Drop Target Rebuild and Tips Gottlieb

Рет қаралды 2,406

Goat Shed EM Pinball Repair

3 жыл бұрын

Drop target rebuild and tips Gottlieb 10 bank

Пікірлер: 16

@markjackson1444 7 ай бұрын

Another great, useful video guys. Thanks very much for all your vids. …so helpful.

@goatshedempinballrepair8545 7 ай бұрын

Glad you enjoyed.

@jetcom1121 3 жыл бұрын

Another great educational video !!!! Thank you for taking the time to make this one !! You have helped me immensely with expanding my abilities with working on these old EM Machines with all of your videos you make. Spanky keeps you guys busy !!

@donowen9848 Жыл бұрын

Great advice on checking continuity and ohms on the coil(s) and checking for touching wires after assembly; those are potentially big time savers - cheers!

@donowen9848 Жыл бұрын

Commenting a bunch since I just finished up a Big Indian DT bank rebuild and DT replacement. I went back several times to view the specific steps to rebuilding since I didnt take but a few pictures. Very well done indeed.

@goatshedempinballrepair8545 Жыл бұрын

Great you've been having a go and that our videos helped you out .

@frankholtznagel6078 3 жыл бұрын

Great Work on the Video Kim & Graham, that's one Big Drop Target Bank....Gottlieb...Built Like a Tank !! Long live the Goat ;-)

@donowen9848 Жыл бұрын

Nice video, thanks for sharing.

@goatshedempinballrepair8545 Жыл бұрын

Thanks so much glad you enjoyed it

@moobutt 2 жыл бұрын

I have a Lawman. Love love love it.

@goatshedempinballrepair8545 2 жыл бұрын

Enjoy your game thanks for your support

@lukefuller5778 2 жыл бұрын

This one helped heaps. Just had to strip, clean and reassemble the drop targets for Fast Draw. First drop targets I’ve dealt with. Thanks Goat Shed.

@wolfweb 3 жыл бұрын

Great info. Looking forward to the next video.

@VaxxedStories 2 жыл бұрын

Important: The two sets of springs have difference strengths. The weaker springs attach to the targets. If you attach the stronger springs to the targets, the reset coils will not be strong enough to reset; at least not in a 10 target bank. That was my experience.

@goatshedempinballrepair8545 2 жыл бұрын

Yes true and there's not much in the 2 different springs either a good point !

@fltenwheeler Жыл бұрын

@@goatshedempinballrepair8545 The A-18995 spring that goes to the drop target is 0.014" wire an is 15/16" long. The A-517 spring is 0.018" wire and is 7/8" long.