How To Wash & Maintain Paint Protection Film (PPF)

Рет қаралды 51,723

Жыл бұрын

How To Wash & Maintain Paint Protection Film (PPF). Paint protection film is becoming more and more popular due to to the fact it can help protect your paintwork against scratches, stone chips and chemicals. In today’s episode, let me show you how to care for PPF properly!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Gyeon PPF EVO coating: bit.ly/3lVnham
CarPro Skin coating: amzn.to/40s0sKq
Gtechniq Halo coating: bit.ly/3Kpth4P
Gyeon PPF Wash: bit.ly/40L6yoW
Gyeon Tar: bit.ly/40RQ7qS
Gyeon Iron: bit.ly/40ul2K1
Gyeon PPF Maintain: bit.ly/3KnNVSE
Gyeon PPF Renew: bit.ly/3znC4Og
Gyeon CanCoat EVO: bit.ly/3U0PTeN
Gyeon Bathe shampoo: bit.ly/40AR8Ej
🇨🇦 For people in Canada:
Gyeon PPF EVO coating: bit.ly/3lVnham
CarPro Skin coating: bit.ly/3qFon96
Gtechniq Halo coating: bit.ly/3DpYpxH
Gyeon PPF Wash: bit.ly/40L6yoW
Gyeon Tar: bit.ly/3lUuabW
Gyeon Iron: bit.ly/3H7TLpK
Gyeon PPF Maintain: bit.ly/3KnNVSE
Gyeon PPF Renew: bit.ly/3znC4Og
Gyeon CanCoat EVO: bit.ly/3UiMtU7
Gyeon Bathe shampoo: bit.ly/3YGYNA2
🇬🇧 For people in the UK:
Gyeon PPF EVO coating: bit.ly/3G8KooV
CarPro Skin coating: bit.ly/3TVP6Mt
Gtechniq Halo coating: amzn.to/3zlkNoH
Gyeon PPF Wash: bit.ly/3Knq45s
Gyeon Tar: bit.ly/42XWt9Y
Gyeon Iron: bit.ly/3zpSjud
Gyeon PPF Maintain: bit.ly/3ZxgAZG
Gyeon PPF Renew: bit.ly/3KozKNl
Gyeon CanCoat EVO: bit.ly/3nrAic4
Gyeon Bathe shampoo: bit.ly/3KH5GuD
🇫🇷 For people in France:
Gyeon PPF EVO coating: c3po.link/QWE4acWAzF
CarPro Skin coating: c3po.link/QhbU5JQRgS
Gtechniq Halo coating: c3po.link/QJE3UjaHvN
Gyeon PPF Wash: c3po.link/QW8ZXPxJqT
Gyeon Tar: c3po.link/Qz79gpdX5t
Gyeon Iron: c3po.link/QJEP4bwVcQ
Gyeon PPF Maintain: c3po.link/QphjEzkKCe
Gyeon PPF Renew: c3po.link/QuDzjfpBDS
Gyeon CanCoat EVO: c3po.link/QzfaQVd6JX
Gyeon Bathe shampoo: c3po.link/QxEABwuTsw
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Watch more of my videos:
✅ How to apply a ceramic coating on PPF: • How to apply a ceramic...
✅ How to care for matte paint or matte vinyl wraps: • The Ultimate Matte Pai...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZfaq, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my KZfaq videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
Chapters:
0:01 - Intro
1:45 - Applying protection
5:46 - Washing PPF
7:54 - Quick Detailer
9:50 - Chemical Decontamination
12:09 - Polishing
15:36 - Ceramic protection
17:40 - Final thoughts...
#PPF #wash #detailing #paintprotectionfilm #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

Пікірлер: 299

@PanTheOrganizer Жыл бұрын

⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: Gyeon PPF EVO coating: bit.ly/3lVnham CarPro Skin coating: amzn.to/40s0sKq Gtechniq Halo coating: bit.ly/3Kpth4P Gyeon PPF Wash: bit.ly/40L6yoW Gyeon Tar: bit.ly/40RQ7qS Gyeon Iron: bit.ly/40ul2K1 Gyeon PPF Maintain: bit.ly/3KnNVSE Gyeon PPF Renew: bit.ly/3znC4Og Gyeon CanCoat EVO: bit.ly/3U0PTeN Gyeon Bathe shampoo: bit.ly/40AR8Ej 🇨🇦 For people in Canada: Gyeon PPF EVO coating: bit.ly/3lVnham CarPro Skin coating: bit.ly/3qFon96 Gtechniq Halo coating: bit.ly/3DpYpxH Gyeon PPF Wash: bit.ly/40L6yoW Gyeon Tar: bit.ly/3lUuabW Gyeon Iron: bit.ly/3H7TLpK Gyeon PPF Maintain: bit.ly/3KnNVSE Gyeon PPF Renew: bit.ly/3znC4Og Gyeon CanCoat EVO: bit.ly/3UiMtU7 Gyeon Bathe shampoo: bit.ly/3YGYNA2 🇬🇧 For people in the UK: Gyeon PPF EVO coating: bit.ly/3G8KooV CarPro Skin coating: bit.ly/3TVP6Mt Gtechniq Halo coating: amzn.to/3zlkNoH Gyeon PPF Wash: bit.ly/3Knq45s Gyeon Tar: bit.ly/42XWt9Y Gyeon Iron: bit.ly/3zpSjud Gyeon PPF Maintain: bit.ly/3ZxgAZG Gyeon PPF Renew: bit.ly/3KozKNl Gyeon CanCoat EVO: bit.ly/3nrAic4 Gyeon Bathe shampoo: bit.ly/3KH5GuD 🇫🇷 For people in France: Gyeon PPF EVO coating: c3po.link/QWE4acWAzF CarPro Skin coating: c3po.link/QhbU5JQRgS Gtechniq Halo coating: c3po.link/QJE3UjaHvN Gyeon PPF Wash: c3po.link/QW8ZXPxJqT Gyeon Tar: c3po.link/Qz79gpdX5t Gyeon Iron: c3po.link/QJEP4bwVcQ Gyeon PPF Maintain: c3po.link/QphjEzkKCe Gyeon PPF Renew: c3po.link/QuDzjfpBDS Gyeon CanCoat EVO: c3po.link/QzfaQVd6JX Gyeon Bathe shampoo: c3po.link/QxEABwuTsw

@Lucas_Collins Жыл бұрын

A note to anyone considering getting PPF. For the love of god stay clear of stealerships.. go to a shop that specializes in it instead. I haven't even had mine on a year and its already lifting

@edward1927 Жыл бұрын

Wife got hers at the dealership and they told me they just subcontract it out. So most dealerships aren't doing it in house, just ask who they do it through and then make another phone call to that shop and ask what product they use on dealer cars.

@Lucas_Collins Жыл бұрын

@@edward1927 Bigger ones with collision shops are, but yeah you get what you pay for sometimes.

@daviddin8863 Жыл бұрын

My buddy got his Subaru done by the dealership's guy and I used my detailer's guy and it was night and day difference of what I got for the price. We paid the same amount of money and I got a full hood and fenders he got a partial. Also there were huge gaps and outlines on his bumper.

@07wrxtr1 Жыл бұрын

And: do the ENTIRE hood or don’t bother!!!

@TJZTechShow Жыл бұрын

I had some chemical etch into my ceramic coated PPF. Polishing did not help, but applying heat did! Used a blow dryer and that fixed some water spots and etching. Really loving XPELs 10mm film with self healing

@richardcastillo1027 Жыл бұрын

Hi Pan, I had my black Tesla protected with PPF, and had ceramic coat applied at the same time. I have been using Mckee’s rinse less wash and Armor coat lite from Avalon King as a drying aid since I washmy car once a week. I also use this product as a maintenance polish once a month. Armor coat lite is really simple to remove and leaves a amazing shine and slickness. Thank you for giving me addition maintenance options. Keep up the great videos Pan!

@PanTheOrganizer Жыл бұрын

Thanks Richard!

@silverfoxsilverfox6932 Жыл бұрын

@Pan The Organizer Hi Pan, this was such a timely video, I recently sold my GLA45 and purchased a brand new Mercedes A45S it will be fully covered in ppf with a ceramic coating so exactly the video I needed to see at this point, thanks Pan 👍 Now I just have the long wait for delivery to get over, hopefully time goes quickly.

@richardseem7948 Жыл бұрын

No 1 ever talks about this topic.thanks 4 that good friend

@PanTheOrganizer Жыл бұрын

Thanks Richard. I thought I would shed some light on the topic, and make it easy to understand.

@patrickvennard838 Жыл бұрын

I am really happy with my Expel PPF and Gyeon Certified coating. I am only using Gyeon Bathe and Ceramic Detailer to maintain it and it looks amazing.

@ZingerPuffer Ай бұрын

Hey, which ceramic detailer were you using? Are you still using that?

@anhtuanb Ай бұрын

@ZingerPuffer Gyeon has Ceramic Detailer spray on bottle that you can buy. I just bought one. You can google it up.

@pitanonttongviboon8811 Жыл бұрын

Just had my car wrap in PPF and your videos came out just about right time for me, I will try to look for the product here .

@PanTheOrganizer Жыл бұрын

Cool!

@pitanonttongviboon8811 Жыл бұрын

@@PanTheOrganizer I will ask the shop about their surface prep after delivery to have some base data, I just normal wash with some Meguairs speed detailing.

@christopherbrennan8308 Жыл бұрын

Very timely video for me. Just bought a vehicle with a PPF bra. Will have to pick up that quick detailer to protect it. Thanks from Long Island NY

@PanTheOrganizer Жыл бұрын

Thanks Chris!

@jessiejames2002 Жыл бұрын

Merci beaucoup pour les explications et le découpage complet de chaque étape. On y voit bien plus clair maintenant. 👍

@PanTheOrganizer Жыл бұрын

Merci!

@pinkspark20 9 ай бұрын

Thank you for the details of the products.Any product you would recommend for waterless wash during the winter months to maintenance the ppf

@KonstaNykanen Жыл бұрын

Great tips regarding PPF👌🏻. Fantastic work Pan!

@PanTheOrganizer Жыл бұрын

Thanks Konsta!

@KonstaNykanen Жыл бұрын

@@PanTheOrganizer 👍🏻❤️

@richardseem7948 Жыл бұрын

Another awesome episode of Paaannn the Organizer good friend

@PanTheOrganizer Жыл бұрын

Thank you!!

@adventurebydaddy6829 Жыл бұрын

Hi, can we use Turtle wax hybrid graphene flex wax on ppf for maintenance purposes..

@DaGodfaddah Жыл бұрын

so timely since i just got my car back from getting wrapped yesterday and was about to look for maintenace/cleaning stuff.

@PanTheOrganizer Жыл бұрын

👍🏻

@danielstacy9000 7 ай бұрын

Hi Pan, would you recommend pre washing with a spray foam for my PPF, this seems to be the way forwards for non PPF cars but not shore if this necessary for me? If you do, please could you recommend what products I would need in order to carry out the work. Many thanks. Kind regards

@michaeldoyle5001 Жыл бұрын

Do I follow this exact procedure if my PPF is Ceramic coated? Also, any thoughts on care of a Convertible? Thanks.

@Hikki4Life Жыл бұрын

I was just about to ask you to make a video about this. Thank you for reading my mind!

@PanTheOrganizer Жыл бұрын

😁

@glennarmando39 Жыл бұрын

Pan niche is very Strong 💪 . Always thinking ahead

@robertmercer9117 Жыл бұрын

Informative video, thank you. I have a 2020 Sienna mini van that has PPF applied over Blizzard White and it shows dirt just under the edges on the hood, front fenders and sideview mirrors. Any way to remove that dirt or mildew from under the PPF?

@07wrxtr1 Жыл бұрын

Whomever installed it did a poor job. They should have wrapped it around the edges going under the hood and out of site. You can try cotton swabs and alcohol Just keep in mind that you want it sitting in the sun to get it to bond back to hood after you have cleaned… Once those edges get damaged they’ll start collecting crap constantly

@hitek3943 Жыл бұрын

6:23 CarPro Eraser as shampoo? I think you wanted to say Reset? :)

@philipkeys3638 2 ай бұрын

Great videos as always btw 👍 Quick question? I have a vehicle that has a complete PPF all the car has been protected and it has been installed for about 3 years. It’s in great shape and I maintain it well. The vehicle has extremely low mileage and is kept in a garage quite a lot of the time. Do you have to replace the PPF at some point as I have noticed some people say as the PPF ages it’s more difficult to remove it ? Is this correct. I am concerned about how long the PPF will last before it needs to be replaced for easy enough removal before it becomes too difficult to replace? Any advice of information would be really appreciated Thanks

@MyGuyKirby Жыл бұрын

I have used those Gyeon PPF products, work perfect 👍. Full hood PPF coated with HALO going on 2-years strong

@PanTheOrganizer Жыл бұрын

Thanks for sharing your personal experience!

@johns4407 Жыл бұрын

Halo is GTechniq. So that is the one you have? Have you used the Gyeon PPF coating one?

@MyGuyKirby Жыл бұрын

@@johns4407 I first used Carpro Skin then changed to Gtechniq HALO, BUT USED Gyeon polish and wash products for the PPF

@brianhimmelman420 5 ай бұрын

Pan, I am using gyeon PPF renew on my 5 year old Suntek Ultra … will a simple IPA wipe down remove the Renew Silica before I apply Gtechiq HALO??

@markd2858 Жыл бұрын

Thanks, that is what I needed. Appreciate the videos and teachings.

@PanTheOrganizer Жыл бұрын

Glad to hear it! How did you discover my channel by the way Mark? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@markd2858 Жыл бұрын

@@PanTheOrganizer I searched for DA buffer videos and found yours. Very good quality videos and you obviously know how to detail cars. I like that you keep it simple for guys like me that are just trying to keep our stuff in good condition.

@PanTheOrganizer Жыл бұрын

Thanks Mark! I appreciate the positive feedback. I work hard to create good videos for my viewers, so it's nice to see those efforts don't go unnoticed.

@truthmatters2020 Жыл бұрын

Hello Pan I hope you are having a great weekend. I am wondering if you can do a video comparing 303 Nano graphene vs Gyone can coat. I know they're completely different product but they both claimed a year of protection.

@sweetop 11 ай бұрын

Salut Pan! J’ai un Jeep avec des vitre de plastic (soft top) et je veux les polirs, protéger et je me demandais si les produit à polir pour PPF pourrait fonctionner ou s’il existe d’autre produit spécifique! Merci de nous partager ta base de connaissances!

@janthonyc5749 Жыл бұрын

Great video! What are your thoughts on Xpel Fusion Plus ceramic coating? Xpel is obviously a monster in the PPF world so curious as to thoughts on their coating.

@aryangautam5000 9 ай бұрын

Hey I was wondering I have the PPF evo. Can I apply that to a painted surface or my carbonfiber wing ?

@Liyou1500 Жыл бұрын

Great video as always Pan keep up the good work:) A quick question Nanolex si3d ceramic coating is it something to consider or not?

@PanTheOrganizer Жыл бұрын

Thanks Lian! I did a review of Nanolex products a few years ago here: kzfaq.info/get/bejne/b9WgY5Bo1qzGe2w.html

@baydoe121 Жыл бұрын

ordered the dual CR spotless water system yesterday! Can't wait... my black car is even more excited! #Fwaterspots

@PanTheOrganizer Жыл бұрын

Enjoy a spot free rinse!! :)

@80six30 Жыл бұрын

Hi Pan , I have just had my new vehicle coated and the front clip has PPF with a coating applied as well . This is the first car I have had that is coated and with PPF and it is awaiting the first wash. I bought some KochChemie GSF from OG and I wash wondering if this is safe to use , or should I be using a PPF specific such as Gyeon ? . I would greatly appreciate your advise , and I really love the channel , thanks

@07wrxtr1 Жыл бұрын

Any quality ph neutral wash will work - reset from carpro or gyeon bathe…. Ppf is resilient once cured… My ppf is9 years old and still going strong

@HassanALi-17 10 ай бұрын

Hello Pan, Do you recommend the Film in sandstorm area?

@Static_MK3Focus Жыл бұрын

Great tips Pan! PPF is always a nice thing to have. I do have a question though. Will using CarPro Reset strip away or deteriorate Ceramic sealants like Hydr02 and Wet coat? I've been perfectly fine with GSF, however, $30 a bottle does get a bit expensive over time...

@PanTheOrganizer Жыл бұрын

No Reset won’t hurt those.

@charlie-qm9gz Жыл бұрын

I love the channel I am in New York and take all your advice on how to properly maintain a vehicle .here is what I have done to my truck .I had clear bra .008 cover my entire truck and had a covered with expel ceramic coating fusion plus .and glassparency which gets maintain by the installer once a year. I wash my truck once a week with adams meg foam .and use endless shine fallout iron remover .wipe it down with every wash with Geotech C2 liquid crystal .instead of wiping it down I like to use the griots ploy gloss that recently, showed on your channel, will I get the same or better results .you show two products, that caught my eye .griots foaming wash and foaming poly gloss I thought those to products together would might bring the best results .also purchase after your video wet coat which I will try on my wife car which is ceramic coated .I did get your reply on not stacking to many products on ceramic coatings .I would love to hear your advice to make sure that I am properly maintaining my truck .and since you are the master detailer I know that you will have the right answer. I am a long time viewer and love the channel there always so much detail that you put into your channel.and really would like your opinion on this subject

@aounsflock2071 2 ай бұрын

Hey is gyeon bug and grime safe to use on ppf? Hows ceramic pro top coat for a ppf? Certified installer here in pakistan uses ceramic pro top coat on xpel How long can bird droppings be left on before they leave a permanent stain? I just got xpel ultimate plus installed and ceramic pro top coat. When can i use gyeon ppf renew? Isot necessary to use ppf wash and maintain from gyeon or i can use any detailers or sealants like from kamikaze polish angel?

@mshiladitya86 Жыл бұрын

Hey Pan...have started watching your videos quite recently...great insight...great work...keep it up.. One question..am planning to do a Carpro Cquartz UK 3.0 coating, can I use the turtle wax Graphene Flex wax on top of it for maintenance other than the Reload which I will be using anyway. Thanks..

@PanTheOrganizer Жыл бұрын

Yes

@racker3277 Жыл бұрын

Hi Pan, Great video as usual. Just wondering is there any difference between Restart wash and PPF Wash from Gyeon? Sames as PPF Maintain and the almighty Wet Coat? Is the main difference is the product mainly develop for PPF due to the difference from PPF and Paint because how the product will "stick" to the surface?

@TheBreakfastLover Жыл бұрын

I'm also having trouble finding the difference online, but it seems PPF Wash and Restart Wash serve the same propose, but PPF Wash is formulated to remove more of the contaminants that get embedded in PPF, while Restart is formulated for coatings/clear coat.

@GreatBirdOfHope 24 күн бұрын

Can you use hybrid ceramic sprays on ppf such as meguires, turtle wax etc?

@ken1103344 Жыл бұрын

Comments on Diamond by Body,will that work on PPF? Thanks,

@Jumboloving Жыл бұрын

Hi Pan, would it be ok to wash the whole car with the PPF wash from Gyeon if only the front bumper, fenders, hood, and mirrors have PPF? Or should I wash those with the PPF wash and then switch to my usual shampoo for the rest of the car? Thank you for all your super informative videos by the way, I’ve learned a ton through your videos.

@TheBreakfastLover Жыл бұрын

Gyeon PPF Wash is pH neutral at 7.5, so it's safer than most general car shampoos.

@mikehotaling Жыл бұрын

“No one paid for this video”. Pan.. you paid for this video. So everyone needs to like and subscribe because he brings great content and he can’t do it without the fans.

@PanTheOrganizer Жыл бұрын

Thanks Mike! I appreciate the support. I'm blessed with a great audience and you're certainly welcomed in the Pan The Organizer family!

@mikehotaling Жыл бұрын

@@PanTheOrganizer You are welcome. I’m glad I stumbled onto you channel recently. I’ve wanted to start detailing on the side but been nervous to start. Watching your videos helps figuring out what to use and how to do things very well.

@PanTheOrganizer Жыл бұрын

Great to hear. I'm glad my videos can help inspire people. And since you're planning on starting your detailing business, I have a bunch of cool videos that can help you out. Check these below: ✅ Is detailing really worth it? : kzfaq.info/get/bejne/j9dhdcKGsLTFqaM.html ✅ 20 year old detailer making $130,000 a year: kzfaq.info/get/bejne/nZZoms6oy9yVh58.html ✅ Custom installation of equipment in a mobile detailing van: kzfaq.info/get/bejne/f6qFqsmdna3Rl4k.html ✅ How to start a mobile car detailing business: kzfaq.info/get/bejne/jbxjea2UvMybZ30.html ✅ How to become a successful entrepreneur: kzfaq.info/get/bejne/rbpzmbmeyrPJdaM.html ✅ Mobile detailing truck setup: kzfaq.info/get/bejne/qtR2ncucspq9eqM.html ✅ Things I wish I knew before I started detailing: kzfaq.info/get/bejne/ib-hirWil529l30.html ✅ How to be more efficient at detailing: kzfaq.info/get/bejne/aZlzm8R-y57Ic4E.html ✅ Digital marketing to grow your detailing business: kzfaq.info/get/bejne/Z6mUZrFizJzRg6s.html ✅ How to rank your detailing website on the 1st page of Google: kzfaq.info/get/bejne/prSWn8mpys7UeJs.html

@themachine8009 Жыл бұрын

As always Pan great vid. Is PPF and vinyl wrap the same thing?

@PanTheOrganizer Жыл бұрын

Not the same thing as far as the film technology, but same procedure to wash and maintain them.

@Dehunknown20 Жыл бұрын

Hi Pan! I recently came across your Chanel and also recently got my new car wrapped in XPEL Stealth (matte) PPF and Ceramic Coated, including on tire, break calipers ect, this video couldn’t be more timely so thank you. I have been looking at Gtechnic products initially vs these products that you mentioned, if I were to go with GTechnic would you be able to discuss which are also safe on PPF/Ceramic Coating, more so would you actually be able to do a full maintenance wash video of a car that has full PPF/Ceramic Coated as that I would love to see! Hope to hear from you in the comments!

@PanTheOrganizer Жыл бұрын

Thanks but Gtechniq doesn’t have all the equivalent products in their lineup to my knowledge. You’d have to check their website and do some research.

@endurorideraja6766 Жыл бұрын

Hey Pan, I was wondering if you could make a video a little outside of your normal detailing. Could you try a segment showing the best tips and tricks for keeping a boat looking amazing?

@johndinh2913 Жыл бұрын

It would be about the same as washing a car. They do have specific shampoo and sealants for boats as those have a different base coating, gel coat as to clear coat

@JasminOu-mf2mu Ай бұрын

Professionals have professional knowledge and do professional things

@PanTheOrganizer Ай бұрын

Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@robadams6027 2 ай бұрын

Do you recommend occasional claying of PPF?

@stephenclay6852 Жыл бұрын

Hi pan I’m having the front ppf done on my new. car when it arrives in a few weeks time. I currently use turtle wax hybrid solutions products to clean maintain my current car Is this ok to continue to use as I enjoy the washing and polishing process on my cars. Great videos thanks.

@PanTheOrganizer Жыл бұрын

Yes

@keitharaneta3465 9 ай бұрын

Very helpful video!

@PanTheOrganizer 9 ай бұрын

Glad you think so!

@frankpanzarella9937 9 ай бұрын

Pan, Big Fan of the channel down in Knoxville TN!! I recently purchased a 2018 AMG c43 coupe. The vehicle has a clear bra on the front of the hood (only on the hood) installed by the previous owner. I'm unsure of the age of the PPF/ClearBra. are there some tell tale signs of age that I can look for to determine if it needs to be removed now or later. (vehicle is very well cared for and appears to also have a ceramic coat, at least from the beading I've experience when washing) Thanks for any advise!

@PanTheOrganizer 9 ай бұрын

Hi Frank. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. If the PPF doesn’t seem to peel on edges and hasn’t yellowed or discoloured, it should be fine.

@kphaboutdy Жыл бұрын

Hi Pan, what is the difference between PPF wash and Gyeon restart wash? I’ve been using restart was for my maintenance was once a month. Also should i have Gyeon ceramic detailed or PPF maintain on my car which is PPF and ceramic coated?

@sultanalqemzi7115 7 ай бұрын

Im using geyon ppf wash and yes its same materials in restart and includes iron remover but its more specific for ppf. Also im using ppf maintain spray and its really best for ppf for durability, hydrophobic, slickness and uv protection

@ammobiledetail1017 Жыл бұрын

Thanks for everything brother

@PanTheOrganizer Жыл бұрын

You bet!

@aounsflock2071 2 ай бұрын

I have got ceramic pro top coat on my ppf. I want to remove it and install another coating. How do i remove it?

@ystebadvonschlegel3295 Жыл бұрын

Which brand PPF do you think is best - hope you will say CeramicPro’s version as that’s what I’m planning on having installed on my new BMW

@PanTheOrganizer Жыл бұрын

I don’t really have an opinion as I don’t apply PPF on my cars. I recently replaced the factory PPF on my Porsche’s real wheel arches though and used XPEL. Video to come soon.

@raymondhall8629 Жыл бұрын

Cheers 🥂 pan ❤ the video

@PanTheOrganizer Жыл бұрын

Thanks Raymond!

@tomaszpopko617 2 ай бұрын

Hi Pan, what kind of product would you recommend in case the car is only partially protected with the PPF (front side). I would preferably want to use a single set of products to maintain both the PPF part and the rest of the car at the same time. Is ceramic coating possible to go over the PPF as well?

@PanTheOrganizer 2 ай бұрын

If you applied a ceramic coating over all the exterior surfaces, treat it like a coated car. ;)

@tomdwyer6187 9 ай бұрын

The front of my car has PPF and the rear ceramic coating. I had it done before I found your channel! Next year, I might ceramic coat the PPF. But between now and then, can I use shampoos, cleaners, etc. for ceramic coatings on the PPF? Or PPF shampoos on the ceramic coating. This is just to clean my car every week or so. I guess what I'm asking, what productions for cleaning can be used for both. Thanks!

@Mattty16 2 ай бұрын

How did they turn out mate as I have same question

@usmansarfraz3695 Ай бұрын

Looks like the Gyeon products linked in the description no longer available for US customers?

@calvinchia3235 Ай бұрын

Hi Pan, Some PPF have ceramic coating infused in their surface (Avery Dennison), can we still apply ceramic coating on the PPF? Can ceramic coating be applied on Matte / Satin PPF? Thank you for all your tutorials

@PanTheOrganizer Ай бұрын

You would have to ask your PPF installer if he feels ok with applying a PPF on top of your coating. Normally, it's the PPF first, and then a coating on top of the PPF. Most PPF coatings (like Gyeon PPF, CarPro Skin and Gtechniq Halo) can be applied on glossy or matte PPF. No problem. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@thesamsquatch5224 Жыл бұрын

Excellent video Pan! PPF has a lot of great things happening! Now they have color changing PPF and stuff but still it protects the paint. Its not cheap so it makes sense to protect abd mainain it. Pan does the 911 turbo s have ppf?

@PanTheOrganizer Жыл бұрын

Only the factory PPF on the rear arches.

@thesamsquatch5224 Жыл бұрын

@Pan The Organizer oh wow, it still looks like day one after yvan, Sylvie and yourself put on the roar coating. Its flawless, I don't know how you'll be able to top it

@bchez2314 Жыл бұрын

Hi. Great video. Do you have a video actually showing how way to use these products on PPF ?

@PanTheOrganizer Жыл бұрын

A few of them in this tutorial: kzfaq.info/get/bejne/bbhzmtSVrNjaonU.html For the rest, it's pretty much the same as regular paint. Maintenance is the same procedure (iron remover, extra paint protection with the ceramic spray, etc).

@sahibjyotbhatia9508 Жыл бұрын

Hey pan ,can we use spray sealants or wax like , seal and shine, meguiars quick wax on ppf ?

@PanTheOrganizer Жыл бұрын

You would have to ask your PPF installer to see what is compatible with your specific brand/model of PPF, as there can be limitations, and warranty issues.

@ionutstefan8835 Жыл бұрын

Hi Pan, awesome video as usualy. I have a question, when i aplied Gyon Can Coat the towels used to wipe and buff the ceramic i must trow away theose towels or after i finish i can wash the towels and use them again? Thank you in advance

@PanTheOrganizer Жыл бұрын

Throw them away.

@ionutstefan8835 Жыл бұрын

@@PanTheOrganizer Thank you very much for your advice and for your quick answer. You are the best!!!

@chrissemsch8781 Жыл бұрын

@@ionutstefan8835or you can also use them to clean the wheel wells and for applying your tire coating/shine.

@eclampsium 3 ай бұрын

So, no clay bar on ppf, even if gently aplyed in case of ink bubles?

@dougmillner6800 Жыл бұрын

Hey Pan. Thanks so much for this video. I have PPF on my car for about 2 years, the installer allegedly put a ceramic coating on top of the PPF, but I found out he never did. So last year I prepped the surface with Avalon King IPA wipe down, and applied 1 coat of Avalon King Armour Sheild IX. I use Gyeon Wet after every few washes (after watching your videos). I figure on reapplying a ceramic coating next year. So I should polish the PPF and then put a coat of Ceramic Coating on again? What should be the steps when trying to take off old ceramic off of PPF and then reapplying the ceramic? Thanks!

@AngelMartinez-cf8us 3 ай бұрын

Hello Mr. Pan, I have the following products from Gyeon: Q²M PPF Wash Q²M PPF Renew 1Q²M PPF Maintain and Q² CanCoat EVO Please Can you name it by order number as I should apply it in my full ppf car from the first to the last produt ?

@vasileiospetropoulos2046 Жыл бұрын

Do you need also to clean clay ceramic coating the area before ppf? To. Have better outcome??

@PanTheOrganizer Жыл бұрын

I don’t understand your question. The car is washed, decontaminated, polished, and then the PPF is applied. The ceramic coating is only applied at the end, on top of the PPF.

@danielpilachowski2424 Жыл бұрын

Great video. It appears that I have to order the products online. Are there any over the counter products that are helpful?

@PanTheOrganizer Жыл бұрын

I always order online as I use specialty products.

@AustinCameron 3 ай бұрын

Been trying to find the PPF Wash and PPF Maintain in the US but they all say not available.

@Ecko_Daniel Жыл бұрын

Gyeon it's top notch!

@PanTheOrganizer Жыл бұрын

Thanks for watching!

@curtr.5083 Жыл бұрын

Hey Pan, say you were going to coat a car with Synchro Evo, and part of the car was PPF’d. Would you use the specific PPF coating for the PPF section or would you use Synchro on the entire car. The PPF is coat-able in general according to the manufacturer. Thanks!

@PanTheOrganizer Жыл бұрын

Syncro on the entire car.

@SDEsthetiqueAutomobile 9 ай бұрын

I was just looking for this answer thanks !

@Hassaan17 Жыл бұрын

if I go with a ceramic coat for my ppf, then for the aftercare should I follow the aftercare routine & products for ppf or ceramic coatings?

@PanTheOrganizer Жыл бұрын

For ceramic coatings.

@tonyshenouda4 Ай бұрын

Hi Pan, which one of those works on a matte PPF (Suntek) without adding any gloss? Thank you!

@PanTheOrganizer Ай бұрын

All the PPF coatings mentioned in this video won’t alter gloss on your matte PPF. Gyeon PPF EVO coating: bit.ly/3lVnham CarPro Skin coating: amzn.to/40s0sKq Gtechniq Halo coating: bit.ly/3Kpth4P

@Tigerbergslim 9 ай бұрын

Hey Pan, my car has a full frontal PPF and the rest is ceramic coated. Can I use Gyeon PPF wash on my entire car or just on the PPF ?

@PanTheOrganizer 9 ай бұрын

You would have to ask Gyeon.

@441greenleaf 7 ай бұрын

So ppf maintain is same as gyron wet coat? İ have wet coat, ( orange bottle ) can i use it on ppf securely?

@PanTheOrganizer 7 ай бұрын

PPF Maintain has nothing to do with WetCoat. WetCoat is sprayed on a wet surfaced and rinsed off. Very different from a spray on wipe off product. But yes, you can use WetCoat on PPF.

@SuperAnonymities Жыл бұрын

Hey Pan, I have PPF and ceramic coatings on my car for about 1.3 years now. And I noticed, they've done a good job on damage protection etc, however, it doesn't shield them from water marks. it's a lot more obvious especially on the hood's PPF. I've washed my car weekly, and yeah, my country has a lot of rain. Almost raining every 1-2 days so it's quite impossible to keep the car dry all the time.. Any tips to solve this water marks problem?

@TheBreakfastLover Жыл бұрын

I suggest Xpel Water Spot remover. It's designed for both PPF and ceramic-coated PPF. I use it after every winter to get rid of any traces of mineral deposits and salt. Just spray it on, let it sit for 30-60 seconds, then rinse off.

@SuperAnonymities Жыл бұрын

@@TheBreakfastLover Does that remove the ceramic coating?

@TheBreakfastLover Жыл бұрын

@@SuperAnonymities it does not, as per Xpel (and on the bottle as well), it's intended to be used on both Xpel PPF, and Xpel PPF with Xpel Fusion ceramic coating.

@07wrxtr1 Жыл бұрын

It’s probably just like that CLR stuff you can use in the house for things like showers, shower heads, etc… but probably not as aggressive

@TheBreakfastLover Жыл бұрын

@@07wrxtr1 correct, CLR has a pH of 2, which means it is 100x more acidic than Xpel Water Spot remover (which has a pH of 4). Thus CLR will strip most ceramic coatings, which can typically tolerate a pH as low as 3.

@scottsaia2551 Жыл бұрын

Hey Pan, Have you ever used any of the torque detail line of products? They email me all the time. Thx Pan

@PanTheOrganizer Жыл бұрын

I haven't.

@JC-dc9oz 4 ай бұрын

do you think I could simply just use P&S Beadmaker to coat the PPF for protection and shine ?

@PanTheOrganizer 4 ай бұрын

Yes, just keep in mind Bead Maker isn't used for long term protection. It just lasts 3-4 weeks on average. We usually use it as a topper over longer lasting protection, to boost gloss and slickness. As long as you're willing to apply Bead Maker regularly, no issues. But the best would be to have a PPF coating, and then use Bead Maker as a maintenance type product. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@AbdulWahab-kf1jq 6 ай бұрын

hi i have a question, its been 2 years now i have PPF applied on my car and on top of that i applied 2 layers of Geyon PPF coating, now i feel the hydrophobic properties have immensely diminished thus i want to get my car recoated, so my question is what to do? how do i remove the previous layer on a PPF car and install new layer? Is the procedure same for PPF coated car?

@PanTheOrganizer 6 ай бұрын

The only way to ensure 100% removal of a previous coating is by machine polishing. So a light polish and polishing pad should do the trick. You'll know you succeeded with the removal when the water won't bead anymore, and will simply be a flat pool of slow sheeting water.

@jfv8638 7 ай бұрын

Would you use bilt hamber touchless on PPF considering it his ph level 11-12?

@PanTheOrganizer 7 ай бұрын

Once in a while, just like on paint. Not for every regular wash. Also, as some PPF can be different, check with your PPF installer what is recommended for your specific PPF.

@pierre2324 Жыл бұрын

Can we apply your recommendations from ppf videos to gloss wraps? Else I would like to see a video on car wrap protection (wrap detailers / ceramic)

@PanTheOrganizer Жыл бұрын

What applies to PPF usually also applies to vinyl wraps. :)

@jozefpristic8845 8 ай бұрын

Hi man, thanks for your recomends and tips..and what about claying ppf?? Whats your opinion? Thx :)

@PanTheOrganizer 8 ай бұрын

I would be very careful using a clay bar as those are abrasive and could add marring to the PPF, which you'd have to lightly polish afterwards. It would be better to use a synthetic perforated decontamination towel that doesn't have abrasives. See my video on the future of clay: kzfaq.info/get/bejne/fbFiZNWDtc6Vmqs.htmlsi=AnDVuCFe5xregXr-

@jozefpristic8845 8 ай бұрын

Yop, i see :) thank you

@dlj1285 2 ай бұрын

If I have a car that is fully PPFed and ceramic coated wouldn’t the Gyeon Ceramic Detailer be a better choice than Gyeon PPF Maintain?

@PanTheOrganizer 2 ай бұрын

Yes. Once ceramic coated, treat it like a coated vehicle.

@ga8hp70z Жыл бұрын

Merci Pan, par contre les céramiques liquide ou en spray ne tiennent peut être pas sur les PPF ayant déjà un enduit d’origine comme le xpel Fusion ou le Suntek Réaction. Tu en penses quoi stp

@PanTheOrganizer Жыл бұрын

Il faudrait demander à ces compagnies

@ga8hp70z Жыл бұрын

@@PanTheOrganizer j’ai essayé avec le cancoat Gyon avec éponge micro fibre en passe croisée, l’essuyage était difficile mais ça avait l’air d’accrocher encore plus que sur le vernis d’origine. Je referai une deuxième passe au chiffon plus rapidement. Je n’en n’est pas mis sur le becquet pour constater la différence et remarquer la longévité

@ahumpage Жыл бұрын

Pan, thanks for this. PPF isn't cheap so maintaining it properly is an issue. If I had to pick one it would likely be that Gtech Halo. But I have a question: my QX80 is a tad over a year old. Always garaged, maybe 6K miles a year. I understand about being careful of the PPF edges, but why would I not just use Turtle Wax ceramic spray followed by a graphene spray since I already have them, and, they're fairly easy to apply. I understand they may not last 2 years but as an alternative every 3-6 months, would that not work?

@PanTheOrganizer Жыл бұрын

Yes that would work. As long as you protect the PPF, it's all good. :)

@ahumpage Жыл бұрын

@@PanTheOrganizer Thank you.

@PanTheOrganizer Жыл бұрын

👍🏻

@jamesv9707 9 ай бұрын

Thats what I use all Turtle Wax Graphene Pro products and they work great! No need for ceramic coating as they are prone to water spotting and more difficult to remove.

@jnorse22 Жыл бұрын

Question about pressure washing the car, including the undercarriage. I have a Ryobi 2900 psi pressure washer and a Ryobi water broom rated to 3300 psi. My question is what is too high psi for the undercarriage and what psi would a 40 degree nozzle be. I'm guessing not the full 2900 psi. Thanks.

@PanTheOrganizer Жыл бұрын

I always recommend using 1000-2000 psi max to wash cars

@TheBreakfastLover Жыл бұрын

For PPF, it should be less than 1000 psi around the edges.

@MotoKDub 25 күн бұрын

Been a weekend warrior for detailing but now I just had a new car for the first time ever wrapped - but it’s a matte stealth (Llumar) and will be ceramic coated by the shop (not sure what product). So I think everything I’ve been using and doing on my other car is out the window. This video is no matte wrap specific so is there another video that speaks to that or can someone share products and processes

@PanTheOrganizer 25 күн бұрын

Matte paint, matte vinyl wraps and matte PPF all have the same maintenance, especially once ceramic coated. Here's my matte paint care tutorial: kzfaq.info/get/bejne/m7torcpi0b7aiI0.htmlsi=kO7FxghFfIZ5RLHu Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 1 million subscribers and we have over 140 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@MotoKDub 25 күн бұрын

@@PanTheOrganizerthank you so much. You are doing the lords work here, by far and away my favorite content on the topic

@bobr5274 9 ай бұрын

Hi Pan I just had STEK DYNO shield applied to the hood fender flares and around the windshield of my Jeep Wrangler. Can the products be used on the paint as well? Since I have a combination of PPF and paint.

@PanTheOrganizer 9 ай бұрын

PPF products are only designed for PPF. Most paint coatings can also be applied on PPF.

@bobr5274 9 ай бұрын

@@PanTheOrganizer Thanks for the help.

@PanTheOrganizer 9 ай бұрын

My pleasure! How did you discover my channel Bob? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 940,000 subscribers and we have over 123 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@bobr5274 9 ай бұрын

@@PanTheOrganizer Your channel came up as a suggestion and I found you have a lot of great content. Now iI am trying to figure out what wash products to us with my half PPF half paint vehicle. I will be purchasing CR Spotless DIC 20 on your suggestion.

@vandarkuzhali4580 Жыл бұрын

Hi pan can you recommend me some detailing products, tools, equipments for a detailing setup (by the way its my first time to start detailing) available in India which are cost effective or thats cost effective to start.I need help with that...

@PanTheOrganizer Жыл бұрын

I have no idea what’s available in India unfortunately

@vandarkuzhali4580 Жыл бұрын

@@PanTheOrganizer Oh ok pan.

@DutchSpifire1 9 ай бұрын

Hi Pan, I am a fan of your channel for many years now. I just bought a new car with PPF. Can I use (after a maintainance wash) The last Coat 2 on this? Ore even Black Ice from TLC? Thanks for your reaction! Regards fro Adri, The Netherlands

@PanTheOrganizer 9 ай бұрын

Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. Yes you can use those products on PPF.

@DanielSuru Жыл бұрын

Hey Pan. For protection from "pin-stripping" from bushes/trees when off roading, would ceramic coating offer any protection? Or should I go straight to 100% PPF coverage (XPEL Stealth)? Also, after PPFing and ceramic coating the PPF, would FlowX be ok on top? Thanks!

@DarthFurball 11 ай бұрын

Ceramic won't provide enough mechanical resistance for that. You would need a PPF with enough mils of thickness to provide some protection.

@carlmcdonald2735 Жыл бұрын

I know a guy at work that got his car wrapped And he removed it a few years later and the clear coat came off in the area's is that normal

@PanTheOrganizer Жыл бұрын

It was probably a bad PPF or cheap paint.

@normandlambert6385 Жыл бұрын

J’ai très apprécié cette vidéo je crois qu’elle est très pertinente pour moi mais 2 voiture on un PPF mais je ne comprend pas tout les détails parce que je ne parle pas Anglais penser vous la faire en français pour vos fan je suis sur que serait très apprécié je sais que sais beaucoup de travail. Merci

@partpart2767 Жыл бұрын

Do you teach the training of wrap, ppf, car wash?

@PanTheOrganizer Жыл бұрын

No unfortunately

@Silence07617 Жыл бұрын

Hi Pan, can I clay bar PPF and what speed machine polish should I use?

@PanTheOrganizer Жыл бұрын

In theory, yes you can clay PPF. However, you should be very careful as traditional clay bars are abrasive. Perhaps use a synthetic clay towel, that won't cause marring, something like this: amzn.to/3JHfrtG And make sure you use a clay lubricant. For polishing, you'd use the same speeds as for paint. You start low to spread (speed 2) and polish using higher speeds (5 or 6) depending on what machine you have. Always do some testing on an inconspicuous area first. Or hire a professional detailer if you're unsure of what you're doing.

@Silence07617 Жыл бұрын

@@PanTheOrganizer thanks Pan for the swift reply!

@PanTheOrganizer Жыл бұрын

My pleasure.

@wilmercb 3 ай бұрын

Can you use a pressure washer like a Ryobi 1800psi on a matte PPF? Thanks

@PanTheOrganizer 3 ай бұрын

Yes, absolutely

@wilmercb 3 ай бұрын

@@PanTheOrganizer Thanks

@jeffmccartney Ай бұрын

Has anyone tried the graphene waxes on PPF? Like Turtlewax's new hybrid solutions? (Flex Wax, or Max Wax)

@GreatBirdOfHope 24 күн бұрын

I would like to know about that also 😅

@S2kDude36 Жыл бұрын

What about small rock chips and scratches in the PPF that are dark and look like a paint chip but aren't? Is there a way to make the damaged spot of film look any better?

@PanTheOrganizer Жыл бұрын

If the film is damaged there’s no miracle in fixing it other than replacing it unfortunately.

@S2kDude36 Жыл бұрын

@@PanTheOrganizer Thanks. Was hoping you knew of a trick to remove the dirt that seems to be trapped on top of the film at the point of impact. Probably my biggest complaint of PPF is that rock chips in the film still look like rock chips in the paint.

@moejoe8839 Жыл бұрын

Pan, Rick here. On a previous video for 20 uses for a rinseless wash, you mentioned putting some in your wash bucket to prevent water spots for those of us with hard water issues. Can you mix the the rinseless washes in your video with our choice of foam canon wash shampoo, Mr Pink, Adams, Car Pro Reset, etc to prevent water spots? Thanks.

@PanTheOrganizer Жыл бұрын

Not sure about the use in a foam cannon. You’d have to ask one of the brands that makes a rinseless wash.

@TheBreakfastLover Жыл бұрын

In general you shouldn't mix rinseless washes (which are higher in emulsifiers) with shampoo (which are higher in surfactants). If you do, the mixture will coagulate/clump and you lose the cleaning properties of both. The exception is DIY Detail Rinseless Wash, where Yvan somehow figured out how to make an effective Rinseless with high Surfactants, which is why it also foams in a foam cannon.