Thank you Kevin you made me inspired to Love RC

Can't wait to see how the new toe links are holding up. I haven't busted mine yet. The only issues I have had is busting off the the front mount (part # 5314) and I bent the Rocker Arm post (part #5354) I can't believe that the entire front bumper/front mount is held onto the truck with the ONE screw located between the front shocks. Seems kinda like a week spot.

Awesome job kev! I did finally get those drills u use. Very nice, no problems. Anybody in the hobby should consider them!

Great video Kev she’s gonna be running like new again 👍😎

Also you put the rear links that you always break upside down! Maybe thats why you always break them!

I was waiting for this time to come

I like the time laps. Your pretty cool man.

Had to work on a friends recently and I agree there not the easiest. I also changed center diff oil from 20 million to 1 million for more driverbillaty. Good vid 😆

Anybody else want to see a bashing or rebuild of the e-revo 2.0??? I know i'd love to see how I can make mine more durable.

Yesss!!! The revo! I haven’t touched my diffs yet but ever since I got larger tires I haven’t been able to flatflip I think it’s time to gear down.. but man what would that end up doing! Lmao no wonder you were buying the little rc’s great vid man as always! Always checking up on you lmao hope you’re doing good it’s snowing in co.

So, did it work? Hard to tell from the footage. But I agree, filling up the diff with harder oil can make a huge difference. I’ve even used AWG (Tamiya anti wear grease) and silicone grease to get a better limited slip.

That ks for another great video. Looking forward to a step by step guide. I think I will need to do mine soon. Quick question does the oil go off after while if you don't use it.

Nice Workshop Video yay

Love your videos keep up the good work

awesome video , love the e-revo

You can get to the rear diff by taking the skid plate off then pulling the lower suspension arm pins.

😁Looks hard to wrench on but It does look nice!

Some people are just picky your videos are great just the way they are everything they need to do the same thing is on the traxxas website or in the manual that comes with the truck

You were right, you only have to remove the skid plates to get the diffs out. It's a Traxxas, they make it simple to work on once you figure it out their way of doing it. Haha 👍👍

SWEET!! MORE E-REVO 2.0 vids

Hi Kev, what grease did you put on the diff? Thanks love the vids by the way👍

Love the vids! keep it up.

Nice Vid Sir! 👍👍👍👍

Would the rear solid diff from the UDR fit it looks like it could be that would stop the power bleed off completely.

5:02 you forgot to say “to stay notified” 😂

Oh my gosh... why on EARTH is it not 8s yet!!!! KEV!!!! come on now LOL. That'd be so cool to see!!! Cool video too. Yea the Revos take a bit of learning and time(a lot of it too) to figure out how they are put together but they are pretty easy to work on once figured out. You can take the diff out without even removing the wing and the upper part of the bulkhead(the part that is screwed into the actual chassis). The things are a BEAST when you put paddle tires on the rear and some badlands on the front!!! Paddle tires on all 4 ends don't make it handle really nice though. Also, make sure that center diff is nice and tight if you do do it! Cool video and fun to watch! Sorry this is 2 years late LOL

Yes another vid😍

That thing be break dancing 😂😉👍😁🤙👌💪

Will this cause the truck to over heat easier turning the gears threw thicker fluid?

Hey kev. I have a few questions about the e revo 2.0. I have seen you beat it up pretty good. But I'm kind of in the process of building one from scratch. By that I started with a used 2.5 revo with bad engine, and have decided i wanted an electric version. So swapped as much as I could from the 2.5 to a 2.0 vxl chassis. So i have a pretty good idea on the tear down as well as putting it together. I am far from done as I can't really afford it. I still need the important stuff like the tranny, esc, motor, appropriate controler and receiver as I have the old one from the 2.5. Also need the appropriate waterproof servos. Oh yeah still need the body as well. And the batteries, as well as the charger. Far from done. More then likely it won't be used until next year around this time. But I am curious as to what the 2 screw holes are for on the rear chassis brace? Are they for limiting straps? As well as what are you thoughts on a locked rear diff? Furthermore I am interested in finding out if it would be worth putting a sway bar kit is worth the time. Like I said I can't afford it so it's being pieced together. When done it would be a new used 2.0 vxl. I sincerely look forward to hearing back from you. Maybe you have some pointers. Thank you for your time!

Hi im turkish i love you and your channel

which allen keys you can use for the dewalt driver

What kind of axels do you use

WOW you seriously kick its ass. and it keeps going. Kinda disappointed about the X-MAX diff comparison, but I still have a blast driving it LOL

Good workshop video as usual kev. Quick question what have you done on your udr to stop the side panels ripping through the screw heads mine done the same as yours ripped out first time out haha bigger washers don’t work ?

Hey Kevin, do you ever use Hot Racing upgrades ? what’s your opinion on them ?

Is there a way of getting rid of slipper pads in a bugster

What kind of grease do u put on ur diff not in it but in the outer gear

It may not be as easy as the Xmaxx but it’s a lot easier than what you did, just the bottom cover and slide the pins out of the bottom arms and then just the screws for the diff cover

Try and put the e revo 2.0 on 8s

Great vid

Lov your channel

Can you do a video on lipo batterys

where do you get you tiny allen keys for the drills? Please post a link would love to get a set cant find any locally that small

love the videos

You'll get the hang of it in no time. Aloha!

hey kev OWESOME vid . I tried to buy a set of shocks and it said invalid ? also I'm thinking of getting a hobbywing max 10 is it good =)

Waiting on the ARRMA vids :-)

nice vid as usual :)

Awesome as always! Hey Kev- What wt oil do you use in your Xmaxx for bashing? (I also saw the trick of putting in an earphone gel. lol But I can't find what wt oil you use.) Rebuilding my thrashed rear diff, due to the self-right tearing things apart. Going to try to shim it over as you showed in one of your other videos. Thanks!!

Hi Kevin Talbot , which do you believe is a better car, the erevo or the tmax. Does the tmax handle out wirse on the track or simmilar? Many thanks in advance

What about a e revo 2.0 durability test with the new toe links

Making the rear diff a bit more titer or locking it will mean that the back end of the car will cone out more rather that there diff actually trying to ditrubute the power, Not bad at all But traxxas recommend that you dont use the car for speed runs, I have one of these to I also have a pimped out e maxx, with a locked rear diff and noticed the back end of the car came out lots more. Also im from birmingham, Would you know of any great places to bash rc? Thanks @ Kevin Talbot

Hi friend, I'm from Brazil and I have some questions. I would be very happy if you would help me! I have already discovered that it is necessary to apply grease to the outer gears of the differentials, but I really wanted to know if I should also grease the gears of the engine. Example: 6448 parts: Spur gear, 8985: Input gear transmission, both from Traxxas Maxx. Another question is that the center differential gear comes into contact with a motor gear, should I grease it too? Part 8988. Inside Driveshaft 8949, do I also need to apply grease?

Hi, could I get a link of the differential oil?

on the kraton, to open the diff you have to get out only 4 screws

You only needed to take of the rear skid plate then the diff cover. In my opinion it is much easier then the xmaxx.

I thought the title said drifting,😂🤣

Kev, where is a good place to buy the allan bits for a drill/driver?

Test the 1/16 scale e revo

Try to make the E-Revo rear steer

Can a rustler vxl do this tricks??

Nice video

Hi kev do you think a 45 amp esc is Good enough for a 2wd 1/10 monstertruck? Thanks! Love your videos!

like all vids like it is and you are a god ps plz you are the rc god

Kev get a set of sweep racing SRC look them up there steel belted Awsome tires I run them on my Arrma talion v3

Hey, you would think the people that made Traxxas would do a video how to strip down the truck!

nice wish i had money

You should get a savage xs

Hey again Kev tell me how can I send you a fanmail

Kevin ERevo 2.0 have central diff like all profesional truggy or buggy kits like team łosi, durango, mugen and other? And why ervo is monster truck not truggy whats the diffrence?

Sweet

how thick should a diff oil be in a Rustler with 2.8 Tires for bashing i am a noob can someone please help me?

Kev! Guys I converted my Revo to electric and it diffs out to the front tires , do I just have to put some thicker oil in my rear diff to fix that !???

1:48 what type to grease is that?

You can break it before you put up on the shelf lol

Howdy Kev From America

Farther you go into your rc the more you learn its never a bad thing to tear it completely down to do maintenance

Cool

Hi can you do a notr video plez

I got one Question: I just bought a e revo 2.0 and the those little rod ends for the rear shocks keep braking (don't knwo the name) Has anyone a solution for this couse i always have to buy new ones and they break very fast. Greetings from Austria P.S. Wenn hier wer deutsch kann auch so antworten. Danke! (If anyone can speak german please answer so. Thanks!)

Why not clean everything when you have it broken down?

Hey kev I have the v3 kraton and I will turn on the car and then as soon as I turn on transmitter the front wheel turn right and then lock there and they don't turn back until I shut car off. Is it a short to the ecs, servo or transmitter box?

Hi Kevin. I am new to the rc world. What was the tyres and wheels sizes you had on the traxxas. Been looking at wheels for ages find it a bit confusing what tyres fit on what size rims. Please help. Russ

How's your hobby hub going is it great is it back up and running

May i have that c10 😊

I watched a tik tok ad better be worth it

Can you take remote control car out in the rain gentle rain misty rain

I'm so confused! Is there an E-revo 3.0? You've had your E-revo 2.0 for ages longer than the latest model came out. The latest model is referred to as "next gen E-revo" on the Traxxas website which I think is basically the 3.0. It says there are only a handful of parts carried over from the last model and there are dozens of upgrades. I got the latest model but it looks exactly the same as yours! Do you have the latest model Kev? Haven't you had yours for over a year now?

Do you have problems with wrecking your screw heads?

You should do a give away

I love that rc your should get the traxxas simmit

Something is wrong with my e revo and it keeps clicking

Hi Kev

Like 4 kevin talbot

What’s up kev how are you?

Do you like that car

Hay

Hello Kev

Ponle una pila de carro