Dave did a flash tune on my 2019 Ninja 650 (non LAMS version) to suit my full Akropovic system (no Db killer). Together with the Cortana quick shifter he installed, the bike was completely transformed. Can’t recommend Dave more highly👍🏼😀👏🏼🏍.
@Murad.bn2 Жыл бұрын
Great explanation and tuning! I've read that in Germany, Kawasaki dealer does de-tune to A2 license (similar to LAMS, restricted to 35 kW ~45 bhp) if you don't have A1 yet, and then can return to factory 68 bhp once you present your A1 (works with Vulcan S, Z650, Z650RS, and some other 650cc bikes). I was thinking in other countries official dealers can do the same.
@AnthonyNichol-yp1yt7 күн бұрын
Awesome video im going to contact you guys and organise a tune for my 2014 ninja 650
@everss028 ай бұрын
kspp makes some velocity stacks, the stock are soft rubber and close up at high rpm, you can see the power dips at higher rpm because of them
@SynicalBeats2 жыл бұрын
Thanks for that. My 17 felt faster than my 22. I didn't know about that throttle restriction
@Jurica-mtb Жыл бұрын
Hey man, on 2:00 you needed to put a piece of paper behind the torx so the camera's len could zoom it properly. ✌️
@someguy5035 Жыл бұрын
That screw design is known as "security torx."
@brett96482 жыл бұрын
Quality vid mate
@MrSupercharger992 жыл бұрын
Great video 👍 does removing the screw from the throttle body on its own do anything for the bike?
@patc5585 Жыл бұрын
Came here to ask the same thing mate
@Dynobike1992 Жыл бұрын
Yes the bike will run ok, just not to it's full potential because there are restrictions in the software.
@IkarosCanFly Жыл бұрын
Is this the same on the 2023 model as well?
@bigwangmark Жыл бұрын
Thinking Of buying the Kawasaki z650rs and while I am happy to keep it in lams mode for a year or till I am used to riding more and the bike i di like the idea that they can be un-lams rather easy. Will any shop doing the ecu flash refuse if i have not got my open licence yet or the sort of thing they will not ask me to prove? Don't reply to that question if any legal issues might pop up over it though :) I'm happy to wait till I can get the open licence but with time and work it's easier to just stay on the restricted licence and open up the bikes power.
@davea99462 жыл бұрын
Love your vids mate. Do you get the customer to sign a waiver when doing the de-restriction?
@Thomas-ep8qu3 ай бұрын
How much NM do we gain when we suppress the throttle limiter screw ?
@jwbonnett10 ай бұрын
Are the Z650's restricted at factory? On the Kawasaki site I see that it shows a badge for A2, though it can be a category A bike. I baught one after doing my DAS, but it feels slugish for what a 650 should be... But it could also be that I have never had a bike before and don't know how it should feel power wise.
@kevrevs138 ай бұрын
What happens if you don’t tune it after derestricting it?
@bigcobberbuilds9634 Жыл бұрын
Don't do this until you're on a full license people. If you hurt someone and they figure out you've done this when you're a crying mess down at the police station...you're going to be in serious trouble...
@someguy5035 Жыл бұрын
No one would ever know. It adds maybe 10% to the total performance. LAMS is nonsense anyways.
@banana-ui2qd Жыл бұрын
@Some Guy urrrrr most lams 650 bikes are 50hp or less - de restricted they make 80-100hp . That's alot more than 10%
@tdunster2011 Жыл бұрын
Having a full licence won't save you because derestricting the bike makes it unregistrable and uninsurable in Australia. If you injure another party or property your insurance company will be well within their rights to dismiss your claim and leave you on your own to fight any case brought against you. To make it legal you need to have the modifications certified through your states appropriate body [RMS in NSW] then have it reregistered as a non-lams bike. it's a very expensive exercise and simply not woirth the effort as you could just buy a better bike and still save money.
@Cheesus-Sliced Жыл бұрын
@someguy5035 noone would ever know except the crash teams that would inspect the bike and check for limiters. Sure, you might get away with it, til you crash and suddenly your insurance is void and you're in prison for an assortment of crimes.
@lucasvanleeuwen413027 күн бұрын
@@tdunster2011not true at all. You can register and insure it as derestricted if you’ve got a full license
@ikillz259 ай бұрын
Just upgraded my licence, with removing the throttle screw it dosent need mapping correct ?
@donmoiseskivuli9 ай бұрын
So I cant do this myself ? I would need the computer software ?
@scottrobinson15642 ай бұрын
They use them same security bolts in jail to attach our stainless steel mirrors ect 😊
@danielantonello4088 Жыл бұрын
What would pulling the baffle out after it has been tuned, with the baffle in, do? Just if you wanted some more noise one day? Im guessing a little loss of power
@Dynobike1992 Жыл бұрын
Don't know for sure without testing. The rule thumb is tune for what you intend to run
@Snoupity Жыл бұрын
I thought the 650L was just the restrictor screw + an ECU thing you unplug under the seat? Whats dis about the tuning?
@mixispid11 ай бұрын
That's for pre-2020 models, it switches or unlocks the map in the ECU. 2020+ comes with only a single mapping and no plug.
@MissJazzmineS Жыл бұрын
So I called my local Dyno to book having this done, and they said nah throttle restriction is enough… they made it sound like it was a waste so I left it… I’m just worried about you mentioning it will affect low speed handling, what do you mean by that?
@Cheesus-Sliced Жыл бұрын
What he means is that valves open and close for a reason. If it's fully open when it should be, it adds power that you want. If it's fully open when it shouldn't be, it adds power that you don't want.
@leolego22 жыл бұрын
cool but on the Kawasaki website an unrestricted bike should output 68cv/hp. Why is not the case? are you using American horsepower ?
@spartanx169x2 жыл бұрын
Power to the rear wheel vs at the crank. Advertised HP is almost always at the crank. You lose 20 to 30 HP from the crank to the rear wheel generally.
@Dynobike1992 Жыл бұрын
No we measure power and torque at the rear wheel. Manufacturers figures are not.
@jamied4191 Жыл бұрын
@dynobike1999, where are you located ???
@Yitzbrah2 жыл бұрын
I thought they had 2 ecu maps and you only had to remove a certain plug. Is that true?
@BenDover-oc7vl Жыл бұрын
Did you find out if this was true
@moreorlesdone1497 Жыл бұрын
@@BenDover-oc7vl I think he was referring to the pre 2017 models. You had to remove the plug and also the throttle stop screw.
@patc5585 Жыл бұрын
@@moreorlesdone1497 I believe you are correct. A gentleman I met asked me to test ride his ER-6L with the plug removed/ shorted and the plate screw removed. This would have been in the pre 17’ gen I believe. And yes, his bike did feel a little bit quicker than my ninja 650. But not by much with his low tyres and minted chain 😂
@Dynobike1992 Жыл бұрын
Either way what you don't realize is that it's running to EU compliance and is restricted in the secondary throttle plate. The improvement is good but nothing like our tune
@jace7541 Жыл бұрын
what about a LAMS z650rs?
@Dynobike1992 Жыл бұрын
It's the same bike, but without fairings
@jace7541 Жыл бұрын
@@Dynobike1992 cheers mate. Ill probably start with the throttle restriction first to see what that does and then make a decision from there. Other option is to keep it Lams for resale.
@xXNeoNashXx Жыл бұрын
@@jace7541 howd you go de restricting your rs??
@jace7541 Жыл бұрын
@@xXNeoNashXx I haven't touched it yet.
@jf9866 Жыл бұрын
Does this work for the Kawasaki versys 650L as well?
@Dynobike1992 Жыл бұрын
Yes it does
@Jxxc3e2 жыл бұрын
What’s a zid 650
@colleenminter6298 Жыл бұрын
can you take out just the throttle plate and not the ecu one?
@nickbasiliou57442 жыл бұрын
Can this be done for the z650rs as well? I think the engine is the same.
@er6ndriver6702 жыл бұрын
Did you find something?
@nickbasiliou57442 жыл бұрын
@@er6ndriver670 not yet
@aperlia6603 Жыл бұрын
I need the answer for this as well.
@sergeantktc915011 ай бұрын
@@aperlia6603Yes, most probably. Its the same engine. It also works on a Kawasaki Ninja 650, so z650rs wouldnt be different… (just advice, not 100% sure).
@andrewsoldan60502 жыл бұрын
versys 650 also has this restriction?
@Dynobike1992 Жыл бұрын
Yes
@Snoupity Жыл бұрын
@@Dynobike1992 No! Versys 650 is just the screw
@David-vb8tg Жыл бұрын
poor old ninja engines won't last long if they spend much time above 6000/7000 rpm...shes designed for cruussiinngg
@bevansvids Жыл бұрын
those engines are bullet proof they will take what you give them all day on the track !!