Don't throw away old car spark plugs, they are very useful!

Рет қаралды 132,016

4 ай бұрын

Hi guys, while tidying up I found several spark plugs for cars and I remembered a method that is always useful for increasing the thickness of a sheet metal, when the thickness does not allow making threads.
There are actually several methods, this is simply the most economical and versatile for hobby enthusiasts!
I hope you enjoyed the video, subscribe to the channel and like!
THANK YOU

Пікірлер: 30

@dagorithe 4 ай бұрын

Great idea for thin materials. What I didn’t get from the video were the sizes. I am assuming that the diameter of the ceramic portion of the spark plug is the tap size for the bolt to be used. But what drill size did you use prior to the spark plug? Thanks for the idea.

@newtech5042 4 ай бұрын

Hello, thank you... To make a good hole with this method, you need to drill first with a smaller tip! I'll give you an example, if you want to drill 6 mm with the spark plug, it is advisable to drill with a 3-4 mm bit, if you want to drill 12 mm, a 7 mm bit is enough.

@brianclark17 2 ай бұрын

Should have shown the same material with various wall thicknesses l! It might be a good idea, however, I'll stick with Riv Nuts.... Takes a lot less time!

@enricotosco 4 ай бұрын

Processo affascinante mi è sempre piaciuto, ti consiglio di usare i maschi a deformazione non ad asportazione, esistono anche dei bulloni passo metrico autoformanti molto resistenti. BUON anno!

@newtech5042 4 ай бұрын

Ciao, ti ringrazio per il commento, effettivamente hai ragione... di sicuro la deformazione permette l'incrudimento del materiale quindi maggiore resistenza! Buon anno anche a te!

@Wurjiyanto Ай бұрын

❤❤❤❤❤❤

@DaveEtchells 2 ай бұрын

As soon as I saw what you were doing, I thought “aha, an alternative to Riv-Nuts!”

@newtech5042 2 ай бұрын

Riv nuts have the advantage of being practical and fast... In the video I showed an alternative that I use when it is not possible to use other techniques!

@DaveEtchells 2 ай бұрын

@@newtech5042 Yeah, for sure not as practical as Riv-Nuts, but I’m fascinated by all this friction-working stuff in a home shop. I’d always just thought of it as an extreme industrial process, but now I see it’s possible to use on a small scale as well 👍

@TheBro640 4 ай бұрын

Это, лайк!

@wonnozline4094 4 ай бұрын

Spettacolo!!!! Grazie!

@alexvozzhaev5030 2 ай бұрын

250 полуляхов! Для резьбы непригодно, стенка тонкая.

@JoseGarcia-pz1eh Ай бұрын

Ósea que tengo que comprar un torno, necesitamos ideas buenas y simples sin tanto recobeco

@Massimo68ac 4 ай бұрын

👍👍✌✌😎😎buon 2024

@newtech5042 4 ай бұрын

Grazie, anche a te!

@user-rs3ol5dr9d 2 ай бұрын

Для нарезки резьбы лучше всего использовать Метчик-раскатник

@claudiovandoni7878 4 ай бұрын

Molto interessante Bravissimo

@williamching8247 26 күн бұрын

Es una perdida de tiempo?

@jcalvet 4 ай бұрын

Que bien, hay que comprar un torno para poder aprovechar unas bujías viejas, pues... vaya ahorro.

@jankarolczak9668 4 ай бұрын

Na szczęście mówię po włosku dość dobrze, w innym wypadku to tylko niemy film z technicznego punktu widzenia.

@alexthomas6865 4 ай бұрын

Beh, in realtà New Tech ha messo i sottotitoli anche in Polacco...

@MrVietha 4 ай бұрын

Máy tiện gì đấy a zai

@newtech5042 4 ай бұрын

Colchester Triumph 2000

@miguelalarcon3369 Ай бұрын

Que utilidad tiene eso?

@alexthomas6865 Ай бұрын

In realtà è un tipo di lavorazione che viene utilizzato molto nei processi di produzione. Viene utilizzato quando non è possibile utilizzare i Rivnut! Newtech ha trovato un metodo economico per fare queste lavorazioni... le punte ad attrito costano abbastanza!