DT SWISS H1900 Rear Hub Strip down and rebuild.

Рет қаралды 14,168

Жыл бұрын

The Rear wheel with a mind of it's own. A complete Rear hub strip down and rebuild in the good old Yorkshire Bike Mechanic fashion.

Пікірлер: 66

@adamsibbald1163 Жыл бұрын

Another great video, thank you for continuing to do these.

@TheYorkshireBikeMechanic Жыл бұрын

Glad you like them!

@AntnMTBLER Жыл бұрын

Great job! Thanks for that mechanical content!

@TheYorkshireBikeMechanic Жыл бұрын

Any time!

@thomasmoran1799 Жыл бұрын

Thanks for that Dave really enjoyed that one

@TheYorkshireBikeMechanic Жыл бұрын

Your welcome

@newbeginnings8566 Жыл бұрын

Always informative and relaxing with Dave. I've no intention of ever doing this but just like watching the videos. As usual Dave get's the job done with ease as he has a myriad of adapters, drifts, tools etc. As a one off DIY operation it's just not worth it. I guess I could get 3 wheels done at the LBS before I covered the outlay on these essential pieces for this overhaul...

@TheYorkshireBikeMechanic Жыл бұрын

Yes, if your just doing the odd one it's not worth it

@michael_emtb Жыл бұрын

Great video Dave 👍🏻

@TheYorkshireBikeMechanic Жыл бұрын

Glad you enjoyed it

@Toni-mv7iu Жыл бұрын

great explanation. Bravo!! 👏👏👏

@TheYorkshireBikeMechanic Жыл бұрын

Hi, thank you for watching and your comment

@nicolaicirbov4871 2 ай бұрын

Great video, very informative!

@TheYorkshireBikeMechanic 2 ай бұрын

Glad it was helpful!

@cannonballebikesltd9660 Жыл бұрын

These are good all round wheels which I use on the majority of my rentals. I do prefer the XD Driver for longevity. Great Information thanks Dave

@TheYorkshireBikeMechanic Жыл бұрын

Thanks Colin

@stephengomme777 5 ай бұрын

Nice one lad bobs yeah uncle & fannys your auntie 👍 proper job thank you for showing me that very well explained step by step cheers 🍻

@TheYorkshireBikeMechanic 3 ай бұрын

Glad you enjoyed it

@stephenbrown5844 Жыл бұрын

Brilliant dave, thanks for the footage my friend 😊❤👍🇬🇧stay safe and sound. I've now decided on DT instead of hope. Do DT come in other colours 😊👊

@TheYorkshireBikeMechanic Жыл бұрын

Thanks for watching and your comments, only black/white im afraid.

@supermelongify Ай бұрын

thank you very helpful.

@TheYorkshireBikeMechanic Ай бұрын

Glad it was helpful!

@drc226 Жыл бұрын

Good stuff

@TheYorkshireBikeMechanic Жыл бұрын

Thank you

@E.Bandier Жыл бұрын

Thanks🥋

@TheYorkshireBikeMechanic Жыл бұрын

Youre welcome

@thomasmoran1799 Жыл бұрын

Thanks

@TheYorkshireBikeMechanic Жыл бұрын

No problem

@TheYorkshireBikeMechanic Жыл бұрын

Thank you for being a Super Fan too.

@KeepSweetGaming Жыл бұрын

Might sound silly but to double confirm,. Do these fit regular bike frames 😅🤷🏼‍♂️ I got my self the bbshd and it's stressing the crap out of my 'MTB' wheel

@TheYorkshireBikeMechanic Жыл бұрын

Hi, could you explain your question please

@emcon3 Жыл бұрын

I always watch your videos. I also own an H1900.I overtightened the thru axle and wore out the freehub spacers.I can no longer remove it with my fingers.Any ideas?

@TheYorkshireBikeMechanic Жыл бұрын

Hi, sounds like it needs a strip down and new parts where the existing ones are damaged, there is a great hub slit diagram from DT swiss with part numbers, if you let me know the part numbers you need I will post you some as long as your in the UK

@islandaerial3414 Жыл бұрын

You didn't happen to measure the rotor side clearance from the end cap? 19mm? 15mm? Cheers! Hey Dave how does the XD FH driver hold up? I've worn out 3 HG bodies because the cassette chews the bejesus out of the splines 😉

@TheYorkshireBikeMechanic Жыл бұрын

Hi, All hubs are 18.4mm from the outside of the rotor mount face to the end of the endcap, that applies to boost and 142 hubs

@joeyyhc3883 Жыл бұрын

I feel like I want to drive the 4 or so hours to Yorkshire just to get you to service my bike lol

@TheYorkshireBikeMechanic Жыл бұрын

Crack on, give us a call to book it in

@stephenbrown5844 Жыл бұрын

Send it off,,, or go mate, well worth the journey 😊👊

@jeanmartin963 11 ай бұрын

not only the old version needs the special tool for the freewheel. I have a HU 1900 from march 2022, with the same hub DT 370 ratchet LN18 than the H1900, and just after 6500km I have some play inside, I need to change the bearings, one is rusty and the other one as a lateral play, and surprise, now that it is open, I need the special tool. Expensive, do not last more, and need a special tool...

@TheYorkshireBikeMechanic 11 ай бұрын

Hi, yes the tool is essential im afraid

3 ай бұрын

I have a wheel like this, but micro spline. and it doesn't have the spacer like the one that goes before the freehub, where did you get the manual image of this model? I'm not finding

@TheYorkshireBikeMechanic 3 ай бұрын

Hi, here you go, www.dtswiss.com/en/support/manuals

@thulsadoom2567 Жыл бұрын

Where do i get this handy tool for working on freehub bodies without damaging them at 20:40? Is there a version to work with Shimano Micro Spline too? Would be nice thx!

@TheYorkshireBikeMechanic Жыл бұрын

Thanks for watching and your comments, the one I used was made by Chris King tools, Im still looking for a microspline holder

@thulsadoom2567 Жыл бұрын

Isn´t the "cog spline wrench MS" of "Chris King Universal Hub Tool" fitting for Shimano Micro Spline? Can it be bought alone without the whole kit?

@robinbreeds9217 3 ай бұрын

Hi mate what is the size of the brass drift you use, width & length. In the past i had used other tools to do that.

@TheYorkshireBikeMechanic 2 ай бұрын

Hi, Thanks for watching, Ive tried to find it in my drawers but its disappeared. I will look for it some more, if I remember is was 15mm x 150mm

@robinbreeds9217 2 ай бұрын

@@TheYorkshireBikeMechanic Thanks mate your a legend. I been watching your videos as i just got a Trek Rail 9.8 XT gen 4 for the hills here in North Devon, i love all the tips you have done. Have a few wheels that i need to service, DT Swiss back wheel from my Rocky Mountain Pipeline C70 lying around. All it needs bearings put in.

@markoradenkovic5108 9 ай бұрын

which is the mark of a small bearing?thank you

@TheYorkshireBikeMechanic 9 ай бұрын

can you give me a time stamp?

@markoradenkovic5108 9 ай бұрын

@@TheYorkshireBikeMechanic I found the number of the small bearing 15x24x5. Thank you

@lereveure 8 ай бұрын

important question if this video is to be used by diyers like me : what are each tools and where to get them thanks

@TheYorkshireBikeMechanic 8 ай бұрын

Hi, for a decent set www.amazon.co.uk/Enduro-Unisexs-BBT-013-Service-Chrome-Plated/dp/B07KFN1J78

@christophenglert4831 Жыл бұрын

brilliant guide! unfortunately the dt swiss ratchet ring didnt become lose. instead my tools got bent :/

@TheYorkshireBikeMechanic Жыл бұрын

Sorry to hear that, they can be super tight

@teovm 7 ай бұрын

@@TheYorkshireBikeMechanic In that case what is our next step. Trying with some penatraiting oil? Also what how can I find the tool that you put the wheel on, the one with the plastic top. And what is that freehub holder, I can't find that eather.

@Mr_Wh1 2 ай бұрын

I don't understand why you are greasing the bearings when you put them back in? Is it to make it easier to slide in? I thought the idea was to make the inside of the bearing do all the sliding/rolling, and not the outside?

@TheYorkshireBikeMechanic 2 ай бұрын

Hi, thanks for watching and your comments. the grease acts as an anti seize for future maintenance

@lukasbad5646 15 күн бұрын

"Why do you lubricate the outer part of the bearing?", wow, it's strange that you ask such a question, after the fact that every service manual mentions it, even logically speaking it is probably easier to reduce metal-to-metal friction when mounting the bearing by using grease , a bearing greased from the outside should theoretically be easier to fit into the hole.

@Mr_Wh1 15 күн бұрын

@@lukasbad5646 Funny you have such low self-esteem.