Thanks for posting this video and all the product testing you do. Definitely saving us revo owners some cash and downtime!

Love your video's. Definitely stick with plastic Rod ends... RPM Makes great stuff! 👍👊

Lunsford toe links, 109mm. Direct fit on an e revo 2.0, stock rod ends thread right on. Haven’t broken one, regular skate park bashes.

Good job on that work bench! Looks nice, I'm in construction and carpentry so I can appreciate it.

Do some videos about more diffrences between the first gen erevo and the 2nd gen!

Great review thumbs up 👍 I have first gen revo and the 2nd

Cool video man. I like how u work then run it then work and run.

Thanks for the video dude. I highly doubt those are actually Titanium though, if they were you would likely be looking at a price of about $100 USD per rod at least and that little car would not likely bend them even doing cart wheels. Generally Titanium is twice as strong as 6061 T6 Aluminium. Although it also depends on how the rods are physically shaped for the specific geometry of the vehicle as well. Keep the videos coming dude✌

Love your videos!

Try Lunsford Titanium pushrods for the V1 Revo. I haven’t tried em yet, but I use there turnbuckles on my Slash 4x4 and they are strong as hell.

Wow I'm actually impressed by the amount of abuse the ERevo can take with what I could call a fair minimal damage. Sure rod ends popping is annoying but they are cheap as beans, buy a lot of them and take them with you on the field. Easy to replace. I've got the original ERevo and I love it to the bits...... and I take with me a set of rod ends just in case ;) . After almost three years of abuse I changed a couple in the push rods and I've rebuilt the shocks a couple of times. Never popped a shock rod end, but they come with the rebuild kit so I just replace them as well when doing the shocks. Enjoy and thanks for sharing.

Great review, thank you!. I never liked integy they always break.

I started watching this video and was like "damn those look sweet, hope they hold up. If they do I'm getting some myself". The disappointment after I seen what was happening to them when you were running them. I am like you, getting tired of the rod ends pulling out. So much so I ended up superglueing the rod ends on the stock rods. They are holding up for now as far as that goes. It always seems to be a specific rod end that did it to me all the time. Even when I replace the ends. Like for example. My right rear keeps pulling out at the nuckle and my right front at the chassis end. I did find rod ends (plastic ones tho) that are like a half inch longer meaning more thread engagement. They don't really help on the OEM rods as they don't have the threads long enough. I found rods that were threaded almost 3/4 of an inch on either end that worked. I haven't tested them yet tho as I had to get another 5 cell battery pack for my Revo 3.3. It isn't hard to fix the problem when the rod ends pull out, just gets annoying. I'm doing trial and error just as you are. If I figure out a solution to mine, I'll let you know.

Ive been waiting for this

Man they look sweet but I think you're right. They're just too stiff and don't really flex. Thanks for trying them out and letting us know. 👍 do you think using tire glue on the threads of the stock ones would help hold them in? I haven't had one pull out yet but I'm sure it's just a matter of time. Or should I just get the limiting straps?

Hey everyone! Does enyone konws if it is possible installing 120 rocker arm on e-revo 2.0? cheers

Nice field testing.👍👊😎

Love your tests and research! What power source were jumping on?

Not sure what the deal is with Integy stuff but I always break it. Their stuff looks cool, but just doesn't seem to hold up.

I just bought an erevo 2.0 what parts should I keep in stock because of live 1hr away from the closest shop for parts

That’s the problem with metal. The plastic will flex before it breaks. I thought about going all aluminum for my XMAXX, and everything I found was that the components bent easily.

sir, you are the man. I would be so pissed.

Get some Pro Line Badlands pre mounted tires as the stock tires are smaller dia and narrower, and the proline foams are way better! Way softer landings and great traction and wider more aggresive stance!

Have you done anything with the shock springs? Or just stock on shock springs?

You should build a dirt track with some doubles and triples

Hi, Great video. I was wondering if those rods are also for wheel alignment. do you align your wheels?

When that ball pops out, does it break or can you pop it in again?

I think the problem is within the rodends end. It should be flexible enough to consume the hits. It will be nice if someone made an end with some springs mechanism or something like that. So it can act as shock absorber which will allow it to flex without bending and breaking.

You are such a good and peaceful person. May God bless you!

Send me a link to those

What's up bro I would try Loctite on those brass fittings🤬😡🤧 and how is the strap limited-slip working for you I ordered some parts for it think I might do the same thing👍 I got the 80 and 100mm could not find 90..#fastrcs 🚘🏎#OutsourcedRC

Their products aren't any gd I brought driveshafts for my stampede vxl one broke after 5mins

Thanks now I no what I'm buying good testing I didn't jump my cars. I leave that for the Savage 4.6. an revo but red .28. nitro.

You really beat the crap out of your vehicles. Is that your intention, to see how much of a beating the vehicle can take and which parts to fix it with?

Can you give us the link for these

That brass ring you have to loctite them in.

The black ends (or whatever they called), want i've read they are not titanium, but aluminium. If you replace just them to a pair of titanium, it might not bend at all.

That second jump is something I would do! Ha ha.

That bench is so sick I might try make one it probably wan,t be as nice tho

What!? So much damage on that little crash!? WTF dude

So has traxxas came up with a solution for this?

Try and go with a carbon fiber rods and ends

Get summit aluminum long travel rockers

I'd hate to add more weight to her. She's already overweight stock. The aluminum parts weigh the same so the only trade off it's stronger parts I guess for a good premium.

Just like the Stampede, you can't put enough money in this RC to make Jump worthy (except for the Marvels of Tough Designed Engineering that are the Xmaxx and TRX-4). You are better off just playing in the grass and a bit of drifting in the dirt if you don't want to keep breaking that high stress point. You might want to look at the Arrma Kraton,I know it is not a good looking truck, but you can jump all day on the grass and there are no high stress points that will cause you grief when you are just trying to have a little air time fun.

Those jam nuts need to be tightened against the turnbuckle side. Those washers aren't helping at all

👍👍👍나이스

I just ride around with bent pushrods all the time until they brake lol

Titanium doesn't bend it just snaps splinters so its just titanium coated paint on top of stainless steel and it takes a whole lot of crashes to break real titanium

Swap the ends for plastic

Meh do not think titanium should be bending. Seems like the revo is not such a durable rig. Kinda wish I bought something different now. Afraid i will bend my rods every time i go out. Guess will need to tone my driving down.

4:49 deez nutz

Don't know why u do bashing the E revo for and that's why they break because what are u doing to the revo. . . . Tue, 16 January 2020

Buy the traxxas ones

I can't believe the time you waste fixing your car. Ever thought about building a landing ramp? Or a track you can rip around being consistent. Technical course made to be fun a bit differently a mll doable obsticals yet won't break your car. I just bought me an E-Revo 2.0 in great condition orange white and blue for $350 I just can't take something and beat the xiss out of it. my mind don't like that. I do but you to see how much abuse it will take though watching you. Also how are you ever bent titanium pushrods without breaking the end of the mount is beyond me. But Good Job

I've never been a fan of jntegy everything I've bought from them has broken.

You people that seriously think that There’s a car on this planet that would last through a hour straight of repetitive jumps off a launch ramp like this, and NOT break any parts, are out of your minds. I can picture the responses now... “well my cousin’s boyfriend step brother knew a girl that saw I guy jump their _____ scale brushless something-or-other over a two story house a thousand times in a row and land it every time, without a scratch on it!” .... yeah, I bet

You are an innocent child.

these seems to be the most shitty rods you can buy

What a shitty car. I have an kraton v3. I just started in RC world and I am shitty at driving. I swear i have made 10 of those bad jumps and nothing happened. This was on hard gravel. Car looks as shit but nothing broke.