Batman stayed in the dumpster?! Should have sent up his bat signal!

Those Texas Instruments Command Modules are for the TI-99/4A vintage computer. There is a thriving vintage computer community, maybe you could find a local buyer to sell the whole lot and save shipping.

For scrapping, you are spoiled in Calgary. Maybe a new video series as well? Scrapping across the nation. Re the wire - you have a stripmeister - run it through, it will cut one of the inner wires at the same time. One pass = two bare bright.

Doesn't look like there are alot of committed scrappers in that area. You found some good stuff.

I am holding my copper. Reason to believe it will skyrocket.

The bucket of nails made me lol.

I haz you on my favs list, channels on my favorites list I like comment and I watch the ads the whole way through to produce higher ad revenue.

That ford badge is a easy 20 bucks at least

After your second, "better than you found it" I jokingly did a jazz hands and, "Yeah!" just exactly the same times as you did... My laugh for the day was amazing--thanks!

I gotta say Thub, your vlogs are one of the reasons that I look forward to Fridays. Awesome videos thanks man. 👆

Looking forward to you getting the truck back so you can pick up all the steel you find, instead of leaving it behind.

Mr Thub, a good strong magnet would help you, especially when existing the dumpster!!!!!!!

At the start of the video, you said it was an okay haul,but it was a very good haul.

im jealous

I always get scared for you when you go in. Good job. 👏👏👏❤️💙

Every time you jump out of the dumpster and on your feet I can feel my ankles Crack! Be careful.

Yesss a fresh upload

Montreal is beautiful!

nice load on the coper

Could put that long steel bar between the hinged dumpster door and bend it in half or at least in a u shape to fit in your car, next time.....

Great day for scraping

Maybe you could take the passenger seat out so you can fit a lot more stuff. At least until you get the pickup back.

Thank you for the video, there is something relaxing about seeing all that scrap metal not going to waste.

Montreal seems cool. Although the only french I know I learned from 80s movies like Gotcha and Better off Dead. Bon Crayon es Jaun, classic.

We always try to wait and take the biggest load in as possible when we go and take a load in.

i like scraping the parade for bottles and cans then converting the money to coin. missed saint patricks today to early

Great video

Great run, you have a friendly demeanour which which puts people at ease, the point of asking before you dive is valet, but what do you do if nobody answers the door. Personally I don't mind seeing anyone making a living dumpster diving so long as the leave it better than.....

I absolutely love rolling up on a Dumpster and finding a good score.

I get some delight hearing your Canadian come out when you speak to someone off camera.

It's unbelievable how all the wire is dumped where you are! I've just started collecting any copper wire and copper pipe i see when going places, all the appliances I see have the cable already cut off and actual cable wire non existent really unless you're a proper skip diver! So many collecting scrap around London nowadays.

Reminds me of a shirt I saw that said, "Weekend forecast: 100% chance of dumpster diving" Great finds!

What fun!

Thank you for the update.

Wow what a great run and video!!

Great stuff

Love your videos Thub! You are very entertaining and taught me alot. I appreciate your ideas!

That was really a great haul! All kinds of goodies.

That was a decent haul Thub!

Wow great job

Always look forward to seeing a video!

That’s Top Notch Snow Scrapping Right There @thubprint Great Haul Sir 🙏🏼💪🏼👍🏼 Sweet Wire Finds in the Dumpsters Man. I Love how you went Out on Vaca 💪🏼🛠️🗑️ Trash = Treasure. DUMPSTER BATMAN 🦇👀 !!!

They were some good dives. 👍

Good Haul!

Heck yeah buddy great finds on all that wire!! Found some great stuff! Great video!!

Nice haul. Interesting watching the breakdown of the scrap

What a haul

Another great video Thub. My favorite part is the processing, it's something I find enjoyable to do myself. I'd sure like to see the truck back in operation

Thub, you were in Montreal! wow I am down the street in Ottawa. Hope you had a nice trip east, Spiderman knees. ;). And that first blue dumpster, with all that wire, happy you found that. Never happens in Ottawa. Everything is locked up tight here.

I dive in skip bins same way you do 😂

Really enjoyed the video great haul of wire

Great haul. Glad to see the vehicle made it to Montreal. You said you were going to tell us why a trip to Montreal. Be safe out there.

Trash Panda 🐼 Approved! Thank you for the videos!! ⚙️

That looks like a great day. Quality over quantity.😂😂😂😂😂😂😂😂

Excellent score on the BX and no1 from florescent light fixtures!🏴‍☠😎

I find your videos refreshing even if its not a big "adventure. Also want to comment that you are the only scrapper that I have seen that gets cans and bottles so you live in a decent state that recycles wish all states would start .

“Michael Jackson… Bad… nah I don’t want that” Stuffs it in his pocket off-camera and pops it in the tape deck on the way home…

Great vid. Almost to 100k🎉🎉

Not birds looking for treasures. I'll bet it was squirrels.

I do the same thing you do and I hand out business cards and always ask for permission

Love your videos, I have been following you over a year now... You even encouraged me to save up my own scrap from work and turn it in the scrap yard, it was a fun experience. Thanks for taking the time to make those videos. Are you a full time scrapper?

This is going to be an awesome restoration, Chris. The light bulb inside may possibly be used as a current limiting device? Also, when discharging capacitors it is good practice to keep your other hand in your pocket. Saves you completing a circuit and smacking yourself in the face, or possibly something worse.😊 Cannot wait for the next episode. Cheers NN.

I like your videos

Well, I haven’t said much even though I am still watching, but my 4Runner was involved in an accident a few weeks back and was totaled. Not my fault, luckily, and the other guy’s insurance is going to pay out (hopefully soon!) but I have been out of the game since then and I am going crazy! Luckily my buddy who let me borrow his S-10 a couple years back is going to sell it to me for cheap, so I will have a scrap truck (an open bed will be sooo much better than an SUV) that is already… not trashed, but let’s say I won’t have to worry about it if it gets dinged up a little as it already has some “love” to it. But I have been going stir-crazy, not to mention not making any money. Ad thing is that I keep seeing stuff I would pick up, including a passel of brake rotors nearby! I just hope they are still there when I finally get the truck. My plan is to go “HAM” on some scrapping and save for a car I can drive that looks decent and gets good gas mileage. Cross your fingers for me!!! Oh, and as always, great video! Thanks for helping me want to keep doing the thing. Take care, Drake!

Dang great copper and brass find.

It's interesting that you crush your bottles and aluminum cans. In the Netherlands, we are required to return them to the supermarket uncrushed.

To each is own but i will always strip the 2 wires inside the romex. I dont scrap based on what I would, should, or could make per hour.

Love you doing the thing, you should think about doing the cuts accross the brass, thats what i do and all the copper comes easy out 95% of the times, so you ger clean brass and clean copper

21:30 ATB music! That's so good!

Snow looks annoying, glad I don't need to deal with that,

Bro you are balsy. I’d definitely jump into a roll off If it was parked on the curb. But In person driveway on their property ?lol I don’t think I’d be down for that. But might give it a try one of these days lol

Been watching for a while and love the fact that you can make a little money and leave the environment better than you found it! Quick question that may have been asked before. Do you have any friends that are contractors, plumbers etc that might be interested in some of the select scrap? I am a handyman and I would give 2 to 3 times the amount you might get for the pipe, fixtures, electrical etc. Might not be worth the hassle? Thanks again for everything.

Oh and I'm from. Winnipeg Manitoba I noticed your from Alberta probably Calgary

Okay, I just subbed. Can you do a video that helps identify those poor man’s precious metals? I’ve been collecting copper, aluminum, and brass. Picking up refrigerators, washer and dryers. Anything. I’m glad my wife hasn’t asked me to stop. I guess cause I break down and pass the metal onto some older man.

Thanks for sharing your experiences with us all. I'm curious, have you done a video in the past explaining how you got into scrapping? If not, I'd love e to see that video. It would be awesome to learn more about you. Thanks from a former Calgarian 👍

I always keep batman stuff 'cause it sells very quickly :)

You had an aluminum drafting table arms. Wish I could call you to save it.

Good job! Where is the truck? Any update on the repair?

I have always wondered if you could use a sandblaster for wire stripping

You seem to get lucky in every bin 😂in the uk it's like looking for a needle in a haystack

Keep the nails, that stuff is going to disappear and if can find very will be expense. When will your pick up (truck) be fixed ? Fun watching and educational. Your good @ stuffing your 🚘

You gotta learn to use the dumpster to your advantage! I get long pipes like that in small spaces by bending them using the dumpster for leverage. They are tougher than pipes that size. 😃

Wow! Awesome video. Have you considered travelling for day trips just for finds outside of your normal area?

Il est clair qu'à part la récupération de métaux, beaucoup d'objets sont à récupérer : Les cassettes, les bars d'aluminium (pour projet, si encore droites), les jouets, les meubles à restaurer ... ... ... Même l'acier et fer doit être conséquent au bout d'un moment. Bon travail, chef 😃.

Do you not carry a cordless sawzall with you?

Is the truck gone forever? I scrap with a full size silverado and it's still a struggle to make it worth it...could not imagine doing it in a car.

Great video just wondering do you separate your brass the water meter shell is red brass its worth more than regular yellow at least in my neck of the woods

oops! Spoke to soon. The rolls of Romex really do it for me!🏴‍☠

yo what do you do with cans do you take them to the yard or do you recycle them for the like 5 cents?

Man you find the best stuff. Dam good.

I know that most of this channel is about dumpster diving for scrap metal, but do you think you could do more videos of you dumpster diving for food at places like Tim Hortons, 7-11, etc?

Have you ever thought about stepping up as a full time scrapper? Like getting the big stuff??

I’m curious as to what you do with the plastic sheath after you strip the wires. Recycle as wel?

Je voudrais aller au Montreal une fois en mon vie!

You left several buckets behind in the dumpster.

❤ scrap yard follow up? 😅😊

I am really surprised that trades in Canada and the US throw away pipes and cables. In the UK, trades keep any off cuts and old cabling and pipework to cash in as a nice little Tax-free bonus.

And most demolition job sight's if I give them my business card they always phone me back

1:59 SCORE!!!!!

Thub you like a big ole hooser racoon EH 😂 but luv da videos i just spent 5 hours hauling heavy steel one bag at a time on my e bike luckily only 1 km to haul em but yes im building a trailer