Happy 2022 Doctor D.S.

Happy New Year 🧨🎇 And enjoy the video 🎞🚜🌨

Nice mower

The "chains" on the back look really good! On the front of my Simplicity 4041, a 1500 lb machine, for snow plowing, I deflated the front tires, added a #40 roller chain on the center of the tread and re-inflated them. Gives much better steering on the ice when pushing snow.

Excellent. My next project. Too many negative comments here, give this man credit for being creative. Or just shut up.

Excellent job really useful 👍 👏

Makes it easier to plow and go off road if you take the mower deck off

Думал час будет кучу снега гребсти а тут и метлой снег можно было вымести😅😅😅

Great video

Try losing the mower deck during winter.

Whether in the manufacture, installation and use, it's simple, fast and efficient at all levels

Happy 2022. Great idea my friend.👍👍

Happy new year Doctor D .S

Phenomenal work getting those chains that tight on your tires. Bravo

It’s a great idea for the back tires only thanks for the video

Why do you need chains on the front wheels? Is the mower four wheel drive?

Now I need to look for scrap bed frames in the garbage

Супер! Снизу к отвалу надо приделать резиновую ленту Я привинчивал полосу вырезанную из автомобильной покрышки, та часть где протектор. Она жесткая и износостойкая. Тогда отвал не будет портить поверхность и прыгать на неровностях.

Awesome! One recommendation, put high spot welds on the top of the bars. On side hills you now have skis.

Ive been thinking about building a drop axle off the rear pto and finding tracks but have had trouble finding tracks. These are a perfect idea

Regular tire chains would have been my choice.

coming soon how to replace mower transmission

Great idea 💡 thanks for sharing. I just wish I could have some snow this decade 😩 lol.

Your the best 👌thanks for sharing 👍I need that for my tractor 🚜 cool. Kind regards from London UK 🇬🇧.

Wow..nice homade.. good job my friend

Doctor ds you got me! I try and swipe your dang notifications every time I see it!

Wow. These are the best tire chains/tracks I have seen and easy to make. Good job. I may build a set for full size tractor that had turf tires.on it.

Svaka čast majstore super ideja

How about video on how to take mower deck off ...? Dr ...?

That is awesome!! Please give an update on how well they are holding up.

Great job ! Looks like you should patent the chains and market them!

Problem solved!!! I love your genius idea!!! My dad would love you!! Now put them on the market so I can buy them!

Predobre ideje imas svaka cast 💪

Bust up the pack and ice too ! BRAVO

Not a bad idea. I don't know what advantage there would be to front chains when most lawn tractors are only 2-wheel drive. I was surprised to see the blade because you could have probably blown the snow off with your mower deck.

Awesome Work nice to seee goin to give it ago we got lots of Snow Goin to build for My Quad see what happins thks again Keep them Comin Farmer

Genius idea!! Well done!

Great video! Need something on the front tires to help with steering on ice!

crazy , regular pair of chains cut off will do the same thing

that will raise alot of hell on the cement !!! 👍👍

Najlepszego w nowym roku! Doctor D.S. włącz kosisko do trawy.

Did the front help with steering at all? In slushy conditions, and heavy wet snow, I have difficulty steering. I turn the wheel but keep going straight.

those are more like the steel tracks for a wheeled bobcat than tire chains. awesome idea!

THIS GUY IS A GENIUS I LOVE HIS IDEA IT'S A PROBLEM SOLVER.

I never seen a man to weld so quick.

That's bad ass dude and well done Enjoy your snow removal

Brilliant! I had a lawnmower like tgat that I was using for getting wood , and it was spinning like mad , if only ..... Thank you very much

Great idea.Happy New Year everyone./Odlična ideja. Srećna Nova godina svima.

Nice. I like those. Good job 👍

simple efficient thanks / idea

頭良いな！ great job!

We made these years ago for bob cat applications. They didn't hold up we utilized different type of materials. It was cheaper in the long run to buy factory tracking.

Ovo kad' pogledam, odma' mi gusjenice padnu na pamet... 😂🙄😅

Sretna nova godina.

I know some guys that used their lawn tactor to plow or bought a snowblower for the front. They used chains on the rear but they had to add weight to the rear of the machine to get enough traction on ice even with the chains.

It’s awesome as long as you understand that you are destroying your lawn under the snow and come spring your going to have tractor tracks going back and forth across your yard but still very cool idea 👍

Similar to ones on my skid steer loader but best ones was the floating dozer type skid steer tracks around tires

i would try notching the center of each cleat to prevent lateral movement on ice

you put the chains on back ward, well in forward if you put the small side of the angle iron first then the longer side going back ward its more stable cause the long side is pushed against the tire! Just my two cents worth , Im only trying to help.

Da li je itko pravio ove pance za terenca i kako se ponasa s ovim lancima?jer ih sebi mislim napravit

Great idea

These work decent on Bobcat 643 and s70 but you gotta use bent flat bar on the ends to keep them guided on

those front tire chains would be great on a snowblower especially if it were track drice blower those would make great tracks

Now that is a really cool idea 💡 nice job

Saw this video and then went and made my own, except I didn't have any angle so I used some old T-posts and cut the knobs off the ridge.

Great idea🏅🏅🏅👍👍👍

You made a monster tractor Dude 😂 I mean look at it Broh that's awesome 👏🙌

Good work...good shop

It seems the chain is galvanised: the good weld practice is to remove the zinc before welding. Did you considered any spring or rubber to tension the chain rather than enflate the tyres?

Great idea. Wondered if instead of angle iron sections maybe sections of chain might work to conform to tire better. 🤔

What an awesome idea! Thanks!!

Hey bud nice craftsmanship, but I'd like to offer a word of caution from a guy who works on mowers for a living. Your chains are going to beat your transmission to death. The repeated jarring and bouncing causes the top of the transaxle case to break up and the bushings will crack as well. I've seen it first hand with craftsman poulan and husqvarna tractors and it appears your machine is made by the same ayp group. Wheel weights would help but unfortunately the extra rotating mass ends up tearing up the brass worm gear inside the transaxle. Your best bet is to fluid fill the tires and stud the tires if you have enough lug depth on them and add a small weight box. If you want any help or suggestions on doing anything of those things send me a message I'd be happy to help.

That got me thinking about making steel lug wheels for a garden tractor.

Супер. Молодец. Браво. Лайк. Так сделаю себе на минитрактор. Пламенный привет с Татарстана г.Агрыз Россия 🇷🇺🖐️🤝👍🇷🇺🇷🇺🇷🇺

First of your videos I’ve seen. Excellent! Now, about the security fence…. The horizontal at the top should point to the outside of your property. Pointing inwards it’s ineffective.

Those are cool, however tear the hell out of asphalt driveways.

Bad ass snowdozer😍

Молодец здорово всё отлично получается.

Hey if you want even MORE traction I would suggest putting them on opposite sides, backwards of what you did.. Just my thoughts when I saw it, let me know if you try it please.. #1- Your going to get a much better, deeper edge with the snow being able to sink into the tire tread before hitting the 90° edge opposed to the flat part of the angle iron contacting the ground first and limiting it's bite the depth of that edge minus the thickness of the gauge opposed to coming from the other direction.. #2- If you're losing traction, tire begins to spin and then the edge catch's on something solid I think that stress would easily flex the the front edge of the angle iron off the tire tilting your 90° biting edge back on an angle causing loss of ultimate traction.. Where if it's backwards it would have the full width of that angle iron pressing against the tire acting as a brace to keep it close to 90° and prevent it from just twisting everytime it's stressed causing loss of traction.. ( If using strictly for snow on pavement or concrete this probably wouldn't apply but I think most people's comments and interests were to make a set for added traction 'off-road'.. Comment if you agree or disagree or have tried.. that's how we learn !! 👍

I don’t know if you meant to make your design the way you did or if it was just trial and error, but excellent choice of paddles. I seen some videos of guys using channel iron instead of angle iron, and that was the wrong choice. They would plug up. Whereas angle iron is like self cleaning. well done.

how much time did it took you to made the rear chain?

If it starts snowing i am going to mow in the snow

those are some sick snow chains.i need to make these.michigan snow sucks

Odlicno... Nocas bit ce mozda snjega i dobro bi dosla takva ralica 😀 Sretno u 2022-oj i puno novih ideja ti zelim. Veliki pozdrav iz Slovenije.

Awesome thanks

Stop and think for a second, this was never tried before? This didn't work very well? O yea, chains is what works!

Dude take the mower off, for one you get the salt on mower it's going to rust badly, that's why they came out with tractor weights?

Great job but I don't understand why you still have your mower on in winter??? I'm sure that creates drag!

How much would you charge to make those I have the same mower

excelente ideia.

Srecna nova godina❤️, jako mi se svidja tvoja kreativnost bukvalno kao moja 😂

That was downright awesome I could use a set of those we got 16 in here

Nice job 👍

great traction

Я смотрю снег для вашего региона редкость.🤔

bravo copile esti tare

Good job!

E da ima prednju vuču mogo bi ić u šumu izvozit drva😂

Good job! I think I will do this but I will just use half inch square for the crossbars.

Big blade on it!!