
No spacing was needed for wheel clearance.
@kingkennotv1973 7 ай бұрын
@@PENNYLS1 bro what!!! My original rims are touching the calipers. I also seen another video where someone used a spacer plate.
@kingkennotv1973 7 ай бұрын
@@PENNYLS1 what size are the rotors?
@PENNYLS1 7 ай бұрын
@@kingkennotv1973 the front brakes cleared my stock 15inch wheels. I have 17inch wheels. Not sure why the rear is rubbing if the front cleared.
@kingkennotv1973 7 ай бұрын
@@PENNYLS1 yeah it’s actually the front that’s rubbing. Idk why I tried to do 2x already. Idk but thanks though
Rob Dahm
Рет қаралды 340 М.
Tech Stuff
Рет қаралды 136 М.
КИНОТАЧ
Рет қаралды 800 М.
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 762 М.
Truck Drive
Рет қаралды 13 МЛН
Ikbalmotovlog 0786
Рет қаралды 3,8 МЛН