Easy Quick Release Vice Mechanism

No video

Easy Quick Release Vice Mechanism

Рет қаралды 891,059

Күн бұрын

My Premier Project Plans: paskmakes.com/...
My Free Plans: paskmakes.com/...
After the feedback I got from my original steel version of this mechanism I decided to make a no weld version. It's made from plywood, is much easier to make than the steel one and works fantastic.
Plans are available here paskmakes.com/p...
As always I'm happy to answer any questions.
Check out my new website
paskmakes.com/
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.thre...
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinp...
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

Пікірлер: 642

@PaskMakes 6 жыл бұрын

Check out my new website paskmakes.com/ The plans can be found there too. :)

@SouthpawDavey 6 жыл бұрын

Love that mate ;-)

@gerritferreira1371 6 жыл бұрын

HujPask Makes ?

@jaiplataify 6 жыл бұрын

Pask Makes

@wildriver39 5 жыл бұрын

Hey I sent a request for the plans and paid through pay pal. I have not heard back from you. What’s up? Tom Knorr

@nathanielharms9931 5 жыл бұрын

Seems like Dodger likes his hoof glue

@theodorwittwenmacher3793 6 жыл бұрын

13:00 it works fantastic and it seems to taste fantastic as well!

@BERNDWERK 5 жыл бұрын

In my opinion, this construction is one of the best workbench-add-ons, I've ever seen. One has to ask, why there are still other constructions on the market. I will buy your plans and built this!

@patricksephton5433 4 жыл бұрын

Hi Neil, i bought your plans for the workbench build mainly for the quick release vice. just completed my build and i have to say it was worth every cent. the plans are clear concise and having watched your video as well it was a fun project. the main thing i had to change was to find a new pin placement for the pin that the quick release unlocks against as i did not have rare earth magnets. the magnets i had were a bit weaker so once i had the pin placement a little shallower it worked like a dream. Thanks very much for all your inspiring ideas. Regards, Patrick in South Africa.

@theExcalibur2 4 жыл бұрын

Your explanations and plans are so good that even a beginer woodwoker like me managed to make the mechanism work. That's make me very happy. Thank you very much! You are an inspiration to people like me. I just saw that I bought your plans for the second time, but I think it's worth it.

@XerfThingol 6 жыл бұрын

You actually do a follow-up based on comments on KZfaq. You adjust your plans for the same reason. Maaaan, that is incredible. Never saw anyone on YT doin that. Pacman was great, i laughed hard. Also puppies are cute!

@PaskMakes 6 жыл бұрын

No worries! :)

@douggarson50 5 жыл бұрын

Great video, I bought the plans and I'm in the process of making a pair of mechanisms to convert my existing shop made twin screw vice. I'm using 3/4" threaded rod as that's what the existing vice was made with. When I assembled them the nut released as it is designed to do but wouldn't re-engage. After a little head scratching I added a second magnet on top of the first, that fixed it and works great! Suggest you add a note to the plans that if the nut doesn't re-engage try a bigger magnet. My first magnet had 9 lb of strength not much less than the one you used which I believe is 9.5 lb.

@rildain76 3 жыл бұрын

The steel version got a like... the no-weld version got a sub. So very cool and much more attainable for the average DIYer! I will build this once I have a table to attach it to.

@woodworkingasquietaspossib8435 5 жыл бұрын

Your discovery and reciprocal consideration has impressed me. I am grateful to you.

@jellekampen4118 4 жыл бұрын

Dear Sir, with every time more admiration I follow your channel. Your explanations are great, nothing to much, just fantastic hand labor. Our compliments from Holland!

@mickpauline6256 6 жыл бұрын

I just found the vid with the steel version of the mechanism and sat down to design a wooden version when this popped up! Well done sir. Great concept, elegant design and thorough explanation - and saved me hours of head-scratching. Worth buying the plans just for that alone!

@PaskMakes 6 жыл бұрын

Thanks Mick! :)

@parapilotalex 6 жыл бұрын

Посмотрел несколько раз видео с вариантом механизма в металле, и это в дереве, не сразу понял основной принцип фиксации, спустя некоторое время после нескольких раз просмотра видео, понимание зафиксировалось основательно. Интересно что работает только половинка гайки. Спасибо за подробное и детальное видео обзора!

@PaskMakes 6 жыл бұрын

Спасибо! Рад, что это имело смысл для вас! :)

@user-eg4vy1si2j 5 жыл бұрын

Долго размышлял, для чего данный зажим. только при внимательном просмотре в самом начале видео , понял. СПАСИБО за идею.

@user-nt8dr5fs9r 5 жыл бұрын

@@user-eg4vy1si2j а я наоборот смотрел видео 11:28 / 14:36 Mini Workbench (Extendable) - Scrapwood Challenge Ep18 и наткнулся на этот механизм , очень понравилась идея, а как воплотить не понял, запросил у автора, ждал ответа пока не увидел ссылку сюда, теперь все в ажуре буду применять, всех с Наступающим и отличных изделий!

@UBO58 6 жыл бұрын

Effective and even easier to make than your full-metal-version! Thanks a lot for sharing!

@waynegilling6048 5 жыл бұрын

you did a great job explaining what, why and how. Super job. this is the first of your videos I have watched but it will not be the last.

@JohnMadeit 6 жыл бұрын

according to the dogs the vice taste nice also :)

@54jb3r7 4 жыл бұрын

woof/10

@brianwalker2112 6 жыл бұрын

I thank you for the 2 videos on this quick release vice. I made a work bench this winter and I wanted 2 vices on it. This will work , thanks again.

@coburnlowman 6 жыл бұрын

Sorry I could only give one 👍on top. This is great. I drew up a push button half nut vise but haven't built it yet because I knew I'd stumble across a simpler one handed vise mechanism and you done the stumbling for me. That one pup reminded me of my late Jack Russell that died at 17 years old. Until he got to old to carry anything he always had something in his mouth hoping to find anyone who would play fetch with. His teeth were worn flat from finding rocks that he wouldn't abandon. I made him a fancy pine casket and all the nearby kids showed up to help dig his grave.

@PaskMakes 6 жыл бұрын

Thank you Phil! You're Jack Russell sounded cool! :)

@agp7073 3 жыл бұрын

Greetings from Cali USA. Always amazed at your skill set, ingenuity and creative abilities. Thanks for sharing and making so many of your designs available on plans for me to make them myself.

@greyshades9114 5 жыл бұрын

Just so cool you made a non welding one. Great concept, even better build(s). Thank you!

@chrisgriffith1573 4 жыл бұрын

This is awesome! I love it when someone makes things for the people that do not weld yet!

@psargaco 6 жыл бұрын

The video is great, but from what you show of the plans, they look absolutely fantastic! Well done!

@salimufari 4 жыл бұрын

Since you have the half nut might as well use both halves and make the shuttle wider to match. You could also do the whole thing out of hardwood ; screw & all. Waxed threads and a blunted acme style thread.

@sincerelyyours7538 6 жыл бұрын

Very nicely done! Now I need a woodworking table on which to mount the vice, and an enclosed space other than my open driveway in which to put the table on which to mount the vise, and a house big enough in which to put the space in which to put the table on which to mount the vice, and the money to buy the house in which to put the space in which to put the table on which to mount the vice -- man, these things are always more complicated than they seem!

@debrhodes7021 6 жыл бұрын

Great video! Thanks for rethinking the design for those without a welding rig and then remaking the device and sharing it in a video. I’ll definitely be buying the plans!

@PaskMakes 6 жыл бұрын

No worries Deb! :)

@joeliwest 4 жыл бұрын

Watched this a number of times and I love - ingenious. Thanks for all the enjoyment you have give me

@manoloykos 5 жыл бұрын

It took me some trial and error effort but it turned out perfect .Thanks

@cabrahao 6 жыл бұрын

Clear like water! Thanks from Brazil!

@striving4awesomeness 4 жыл бұрын

Just found your channel. Best woodworking channel I have found on KZfaq.

@engidu 4 жыл бұрын

Hello Pask, you saved me $ 150 😁 thank you for your detailed explanation. Greetings from Turkey 🇹🇷

@stevenhood6284 3 жыл бұрын

Just re-visited the bench and vice series as I’m finally building my shed and need a decent work bench and I really like your set up.. Great video’s I’ve been following your channel since the roll out drawers in the back of the Ute I think and you’re just getting better and better.

@coreygrua3271 3 жыл бұрын

Nice guys do better on KZfaq and in life as well. It helps when the nice guy is a deep thinker too. Pask is both. 100,000 is just the beginning. Smiling and being a good master to gentle, hungry dogs are signs of nice, by the way. You will have a happy new year, in spite of it all.

@davestinyworkshop Жыл бұрын

Awesome mechanism, thanks for sharing, and loved the Pacman tribute!

@peterwilhelmsson4168 4 жыл бұрын

Closing in on a million subs now! This vice is nothing short of EPIC!

@imortaldeadead 6 жыл бұрын

You are an absolute genius, this is just the best of all worlds. Thank you for sharing and making the plans available on your website 👍🏻👍🏻👍🏻👍🏻👍🏻

@PaskMakes 6 жыл бұрын

No worries! :)

@DonJohn87_YT 6 жыл бұрын

This is definitely one of the best woodworking channels on youtube!

@stellarpod 6 жыл бұрын

Learning to weld is a good thing. I'm in the process of doing that right now. It's a skill that will become a valuable asset in one's fabricating toolset, expanding the options immensely. Nonetheless, this was a very helpful video, proving once again that there is more than one solution to any problem. As always, thanks much for sharing. Steve

@PaskMakes 6 жыл бұрын

No worries Steve! :)

@anthonythomas280 5 жыл бұрын

absolutely well thought out but also described .the dogs are stealing your thunder mate ,love em. thanks TONY T

@davemartin1534 3 жыл бұрын

I've looked at several quick release mechanism by other you tubers and I have come to a conclusion your plywood version is simple and probably easiest to build. I will be ordering your plans soon as I can get out of the house (corona virus ) to buy some supplies. I would love to b of better support but I have to join with the low ball as I'm on a limited income. Sorry but 12$ a year is best I can do right now. I Wii join soon as I get help from my son. BTW I love your photos.

@dannydodge7191 6 жыл бұрын

absolutely. why shouldn't we pay ? you've given us such great ideas and content. I've learned so much because of your great videos. buying your plans along with watching the videos will be worth every penny. thank you and good luck! p.s. love the dogs! from the sound of it one of them has the same name as me.

@PaskMakes 6 жыл бұрын

Thanks very much Danny! :)

@KateMondor 6 жыл бұрын

Nice one! I was really impressed by the previous version, but don’t have welding kit. Glued up the top for my new bench yesterday!

@PaskMakes 6 жыл бұрын

Thanks Katie! Exciting - gluing up a top for a new workbench! :)

@Pjduda1 4 жыл бұрын

I am so glad you made the plywood version. Awesome I want to make one. I started to order your plan it's in the cart, but wanted to check first that I'll receive the plan digitally instant. I'm anxious to get started. Txs dude. Paul

@sstevinn 4 жыл бұрын

I bought it, you do get it instantly. 👍🏼

@benkeller3 6 жыл бұрын

you do a wonderful job explaining things

@PaskMakes 6 жыл бұрын

Thanks Ben! :)

@davidlangston6927 4 жыл бұрын

Great video. I am putting together my work bench/out feed table and this will make a great addition. Thanks

@mcorrade 6 жыл бұрын

thanks again for this. I used your filling down the spanner bit trick which was a great tip!!!!! I always seem to have drills that make the hole or holes too bit but, filling it down works great.

@heuwel 6 жыл бұрын

Great add on to the previous one....Luckilly I am busy making a new proper workbench and I seriously think about making your quick release vice....Thank you

@wizardwillbonner 4 жыл бұрын

I don't know if this was an original idea or something you came across and made. But it is the simplest and coolest most useful idea I've seen in a long long time. Thank you!

@reuvenlewis1975 6 жыл бұрын

Just bought the plans. Appreciate the time and thought. Thanks from Israel

@PaskMakes 6 жыл бұрын

Thanks very much Reuven! :)

@JonasNeumann6 4 жыл бұрын

This mechanism is the best of the quick release mechanisms out there, I love it!

@jotor1870 6 жыл бұрын

Ingenious and crafty!!! You should have it patented

@rsimiao 6 жыл бұрын

It is perfect Pask... For sure I will buy the plans, to support you to create future new content.. All the best!!!

@PaskMakes 6 жыл бұрын

Thank you Roberto! :)

@ZulfikarAbdulaziz 3 жыл бұрын

Hi from Doha Qatar Beautiful idea for a quick opening vice. I'll definitely try it. Subed your channel. A big thank you for this idea 💡

@DesandSam 6 жыл бұрын

Just brilliant! And your presentation style is so relaxed, makes the idea of making this very accessible. 100k subs well deserved. And the rest!

@jean-marc7999 6 жыл бұрын

Very nice project and nice video, clear and pleasant to watch. Thanks for sharing ! Greetings from Belgium

@allankarenbayne9835 3 жыл бұрын

Love the little dogs that was a simple build

@robertwilson7143 5 жыл бұрын

I am planning on doing this and the mini bench. I have purchased both plans. Thanks for your time and hard work.

@markc3717 4 жыл бұрын

Absolute delight - enjoyed your demo & comments. Thanks for putting the time into some plans - much appreciated.

@Bill.L.Carroll 6 жыл бұрын

You rock, man. Great innovation there. Loved the Pac Man rolling across the screen. Your dog sure loves it too... They've grown so fast.

@PaskMakes 6 жыл бұрын

Thanks Bill - glad you liked the Pac Man! the dogs sure are growing! :)

@lint2023 6 жыл бұрын

That was entertaining. Maybe it's called a Pask-Man!

@jeffreymonroe4776 5 жыл бұрын

@@PaskMakes why was your dog licking and biting the vise?

@gebhardt244 4 жыл бұрын

This is like reinventing the wheel ... it is almost impossible but you did it.

@MOJVFRABS 3 жыл бұрын

I've been following your channel for a long time. Very good projects and I just bought your Quick Release Vice Mechanism. I hope that the production will be successful and that it will work like yours. Thank you for sharing your projects and a lot of success in your work. Greetings from Slovenia Silvo

@jonathanayling4378 10 ай бұрын

Thanks for the wood version. Some of that wood is good!

@mariaaparecidacarvalho6530 2 жыл бұрын

Your work is perfect, but the dogs steal the scene! Thank you for the vídeo. From São Paulo, Brazil.💚💛🇧🇷🎄

@jamesaldabo7767 Жыл бұрын

Vous êtes ingénieux , talentueux et avez des mains d'or . Bravo

@stevenmeans4881 4 жыл бұрын

Thanks for a wooden version! Ive seen a lot of quick release vices on youtube while getting ideas to create my own but yours is by far the best! Bought the plans, will be making this soon!

@rushtonpaul1754 6 жыл бұрын

Excellent and very well presented. Love what you share in your videos and the style in which you do it. Thank you.

@DrDrDrick 4 жыл бұрын

Excellent Mechanism, thanks......

@GetHandsDirty 6 жыл бұрын

Oh my god, 100 subs is fantastic!!! That was so quick :D I keep enjoying your content a lot and I am happy for your mark! Going to take a look on the website. And I'm not sure rust is that tasty though ahah, silly Dodge. Oh YES and the Pac man was so awesome!

@PaskMakes 6 жыл бұрын

Thanks very much Cris - really glad you're enjoying it! You had a big input, encouraging me and helping me conquer my fear of talking to the camera - big thanks for that!! Rust must taste nice but I'll take Dodge's word for it! :)

@vernabadenhorst8102 9 ай бұрын

Hey Pak. New subscriber here from Cape Town in South Africa, and I knew it was a good idea to subscribe to your channel. Really love this build, although it seems a bit overwhelming. But hey, you know what they say: you'll never know before you try. And this is exactly what I was looking for. So I might just try it and I'll definitely let you know. Thanks for great content

@theExcalibur2 5 жыл бұрын

NIce project! I just bought the plans and will try to make it. Thank you very much for sharing your experience ! Greetings from Bulgaria.

@oldmanpottering 6 жыл бұрын

Bloody good job Neil!

@CitizenAyellowblue 6 жыл бұрын

Another great project Pask! Puts the vice within my reach as I can't weld. And I really look forward to seeing the Jack Russell's again.. Lost mine recently.

@PaskMakes 6 жыл бұрын

No worries Scott! :)

@zaledalen9931 5 жыл бұрын

Great build. You inspire me to get off my butt and make this. And that takes some doing. So thanks.

@ruforufo2185 6 жыл бұрын

very cool. i also liked your homemade drill-press vice

@Felipera_ 6 жыл бұрын

regular vices are expensive as all hell in my country, let alone quick release ones! I will most definitely be buying your plans once my bench is done! good job.

@Migysuperfly 6 жыл бұрын

i've never bought a set of plans online before,but this one is a temping offer

@g.v.harvey7425 4 жыл бұрын

Why on earth did it take me so long to find your channel? I know that I'm creative, but I don't hold a candle to you. Thanks for great information.

@HaasGrotesk 5 жыл бұрын

Such a complicated function but such an easy solution! You really did great on this one!

@glennfelpel9785 6 жыл бұрын

Outstanding design. Simple but effective. Thank you.

@luthieradp 6 жыл бұрын

Very clever, must try that.

@williamederveen2532 5 жыл бұрын

Thanks, greetings from the Netherlands.

@AverysMan1105 Жыл бұрын

Always very well explained, appreciate the insight

@biekgiek 3 жыл бұрын

I laughed out loud when the dog started licking the threaded rod! Also, that mechanism is amazing.

@diggerdeb 6 жыл бұрын

Great ideas. You're one of the most ingenious makers I've seen on you-tube.

6 жыл бұрын

Fantastic video as always! Awesome mechanism! Your dogs appreciate it too! 🙂

@mitnoxin 6 жыл бұрын

You are a talented man. Great videos, great work and great design. I wish you great success with it all.

@PaskMakes 6 жыл бұрын

Thank you very much! :)

@michaellevi5569 6 жыл бұрын

Pask you r number one

@banusribanu6321 Жыл бұрын

Always you are doing wonder job really simple and best,thanks

@grahamefreestone5309 6 жыл бұрын

Loved the Pask Man at 8:40 👍

@gungan 6 жыл бұрын

Very Very Very Awesome!!!!! Plywood man... I'm shoked

@christophermartin2031 5 жыл бұрын

This is the best channel I have subscribed to yet .

@scorley2011 6 жыл бұрын

that's fantastic thanks so much for taking the time to share

@bluesky6327 6 жыл бұрын

This is a great design! Such elegant simplicity. Your plywood design makes this build approachable!

@YuraKvadrat132 6 жыл бұрын

Sumptuously. You have such brilliant ideas. Every video I watch with great pleasure.

@PaskMakes 6 жыл бұрын

Thank you! :)

@metaborda 5 жыл бұрын

Hi friend! I do not understand English very well, but your contribution is very good, I would like to see it in Spanish

@akquicksilver 6 жыл бұрын

Great video Pask, great instruction and explanations. Well done and thank you.

@pemtax557 5 жыл бұрын

Ingenious ... what a time saver!!

@jimmilne19 6 жыл бұрын

I am using your steel design on my woodworking bench. Fantastic.

@PaskMakes 6 жыл бұрын

That's fantastic to hear Jim! :)

@BernardSandler 6 жыл бұрын

Spectacular. So practical. So doable. Thank you so much for this!

@joshs5313 4 жыл бұрын

..... WOW...... I had no idea this was even possible. And bought plans

@MichelPASTOR 6 жыл бұрын

Awesome! Very clever mechanism and well done video. It is the first video from you I watched. Subscribed !

@PaskMakes 6 жыл бұрын

Thank you Michel! :)

@rtroiani 6 жыл бұрын

Awesome video. And love the JRTs at the end! Apparently that rod is tasty.