E Revo 2.0 Limiting Straps And Testing

Рет қаралды 84,060

6 жыл бұрын

I put some limiting straps on the rear end of the E Revo 2.0 and test it out. I'm trying to solve the issue of the rod ends being pulled off the shock rods.

Пікірлер: 409

@evhexrc1765 6 жыл бұрын

Wow! Every erevo owner needs to know this for sure!

@richardwood8967 6 жыл бұрын

Thanks for the tip, ever since I did this "fix" I haven't had any issues. Before this fix I broke it on second and third run in. I called Traxxas and they were usless. Thank God we have community to share the knowledge. 👍

@outsourcedrc 6 жыл бұрын

Awesome!

@chrisg7160 4 жыл бұрын

I like your videos...entertaining and helpful. I’ll followed your advice and made the mod to my Revo 2.0 that you showed in your video. It’s been 3 months since the mod and no issues. Thanks!

@outsourcedrc 4 жыл бұрын

Thats awesome!

@user-hf4dj4su7w 4 жыл бұрын

Man, thank you so much for the video. The quality of the review is worthy of the GOD level !!!

@outsourcedrc 3 жыл бұрын

lol thanks

@johngibson9168 4 жыл бұрын

Just got the e revo second hand in almost brand new condition going to be doing this upgrade soon love the info keep up the good work and thanks again for helping enjoy this great hobby

@outsourcedrc 4 жыл бұрын

Awesome

@iamthemercury 6 жыл бұрын

Genius fix here sir. Thank you. I’ve ordered the parts. The moment I cart wheeled (93.5 times it appeared :-), and saw the truck was looking a little weird...I knew this is what had happened. Saw your video before buying the truck. I’m amazed that people are already selling these. They are WAY more durable than the savage I own. It’s a hot rod and hot rods break (just like the one in my profile pic!). Great truck...cheapo servos (what do we expect for so cheap?? Thanks for the info dude. Smart fix here!

@outsourcedrc 6 жыл бұрын

Thanks so much! I just made a video about 1 servo vs two.

@ModernMetal7 5 жыл бұрын

Thanks dude! I purchased the limiting straps and will install asap. Appreciate the info!

@greasysniperr 6 жыл бұрын

Love when it hit the camera, awesome view.

@outsourcedrc 6 жыл бұрын

Ha. Thanks. I've hit that thing several times. It's all broken and bent. The tripod I mean.

@micronrc3856 6 жыл бұрын

Nice back flip fakie to face plant to 180 side flip to reverse landing, 😂😂😂😂😂😂😂😂😂 straps look good seem to work pretty well on limiting the suspension.

@jessecrenshaw8510 5 жыл бұрын

Im thankful I found your videos my friend. You do good work.

@outsourcedrc 5 жыл бұрын

Thanks!

@ImurTuta 4 жыл бұрын

you could probably preserve the health of the shock ends on all your RC's by extending the length of your ramp so its more gradual with a small kick at the end. Hitting short ramps at high speed will bottom out your suspension really hard. Just a thought! love the content!!

@Ohwell423 2 жыл бұрын

Got my revo 2.0 today. What a damn beast.

@outsourcedrc 2 жыл бұрын

Thats awesome!

@porkchop94 5 жыл бұрын

Just put on the 100 mm straps. 90mm are sold out. Thks for sharing this awesome idea. And especially the screws and spacers sizes. Works great 👍

@outsourcedrc 5 жыл бұрын

Awesome!

@tomtracks3007 5 жыл бұрын

Great video and very informative. 6:45 is the part number and size. Thank you so much. I'm gonna definitely reinforce mine this way seems to solve the problem i was having👍👍

@PeterEnis69 4 жыл бұрын

thanks for the timestamp

@fueltoblaze1554 4 жыл бұрын

Thank you!

@PeterEnis69 4 жыл бұрын

actually I use the 90mm straps without that extra plastic in the chassis brace

@clayboist 5 жыл бұрын

Way to think out of the box!

@hobbycow5346 5 жыл бұрын

I have an E Revo on the way and have been doing my homework here. It's nice to see someone isolate a problem and find a nice cheap fix that works, instead of just trashing the truck. Thanks for what looks like a great bit of preventative maintenance! Also thanks for the links! Great video and great ideas! I have also seen another video where TSM ruins backflipping...another thing to think of. Anyway...Great job and thanks for sharing your ideas!

@timsgta 3 жыл бұрын

I got one within the last week, you'll love it! Also DO NOT buy aluminum toe links, the rod ends are crap. The stock toe links and pushrods will take a beating, especially with chassis brace and straps, I got 90mm for mine. Also I put HD progressive springs from VG. So I'd say springs, brace, straps, extra hardened steel 14t pinion and metal 54t spur, rpm front bumper and rpm control arms are the best upgrades you can get. I wasted money on 7075 toe links...I suggested 14/54 pinion and spur bc a video recommended that for cooler running...we'll see...also get the yeah racing dual fan and heatsink for the motor.

@timsgta 3 жыл бұрын

I almost forgot but you should not use tsm until you do a stronger single servo mod...

@hobbycow5346 3 жыл бұрын

@@timsgta My comment, being a year old.....since then I got it, put the limiting straps on, ran it a few times and then sold it on ebay. It was a great truck, but too much truck for my running space. It was really hard on my lipos as well. I also found I had to set braking to about 60% or it would flip over itself on pavement...lol. Those brakes were amazing! I kind of regret selling it, but just tight on space. The telemetry was cool too! Also, if I remember right, it had dual steering servos that sometimes, needed to be unhooked and synced up. Some people had the 2 servos fight each other which burnt them out.

@buknast1 5 жыл бұрын

Will you post a parts list please? I really like what you did.

@RCsBigAir 6 жыл бұрын

What a nice modification. Very well done. Plus it held up well through some hard bashing. Keep us posted. The car hitting the Camera was funny.

@outsourcedrc 6 жыл бұрын

Thanks! RIP tripod

@benmartin3351 5 жыл бұрын

I think you have the toughest E-revo traxxis has ever made. Lol. Awesome vid!

@giostealthr1 6 жыл бұрын

Excellent video

@markc3571 3 жыл бұрын

Just got my revo 3 days ago, I look forward to this modification, thanks

@outsourcedrc 3 жыл бұрын

No probelm!

@timsgta 3 жыл бұрын

I almost forgot but you should not use tsm until you do a stronger single servo mod...

@tylerfengler7576 3 жыл бұрын

thank god you made new jumps man. listening to your car slam of it every time is like torture lol

@lpsilva2762 3 жыл бұрын

Hey thank you so much for the info and sharing the part numbers- So I could go to Home Depot and buy the same stuff. Great video keep it up

@outsourcedrc 3 жыл бұрын

no problem!

@seanreade7393 6 жыл бұрын

Slow motion shots are awesome!

@outsourcedrc 6 жыл бұрын

Thanks!

@22Tech 5 жыл бұрын

awesome video! those limiters turned out great!

@outsourcedrc 5 жыл бұрын

Yep! Thanks!

@normandykush3134 6 жыл бұрын

You slow Mo,s are king :)

@gian799 2 жыл бұрын

I literally did the same thing but with zip ties from the brace to the cross on the a arms and it works flawlessly along with aluminum rod ends on the shocks

@bretrishelrc9789 6 жыл бұрын

Hey man just to let u know u influenced the rc world with this video. Those 90mm straps are sold out everywhere. Good stuff.

@outsourcedrc 6 жыл бұрын

I noticed lol

@rollingrandy9041 5 жыл бұрын

Sending that thing off the ramp! Sound is nuts. Sounds like a small missile launching. Thanks for sharing how to fix this issue!

@outsourcedrc 5 жыл бұрын

Haha thanks!

@jasonh8470 4 жыл бұрын

Amazing must have cheap fix. Great job

@outsourcedrc 4 жыл бұрын

thanks. It serves me well.

@jimschmidt4089 4 жыл бұрын

Pretty cool video! Liked the jump into the camera. Haha

@davidnguyen1216 6 жыл бұрын

Just bought revo 2.0 last night. Hopefully get your same setup to prevent damage

@outsourcedrc 6 жыл бұрын

It's been working so far.

@freakiebeakie 4 жыл бұрын

I bought those straps also but did not buy spacers or anything so i was thinking on how to connect the straps to the suspention and i came with the easiest solution i could think of . My straps are 85mm and i just placed the strap over the brace from suspention to suspention and it fits like a glove

@outsourcedrc 4 жыл бұрын

That doesnt work. That only limits the suspension from each other, not from the chassis and thats what you need.

@freakiebeakie 4 жыл бұрын

@@outsourcedrc the strap i use is 85mm and when i lift the car the suspension can not travel to the end. i understand what you mean that i connected them and that it seems if they limit eachother but that is not true. while i drive they can move because then the strap is not pulled at (sorry for my english xD) . those straps only need to limit the suspension when i jump. the pushrods only get pulled really hard at jumps and not while driving normally. if the pushrods damage i can always change it but i think it is oke like this.

@markamd1 5 жыл бұрын

Epic video mate! great idea! big like

@craigmac1516 4 жыл бұрын

went with the 90 mm straps being a little shorter i dont think i will need a spacer of any kind... great video..

@jarrettmaltry6305 3 жыл бұрын

How’d it go, did ya end up needing spacers? Also how’d your shock rod ends doin ?😂

@beasterbunny4836 5 жыл бұрын

I’ll have to get this for my Erevo

@JustnikitaMSC 5 жыл бұрын

это болезнь новой ревы. отличное решение,спасибо

@normandykush3134 6 жыл бұрын

Perfect I was going to say put something in between for the straps :):):) That trucks perposly made for bashing!

@dasllamas 5 жыл бұрын

Wow. Brilliant idea. Should have limiters for all models. Prevent popping shock caps ect.

@TheOnishinobi 4 жыл бұрын

This is very helpful. What size are the longer screws that you got from home depot that go into the straps?

@lucarionitetimes2858 6 жыл бұрын

Awesome video!!

@andraybatungbacal 6 жыл бұрын

I put CABLE TIE on mine! It works the same! Problem solved!

@outsourcedrc 6 жыл бұрын

Yep. That works too!

@xarl89a 5 жыл бұрын

can you take a photo of it? would help alot, im getting my evo soon and im gonna make this fix before I go out and run

@StevenGabbard 4 жыл бұрын

Until you drive it. I tried it and one snapped on the first jump.

@cuongandmari 2 жыл бұрын

Dang, I lost count of how many Erevo you have. Oh wait...the magic of editing....:)

@outsourcedrc 2 жыл бұрын

I have 3

@twinturbov8 3 жыл бұрын

I just ordered hot racing 105mm limiting straps and some anodized aluminum pushrods since my stock ones are plastic and they’re bending. They’ll eventually break so I figured I get new rods and try out the limiting straps since everyone says they’re a life saver.

@outsourcedrc 3 жыл бұрын

They are. I think 105mm are too long though. 90-85mm seems to be the best.

@twinturbov8 3 жыл бұрын

@@outsourcedrc Thanks for the reply! If I have to I’ll go shorter, but we’ll see what happens.

@olds97lss 6 жыл бұрын

It's very surprising how much punishment these trucks can take, then other times surprising how easy the break. I'm up to 70wt oil, rc raven springs, vdk#2 in the shocks. It still lands so stinking hard. Tried 80 weight, but then the vdk pistons snap in half.

@outsourcedrc 6 жыл бұрын

I'm running 40wt. I think that the shocks are overall too small for how heavy the E Revo is. If you want to see durable, check out my first video on my channel.

@joshhiatt3194 5 жыл бұрын

Well it’s October 2018..I was able to buy the 100mm limit straps as well as spacers from hot racing, only question is what is the length of screw you ended up settling on?

@samsoncrabtree8336 4 жыл бұрын

Will your E Revo do a standing back flip right out of the box or did you have to change gears? Mine will not out of the box.

@ToGrimmToWin 5 жыл бұрын

Seen another guy take a shock rebuild kit and take the bump stop for the shock shaft in the rebuild kit and put it on the inside of the shock on the shaft to keep it from coming out as far and it has work for him and the rod ends pulling out or breaking

@RCPropaganda 6 жыл бұрын

just order the aluminium ball ends plus the straps. Really hope this works well. I am disappointed I spend 550 on this truck then first run mine broke. How this got through traxxas is beyond me.

@outsourcedrc 6 жыл бұрын

Your rod ends on the push rods will fail next. My guess is that an engineer didn't have a hand on the 2.0. It seems like someone just wanted a beefy E Revo with out testing it.

@jasonc2785 6 жыл бұрын

Outsourced RC same here. Rod ends broke or stripped out literally every time we run it. Any suggestions?

@timsgta 3 жыл бұрын

I know from personal experience that the 8338 toe links, the black 7075 ones are not good, the rod ends do not stay together on those! As I'm sure everyone can attest...but I was wondering how the 8619 push rods hold up on the erevo?

@ShockwaveDJ 4 жыл бұрын

This is a super dumb question but are there limiting straps used for the front as well? If so what size and placement?

@awedwardscleaningsolutions 5 жыл бұрын

Wonder if those straps would work better with the standard rear brace? That slot seems too far back to work with those straps on the aluminium brace

@codycondos420 3 жыл бұрын

That jump at 6:00 the suspension really works for it lol

@MichaelChaoz 6 жыл бұрын

what mm size are those silver spacers? thank you

@RMJ1984 5 жыл бұрын

If Traxxas is smart, they should include this in all E-Revo 2 going forward and offer it to any current owners. Such a small cheap fix to make it more sturdy .

@76Macadamia 5 жыл бұрын

Hello savior :) I would like to know the about the blue bar you have on top where you have the straps around. Your idea is such a help. I'll other the parts and get it fixed like yours. Thanks for sharing your idea to us.

@outsourcedrc 5 жыл бұрын

That bar is the aluminum rear brace that was made for the v1.

@Clickbaiters 5 жыл бұрын

This is something we used to do to our 5B/5T's back when those 1/5 scales blew up in popularity. I would stick with the 100mm and no spacer. If you look at the video clips, whenever you manage a nice flat landing when the spacer isn't installed, the rear suspension does it's job and the Revo lands well. With the 10mm spacer you added, the rear end doesn't function as well and the Revo's back end always bounces hard even when you do manage a good landing. If anything, try a 5mm spacer but it looks like the spacer isn't needed.

@outsourcedrc 5 жыл бұрын

The straps are the perfect length with that spacer. The suspension doesn't drop any lower if I undo the straps. I'm not sure why it seems more bouncy after. It may just be the clips I selected. I didn't post everything.

@Clickbaiters 5 жыл бұрын

Outsourced RC it's not a matter of the rear suspension dropping lower, aka, droop. It's a matter of allowing the springs to decompress more when the the rear end is on the way up. In any event, if it works for you, it's all that matters. Like you said, those are hand picked clips so it's limited on what people can see. Have a good one👍

@t.c.airguns3830 6 жыл бұрын

Nice mate I have that same problem and I’m going to use your idea hope it helps thanks ha

@outsourcedrc 6 жыл бұрын

You can use 90mm straps if you don't want to use a spacer like I did.

@tenncutt 3 жыл бұрын

Great video. Would shorter straps have worked as well as your aluminum spacer?

@outsourcedrc 3 жыл бұрын

yes shorter straps work better. I didnt know what size to buy so I made these work.

@NitroStarGT 6 жыл бұрын

Another question: in the comments, you said the 90mm was a tad too long then later on, you suggest getting the 90mm instead of the 85mm. Is your buddy's 90mm just right now or should I try to build what you did? Thanks big time for info

@outsourcedrc 6 жыл бұрын

The 90mm are perfect.

@MarkHahn 6 жыл бұрын

What size of limiting straps did you use? I want to do the same with mine but am unable to find the appropriate length! Thanks!

@outsourcedrc 6 жыл бұрын

Mine are 100mm, but I have to use that red spacer. 90mm is the correct size

@aaronchurchhill1508 5 жыл бұрын

Nice video! Wonder if it applies to the MERV, probably doesn’t weight enough to stress them like that. Wonder if this was fixed in the ERV2.

@outsourcedrc 5 жыл бұрын

The MERV doesnt have this issue.

@MrAttitude16e 6 жыл бұрын

What was the size of the screws you used

@cityhunter25 5 жыл бұрын

great video!! can you please tell me where you got those bit set to use on your drill? Thanks!

@outsourcedrc 5 жыл бұрын

Thanks! I got them at the hobby shop. I dont even know what brand they are. They are the same ones the hobby shop uses. I think they were around $35.

@shelbyintheolds 5 жыл бұрын

Now you have to build a bigger ramp :P

@maplestreetrc Жыл бұрын

So use the 85mm ones? I see your e revo does standing backflips. What are your settings/gears?

@MyBatzIsMyGunz 2 жыл бұрын

Hi and thanks for the good videos. I just bought a E Revo 2.0 after seeing how much you liked it. It's my 1st ever rc car. Is there anything I should do to keep it healthy right from the start? Or just clean it after each use to begin with bruses and paper towels. I bought 'diff syrup' but I dont know what its for. Are there any other fluids I should stock? I have copper grease to hand.

@outsourcedrc 2 жыл бұрын

The fluids will last you a while as stock. You will need to change them one day. Just be ready to replace the servos and get the limiting straps and you will be good.

@ellocko2028 5 жыл бұрын

Did you have had any problems with the motor? Because mine melted on the fourth drive...

@dickmadison9092 4 жыл бұрын

Did you make any measurement of the amount of drop of the arm vs. after the straps were attached?

@outsourcedrc 4 жыл бұрын

No. It stops it right at the length it needs to.

@rushgush 6 жыл бұрын

traxxas r&d should of addressed this, big time. u should contact them and let them know what’s happening

@outsourcedrc 6 жыл бұрын

We have. They know. I don't know if they are going to do anything about it.

@wegoallout.v2505 6 жыл бұрын

zedrick zedwick They are watching trust me

@mark675 5 жыл бұрын

They want the money for their ripoff spares

@freddievflores9276 4 жыл бұрын

A parts list from you would be very helpful

@outsourcedrc 4 жыл бұрын

In the video I show you the exact package that every part came in.

@peterwalker1962 5 жыл бұрын

Thanks for the vid just bought Revo yesterday and first run i stripped a rod end and lost a shock cap. I can’t source 90mm straps anywhere would 80 be too short ?

@outsourcedrc 5 жыл бұрын

Yeah they would. You could do 100mm and have a spacer like I do.

@ojstimpy 5 жыл бұрын

What about 85mm?

@jamesgeorge609 5 жыл бұрын

Great stuff.....what size bolts did you wind up using? Thanks....tazzzz

@outsourcedrc 5 жыл бұрын

M3.5 x 25mm

@NitroStarGT 6 жыл бұрын

You say the plastic rear brace still let's the shocks break. Do you think this could work by using different length limiters along with the stock brace and accomplishing the same limiting as the metal brace and 90mm straps? I measured and see that 90mm would work with stock brace and using the spacer and longer screws out on the rocker arm.

@outsourcedrc 6 жыл бұрын

The stock brace is brittle. It breaks so easily. Every one I know in person has broken their stock rear braces.

@NitroStarGT 6 жыл бұрын

Good reason! I need to get you on the phone! LOL.

@oldgeezer6470 3 жыл бұрын

Wow!!! Now I gotta go try this. I skimmed threw the video because i was in a hury but i hope you told everything you used. to make it. screw size and all. i hope.

@outsourcedrc 3 жыл бұрын

yes, its in the video. I think its in the middle somewhere... Found it. kzfaq.info/get/bejne/g7B_msapq8WoZKs.html

@gonzodetroitify 5 жыл бұрын

Absolutely love it when a reviewer will take the time to measure out where to put the camera to without question show the total landing of a rc machin , some1 would find it hard to discribe what was being shown, 🏅🏅🏅💥💎, How is the x maxx, is he double parked, or parked up🤣🤣👌

@rhec-yv2bg 6 жыл бұрын

Would you recommend the erevo or erevo 2.0? I actually own the nitro Revo with big/heavy tires and I've never had a problem with shocks or rod ends on it.

@rhec-yv2bg 6 жыл бұрын

What about the arrma kraton? How would that compare to one of the E Revos?

@outsourcedrc 6 жыл бұрын

I don't have any experience with the Kraton. The 2.0 is the way to go. It's not perfect, but if you add the limiting straps and change out the servos you will have a beast of an RC. I'm amazed at how well it takes the abuse I put it through. My V1 ERevo breaks fairly often. The 2.0 is just so much more durable.

@johndombroski5212 5 жыл бұрын

I just bought a Revo and it has a plastic mount where the straps go and I noticed that you have a blue aluminum piece. Can you tell me what Traxxas part that is

@outsourcedrc 5 жыл бұрын

www.amazon.com/dp/B00N62UTAK/ref=cm_sw_r_cp_awdb_t1_qNeCBbPVAQ9NG

@ScottMcLinden 3 жыл бұрын

Man good job 👍🏻

@outsourcedrc 3 жыл бұрын

Thanks!

@taevy12 6 жыл бұрын

sir, have you tried just the alluminnun rod end ?

@outsourcedrc 6 жыл бұрын

Yeah it breaks the shafts still

@julieng194 5 жыл бұрын

Awesome !!! I was so bothered about this issue. After several runs does it fix for goods the issues. Thanks for your video.

@outsourcedrc 5 жыл бұрын

Yeah this has fixed my issue. I've had zero problems with the shocks and I'm still using the stock plastic ends.

@MatrixRC 4 жыл бұрын

Extremely surprised your push rods did not come out.

@outsourcedrc 4 жыл бұрын

They rarely come out.

@lopilloevo 4 жыл бұрын

The bolt size is m3.5x25? I can’t see very well.

@Jstall7543 5 жыл бұрын

Nice!

@goldbeed6202 6 жыл бұрын

Just by my e-revo today. I was wondering do the shocks need or can take oil?

@outsourcedrc 6 жыл бұрын

They are oil filled shocks. Normally they have the right amount of oil in them. You can always check and see if they need filling, but I don't find that Traxxas RCs need oil out of the box.

@tobydyes 3 жыл бұрын

If you press the throttle when you're in the air it does a front flip you hit the break-in level out and if you hit the reverse and it do a backflip

@wilfredbouw5252 3 жыл бұрын

Maybe the spacer is not needed when using shorter limiting straps? Good video 👍🏻

@outsourcedrc 3 жыл бұрын

Its not. This is all I had.

@rps13nismo1 5 жыл бұрын

Part numbers on the spacer and screws please. Straps came in but i don't know the spacer and screws size

@joshuagore2830 5 жыл бұрын

Do you think you could get away with shorter straps and be ok without the spacer at the brace? Maybe 95 mm?

@outsourcedrc 5 жыл бұрын

90mm Straps are the perfect size

@derekh6126 5 жыл бұрын

Anyway you could post the parts list for this fix?

@chevycamaro-rp6tr 5 жыл бұрын

i was just wondering what was wrong with the 100mm straps? why did you swtich to that spacer? i want maximum travel is all and idk if 90 stops it to early

@outsourcedrc 5 жыл бұрын

90 is perfect. 100 still lets the shocks come apart.

@michaelmacisco2566 3 жыл бұрын

Do you run straps on the front ? Some people do some do not. I just got an E revo Installed the brace and straps on the back. Looking for advice. Love your channel.

@outsourcedrc 3 жыл бұрын

Thanks! Nope. No straps on the front. Just the rear.

@nrgskillmedia 5 жыл бұрын

I am about to do the same, isn't possible to use shorter straps and get rid of the aluminum piece? maybe 80 mm straps are ok?

@outsourcedrc 5 жыл бұрын

90mm straps are the perfect size. They are hard to find though.

@olds97lss 6 жыл бұрын

Did you try connecting straps from the rear brace mount out to the pusrod ends? Then it would perhaps help save ripping any of the ball ends out. I'm about 50/50 as to which ones rip out, either the shock or a pushrod end. Might need to get an alloy body mount so it doesn't flex though for that to help. Still use the plastic mounts for the body, but the "tower" part would be alloy as the anchor.

@outsourcedrc 6 жыл бұрын

I'm trying to come up with something. I have some ideas to try.

@olds97lss 6 жыл бұрын

You have inspired me to make my own. Used some plastic coated cable I had when I made these for my 5B many years ago. However, I didn't have any eyelets small enough/strong enough to work, so I had to fold the wire into small loops, wrapped them with more wire, then soldered it a lot and heat shrunk. Not quite as nice as yours, but hopefully will help keep all ball ends from ripping off. Seems fairly solid and I made them just short enough to where the arms hang gently on the cable vs the suspension at full extension. gmarquee98.x10host.com/myPics/98gmarquee/erbe/2018-0611-ERBE-RearShockLimitStrap02-rear.jpg gmarquee98.x10host.com/myPics/98gmarquee/erbe/2018-0611-ERBE-RearShockLimitStrap03-top.jpg gmarquee98.x10host.com/myPics/98gmarquee/erbe/2018-0611-ERBE-RearShockLimitStrap01-side.jpg

@crimsonfancy 6 жыл бұрын

very interesting. Nice work.

@olds97lss 6 жыл бұрын

Had a couple good bash sessions with these so far. Seems to have helped with my issues. Ever since I installed the pro-line 3.8" trenchers, I have ripped at least one shock end or pushrod end off every time I ran.

@bennettsracing8312 6 жыл бұрын

Ur ramp needs abit more of a curve in middle it's like it's hitting a big speed hump really fast cool video tho buddy like the strap idea 🖒

@outsourcedrc 6 жыл бұрын

My next video is me building a new ramp. I filmed it today. That old ramp was built for a Stampede

@WhosMega 4 жыл бұрын

Just a question, Instead of using that piece of aluminum why not just buy shorter limiting straps?

@outsourcedrc 4 жыл бұрын

Because I didnt know I would need shorter straps when i started making the video and i wasnt going to wait another week to get some.

@WhosMega 4 жыл бұрын

@@outsourcedrc so now that you know what size would you recommend me getting?I ordered 85mm I hope thats a good size

@outsourcedrc 4 жыл бұрын

@@WhosMega 85 seems to be what everyone else is doing.

@NitroStarGT 6 жыл бұрын

Will I regret ordering 85mm straps? Will the limit travel too much after they stretch some? The 90mm straps are out of stock everywhere!

@outsourcedrc 6 жыл бұрын

I don't think you will. I don't think you will notice a difference

@NitroStarGT 6 жыл бұрын

I bought the 85mm straps, along with the aluminum rear brace, and it is perfect. It actually tightens up good right before the shock gets to full extension. Thanks for this video!

@outsourcedrc 6 жыл бұрын

Awesome!

@MyBatzIsMyGunz 2 жыл бұрын

Did this fix stop the brakeages long term?

@outsourcedrc 2 жыл бұрын

Yes. they worked perfectly.

@freddafishy 4 жыл бұрын

Why is it the back that only needs them? Doesn't the front tires and suspension get whipped up when you accelerate? Or is it not bad. I basically just asking if I need this for the front shocks too. Thanks for the great vid!

@outsourcedrc 4 жыл бұрын

The Rear does different things than the front. Its not the same motions. You dont need limiting straps on the front.