Easy Ceramic Coating For Paint And PPF - How To Apply GYEON MOHS EVO

Easy Ceramic Coating For Paint And PPF - How To Apply GYEON MOHS EVO - TESBROS

Рет қаралды 10,007

Күн бұрын

GYEON MOHS EVO is easy to apply and is the perfect PPF upgrade to keep those hydrophobic properties longer. PPF that comes pre-coated usually lasts 3-6 months, whereas this coating will last 3 years. Follow along to learn how to prep and apply MOHS EVO as we do on a Tesla Model Y, as well as see a comparison between non-coated and coated areas.
- MOHS EVO: tesbros.com/products/gyeon-q-...
- MOHS EVO Basic Bundle: tesbros.com/products/gyeon-q-...
- MOHS EVO Ultimate Bundle: tesbros.com/products/gyeon-q-...
---
DIY PPF Front Kit for Model 3: tesbros.com/products/diy-fron...
DIY PPF Front Kit for Model Y: tesbros.com/products/diy-fron...
DIY PPF Free Courses: courses.tesbros.com/
---
0:00 Why get Gyeon MOHS EVO?
2:33 Prep PPF for application
4:14 Last minute prep
5:31 Application process overview
7:00 Apply MOHS EVO
10:20 Testing MOHS EVO properties
---
WHAT YOU NEED:
- MOHS EVO
- Gloves
- 70% iso alcohol
- Microfibers: tesbros.com/products/waterles...
- ***You need ONE applicator per install, then throw away. If you need more applicators for different days of install - gyeonusa.com/collections/appl...
FOR CAR WASH:
-Wash Bucket
-Grit Guard (optional): tesbros.com/products/bucket-i...
-Pressure washer or hose
-Car Shampoo: tesbros.com/collections/clean...
-Wash Mitt: tesbros.com/products/wash-mitts
-Prep Wash: tesbros.com/products/prep-wash
-Clay Bar: tesbros.com/products/clay-bar
-Brush Bundle (Tire, Wheel, and Boar) : tesbros.com/products/brush-bu...
-Blower (optional): I recommend egopowerplus.com/power-blowers/
-Drying Towel: tesbros.com/products/drying-t...
----
Related or Mentioned Videos:
- How to prep your car before installing vinyl, ceramic coating, or PPF: • How to Prep Your Tesla...
- How to wash your car using the two-bucket method: • How To Wash Your Tesla...
- How to protect your Tesla interior vegan leather with Gyeon LeatherShield ceramic coating: • Ceramic Coating Tesla ...
- How to apply Gyeon QuickView rain repellent: • Gyeon QuickView Rain R...
- How to Maintain your Wheels with Gyeon Rim: • Ceramic Coating For Te...
---
Please subscribe for videos every week! kzfaq.info?sub...
___
Build your Tesla with our style customizer ➡️ tesbros.com/collections/custo...
Clean your Tesla with top car care products ➡️ tesbros.com/collections/all-t...
Protect your Tesla with top Paint Protection Film (PPF) DIY Tesla Accessories ➡️ tesbros.com/collections/all-t...
Customize your Tesla with top vinyl wrap DIY Tesla Accessories ➡️ tesbros.com/collections/all-t...
Accessorize your Tesla with mats, organizers, & more ➡️ tesbros.com/collections/all-t...
Get 10% off your first order at tesbros.com/ with code TESBROS10
---
Our Shop - tesbros.com
Facebook - / teslabros
Twitter - / teslabros
Instagram - / teslabros
Email - support@tesbros.com
---
This video and design is protected by the U.S. and international copyright laws. Reproduction and distribution of this video for commercial purposes without written permission from TesBros LLC is prohibited.
#tesla #teslacar #teslamodely #ceramiccoating #gyeon

Пікірлер: 44

@tesbros Жыл бұрын

Would you ceramic coat your car yourself or go to a pro?

@nullpunkt8660 10 ай бұрын

Do it myself 😎👍 I wraped it myself I ceramic coat it myself ❤

@M3_86 7 ай бұрын

@@nullpunkt8660me too.

@dereklee4736 3 ай бұрын

I have applied countless mohs on cars in a region with high humidity and 28-32degrees ambient temp. Can share tht if you leave Mohs on without wiping or leveling for more than 5-10minutes, you can either dab/drench the high point and try wiping it away. Above 15mins its most likely mechanical intervention or apply a small bit of compoung on a sponge n try to remove the high point if its on a small area. Hope this helps the community here. Have a great day all!

@nguyenam1 9 күн бұрын

Wow you guys always have the exact video I need! I've been a subscriber for 3 years! Keep up the good content!

@tesbros 9 күн бұрын

Happy to help! Thanks for the kind words! 😄

@toanoi Жыл бұрын

Yo! Great video. Very detailed and informative. Keep them coming! 👌

@tesbros Жыл бұрын

Appreciate it, and glad it was helpful!

@bhargavchoppakatla1836 Жыл бұрын

Waiting for my Model Y. Been binging your videos for few weeks now :D Can you do a short video on which anchor points you recommend for the new Teslas without the ultra sonic sensors? Will be ordering a kit soon once the VIN is assigned. Also do you guys plan on making full body kits for front and rear doors? Would be great to have an option so that I get uniform protection instead of uneven wear after a few years.

@tesbros Жыл бұрын

That's awesome! Congrats! Anchor points for PPF? We have this video here for applying our PPF kit on the bumper without sensors - kzfaq.info/get/bejne/kNiAZbGovaqroac.html. You can go ahead and sign up for the free course here if you want to start learning about our PPF front kit before receiving your Tesla - courses.tesbros.com/courses/diy-front-ppf-kit-for-tesla-model-y/. Yes, we will be offering full body kits later this year, and if you've already gotten the front kit (tesbros.com/products/diy-front-protection-kit-ppf-for-model-y), you'll be able to continue your project with the rest of the full body kit when it launches.

@supremewhip Жыл бұрын

@tesbros have you coated the entire sections of panels with PPF? Gyeon Pure Evo is entirely incompatible with your PPF. I had issues with the coating smearing and not wiping clean on your PPF. I would imagine it’s the same with any non-PPF specific coating because I didn’t have any issues on bare paint.

@tesbros Жыл бұрын

I personally haven't applied Pure Evo to PPF before, so I can't speak to that. I'm sorry you had those issues though as I know what a pain that can be. This one in the video is MOHS Evo and I've never had problems with it being applied to PPF.

@anony7ion133 Жыл бұрын

Hi, can you tell me how much of bulk ppf is sufficient for entite model Y is 1x 1.52x15m of roll sufficient for entire car

@tesbros Жыл бұрын

You can get a full roll - 60x600 inches

@user-im8xy5cf3g Жыл бұрын

If its been a few days to a week since I finished the ppf install (I did the whole car, so some panels are fresher that others) and the car hasn't been driven yet, what's the best cleaning approach? Just wipe it down with a clean microfiber or should I add some tack or anything like that? I'm assuming your waterless car wash isn't a good move since it has wax in it..?

@tesbros Жыл бұрын

I would wash it with a degreaser like our prep wash and then dry completely and you should be good to apply mohs evo. You shouldn’t need to clay bar or anything since the ppf is fresh. Here’s our prep wash (degreaser) - tesbros.com/products/prep-wash

@oscargoverno4696 3 ай бұрын

Quick question, when you apply two layers of mohs how long until you apply the second layer after the first one ?

@tesbros 2 ай бұрын

Once I finish the car, I go back to the panel I started with and do the second coat in the same order and that’s typically enough time in between. So about 45 min to an hour

@Jojo-hr8ps Жыл бұрын

Gyeon has one for matte? Can I use that for stealth ppf or this one? Which one for tire?

@tesbros Жыл бұрын

Yes you can. We have experience with their ppf one but found better success for diy-ers with the mohs. For wheels, use rim. You can find it in our store :)

@Stallion3863 6 ай бұрын

Not sure if it was mentioned but for a model Y which size bottle did you go with? Im sure 30 ml would be sufficient but can you squeeze a second coat on the car with 30 ml or would you simply just go with the 50 ml

@tesbros 6 ай бұрын

We’re using 50ml in this video. I would get that one if you’re doing two coats. Just to be safe. Then if you have some left over, you can put it on the rims too if you want

@nguyenam1 9 күн бұрын

I'm looking to ceramic coat my stek ppf I just had installed. Would you recommend the mohs Evo or PPF Evo for extending the hydrophobic properties of the film? I see there's a big price difference between the 2 and I'm unsure how well the new PPF Evo product compares to the original mohs Evo you're reviewing on this video.

@tesbros 7 күн бұрын

They are both great products. Honestly, you can't go wrong with either as they are very similar! I always use the mohs evo since it's versatile. It goes over paint, ppf, and vinyl really well and lasts about a year longer than the ppf evo.

@KingRockets 10 ай бұрын

Does the MOHS have a darkening effect on the paint and increases the gloss at all?

@tesbros 10 ай бұрын

It does make it glossier and it makes the color pop a bit more. It doesn’t darken

@joseangelgm88 Жыл бұрын

Can you apply this product on the windshield?

@tesbros Жыл бұрын

No, not on windows or glass. We suggest putting QuickView on your windshield - tesbros.com/products/gyeon-quickview - and here's a video that explains more about it and how to apply - kzfaq.info/get/bejne/q7R8m71ns7jQl30.html

@carbonoxx 2 ай бұрын

i live in humid like 85 all the time, will this work?

@tesbros 2 ай бұрын

Yes

@smartitsank 4 ай бұрын

Do you think 30ml mohs bottle is sufficient for two coats on model Y?

@tesbros 4 ай бұрын

I would def get 50ml.

@smartitsank 4 ай бұрын

Thanks@@tesbros

@alfredtolentino8614 Жыл бұрын

Can I ceramic freshly installed PPF?

@tesbros Жыл бұрын

Absolutely! That's the best way in my opinion, before the PPF gets contaminated

@gust9464 Ай бұрын

Mohs new ceramic coatings allows you to go in any direction, cross pattern doesn’t matter according to Gyeon. Mohs actually beads when it’s ready to wipe off. Pure and Mohs are close in comparison. Mohs is slicker and Pure might be better on darker cars but no slickness.

@tesbros Ай бұрын

Yes, love mohs because it's much easier to work with than most ceramic coatings! Very DIY friendly since there's more than one way to apply it and it's pretty forgiving. You don't have to do the cross pattern, but I prefer it because I know I'll get an even coating easily with that method

@BMan100 Жыл бұрын

But how does this differ from the Gyeon PPF coating?

@tesbros Жыл бұрын

This one, in our opinion, is easier to apply. Plus you can put this one on PPF and paint

@BMan100 Жыл бұрын

@@tesbros awesome , what about the skin / synchro kit? Or would the different extra layer be an issue?

@tesbros Жыл бұрын

@@BMan100 to be honest, we’ve never used the synchro or skin. And we never recommend anything we haven’t used. Both mohs and ppf evo can be applied multiple coats. For skin and synchro, I’d check the manufacturing recommendations. Gyeon usually has good guidelines on how it should be used.

@BMan100 Жыл бұрын

@@tesbros Thanks!.... now if I could just find a place to redo the edges on my PFF... I knew something was off when they didn't even trim things correctly that wee in plain view... but I will definitely give this MOHS a try, and due layer it, also would this be safe on Trim and wheels too? ... Challengers are BIG cars so I think I'll need to get the 100ML bottle..