Don’t Waste Shop Space | Under Table Saw Cabinet Build

No video

Don’t Waste Shop Space | Under Table Saw Cabinet Build

Рет қаралды 43,233

Күн бұрын

Building a custom cabinet to fit under the wing of a table saw.
Table Saw Cabinet Build Plans - www.johnbuilds...
Check out all my other plans! - www.johnbuilds...
JH Circular saw shaped push sticks - www.johnbuilds...
Follow on Instagram: @johnbuildsit / johnbuildsit
Facebook: / johnbuildsit
TikTok: tiktok.com/@johnbuildsit
All tools/products Used:
4’x8’ Bora Centipede Work Table - amzn.to/3uN1h11
2.5" Castors - amzn.to/3SKrueY
Drawer Pulls - amzn.to/47CGXSv
22" Drawer Slides - amzn.to/3G5IlBC
Freud 10" Ultimate Plywood Blade - amzn.to/47y2Q69
Freud 1/4" Spiral Downcut Bit - amzn.to/3QIqrtA
JessEm Table Saw Stock Guides - amzn.to/40JypHm
JessEm Miter Gauge - amzn.to/3uuxaj2
Awl Tool - amzn.to/3gtdS7k
Kreg Setup Bars - amzn.to/46kTrgs
Glu-Bot Bottle - amzn.to/49FRrlU
Plastic Shims/Spacers- amzn.to/3sDSySu
Isotunes Hearing Protection - amzn.to/3znbIeQ
Flush Cut Edge banding End Trimmers - amzn.to/358dTI5
Kreg MultiMark Measuring Tool - amzn.to/33yioF0
Kreg K5 Pocket Hole Jig - amzn.to/35nH7T3
Kreg Right Angle Clamp - amzn.to/3JUoPrn
Cabinet Hardware Jig - amzn.to/355Jlqy
Milwaukee 18g Brad Nailer - homedepot.sjv.io/A4Lkx
Dustopper Dust Separator - homedepot.sjv.io/0J2zVO
Milwaukee M12 Fuel Hammer Drill & Impact gun - homedepot.sjv.... or amzn.to/2OWb4h9
Bessey F Style Clamps 6" & 12" - amzn.to/3AZNYzd
Bessey 50” Parallel Clamp - homedepot.sjv....
Bessey 24” Parallel Clamp - homedepot.sjv....
Bessey 1/2” Pipe Clamp - amzn.to/2sn5soq or homedepot.sjv....
Bessey 3/4" Pipe Clamp - amzn.to/34csCkZ
Delta Cruzer Miter Saw - amzn.to/3VJH2hW
Delta Dust Collector - amzn.to/3ApNy4L or homedepot.sjv....
*As a Home Depot and Amazon affiliate I may earn from qualifying purchases made through links on this post.

Пікірлер: 171

@markcogan9002 9 ай бұрын

I vote yes to a cross-cut sled build video.

@cromakey 9 ай бұрын

Nice build, I'd love to see your take on the crosscut sled.

@bradleytuckwell4881 4 ай бұрын

I got on KZfaq to find a great design for a table saw cabinet yours was the first one that came up and it’s perfect. Well worth a sub so thanks for posting

@JohnBuildsIt 4 ай бұрын

Awesome! I appreciate it!

@69kaveman 9 ай бұрын

Great work! Yes to the crosscut sled video.

@JohnBuildsIt 9 ай бұрын

Ok probably coming up soon!

@allenricafrentesr9584 2 ай бұрын

Hi John , love your build videos very informative. Clean work and straight to the point. I recently purchased couple of your plans. Soon as I have some extra time I’ll start working on them. Thanks and yes I would like to see you build a new cross cut sled!

@JohnBuildsIt 2 ай бұрын

Thank you I appreciate it!!

@billymartens7732 9 ай бұрын

Yes for the cross cut sled

@larryo1606 8 ай бұрын

Thank you! Bought the plans, built the cabinet with my son. Came out perfect ! First time using edge banding. Didn’t have the trimmer so I used a flush trim bit on my trim router Fits with room to add a 2 1/2 tray on top under my Grizzly table saw.

@JohnBuildsIt 7 ай бұрын

Awesome!!

@lt41385 6 ай бұрын

Yes, please on the cross-cut sled video as well! Really appreciate your videos!!

@davidmagner8397 8 ай бұрын

The nice design that takes advantage of the otherwise wasted space. I have the 52” extension so I might modify it slightly but will definitely use your plans.

@pwisc2115 9 ай бұрын

Beautiful simple solution. Totally want to see your cross cut sled. I still mind blowing with your portable miter saw station with that awesome Milwaukee saw.

@scotter_dotter 9 ай бұрын

Looks great

@JohnBuildsIt 9 ай бұрын

Thanks man!

@jewdd1989 9 ай бұрын

Do a cross cut sled, any shop builds especially useful jigs to storage and cabinets, organization…. More pls! Happy to be here watching always

@JohnBuildsIt 9 ай бұрын

Will do, thanks!!

@GooseWoodworking 8 ай бұрын

Nice build and video. Bought the plans. It doesnt appear to factor in the mobile base, though you do have it in the video. It seems you definitely have to move the legs out further than the last factory position on the Sawstop to fit it with the mobile base.

@JohnBuildsIt 8 ай бұрын

Right 👍🏽 I said in the video I moved the legs out further

@g.efaber482 9 ай бұрын

This is great! I really like the simplicity and clean look. Thanks, John.

@JohnBuildsIt 9 ай бұрын

Thanks for watching!!

@russellwintersteen5635 9 ай бұрын

I like the storage idea. I wanna make something similar when my new saw shows up. Gonna try something similar with my out feed table. Big space saver ideas. Love it

@JohnBuildsIt 9 ай бұрын

Thanks for watching!

@taylorscott9605 9 ай бұрын

Great job!

@JohnBuildsIt 9 ай бұрын

Thanks!!

@JenkinsB 9 ай бұрын

Killer vid. Such a clean process from initial cuts to carcass assembly to drawers. Yes for the cross cut sled!

@JohnBuildsIt 9 ай бұрын

I appreciate it!

@steveserwecki7415 9 ай бұрын

Nice build! I just purchased the plans. I have the same SawStop. Now I have the right space to store my crosscut sled, etc. I’ve also purchased other plans from you, they’re easy to follow, and accurate! Thanks for all your hard work!!!

@JohnBuildsIt 9 ай бұрын

Thank you I appreciate it!!

@MaddMaxxWoodWorks 2 ай бұрын

Great job

@JohnBuildsIt 2 ай бұрын

Thank you!!

@obiwuncanoly 9 ай бұрын

That's an awesome storage cabinet for your table saw. Thank you for sharing the build with us.

@ThatGeekyMaker 9 ай бұрын

Nice job, good use of the space. I used that space under my saw to put my surface planer.

@frijoli9579 9 ай бұрын

That was a cool build!

@JohnBuildsIt 9 ай бұрын

Thank you!

@adamkirkland4348 9 ай бұрын

Great video. First one I’ve seen from you. Would love to see cross cut sled vid.

@JohnBuildsIt 9 ай бұрын

Thanks for watching!!

@kohenjoiner5318 8 ай бұрын

Looking forward to the new crosscut sled vid! I always take away something essential from your vids. Many thanks, John.

@JohnBuildsIt 8 ай бұрын

Thanks for watching!!

@stevecox552 9 ай бұрын

great video,,, yes on eh cross cut sled vid,,,, keep up the great work.

@LittleShadowWoodcraft 8 ай бұрын

You had me at the blade storage.... and sold me on the cross cut sled storage. Great build video. Glad I stumbled on your channel!

@JohnBuildsIt 8 ай бұрын

Thank you!!

@19woodworks 9 ай бұрын

Nice. Pretty simple but very good looking! And yes, id love to see a cross cut sled video!

@josh_watson 9 ай бұрын

Great video. I just recently upgraded to my first Harvey Cabinet Saw, so I'm working on plans for under-table storage like this and I also need to build a crosscut sled. So yes, a video for that would be great. Thanks!

@JohnBuildsIt 9 ай бұрын

Awesome man!

@amynoble3269 9 ай бұрын

Great video. Yes I would like to see a cross cut sled build.

@shanaproctor100 9 ай бұрын

Great build! I really enjoy seeing how you organize all the individual tools in your shop.

@JohnBuildsIt 9 ай бұрын

Thank you!!

@jillcarr-hilton7308 6 ай бұрын

Great videos! I’m going to be building out my first real wood shop later this year (so exciting!) and have been binge watching a ton of videos on shop storage/benches/tables etc. Your builds are some of the best I’ve seen, looking forward to giving them go.

@JohnBuildsIt 6 ай бұрын

Nice! Thank you!!

@makermark67 9 ай бұрын

Another great build, John. I've been over thinking trying to build something and this is a perfect solution and hopefully will get me out of the pralysis by analysis spot i'm stuck in. Thanks for this. Hope you and your family has a great Thanksgiving!

@JohnBuildsIt 9 ай бұрын

Thank you, happy thanksgiving!

@dangkolache 9 ай бұрын

I love your work man, you're a big inspiration for me. I have a nice 600sqft shop that is a total mess and I look to your projects for all kinds of ideas on storage and efficiency. Keep it up brother.

@JohnBuildsIt 9 ай бұрын

Thanks for watching i appreciate it!

@jimrosson6702 9 ай бұрын

Absolutely great job. It turned out great

@propatriabellum 9 ай бұрын

Nice!

@Texas_Rigged 8 ай бұрын

Hell yea I want to see a crosscut video

@E71T8 7 ай бұрын

Nice job

@JohnBuildsIt 7 ай бұрын

Thanks!

@philshock3805 9 ай бұрын

Great work as usual, John. I have the same saw and built a (very), similar cabinet a few years ago loosely based on Brad's design from Fix This Build That. I did remove the front leg but didn't lose stability in the least. I made an adjustable support piece that fits between the top of the cabinet and the underside of the table extension. It's just a block fitted with a threaded insert combined with a leveling foot but it works great. I don't miss the leg in the least. I used recycled oak plywood given to me by a co-worker (previously built-in cabs), with a gross dark stain so yours certainly looks better but hey ... free! :) Really appreciate what you do.

@JohnBuildsIt 9 ай бұрын

Yep the block in between the cabinet and saw is must have and great solution too! 👍🏽

@mattmorrisson9607 8 ай бұрын

Nice and clean, John. I like it!

@stelioskantos7765 9 ай бұрын

Awesome

@isaaczeitoun7767 8 ай бұрын

Great video!. I'd love to see your new sled build!

@StanCrafted 9 ай бұрын

Great video...might build one myself...though I think I will switch the side the blade storage and sled holder are on. Well done!

@JNewellworks 9 ай бұрын

Awesome work John I love how meticulous you are with your woodworking it is very inspiring. Thanks for sharing and keep up the great content.

@JohnBuildsIt 9 ай бұрын

Thanks I appreciate that!!

@wirelad1 9 ай бұрын

WOW John... You made that look real simple and exactly what I need. I have Laguna Fusion 3 but I'm sure the table saw dust exhaust comes out that side. Thanks away John. and yeah I'd be up for watching a new crosscut sled. I'm all new to this so simple is good! So far I've made approx £300 kindling 🔥

@davem4256 9 ай бұрын

Great project John, I’ll be looking towards building one for my52” saw stop. Thanks for sharing, it would be great to see your sled build.

@JohnBuildsIt 9 ай бұрын

Thank you!!

@thecarpenter1979 8 ай бұрын

Great video. I like the lack of annoying animations and crappy music. Definately enjoy the music you're listening to. Who you listening to lately?

@JohnBuildsIt 8 ай бұрын

I’m pretty much just always listening to podcasts while working

@DavidMcCabe 9 ай бұрын

Looks great! A crosscut sled video would be cool too!😊

@billybike57 9 ай бұрын

Numbers do matter! Awesome job!

@JohnBuildsIt 9 ай бұрын

Thank you!

@billm4560 9 ай бұрын

Another nice build John! 👍🏻 Can’t wait to see what you come up with on a new sled! I have one but been thinking about making a new! 😊 Thank you for sharing!

@JohnBuildsIt 9 ай бұрын

Thank you!

@rfdinesen4027 8 ай бұрын

Great video, execution and really nice design too. Very flexible.

@JohnBuildsIt 8 ай бұрын

Thank you!!

@patniemczyk8860 9 ай бұрын

Yes on new crosscut sled. Great video Jon

@JohnBuildsIt 9 ай бұрын

Thank you!

@1975oldschool 9 ай бұрын

Good build man! I especially like the blade spacers

@dustinclark8946 9 ай бұрын

looks pretty good!

@OrganizeCreateDecorate 9 ай бұрын

This is a sharp cabinet!

@JohnBuildsIt 9 ай бұрын

🙌🏼🙌🏼

@dpmeyer4867 9 ай бұрын

Nice

@taylorhopson9740 9 ай бұрын

Looks great!

@MikeGusFifteen 9 ай бұрын

Beautiful work! I need to make one for my saw for sure.

@JohnBuildsIt 9 ай бұрын

Thank you!!

@pdxgigi720 9 ай бұрын

I wish i had your plans a year ago when I built mine for two reasons. I thought I needed two slide outs so while my cabinet looks great it is slightly too big for my Sawstop. And I dont use the 2nd one. Lastly, l ended up storing my sled in the same place where yours is, but I ended uo just building a short mdf box and setting it on the floor. Your plans look way neater and fit perfectly.

@JohnBuildsIt 9 ай бұрын

Ah bummer! Sorry for procrastinating getting this done haha

@robb9079 9 ай бұрын

Another awesome video! Getting ready to build something very similar, I also need to build a cross cut sled, so bring it on!!!

@ronkort8927 9 ай бұрын

Nice job!

@DGALVIN45 9 ай бұрын

Clean brother 💯

@Jaypark1113 9 ай бұрын

Thanks for the video. I got several good ideas for building mine.

@JohnBuildsIt 9 ай бұрын

Awesome thanks for watching!

@jonruba4065 9 ай бұрын

Yes. Video on crosscut sled

@billhardy9697 8 ай бұрын

I would like to see a sliding sled build video. Thank you!

@guybowers9094 9 ай бұрын

Another great video John and a very nice cabinet. I give you the thumbs up on a crosscut sled video. Hope you and your family had a blessed Thanksgiving

@philkidd 9 ай бұрын

This is freaking awesome John! I have an older Delta Unisaw with a 52” right side support table that all sits on a mobile base, so I don’t have the ability to utilize this design, but I am inspired to build a drawer box that would fit within that space. I absolutely love all your shop builds as they are super clean and efficient. Thank you for the inspiration and keep it up. Oh and for sure, if you decide to make a new sled, that would be a great video as well I am sure.

@JohnBuildsIt 9 ай бұрын

Thanks man!!

@raulsoto2088 9 ай бұрын

Muy bueno... Te felicito... Un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

@suearmstrong3404 9 ай бұрын

Awesome! Love it!!

@JohnBuildsIt 9 ай бұрын

🙌🏼🙌🏼

@user-qz2qu2hp2i 9 ай бұрын

I would like to see the new cross cut sled.

@Ch3micalSoup 9 ай бұрын

I need to build this next! Great video , thanks!

@JohnBuildsIt 9 ай бұрын

I appreciate it!

@shaun30-3-mg9zs 9 ай бұрын

Hi John, Great build handy for any workbench look's good in the workshop, great video Regards from Wrexham, Wales👍

@JohnBuildsIt 9 ай бұрын

Thank you!!

@edwinpagan1290 9 ай бұрын

Excelent Vídeo

@jdlarson1 9 ай бұрын

Great job, really enjoyed the video. Keep up the great work.

@JohnBuildsIt 9 ай бұрын

Thank you!

@generalsworkshop 9 ай бұрын

Great job, appreciate your contact, thank you and keep it coming.

@JohnBuildsIt 9 ай бұрын

Thank you!!

@johnhester8394 9 ай бұрын

Great build as usual!

@JohnBuildsIt 9 ай бұрын

Thanks!!

@350Zamir 9 ай бұрын

Great video! I would def cut the music out though. Love hearing just natural woodworking sounds

@JohnBuildsIt 9 ай бұрын

Shop is right next to a busy highway unfortunately. No music would then just be road noise

@350Zamir 9 ай бұрын

@@JohnBuildsIt oh that sucks! Anyway I subbed! Keep uploading!

@empoweryou1 9 ай бұрын

Love it, great build!

@JohnBuildsIt 9 ай бұрын

Thank you!

@TheBillPayingHobbyists 9 ай бұрын

Excellent build. Kitchen quality cabinet there, nice work. Thanks for sharing. Subscribed!

@JohnBuildsIt 9 ай бұрын

Thank you!!

@CustomCutsByChris 9 ай бұрын

Nice build, John! I have the same saw and need to do something similar. Just subscribed to your channel too, looking forward for to watching more.

@JohnBuildsIt 9 ай бұрын

Thank you!!

@williamkennedy1149 9 ай бұрын

Yes on the sled. Maybe not fast forward so much

@mellymel1100 9 ай бұрын

Great build! :D Saving to favs.

@markraisner9000 9 ай бұрын

I aways enjoy your videos.

@JohnBuildsIt 9 ай бұрын

Thanks Mark!

@kellyscott5611 9 ай бұрын

Great use of space!

@JohnBuildsIt 9 ай бұрын

👌🏽👌🏽

@stevexbishop 9 ай бұрын

John, your Mitre Gauge seems real close to your Sawstop Blade, do you cut a lot with the Sawstop Sensor Turned off? Nice vid, I’m liking the look of your shop. Steve

@JohnBuildsIt 9 ай бұрын

No I don’t turn it off. Probably just the camera angle 👍🏽 it’s not that close

@offairhead 9 ай бұрын

❤

@EricStrobel09 9 ай бұрын

Looks great brotha! What miter guage is that for your table saw

@JohnBuildsIt 9 ай бұрын

It’s the JessEm

@rickfarris5071 6 ай бұрын

Hi John, I have the same saw as yours, can you give me details how you relocated the support legs to make room for the cabinet? I purchased your plan recently, thanks......

@JohnBuildsIt 6 ай бұрын

Just unbolted and moved them all the way to the right. To reattach I just screwed them into the wood frame of the wing

@jasonplugowsky3086 8 ай бұрын

Could you tell us what tool you were using to trim the WIDTH of the edge banding? I think you forgot to list that. I've never seen one but it looks way quicker than a flush bit.

@JohnBuildsIt 8 ай бұрын

Called the Band-it edge trimmer. Couldn’t find it on Amazon. I got it at Menards

@jasonplugowsky3086 8 ай бұрын

@@JohnBuildsIt Appreciate your time!

@aircrow50 9 ай бұрын

Show the new cross-slide build.

@JohnBuildsIt 9 ай бұрын

I’ll plan on it 👍🏽

@Erickingarthur 5 ай бұрын

Great video John. I bought the plans and have the same saw. My one question is how you moved the extension wing legs? Did you pull the front rail off and re-drill the holes for the bracket? Thanks

@JohnBuildsIt 5 ай бұрын

I used the ball end hex that came with the saw to loosen that bolt without needing to remove the rail. To reattach all I’ve done so far is just screw it into the wood top from the inside

@Erickingarthur 5 ай бұрын

Great. Thanks for the info.

@stevetimmons1284 8 ай бұрын

What brand/model is the fence and accessories on your table saw?

@JohnBuildsIt 8 ай бұрын

That’s the stock fence that comes with the saw. All the other accessories are linked in the video description 👍🏽

@taylorwebster1990 2 ай бұрын

How did you get the legs of your Sawstop moved out that far? I don’t have any more mounting holes to be able to move as far over as your did.

@JohnBuildsIt Ай бұрын

To reattach I just screwed it into the wood wing on the inside

@RaptureResins 3 ай бұрын

Great vid and considering buying the plans. Question...do you have any discomfort using the saw in just the industrial base? It's much lower than my Ridgid (just got the 36" sawstop). So if I'm able to raise my sawstop by 1.5" between the base and bottom of the saw...A) think that's a secure idea? And B) will that change the plans for me specifically?

@JohnBuildsIt 3 ай бұрын

I’ve grown to like the height, comfortable to use! I have seen guys raise theirs like you’re saying though, shouldn’t be a problem 👍🏽

@kevinthomson6324 9 ай бұрын

If I build this then where am I supposed to kick my vacuum, extra hoses, extension cords, cardboard boxes and what ever other crap that was in my way and I kicked under there. This is on my project want to do list with the boom arm for my dust hose and a French cleat wall. Someday I’ll get to it.

@JohnBuildsIt 9 ай бұрын

😂😂I hear that

@chuckgrumble5440 Ай бұрын

sad thing is it is cheaper to get packout boxes than buy the wood and slides (

@JohnBuildsIt Ай бұрын

Haha probably!

@jcarlin 9 ай бұрын

How did you move the table saw legs? Looks like you’d have two drill new holes in the steel and maybe even countersink them for really huge pan head hex bolts?

@JohnBuildsIt 9 ай бұрын

The same way it’s attached in the factory spot

@jcarlin 9 ай бұрын

@@JohnBuildsIt Maybe your wing has some holes mine is missing…

@JohnBuildsIt 9 ай бұрын

@@jcarlin no sorry I drilled a new hole on the front! Really don’t have to though. Just fastening it into the wood on the wing would be plenty

@jcarlin 9 ай бұрын

@@JohnBuildsIt Did you remove the fence rail to drill the new holes?

@JohnBuildsIt 9 ай бұрын

@@jcarlin no just went down in the space between the square tube and the angle iron