Glad it helped! Dave

LMFFAAOOO LITERALLY !!

Omg same here! 😂 I opened the manual and was mildly reminded of some Swedish furniture brand... 🥲

Me too!!

+Luke Tube . Thanks Luke. over 85,000 can't be wrong. Thanks for the lovely comment. Dave.

Celtic Dreams np mate

+Luke Tube I bought one a few weeks ago and just opened it. Have to say the manual is worthless, first thing I did was look here. The tools wouldn't fit the collet as it was mashed into the retainer. Seeing the video it made sense to press it out and drop it into the Dremmel. I do have a "Prinz" knockoff but it is a feeble little thing compared to the Dremmel. Excellent "Get-You-Started" tutorial, thanks Dave

+myglaren I had the exact same problem! This video helped me out a lot.

+myglaren same to me

Thanks. Dave.

Thank you so much. Awsome video!!

Definitely!

AND A NAIL CUTER XD 😅😅😅

+david keightley Thanks, the manual isn't very helpful. Hence the video. Dave.

+E. E. (Liz) ....Thanks Liz, what a lovely thing to say. But I do understand, power tools can be intimidating. Especially an unusual thing like this. But once you understand what it can do, then you're away! Thanks for watching and for taking the time to leave such a lovely comment. Dave : )

Thanks. Glad you found it useful. Thanks for watching. Dave

Great to hear. I think many people have done the same. It's actually a great tool - once you understand what to do with it. Thanks, Dave

Thanks for watching. Dave

You're very welcome. Thanks for watching. Dave

same haha a video is much more helpful

+DC ..Thank you. Due to the huge success of this video, I have contacted them, but no response. Thanks for watching and for taking the time to comment. Dave.

Thanks. Glad to have helped. perhaps check out my video on the Dremel Cordless too, as I show how to use the Speed clic accessories. Dave

Thanks Ken, glad it helped you out. Thanks for taking the time to comment. Dave.

Glad it was helpful! Dave

+Junn Bryan Trongcoso . Thanks for watching. Dave

Thank you. Glad it helped. See also the video (below) on the cordless Dremel for some info on a few of the other bits. Dave kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html

Thanks. Hopefully you can find some uses for it now. Dave

Lol, just read this and the same I nearly threw it out the window in frustration, if you have never used anything like this before the instruction manual is useless x

Thank you both. Glad to be of service. Dave ; )

Celtic Dreams Just got mine today! Recommended by a guy at Lowe's. I had never seen, or heard of them before (I can't believe it! ), and I told him that I was working on a popsicle stick house for my hamster, and needed something that I can saw into it, to avoid the pressures of using an exacto knife. He said, can I show you something cool, that I think will be perfect for you? I said, absolutely, appreciate it! He took me to the Dremel 3000 on sale from $69, to $49, and he too could've been a spokesman for Dremel lol You guys should be paid! He even told me to look at KZfaq videos, and that I would be amazed on everything that I will be able to do! You guys have got me so excited about this darn thing, but out of the box the collet was stuck, but of course I didn't know that, and was afraid to turn and break something. But seeing your video showed me what I could take apart with no damage, and viola! Popped it out, stuck it back in, and bam! Just like that I have me a DREMEL 3000! Haha thanks so much!

..

+manny gill .... Thank you for taking the time to leave such a lovely comment. Dave ; )

Thank you so much for the lovely comments. So glad you enjoyed it and found it helpfully. Kind regards. Dave.

+Karen Booth Thanks for the nice comments. Glad you found it useful. Dave.

Thank you very much for the lovely comments. I'm glad you enjoyed the video and found it useful. Because this video is so long, I also uploaded an edited 5 minute version. SO its great to know that you found the extra information in this extended one useful. Thanks for watching! Dave Celticdreams.co.uk

Celtic Dreams I haven't watched the shorter version but I am so so pleased I found this one as I needed to know what all the bits did and didn't do ... like the little metal pole with a screw on the top .... That just confused me no end ... so when you showed how to use it with the cutting disc I was thrilled ..... I would recommend anyone who has never had a Dremel to watch this video it covers nearly everything and you explain it so well ... many thanks once again ... Tina

Glad I could help! Dave

Thanks for watching. Glad to have helped. Dave

Thank you for the kind words. Glad to have helped. Dave

No worries, thanks for watching. Check out my video on the cordless model too, as I show the speedclick accessories. kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html Dave.

You're welcome.Dave

+CyrodilicMonkey Thank you for your kind words. Dave.

+Philip Hunt . Great, get stuck in and play. it's a great tool. enjoy. Dave.

You're welcome! Dave

It can be overwhelming at first when you see all the bits. But hopefully it all makes sense now and you can start having some fun with it. Thanks for watching. Dave

S Hahm Thank you. Glad I was able to help. Dave.

Yes, just get one of the "cut off discs" great for cutting screws etc. Dave

Glad it helped! The models change a little but the basic operation and the tools are the same. Dave

Glad it helped. Check out my video on the lutlichuck too. definatley a must have upgrade for a few pounds. Dave kzfaq.info/get/bejne/fMmcds1oy9uuZmg.html

+Christina Nichols ...You're welcome. Glad it helped. Dave.

+john hagby Thanks for the lovely comment. And thanks for watching. Dave.

Thanks for showing your appreciation. Glad it helped you out. Dremel did get in touch and offered to "lend" me a Dremel for a few days to do a video on (which they then wanted back). ?? Thanks for watching. Dave

Glad to help! Dave

Thanks. Glad it helped. See also the cordless one Dave. kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html

Glad I could help! Dave

Thanks. Hopefully my video is much better than the printed instructions. Glad you found it useful. Dave.

Tony O'Brien Thanks Tony. Glad it helped. : )

You're welcome. hope you found it useful. Dave.

You're welcome Thanks for watching. Dave

Thanks. Dave

+Jeff Butwin You're very welcome. Dave

You're welcome. Thanks for taking the time to comment. Dave.

Thanks for watching. Do check out the video on a "stuck chuck" too you may find some useful information there. Dave kzfaq.info/get/bejne/fMmcds1oy9uuZmg.html

Thanks, glad you got something from it. Thanks for taking the time to comment. Dave.

+James Dyche Thanks for watching and for your kind comments. Dave.

Thanks. I don't' have any specific videos on using diamond tips. But here are a few things I've discovered in my own drilling and engraving. The diamond covered burrs aren't as tough as you'd like them to be. The diamond particles are bonded to the burr and will eventually wear off. So tip one, is gently does it. Too much pressure will just strip the particles and leave you with a bare metal burr. work slowly and let the tool do the work. Typically you will be working with hard materials such as rock, minerals and glass. hence its important to keep the material damp, with a sponge or cloth. I now many glass engravers do this under running water, but i cant endorse using a plug in power tool under running water. Obviously if engraving glass it vital to dampen the dust as you don't want to inhale it. A damp sponge also helps to keep the drill cool. A diamond bit cuts with an abrasive grinding action rather than a sharp cutting action, so they do generate heat. Hope all this helps. Dave.

Thank you. Dave

Thanks for watching. I'm so pleased I helped you out. Don't forget the thumbs up. check out the other Dremel videos I've done.Dave.

No worries there you are on my saved list for favourites and watch later lol x

Thanks Gavin. Glad you found it useful. Kind regards. Dave

Glad you enjoyed it. Dave

Good for small jobs defiantly. Dave

Glad to help. Dave

You are welcome! Dave

Thanks, the printed instructions are useless. Thanks for watching. Dave.

He's Dave as well XD

Thanks. Many others have said the same thing. I don't work for Dremel, but they have seen my videos and do like them. Thanks for watching. Dave

You're welcome. Thanks for the lovely comment. Dave.

Thank you for taking the trouble to comment. It's appreciated. Check out my other Dremel videos. Best wishes. Dave

+Angie Quinby you're welcome. Dave.

Demel's website is organised into the different materials or the different activities, so you can search for all grinding accessories, or or all accessories for wood. see the link. Dave www.dremeleurope.com/gb/en/products/accessories/?start=0&System=Multi-Tool+System

I heard him say that too! Made me smile.....

+Monina Naylor Thanks for the lovely comments. So pleased it helped you out. I presume you mean "Rotary" tool. Although that said, there are actually "rosary" tools too, for stringing beads and making Catholic rosary beads...... I need to get out more. ! ; ) Dave

Ha. Thanks for sharing that. An unusual birthday present, but why not?. Have fun and thanks for watching. Dave ; )

Thanks. Dave.

Thanks for watching. Fair point about the nails, - not as offensive as some other comments I have received. See also my review of the cordless....kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html Dave

Aye, to each their own. I am grateful for the time he took. Perhaps he is a guitar picker or just likes long nails. Thanks again Dave! Praise God brother.

You're so welcome! Thanks. Dave

You're welcome. Check out my cordless video too, (below) with a few more accessories. Dave kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html

Interesting. In normal operation the Dremel is going forwards, and so the screw cant naturally unscrew. If the screw and the disc just fell off then the most likely thing is that the screw thread is stripped and you need a new mandrel. This is caused by over tightening the screw, as they are only small and quite delicate, so very easy to strip. But again, the discs are also very brittle and so caution is advised when tightening them up, as they will break easily. Dave

Thank you for the lovely comment. Dave.

Hope you enjoy it! Dave

Thanks for watching, I've made a few Dremel videos so do check out the others too, for more tips and advice. Dave Multi Chuck kzfaq.info/get/bejne/fMmcds1oy9uuZmg.html Right Angle kzfaq.info/get/bejne/mMxgd7OZ39-bg2g.html Cordless kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html

Thanks for the comments. Hopefully the video helped you get started. Dave

Welcome. Dave.

Thank you. Dave

Thank you very much for the lovely comments. Dave.

Yes, the sanding drums. Slow speed to avoid heat. Dave

Nice

@@CelticDreamsCoUk Not to be rude, but I think they were suggesting you try the nail "trimming" accessory out.

LOL

There’s one for pets

Thank you. I have received a "lot" of negative and many downright abusive comments about my nails in this video. So it's nice to hear a more polite one. Thank you. Dave

That same nail also caught my eye!..hehe..

Jealous of it..made others jealous too, I guess...(jealous is not the right word though..) I admire a man who also takes care of 'himself'..respects himself..

You're very welcome! Thanks for watching. Dave

Glad I could help! Dave

Point taken. Thank's for watching, hope you found it useful. Dave.

@@CelticDreamsCoUk I was going to ask if you could use the Dremel to trim one's finger nails. Indeed a nice sounding fellow who would sound a lot better with a decent mic. All in all nice video. Thanks for shooting and sharing.

You're welcome. glad it helped. Dave

You're welcome! Dave ; )

Thanks. Perhaps worth watching my other video too. kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html Dave

Glad it helped. Thanks for watching. Dave.

Glad it helped. Dave

Glad it was helpful! Dave

+LORENA A Thanks for the lovely comments. Good to know I helped you out. Dave.

Thanks for watching. Dave

Fantastic! Glad I could help .Dave

They don't make them like they used to. But if it works, make use of it. enjoy. Dave

Ive made a couple of Dremel videos with different accesories. So perhaps check out the others too. Dave kzfaq.info/get/bejne/aLWiY8mC1rvRdo0.html

Thanks for watching. Dave.

You're welcome. Glad I helped. Dave.

You're welcome. Thanks for watching. Dave

Glad it was helpful! Dave

Glad it helped. Dave