In this video I take a look at the Double Bell (DBoys) GP-25 under-barrel grenade launcher for AK style airsoft guns.
Пікірлер: 49
@THECHRISTRAIN Жыл бұрын
Great review! I've been on the fence about it, but now I plan on getting one! Looks great on your AK!
@Historyrevenge7773 жыл бұрын
Great review mine comes today can't wait 😁
@West_Coast_Gang2 жыл бұрын
This is the best review yet
@mudy74712 жыл бұрын
Wonderfull review, i ordered it for my LCT ak74n and i also think it just looks so dope on an ak.
@cavscout71132 жыл бұрын
Just bought the gelblaster version here in Oz - thanks for the vid showing how to fit it and load it as it came with no instructions or manual whatsoever.
@hamer5544 жыл бұрын
Can you confirm that the shell locking mechanism with magnet is better and not prone to breaking as opposed to dboys gp25, which broke after 100 shots?
@nickgautrey26162 жыл бұрын
A quick note the grenade is held in with a small latch inside not magnets.
@tk-5764 Жыл бұрын
Do we know if the casting of the TM ZET AKM will work with it?
@jeremyali37833 жыл бұрын
Do you know if it would work with red gas, black gas or Co2?
@barrywalsh64084 жыл бұрын
Thank you, this is a great and informative video that is straight to the point. May i ask how much the grenade launcher costs and where i can get it?
@joescustomairsoft2724 жыл бұрын
Thanks for the comment! I bought this one from Taiwangun, it cost me £106 including shipping
@parallel-knight2 жыл бұрын
YO does anyone know if the K-55A version they do is able to separate from the bit of pic rail it comes with?
@LynchE1 Жыл бұрын
Could you use taginn rounds ?
@MaLva500 Жыл бұрын
I've noticed the spring inside the grenade is far too stiff to fire when it has green gas inside. Anytime I've looked for a fix nothing is available as a guide
@rotinpiss70476 ай бұрын
Is this compatible with the Arcturus ak-12
@MegaMusikMan3 жыл бұрын
anyone know what AKs it fits on. i have a CM.076 and im wondering if it will fit.
@zimmmerit6308 Жыл бұрын
Can you help? I bought E&l AK and Double Bell launcher and it not fits fully (( the launcher goes off without clicking off button
@chrislagunas200010 ай бұрын
Sadly, this kinda has a compatibility issue with my Cyma Ak74, but zip ties work on it and attach to the gas block. Well, it just doesn't slide back all the way
@Kyddosuperstar4 жыл бұрын
The bbs has a nasty tendancy to roll out of the insert holes. feel like it needs a thin o ring in the front to add resistance before firing
@SquidersGaming3 жыл бұрын
Use cigarette filters on the end of the holes, works a treat
@MaLva5002 жыл бұрын
My main problem is the trigger jams or it's the gas grenade refusing to launch bbs due to trigger
@edkillick4450 Жыл бұрын
Does this fit dboyz ak?
@frostylia19822 жыл бұрын
mine not shooting!!!the spring inside the shell is tooo stiff and when you press the triggr there not enough force to sqeez that back plate of the shell to let the gas release the bbs
@grimreaperairsoft14862 жыл бұрын
Would this fit on a Aks-74u? I'm thinking about buying one and was curious
@sergeantsalad18832 жыл бұрын
Since the aku has a different hand guard and no rod on the bottom of the barrel it is not possible to fit a gp-25 on it, sorry
@Tower.. Жыл бұрын
If you attatch it on the handguard with ducttape... then yeah.
@Silver55 Жыл бұрын
hey man u got any clue if it will fit a ARCTURUS Ak12k?
@rotinpiss70476 ай бұрын
Did u find out?
@Silver556 ай бұрын
@@rotinpiss7047 yeah i did u it dose fit but u gotta take off the flash hider, U can still put the flash hider on after but it would be lose on the threadS
@DjSleeb3 жыл бұрын
May I ask which jacket/sweater that is? Looks really nice :D
@cornishpasty7853 Жыл бұрын
does anyone else have a problem with it falling off at the handguard? is this because I'm missing the rod that goes under the barrel? also is there a way to stop the BBs from falling out of the grenade when its angled downwards?
@chechenarchive Жыл бұрын
Yeah, I also have an issue with it being loose on my handguard. Makes it very impractical.
@cornishpasty7853 Жыл бұрын
@@chechenarchive some people I asked said it was the same on the real one, however I am getting a new AK soon with a smaller lower handguard which might fix the problem
@chechenarchive Жыл бұрын
@@cornishpasty7853 Let me know how it works out for you, yeah?
@cornishpasty7853 Жыл бұрын
@@chechenarchive I just figured it out: when you feel it click on it not actually on all the way. You have to push down really hard from the barrel and it will move slightly. Then it shouldn't move.
@chechenarchive Жыл бұрын
@@cornishpasty7853 I had tried and tried for a long while; zero luck still. I will give it another shot, but I couldn't get it to click in place anymore.
@nilla123wafer3 жыл бұрын
Where do you find these? They are out of stock everywhere
@frostylia19823 жыл бұрын
Taiwan gun has in stock
@parallel-knight2 жыл бұрын
Is anyone selling one if these in the UK. I’ve been looking to get one for months on end of someone would do me the honour and blessing of selling me one that would be amazing. If you want to sell it with the AK. I am looking for a AK-74 type ak so I would be interested in the package. I’m willing to spend £100 for launcher and £250 for GP-25 and AK-74 type.
@xMiStErJoKeR4 жыл бұрын
It can't go on cm050?
@joescustomairsoft2724 жыл бұрын
You would need to replace the hand guard with a regular AKM style one (as the fore grip will be in the way of the launcher)
@SquidersGaming3 жыл бұрын
Am i the only one struggling to get it on a lct akm or ak74mn ?😅 watching videos how to attach it but no luck
@valentin18552 жыл бұрын
@@joescustomairsoft272B
@Tower.. Жыл бұрын
@@valentin1855 B
@gestdood55473 жыл бұрын
just shopping for my Ukrainian kit thanks for the help
@justananomaly Жыл бұрын
Glory to Ukraine, amigo. Doing the same exact thing.