This is a PCB repair for Romain from the youtube channel "Mod In France". The board suffers from issues with the background graphics.Previous repair attempts failed. Let's see what we can do. Enjoy!
Пікірлер: 31
@Mod_In_France5 жыл бұрын
Hey Doc, thanks so much for fixing my board. I spent a lot of time troubleshooting it but I got lost in the rabbit hole at some point. Your idea to keep the background frozen for more reliable test was incredibly smart. When I tested the ram input, I must have seen it pulsed and told myself it was OK. Anyway, fantastic work as always. Un très grand merci !
@azariayehezkel90645 жыл бұрын
Im also happy for you
@christophzett5 жыл бұрын
Thank you very much, glad I could help, have fun with the game!
@christophzett4 жыл бұрын
...if I may say so I would really appreciate some sort of honorable mention on your channel if you are happy with the repair job - thank you!!!!
@Mod_In_France4 жыл бұрын
@@christophzett will do :-)
@1978258603 жыл бұрын
After watching those wonderful videos repairing Arcade PCB Boards from expert Doktorzett, and how explain in details I was able to fix my two non working DD, they were sitting in my shelf for more than 10 years, and now i am very happy. Please make more videos repairing arcade PCB, you are a great contributor to Arcade community many thanks
@hashknight15 жыл бұрын
nice job. you saved the board. you saved our childhood memories.
@azariayehezkel90645 жыл бұрын
Welcome back dok
@christophzett5 жыл бұрын
Thank you! Enjoy the vid!
@troxel73685 жыл бұрын
Heck yeah, another video! Thanks for taking the time and doing these. I love working on Double Dragon boards.
@freeyourinnertube4 жыл бұрын
Watched all your videos in the last week - thanks for posting. Very interesting, informative and educational. Reliving my miss-spent youth through your videos - might even give this a go myself. Danke
@nightbirdds5 жыл бұрын
Welcome back! Nice work, as usual. Faulty RAM chips seem to be fairly common with old arcade boards. Luckily that's all this one was. The cool part, though, is the diagnostic steps and the results at each step. That's why I like these videos so much. I see a lot of "So I did this thing, then that thing." explanations on other videos, but without showing the steps themselves. I think your approach is much better.
@christophzett5 жыл бұрын
Thank you! And yes, you are right, the ram chips are one pretty common problem on the double dragons, also the prom chips seem to be problematic often, I think because they tend to get very hot. But you also see eprom failiures, failiure of regular ttl "glue" chips and well as with all boards corrosion related and physical damage related issues. So I think that still every repairt I start is an interesting project and I have to admit that I do have another board on the bench with I worked on for a long time and I actually don't seem to be able to figure it out. Challenging!
@trentjackson48163 жыл бұрын
The problems with these boards is usually bad ram and buffers. 90-percent of those 16-pin DIPs on these arcade boards are buffers. 5☆ video friend. I might buy a huge box of faulty but complete boards soon. I have a lab at a factory unit where I can do all these repairs. I have plenty of buffer ICs 74HC and 74LS etc... but I needs to get some old RAM chips. Anyone have a generic list they want to share for RAM chips used on boards say 1981 - 1988? I am chasing boards between 81 and 88. Love that vintage of game.
@Maxxarcade5 жыл бұрын
Do you know where I could find schematics for an Aero Fighters PCB? I have two of them that need repair, and haven't been able to find schematics anywhere.
@azariayehezkel90645 жыл бұрын
Nice work We wait to next video
@christophzett5 жыл бұрын
I am trying to upload more vids to keep the channel alive. Thank you for all your nice comments, you seem to be one of my biggest fans... I appreciate it very much. ;-)
@sandorrozsa61485 жыл бұрын
Thank you for the new and great video. I don't really know the "-5V" requirement. Could you tell how sensitive is the PCB to Power Supply "-5V" changes? -4V or -4,5V isn't enough, right? Thanks in advance for your answer.
@billwilliams63385 жыл бұрын
DOKTORZETT, can you explain more about how arcade games use the multiplexers to switch on and off the graphics and V&H sync signals. Why are they using RAM chips as a buffer chip? why not just use a buffer chip instead of using a RAM chip? Does the Test diagnostic program have the address mapping and address decoding RAM and ROM ranges built into the code?
@colindevaux44765 жыл бұрын
nice to see a new upload.been a while my friend. :)
@christophzett5 жыл бұрын
Yes I'm still around, trying to revive the channel ;-)
@azariayehezkel90644 жыл бұрын
Hi doktor Whats up? We will see another video in the future?
@wasitsa19503 жыл бұрын
Very nice videos..do you do repairs for people mine has bouncy graphics..
@azariayehezkel90644 жыл бұрын
Hi dok There is video on the way?
@crunchsixfoe4 жыл бұрын
Love the channel! Great repair here. Are you available to hire for repairs? I have a Boogie Wings from Data East that is having background layer issues like this DD.
@michelecioffi182910 ай бұрын
Hallo Christoph, habe ein Double Dragon Original-Board, welches jetzt leider nicht mehr läuft. Hätte ein paar Fragen bzgl. Reparatur. Kann ich dich via Mail kontaktieren? Danke!
@dssaction2 жыл бұрын
Hi, will you be able to fixed my double dragon board if send it to you?
@christophzett2 жыл бұрын
Well, I could try... where are you from? is it an original pcb or bootleg?
@Micca-PNG4 жыл бұрын
My uncle has a Double Dragon board that won't boot properly, do you have any idea what the problem could be? (I think it's either the CPU or RAM) kzfaq.info/get/bejne/rbl4arWVydvaj30.html