Unboxing and detailed install video of the Yoshimura Alpha 3/4 exhaust system on my 2019 Kawasaki Ninja ZX-6R bike. New camera is the Sony a6400 with Sigma 16mm 1.4 prime lens
Пікірлер: 184
@anthonyk99233 жыл бұрын
Yeah dude this is a awesome video. Haters will say its boring. I think step by step video and not cutting out the video every couple seconds is so awesome to see. I can now do this swap myself. I appreciate the video
@mavricxx4 жыл бұрын
I like your videos man, very detailed. These are the type of videos I love to see!
@godwinmartin34114 жыл бұрын
Mee too
@WC6Q Жыл бұрын
Thanks for recording your install. Really sped things up here. I almost fell over when I revved it. It sounds so good! Video doesn't do it justice. Much respect.
@zagazagas11 ай бұрын
That Yoshi Exhaust sound note is the best
@M82Predator3 жыл бұрын
Damn this was really thorough and well made video, I'm picking up my 2021 ZX6R tomorrow, I can't wait, upgrade from my Ninja 400.
@eastcoastish3 жыл бұрын
That's a big jump, enjoy the new bike and ride safe!
@topx2698 Жыл бұрын
@@eastcoastish do you have the decibel reading for this?
@tricky_d16723 жыл бұрын
This vid is extremely helpful. Good job 👍🏾
@diamondheat94 жыл бұрын
Great video but to give you some extra room and less dead weight you can remove the entire servo unit. All you need to order is a very tiny part called a ServoBuddy that tricks the FI system in thinking a servo exist.
@eastcoastish4 жыл бұрын
kzfaq.info/get/bejne/a76ni5iQ3M_Uf6s.html thanks!
@banditryder46964 жыл бұрын
Sounds good. Can't wait to hear it on the highway. Ride safe keep braaapin!
@victoriagraham5387 Жыл бұрын
Love this video. Thank you for making. All the detail you out in made my install easy peasy.
@jzaden104 жыл бұрын
I love the way mine sounds, I have the exact bike and put the same exhaust on. Fell in love with it instantly especially on the highway, good video bro hope you enjoyed yours.
@JimmyFaev4 жыл бұрын
great video, helped me out alot... I installed the Alpha exhaust today on my 2020 zx6r... its so much louder than i thought! (maybe too loud, i might install the baffle) at some point the servo swiveled, so the mechnism wasnt able to turn.. which triggered the check engine light... get a servo buddy!
@SpyvsSpy-yl9ip4 жыл бұрын
I've got the same bike, same color and exhaust. I'll never sell it. Such an amazing 636cc machine. The only other bike I want is a s1000rr and a Ducati Monster or Diavel. Anyways, the Yoshimura is one hell of a pipe. I looked at all of them...Graves, M4 Street Slayer, Akrapovic, Austin Racing, SC Project, two brothers etc... but I wanted a classic Japanese exhaust for this beast of a bike. It didn't turn as gold/bronze as I had hoped but it still looks great after 1400 miles with this exhaust. The carbon fiber is excellent quality and finish. The heat hasn't warped it at all. All in all a very fine exhaust system, muffler and mid pipe. I recommend a ServoBuddy so you can pull the servo motor and cables out of the seat area, it's unnecessary and the included servo mod is kind of janky
@screennamenottaken24 жыл бұрын
Spy vs. Spy Just curious, in your experience how common would you say warping/degrading issues are for exhaust cans with carbon fiber? I have a 2019 zx6r also but the base model all black bike. I’ve been considering a few different exhausts and pretty much have it narrowed down to either this Yoshi exhaust or the Austin Racing GP2, probably in titanium/carbon fiber. I emailed them a few times with some questions and asked if that was an issue with their carbon options. They said the GP2 is just a carbon fiber sleeve over titanium and has no issues with heat.
@SpyvsSpy-yl9ip4 жыл бұрын
@@screennamenottaken2 The carbon fiber is very high quality. The best i've seen on an exhaust. Very durable and it has a nice tough gloss finish. I also looked at many other exhausts but I am very happy I chose the Yoshimura. Its very solid and high quality, its worth the price. In my opinion it's also the best sounding exhaust i've heard on the 2019 636
@R62009PA2 жыл бұрын
I didn't scroll through all the comments but I wanted to offer a bit of info. The muffler installs behind the rear peg mount, not in front of it. it looks as though you installed it on the outside of the passenger peg instead of behind it. Just an FYI to the viewers. I can say even after installation of the servo plates mine threw a code anyway. Also just an FYI. I ordered a servo buddy. Otherwise, great video and thank you for posting!
@irondiet6831Ай бұрын
Best install video for this zx6r model I’ve seen - Any updates on the power gained
@michaelneal70794 жыл бұрын
Yosh makes the best stuff .
@vinny69354 жыл бұрын
I've got every tool needed except for a 10mm socket. I don't know why those always seem to go missing, lol. Also, that spring puller tool is awesome!
@eastcoastish4 жыл бұрын
Everyone that's ever worked on any Japanese vehicle ever feels your pain.
@Longhardshepard Жыл бұрын
Dude thank you for doing this video what a big help
@eastcoastish Жыл бұрын
You’re welcome!
@mninja636s94 жыл бұрын
Great video beatiful bike man i been waiting for this exact video👍
@oariv4 жыл бұрын
Not bad videos at all man, keep up the good work and you have likes from Jamaica.
@zx6rshane2 жыл бұрын
much needed man thank you
@eastcoastish2 жыл бұрын
Ride safe!
@derekbenoit103 жыл бұрын
Great job at making videos my friend. Keep it up.
@zdrew114 жыл бұрын
thank you, I ordered a two brothers black series and I have the same bike I have to install it on. I'll definitely be using this video as a guide to do so.
@tex-vogue31034 жыл бұрын
great video 👍👍
@rumblemoto75642 жыл бұрын
That stock muffler is huge geezz...
@sub7erorider2074 жыл бұрын
Thanks for sharing 👍🏼👍🏼
@robscherer4 жыл бұрын
Another great video! Just curious why you didn't go with Akrapovic? I like the look and sound of the Yoshi, but I wanted to know if you had other reasons, maybe something I didn't know about?
@jezreelrobin75963 жыл бұрын
Very informative thanks 😊
@eastcoastish3 жыл бұрын
Glad it was helpful!
@Navybro163 жыл бұрын
Did you take off the servo cables or did you leave them on?? If you took them off were they hard to take off and if you ended up going back to stock were the cables hard to put back on?
@eastcoastish3 жыл бұрын
I took them off and have left them off. They were easy to remove, probably not too hard to put back on.
@sheanneericcabantac66169 ай бұрын
Followed this vid step by step. Thanks, this was amazing! I had an issue though, my servo motor wont stop turning after installing the servo blanking plate. No check engine light, exhaust was installed properly. I ordered a servo eliminator already but eta is 3 weeks. Any temporary recommendations?
@JinxedHer3 жыл бұрын
does anyone know the difference between this and the alpha 2?
@luismendez10404 жыл бұрын
Great video. Thanks
@AKrush954 жыл бұрын
Hey, awesome videos. Do you have a link to the exhaust?
@AvaSara102 жыл бұрын
Two years later it’s 2021LOL I just bought actually got as a present the same bike as you and the same exhaust as you I followed your video step-by-step it worked out perfect I want to thank you for your detailed video however my check engine light is on and I’m curious to know why would set that off and what might fix that
@eastcoastish2 жыл бұрын
Congrats on the bike! You installed the mechanism that tricks the servo to think the stock exhaust butterfly valve is still there? Have you put some miles on the bike to see if the code clears? If you did install correctly and have put some miles on the bike, easiest solution is to throw a servo buddy on there, I did a video on that too: kzfaq.info/get/bejne/a76ni5iQ3M_Uf6s.html good luck!
@AvaSara102 жыл бұрын
@@eastcoastish thank you so very much for getting back to me I do have a question can I still ride the bike with the light on until I get that item shipped to me?
@eastcoastish2 жыл бұрын
@@AvaSara10 yes, shouldn't be a problem and honestly the code may clear on its own. Some of the codes just require x miles of non-code throwing to clear itself. Ride safe!
@AvaSara102 жыл бұрын
@@eastcoastish I just wanted to thank you so very much for all your help and advice I ordered the server buddy installed it and after about 100 miles the engine light went off it was kind of weird it didn’t work at first I was really upset but after about 100 miles it went off and has not come on again
@eastcoastish2 жыл бұрын
@@AvaSara10 awesome, ride safe!
@Bukovphilip7 ай бұрын
Does anyone knows if Yoshimura alpha from zx10r 2019 would fit zx6r?
@CoDGamer55872 жыл бұрын
does installing only the muffler at the end simpler? i know it wont give the same result but i saw a couple of videos where people only remove the 2 spring and swap the end of the exhaust( the yoshi and carbon fiber end) and i was just wondering if you could of done that with that exhaust on this bike??
@JukinJiga4 жыл бұрын
damn sounds great!
@hubi1434 жыл бұрын
hey dude, i have not done the first service on my bike. do i need to wait for the first service before installinf the pipe? or can i just install it? thanks
@eastcoastish4 жыл бұрын
The first service is really just an oil change and checking things out. No problem installing the pipe now.
@hubi1434 жыл бұрын
eastcoastish thanks bro for your tutorial video i sucesfullu install my pipe, but i did not know the gasket is so soft so i crack mine when tightning the clamp.
@samAllOber2 жыл бұрын
Can you use this exhaust without replacing the stock resonator with that mid pipe? Looking to get a better sound but not too loud, thanks!
@ZVManning3 жыл бұрын
I have a 2020 r3 and that servo motor shit is interesting lol.. glad I didn't have that. But I am trying to upgrade to a 2019 z6r so I imagine I'll fuck with it soon
@leonpabrekar24064 жыл бұрын
i have done the same thing to my zx6r 2019 but i also have cat delete the sound is so great and you can look at my video how its sound on dyno. have fun with the new yosi on your bick
@leotee60633 жыл бұрын
just installed my yoshimura on my 636 and sounds great ! everything went smooth only question is , the stock gasket you re-used was it still attached when removed the old unit? i didn't see one when i took off.. just slid the piping through , explains maybe why it smoked a little when first turned it on? didn't after a second, third time. haven't ran the bike sounds good waiting on some fenders wraps if could please let me knw if install was done correctly! thanks bro
@versatile67148 ай бұрын
This. Please help
@brunocarvalho2674 жыл бұрын
muito bom, top
@benn11814 жыл бұрын
Based.
@doone53034 жыл бұрын
sounds almost as good as my 1999 ninja 20 years later
@jsmith48443 жыл бұрын
What did you do with the Servo Cable? or the cable at the bottom where it was connected to the factory exhaust? Did you connect it to Yoshimura Alpha 3/4 exhaust? Did you get rid of it all together? It feels like that part was edited out. Thanks, great video. I appreciate this.
@eastcoastish3 жыл бұрын
I mentioned at the end of the video that I will be pulling all of the cables out. I didn't show it, but i just routed them out and tossed them.
@HungNguyen-zw7bt2 жыл бұрын
@@eastcoastish what is that cable hanging at the bottom? Is it O2 sensor or something else?
@xnick184298x2 жыл бұрын
Did you have to do anything else to the bike (ie tune it) following install?
@eastcoastish2 жыл бұрын
Yes, I installed a Power Commander V and had it dyno tuned. It's not required but definitely gets the most out of the exhaust and helps shape the power curve.
@HeartBreakJ133 жыл бұрын
I’m looking to buy a 2019-2021 Kawasaki ninja 636 and I can’t find an under the seat muffler mod. What is it called?
@scienceofone4 жыл бұрын
I have the same exact bike, which model Yoshimura is this, sorry but I don't know much about it. Also I looked on ebay but it only shows the muffler, whereas you remove both sections, the muffler and the pipe under the bike, so I'm a little confused as to what I need to buy exactly. I loved your video though as I wanna do the exact same thing. Also is changing the servo a must?
@eastcoastish4 жыл бұрын
You can buy it directly from Yoshimura: www.yoshimura-rd.com/products/kawasaki-zx-6r-2019-street-series-exhaust-14642cp520 This is the "three-quarter" exhaust as opposed to the "slip-on" which is just the muffler portion. You must either use the servo bracket that comes in the Yoshimura kit, or do the Servo Buddy which was much easier and cleaner: kzfaq.info/get/bejne/a76ni5iQ3M_Uf6s.html
@crista1ful3 жыл бұрын
What did you do to get rid of the wires on the bottom of the nike?
@shawnkurtisTV2 жыл бұрын
Question: I’m installing a M4 GP19 slip-on onto my 2021 ZX-6r and I’ll be eliminating the cat-converter along with adding the servo buddy. With that being said, is a flash needed? Does it ruin the bike in any way if I go without doing this? Lmk! Appreciate it!
@eastcoastish2 жыл бұрын
If all you're doing is adding the exhaust, you don't need a flash or Power Commander V or something similar but it will help get the most out of your exhaust. You won't do any damage though - exhaust alone won't lean out the mixture enough to make a difference.
@josephjoestar5444 Жыл бұрын
What the difference with this and the alpha T2???
@Fee.13 жыл бұрын
What did you record this on? And what did you use for sound recording ?
@eastcoastish3 жыл бұрын
Sony Alpha 6400 with Sigma 1.4 Art Lens and Rode mic
@shaft4454 жыл бұрын
Don't you need that converter to pass inspection?
@eastcoastish4 жыл бұрын
There's no inspection in FL.
@tricky_d16723 жыл бұрын
How long did it take to install?
@eastcoastish3 жыл бұрын
About an hour or two? It would be much quicker the second time, but I was being careful as I figured it out.
@1johnnyangel3 жыл бұрын
I prefer the M4, at least for my likes. Nice video though.
@eastcoastish3 жыл бұрын
Which M4 do you have? I just ordered the slip on so that I can delete the passenger pegs.
@1johnnyangel3 жыл бұрын
@@eastcoastish slip on. Check it out on my other channel THAT915GUY
@tommysbk29194 жыл бұрын
I’ve just ordered mine! Seen this video a few times so just rewatching to familiarise myself! With the servo cables did you just pull them out? Or hide behind the fairings
@eastcoastish4 жыл бұрын
I pulled them out, they're pretty easy to remove.
@tommysbk29194 жыл бұрын
eastcoastish sweet, thank you can’t wait till it’s on!
@tommysbk29194 жыл бұрын
Did you get any Engine warning lights after installing it? Or does the servo think it’s still got the stock exhaust on
@eastcoastish4 жыл бұрын
@@tommysbk2919 the servo thinks the stock exhaust is still there. I've also since installed the Servo Buddy to remove the servo altogether.
@tommysbk29194 жыл бұрын
Yeah I seen the servo buddy video I’m thinking of getting that too! Thanks for your replies
@versatile671410 ай бұрын
Can I use this as a guide for install on a 2024 zx6r? Or is the install different??
@eastcoastish10 ай бұрын
Should be the same…
@versatile671410 ай бұрын
Here’s to hoping! Thanks for this vid. Gonna pull the trigger and the exhaust ordered.
@sxberia__35822 жыл бұрын
Would you need an ecu flash after installing something like this ?
@eastcoastish2 жыл бұрын
ECU flash or power commander
@sxberia__35822 жыл бұрын
@@eastcoastish what did you go with?
@topx2698 Жыл бұрын
whats the decibel on this sir?
@crxpzii99674 жыл бұрын
I just installed a aftermarket exhaust and my CE light is on do I have to buy a servo buddy?
@eastcoastish4 жыл бұрын
If you don't install the mechanical servo attachment like I did in this video, then yes, you need a servo buddy.
@chernobyl95564 жыл бұрын
Hey I was wondering is it a yoshimura alpha t slip on? Is it the regular or the race one cause they have like 3 different ones and idk what’s different wise
@eastcoastish4 жыл бұрын
I have the three quarters exhaust so it uses the factory headers but replaces the midpipe (so no cat) and the new can. Model number is 14642CP520
@chernobyl95564 жыл бұрын
eastcoastish oof thanks for the quick response I greatly appreciate it! And I’m most likely to get it real soon! But in the purchase order it did say yoshimura alpha t works slip on?
@PetaBread274 жыл бұрын
Is the Yoshimura exhaust ridiculously loud or just a deeper grunt? This morning I put the M4 GP on my ZX6R and I feel it is way too loud, it screams even at idle. I even thought the stock exhaust was loud, but I mainly wanted the weight savingfs.
@eastcoastish4 жыл бұрын
It's definitely louder than the stock exhaust, but I'm really pleased with the sound. At what RPM are you idling at? i'm at about 1k-1.5k...
@PetaBread274 жыл бұрын
@@eastcoastish The same rpm, this is my first 600cc so maybe Im new to the loudness. But still, it is LOUD. Great sound, but just loud. Im somewhat concerned about my neighbors getting pissed but I guess I shouldn't care. Lol
@PetaBread274 жыл бұрын
And the baffle is still in.
@eastcoastish4 жыл бұрын
@@PetaBread27 I think that's just how these 600 bikes are supposed to sound :)
@bradstricklamd9764 жыл бұрын
I just bought my Yoshi, besides the servo, is there anything else I will need to adj? My buddy is saying I will need a power command block or something like that. Basically it will be throwing codes if I don't get it.
@eastcoastish4 жыл бұрын
The metal pieces that fool the ECU into thinking the exhaust valve is still there (which is included in the kit) is all you need. You won't be throwing any codes. I do recommend a power commander if you're looking to tune the bike, but everything should run fine without one.
@bradstricklamd9764 жыл бұрын
@@eastcoastish ok thanks, my buddy has told me that I needed one, I'm not into track days yet so as long as it is not throwing codes I'm good
@irvingramiro5183 жыл бұрын
I live in Florida, am getting a brand new 2021 zx6r and I want to install this exhaust, do you think it’s way to loud ? Or if am going to have any loud noise ticket or problem or I should be good ????
@eastcoastish3 жыл бұрын
You should be good. It's not obnoxiously loud and I've never had a problem with cops here in FL.
@irvingramiro5183 жыл бұрын
@@eastcoastish thanks for replying, then the Yoshimura exhaust is the one to go for me 🔥
@shawmorgan96364 жыл бұрын
Can the resonator stay on the bike for a smoother sound
@eastcoastish4 жыл бұрын
No, but the kit did come with an insert if you're looking for a quieter sound.
@Deno40764 жыл бұрын
Did that T25 come with the kit or did you already have that bit??
@eastcoastish4 жыл бұрын
I already had it.
@Deno40764 жыл бұрын
eastcoastish after I saw your other video with the servo buddy I’m just gonna get that. Especially if I’m not going to need the servo once I change exhaust out.
@hubi1434 жыл бұрын
hey dude is removing catalyc converter need any kind of tuneup? or power comander?
@eastcoastish4 жыл бұрын
I installed the power commander v. Not required but it makes a noticable difference in the power curve / delivery.
@hubi1434 жыл бұрын
@@eastcoastish thanks bro for quick reply
@ademiltoncarvalho3 жыл бұрын
top pena que aqui no brasil não tem e se tivesse seria muito caro
@erickoponseca15904 жыл бұрын
Can u buy those things separately on the servo motor?
@eastcoastish4 жыл бұрын
You mean the pieces that came with the Yoshi kit? I've since switched to the Servo Buddy so I'm not using those pieces anymore. Drop me a line at kent@eastcoastish.com...
@gamervi61083 жыл бұрын
Slip on or full system and have you did any engine twining
@eastcoastish3 жыл бұрын
It's a 3/4 (factory headers) and I have the PC V tuned on a dyno.
@crista1ful3 жыл бұрын
And the top one?
@LB-ym1qw4 жыл бұрын
How loud is it?
@godwinmartin34114 жыл бұрын
Which tool u r using send tool box link
@shizukodream2 жыл бұрын
so I guess u don't need the servo buddy then?
@prestongonzales46573 жыл бұрын
My engine light came on after I installed it. How do I fix it?
@eastcoastish3 жыл бұрын
Did you install servo mechanism that came with the kit or the Servo Buddy?
@prestongonzales46573 жыл бұрын
@@eastcoastish the mechanism that came with the kit. I think when I took the T25 bolt off I think the mechanism moved a little so when I put it on it wasn't lined up right?
@shashwotmotovlogssf46463 жыл бұрын
I changed my exhaust exactly like you did but my check engine light is here. What do I do now?
@eastcoastish3 жыл бұрын
There may be a problem with servo mechanism not opening /closing the valve correctly. Have you driven it around for a few miles to see if it goes away? I never got a check engine light, but I did end up installing a servo buddy which may solve your problem: kzfaq.info/get/bejne/a76ni5iQ3M_Uf6s.html
@shashwotmotovlogssf46463 жыл бұрын
@@eastcoastish Thank you so much. Really appreciate it drove few miles now its gone. ATTENTION THIS VIDEO IS REALLY HELPFUL 🔥.
@nicholascoccoluto67052 жыл бұрын
Does it throw a check engine light after installing?
@eastcoastish2 жыл бұрын
No, if you put in the servo mechanism in the kit it tricks the ECM to think it still has the working valve. You can also use a Servo Buddy which I eventually switched to as well.
@xnick184298x2 жыл бұрын
@@eastcoastish So the servo mechanism is included in the kit?
@xnick184298x2 жыл бұрын
@@eastcoastish What’s the benefit to using a servo buddy over the one included in the kit?
@eastcoastish2 жыл бұрын
@@xnick184298x takes up way less space that I now use for a power commander, lighter and simpler.
@shashwotmotovlogssf46462 жыл бұрын
I had installed same exhaust a year ago I thought everything sounded normal no power lagging no check engine light nth but I stopped by a local motorcycle shop they said am running on only 3 cylinder because of the exhaust and recommended me a power commander and new spark plugs. What are your thoughts on that?
@eastcoastish2 жыл бұрын
I’m running a power commander. The exhaust alone wouldn’t cause you to run on 3 cylinders though…
@shashwotmotovlogssf46462 жыл бұрын
@@eastcoastish umm that what I thought but the mechanic said that any recommendations what should I do now because scared to ride don’t wanna ruin my engine.
@shashwotmotovlogssf46462 жыл бұрын
@@eastcoastish do you use instagram?
@eastcoastish2 жыл бұрын
@@shashwotmotovlogssf4646 you need to find out why that one cylinder isn’t firing. New plugs are cheap, if it’s not the plugs you need to check compression and fuel injector. The exhaust is not the problem.
@eastcoastish2 жыл бұрын
@@shashwotmotovlogssf4646 yep, @eastcoastish
@mikemays86224 жыл бұрын
Cables just come straight out?
@eastcoastish4 жыл бұрын
There are some tight spaces, but I don't remember having to take off any fairings.
@matthewfuller60484 жыл бұрын
Do you have the link where you got that?
@eastcoastish4 жыл бұрын
I think i bought mine from eBay, almost everyone has them for about the same price.
@meza52074 жыл бұрын
i'm between this or the gp19 M4
@eastcoastish4 жыл бұрын
Both sound great!
@that915guy24 жыл бұрын
I got my 2018 last year and put an m4 exhaust slip on and other mods you might like check out my videos.
@mazt50362 жыл бұрын
How can i get that exhaust?
@eastcoastish2 жыл бұрын
Ii bought mine at revzilla
@mazt50362 жыл бұрын
@@eastcoastish thanks
@williamdolezal91843 жыл бұрын
Just have your ecu flashed and you can get rid of the servo without error codes and no servo buddy
@eastcoastish3 жыл бұрын
The servo buddy is only $50, I assume a flash would cost at least that much...
@ThecomidicGamers4 жыл бұрын
I followed the process step by step but my check engine light is on
@eastcoastish4 жыл бұрын
Was it on before you started or came on after the install?
@ThecomidicGamers4 жыл бұрын
After the install
@jsmith48443 жыл бұрын
How did you get the bolts of the pre chamber loose? Those bolts are very hard to unscrew. You made it look so easy. That's very misleading. If your going to make a how to install video, be honest and thorough with the details and challenges. Don't be misleading.
@eastcoastish3 жыл бұрын
My bike was brand new so it could be that yours were harder to remove from the heat cycles it's gone through or something; mine weren't particularly hard to remove.
@ChickenNuggetsAndFries4 жыл бұрын
Whenever you twist on the throttle, that little valve motor under the passenger seat initially opens/closes the valve in the stock exhaust. Now that you have removed it and bypassed it, I'm curious to how it works every time you twist the throttle since now it looks like it's forcing itself to one side. Can you check it out and let me know if it looks like it will break down eventually??? Thanks in advanced!!
@eastcoastish4 жыл бұрын
I only had the mechanical bypass on for a while, but I did not notice any issue with it at all - everything felt the same as before. I've since installed the Servo Buddy and have removed the motor and cabling - but again, from the throttle perspective, it all feels the same.
@ChickenNuggetsAndFries4 жыл бұрын
@@eastcoastish Ohh okay! And just realized they sell a servo buddy lol bet it gave you a ton of needed space underneath the backseat. Also, did you add a power commander after installing the slip on? If not, did you notice any loss of power in the low or mid range RPM's? Or any back fire at all?
@eastcoastish4 жыл бұрын
I did the servo buddy and power commander and dyno tune. Check them out here: kzfaq.info/sun/PLBC1vXtmelftqM-J25LRPbXAOTxV0ObtQ
@kuldeepchaudhary65134 жыл бұрын
Price?
@eastcoastish4 жыл бұрын
About $600
@godwinmartin34114 жыл бұрын
Tell tool box name
@eastcoastish4 жыл бұрын
Which toolbox are you referring to?
@supermotobro10664 жыл бұрын
You
@eastcoastish4 жыл бұрын
Me.
@drewkawi6364 жыл бұрын
Us
@Paradise2Paradise3 жыл бұрын
17:18 thank me later
@Comirida14 жыл бұрын
Next step id say is to remove the cat from the mainfold