Easy Sanwa Button Installation Tutorial - ANY Arcade1Up | Marvel vs Capcom 2

Easy Sanwa Button Installation Tutorial - ANY Arcade1Up | Marvel vs Capcom 2 | MvC2

Рет қаралды 19,355

Күн бұрын

#Arcade1up #FreedMvC2 #MarvelvsCapcom
Here's my recommendation for the best $15 MUST HAVE upgrade for your Arcade1Up Marvel vs Capcom 2 cabinet. Follow along for the easiest Sanwa Button installation with no drilling needed! This mod should also work with any Arcade1Up cabinet as they use the same size buttons for all their cabs.
Easy Sanwa Joystick Installation Tutorial: • Easy Sanwa Joystick In...
Live Stream about various Button and Stick upgrade options: • Options to Upgrade But...
Sanwa Buttons used in this video: Sanwa Buttons: amzn.to/3g5Svse
Links to Various other Sticks & Buttons:
Sanwa Buttons: amzn.to/3g5Svse
Sanwa Gates: amzn.to/3T2Ds0R
Sanwa Springs: amzn.to/3T4PO8W
Industrias Lorenzo IL EuroStick: bit.ly/3gb8iWM
Industrias Lorenze IL Buttons (Convex or Concave): bit.ly/3Tdzu5u
Suzo Happ Competition Stick: bit.ly/3fVRyT2
Suzo Happ Buttons (Convex or Concave): bit.ly/3TdzNNG
MicroSwitches: bit.ly/3CVuVqU
Arcade1Up Factory Upgrades from DIYRetro (sanwa wire harness, Generic buttons, etc): bit.ly/3esvCyK
0:00 Intro
0:23 Section 1: Stock Buttons are Trash
1:22 Section 2: Button Options- Happ/IL Concave & Convex
2:42 Section 3: Sanwa Buttons - Bee's Recommendation
3:34 Section 4: Removing Stock Buttons & Wires
5:33 Section 5: Modding Sanwa Buttons w/ X-Acto Knife to Fit
7:18 Section 6: Reconnecting Stock Wires Into Sanwa Buttons
8:32 Section 7: Final Test on MvC2 Cabinet
If you'd like a FREE Kongs-R-Us Sticker, fill out this quick survey and we'll mail you a few!
bit.ly/3xpYXyr
Check out our Kongs-R-Us Merch Store! kongs-r-us.creator-spring.com/
Music Credit:
Vector U - / vectoru
Some links in this video may contain Affiliate Links where I may earn a small commission at no cost to you!

Пікірлер: 168

@KongsRUs Жыл бұрын

FYI - this mod should be the same process on ALL Arcade1Up cabinets as they use the same sized buttons on every cab that has been released. There's LOTs of colored Sanwa button options. Here's a set of 6 buttons that are $15 at Amazon: amzn.to/3evxOpe (Affiliate link) If you upgrade your cab, let me know what buttons you use!

@StreetPreacherr Жыл бұрын

I CAN'T BELIEVE that 1up manages to 'get away' with cheaping out on the BUTTONS & SWITCHES? Don't these units retail for like $500, and 1up can't even bump their cost by a couple bucks (cents?) on each unit, and install proper 'arcade quality' buttons/switches instead of sourcing generic 'no name' components? It just seems odd to cut costs on the components that users are interacting with EVERY TIME they play, and makes me wonder WHERE ELSE they've cut corners? Like, what are the chances they're also using the CHEAPEST POWER SUPPLIES they can find, and these units will just start failing or catching fire in a couple years?

@wgundammike Жыл бұрын

This is such a great tip Bee! I’ve used a step bit in the past and this is so much less stressful.

@KongsRUs Жыл бұрын

Thanks! Glad it's helpful to folks 😀

@maestr0damus356 Жыл бұрын

Great video Kongs. Honored to say I watched your live stream when you discovered the trick of taking off the little nubs. Finally got my MvC2 cab yesterday and loving it. Gonna order some Sanwas soon! Appreciate all you do boss. Keep up the great work!

@KongsRUs Жыл бұрын

Appreciate the comment! That was a nice little discovery that I'm sure has been around, 😄. Glad more people know about it now!

@darkempire2022 Жыл бұрын

Fantastic video, Bee! I'm definitely going to do this. Very encouraging since no drilling is required. Thank you!

@KongsRUs Жыл бұрын

Great! Thanks for checking it out

@madeincanada1971 Жыл бұрын

This is of the best buttons install videos i have ever seen. I think i’ll give it a try.

@KongsRUs Жыл бұрын

Wow, thanks! Appreciate that and hope it helps!

@mcspeedshop6406 Жыл бұрын

Great video. I started swapping Sanwa buttons into all our fighting cabs about 2 years ago. I felt there was a big difference. Also swapped Sanwa buttons onto the Attack from Mars pinball cab for the flippers. Made a big difference as I always felt there was a very noticeable delay . Happy gaming everyone.

@KongsRUs Жыл бұрын

Yes, these would definitely make a difference in any cab for improved input delay!

@MatticusFinch1820 Жыл бұрын

This TOTALLY worked! Thanks so much. I happened to have an old MadCatz PS3 Tournament edition arcade stick with Sanwa buttons laying around so i just swapped em out and it worked, ill get new sanwa buttons for my MadCatz stick later but for now, the MVC cab plays even better! Thanks B!

@KongsRUs Жыл бұрын

Haha, you borrowed buttons like I wanted to from my MadCatz MvC3 TE stick! Lol, hope you put them back eventually

@skyejoiner 8 ай бұрын

did this yesterday bwcause of this guide! made it super simple and it all worked great. incredibly happier with my mvc2 cab now

@KongsRUs 8 ай бұрын

Glad to hear!

@turdwar Жыл бұрын

Thank you for taking the time in providing this detailed tutorial.

@KongsRUs Жыл бұрын

No prob! Appreciate you watching and commenting

@pixelholix Жыл бұрын

Hell yeah, Thank you so much for the video. I was under the impression I needed to drill the holes bigger and was getting ready to have to do that. Nice to know I can easily just exacto knife the little ridges away. Super simple. Modding min in 2 days now thanks to you. =)

@KongsRUs Жыл бұрын

Glad to help!

@saviorx5615 Жыл бұрын

Keep em coming !!!! This is great !

@KongsRUs Жыл бұрын

Thx forwatching! !

@TheVideoGameNutt Жыл бұрын

Best explanation to get Sanwa buttons in the machine without having to drill for bigger holes

@KongsRUs Жыл бұрын

Thank you! Super simple to do

@castleranch738 Жыл бұрын

Another keeper!!!

@Lastjustice 3 ай бұрын

I am modding a Marvel Super heroes countercade, so this video helped me see how remove the buttons in one piece. I appreciate seeing how it's done. Some of the wires really did not want to come off the switches. I try always take things apart intact when possible so it can be potentially reused by me or someone else later. Part of me want to just cut the wires and be done with it as I couldn't get a couple to separate without some major effort. I eventually got it so I can replace all this hardware with better options.

@boringlifeincanada296 Жыл бұрын

Interesting, thanks for the detailed explanation.

@SaviorGabriel Жыл бұрын

I'll be using Happ buttons on mine, but I'm glad people are finding simple solutions for modding these control panels that anyone can do. It really takes the stress, and worry away from doing these projects. They're well worth doing even if you're someone who's never worked on something like this before, and are a little intimidated by the thought of trying.

@RealziesCuts Жыл бұрын

HAPP is my all time 🐐 As a store manager for Namco Cyberstation I can tell you that here in America that’s what everyone grew up playing on and there was nothing wrong with it 🏆🎮

@SaviorGabriel Жыл бұрын

@@RealziesCuts Indeed, though I'm using them more for the aesthetic to keep the cabinet looking as stock as possible, and to have the feel of an American styled cabinet. I'm just happy to know that should I decide to use Sanwa buttons, I can do so worry free.

@KongsRUs Жыл бұрын

Thanks for the feedback! That was the goal to make this as simple as possible for anyone to do and will greatly improve your game play experience.

@KongsRUs Жыл бұрын

yes, i also love Happ style concave buttons growing up playing these in the arcades. I didn't discover using sanwa buttons until i started playing competitively online with others and preferred the quicker reaction time from them.

@trailbreaker11 Жыл бұрын

Thanks Bee! This was so helpful! 👍🏻

@KongsRUs Жыл бұрын

Glad it was helpful!

@takohma1056 Жыл бұрын

Thanks!! I just got mine in yesterday. Since I own a dozen arcade sticks I have a lot of spare sanwa buttons I can use for this. I can’t believe how horrible the buttons are. The least they could’ve done was put a higher quality button

@FlareGunDebate Жыл бұрын

So cool to know you can shave sanwas to make them fit. Thank you.

@tubinonyou Жыл бұрын

Hell yeah. Just modded it with blue Sanwa buttons with translucent blue outer cases and a translucent blue bat top. I also swapped in a square gate.

@ThePaagshim Жыл бұрын

Thanks for the video kong i wanna do this as well but wasnt sure if i needed to buy new wires . Thanks for clearing it up.

@KongsRUs Жыл бұрын

No new wires needed! This is the easiest mod for sure

@jaredalbin5658 Жыл бұрын

Great video!

@KongsRUs Жыл бұрын

Thank you!

@mattatsu Жыл бұрын

Unfortunately, I tried to do this on my Yoga Flame cabinet and it didn’t work. I can’t even get the button far enough to get to where the nubs were that I cut off. I tried in two holes but it’s way too tight so it looks like I’m going to have to drill the holes a bit bigger.

@elsevillaart Жыл бұрын

Those are the best ones, for retro feel.

@RealziesCuts Жыл бұрын

I would definitely do this upgrade for the sticks and buttons immediately good job and thank you for sharing I shared it to my Facebook page 🎮🏆✊🥇

@KongsRUs Жыл бұрын

great! thanks for sharing!

@StreetPreacherr Жыл бұрын

Yeah, I gutted a full size Arcade cabinet for conversion into a MAME system, but made CERTAIN to keep the AUTHENTIC ARCADE JOYSTICKS (and luckily the cab was a 2player/6button each config). And I'm HAPPY I did, because even the most expensive 'arcade quality' joysticks I've bought from 'arcade component' stores ALL just feel FLIMSY compared to the hardware used in the 'commercial quality' cabinet! I'm actually AMAZED that people are willing to spend $500+ on these units, and 1up can't even provide 'quality' sticks/buttons/switches?!?!? MAME SFII CE!: kzfaq.info/get/bejne/epZyedepmJnPdqc.html Unfortunately I ALSO quickly realized that I don't have kids or enough interested friends to actually PLAY the thing on a regular basis, so it's more of a decoration for the home office now ;)

@MyAssReeks 10 ай бұрын

I just got big blue and sanwa buttons dont go in at all. Strange. Any else have this problem? Others buttons fit that i have happ etc

@jeffwalsh2384 Жыл бұрын

Definitely going with the sanwa... I'll order some up

@KongsRUs Жыл бұрын

Nice! Look forward to playing u again

@jeffwalsh2384 Жыл бұрын

@@KongsRUs I gotta get in some more practice in Mr. 8,000 games its been a while since I've touched mvc1. Gotta find my rhythm.

@KongsRUs Жыл бұрын

@@jeffwalsh2384 lol, all in due time!!

@OliverStonesUK Жыл бұрын

Have you tried the screw in sanwas, as opposed to these clip in type? I imagine they'll hold tighter and apparently are are very solid. If you haven't tried the screw in type, can you think of any reason why they wouldn't fit? Thanks

@miguelarrowsmith421 7 ай бұрын

Where can I buy a wire harness if I damage a wire from the button?

@StefOro23 Жыл бұрын

5:52 once you cut off the Nubs are the buttons unable to fit properly in a regular fightstick?

@cMARVEL360 Жыл бұрын

I had been meaning to tell you how you should make a short clip from your other buttons show, but this is way better! This will change the game for the Sanwa guys and gals.

@KongsRUs Жыл бұрын

Thanks dude!

@carloslimones85 Жыл бұрын

Thank you so much!

@KongsRUs Жыл бұрын

Thx for watching!

@rickym2089 Жыл бұрын

Great work, magic hands! Also I never knew how you button mashed

@KongsRUs Жыл бұрын

Haha, you never played vs games much?

@rickym2089 Жыл бұрын

@@KongsRUs I guess not, great videos!

@MrDream-zm1pw Ай бұрын

My light punch is getting stuck on my newly acquired cabinet. Will probably need to do this!

@kokhen Жыл бұрын

🔥🔥🔥🔥💪💪

@FreelancingBDInstitute1 Жыл бұрын

That's Nice VIdeo

@ToxcynTV Жыл бұрын

Just got mine and have an issue with the start button. The machine sometimes thinks I am holding down the start button so the menu keeps coming up and then gets stuck in a boot loop. I don’t know if it’s a hardware issue with there wire or software.

@KongsRUs Жыл бұрын

Oh, that's definitely weird. I'd recommend opening the control panel from the back to see if you have any visible issues with the microswitches being stuck. If you still have the issue, put in a ticket ASAP with Arcade1Up

@19kfox Жыл бұрын

Great mod BEE!

@KongsRUs Жыл бұрын

Thx Fox!

@youcancallmelarry5620 Жыл бұрын

Will these Sanwa buttons fit into the KI deck as well just by shaving the extra nubs off? Great video, looking forward to a video on changing out for Sanwa sticks as well!

@KongsRUs Жыл бұрын

Yes, this should work on any Arcade1Up cabinet since they all use the same size stock buttons!

@zero705 Жыл бұрын

i just replaced the stock buttons and i dont suck as much as i thought i did, its like a completely different game

@itsmrotaku 7 ай бұрын

Man I wish they would do an online update to this cab and put on the missing punisher beat em up game

@GamerSaeM 7 ай бұрын

I honestly don't mind the stock Arcade1up buttons. I'm able to execute moves and combos with it.

@ericwang8637 Жыл бұрын

Not sure if it is just me, but I tried using 30mm Sanwa buttons today and was not able to push the buttons in. I'm not sure if it is me or not, but when I try to push the button in I get about 1/3 of the way there and the button won't go in any further.

@KongsRUs Жыл бұрын

Did you cut off the nubs like I showed in the video?

@ericwang8637 Жыл бұрын

@@KongsRUs Yea I did, I watched your video multiple times to make sure I didn't miss anything. When I push the button in, I can only get the tip of it in. I'm thinking my holes were cut smaller but not sure

@hairychest1666 Жыл бұрын

Very informative video! Is there a link to sanwa concave buttons that will fit too or only convex?

@KongsRUs Жыл бұрын

Thanks! I don't believe there are any sanwa branded Concave buttons. But these generic 1 piece Concave buttons use the same connections as sanwa and would even the closest thing to Sanwa Concave buttons if they made one.

@DevilKing2138 Жыл бұрын

Would the xacto knife trick work on seimitsu buttons? Never had any of those and wasn't sure if they had the little nubs like sanwas

@KongsRUs Жыл бұрын

I haven't tested seimitsus but plane to order some and do some more testing!

@timladiesman09 Жыл бұрын

Is it necessary to drill in order to fit Happ buttons in an MK30 panel? Or can they fit in the existing holes?

@KongsRUs Жыл бұрын

Happ Buttons should fit thru stock holes no problem

@ThePerceptivision Жыл бұрын

whats better happ or sanwa ? I need to mod my machine because my player one is very late reacting because of the buttons

@KongsRUs Жыл бұрын

It's really more a matter of personal preference. I prefer sanwa buttons and sticks for vs fighting games. Happ Buttons and sticks for classic SF2 and Mortal Kombat

@ThePerceptivision Жыл бұрын

@@KongsRUs awesome I only ordered the sanwa buttons cause just like you I’m tryna play MvC2 on my first cab without the lag, I get a lot of lag

@KongsRUs Жыл бұрын

@@ThePerceptivision unfortunately there will still be some lag with online MvC2, but better buttons will improve your experience overall

@lizard81288 Жыл бұрын

When I was doing this, one of the cords snapped and now it's broken. What do I need to buy in order to fix this?

@KongsRUs Жыл бұрын

You could cut the wire with a wire cutter and splice the wires together, then cover with electrical tape. Here are replacement wires for the buttons amzn.to/3DRIuIn

@lizard81288 Жыл бұрын

@@KongsRUs Thank you! That is what I ended up doing. I was able to save the cord, by cutting the black top and then wrapping it around the conductor and using electrical tape. It works fine. I'll add those to my Amazon list for the future. Thanks again!

@KongsRUs Жыл бұрын

Glad you got it working!

@ryuuken8848 Жыл бұрын

I got my cab yesterday and assembled it. And I had notice that marquee has a tiny hole which leaks a tiny light from the LED behind it. Should I contact arcade1up for a replacement?

@KongsRUs Жыл бұрын

oh no!! yes, definitely submit a ticket and they'll ask for photos. Hopefully the can send a replacement.

@ryuuken8848 Жыл бұрын

@@KongsRUs I also have other issues with it. Like, when I first had it boot up it was stuck at the loading screen so I ended having to turn it off and on again.

@billybatson8657 Жыл бұрын

Has anyone ever done a mod/video on how to rewire a bypass switch to remap the "reverse" button on the 1ups that had a basically unplayable Defender game? I have a 1st gen Rampage that has the reverse button way over on another player's button panel, and from what I understand it's the same issue with every 1up that has Defender in its game list. I would think a bypass switch could be installed either on the console or on the back of the machine, that when switched on would essentially divert input from the incorrect button to the correct one, so that you could actually play defender. Just a thought.

@SketchModsThings Жыл бұрын

Great tutorial!! Do they have those buttons in led form?

@KongsRUs Жыл бұрын

Thanks! These aren't the same quality as sanwas, but theses are the closest 1 piece LED buttons you could use: www.diyretroarcade.com/collections/arcade1up-3-4-scale/products/one-piece-design-28mm-led-12v-illuminated-buttons-switch-for-arcade1up-machines

@ztv1990 Жыл бұрын

How do you feel about the arcade 1 up version of gameplay?

@KongsRUs Жыл бұрын

i haven't played MvC2 much as i've been waiting for online play. The other games work well, like MvC1, but it's slower than fightcade version

@ryanmaes9551 Жыл бұрын

Is this process the same for all 1up cabs where all you need to do is cut the nubs off the sanwa (no sanding the board)…or is it only this easy on the new mvc2?

@KongsRUs Жыл бұрын

You can use this same process on any Arcade1Up cabinet!

@ryanmaes9551 Жыл бұрын

@@KongsRUs awesome. Thanks for taking the time. Do you happen to know if this method will also work for the neo geo mvsx arcade (or maybe the button-wells are different sizes?). I prefer shaving the buttons themselves vs sanding the cab unit itself. Don’t know if you have any experience with an mvsx…

@SleeplessOG Жыл бұрын

Can plug in my dragon ball z stick u see the slot for it in back of the panel

@KongsRUs Жыл бұрын

I don't think other fight sticks are compatible with the cab. I haven't tested it myself, but might be something I could try and report back

@rongarzon7295 Жыл бұрын

because of the Mic jack port 3.5 and the Live button would the old deck (mvc1) not be usable with this setup?

@KongsRUs Жыл бұрын

Correct, MvC1 deck is missing those extra things, but you could also drill an extra hole for the LIVE button.

@jimharper5710 Жыл бұрын

Typically long holding the P1 button works same as live button on control panels that don’t have it. Therefore, you don’t really need it.

@rongarzon7295 Жыл бұрын

@@jimharper5710 ooo nice to know ty, reason i ask is because i had a custom deck made for my Mvc1 machine and i expect it to maybe fit a little different, i was just hoping i could hook it rite up with the 1 cable like before no issues. cab should arrive today or tmrw for me to test.

@danielrosario8846 Жыл бұрын

Are they drop ins for big blue also ?

@KongsRUs Жыл бұрын

Should be similar process, just shave the nubs

@Evercade_Effect Жыл бұрын

I wish 1up would just offer upgrade kits and have the buttons pre-installed.

@KongsRUs Жыл бұрын

This would be a nice option for sure

@lifeonmars03 Жыл бұрын

Would you recommend changing the sticks out or leaving them?

@KongsRUs Жыл бұрын

possibly, it's up to you tho! i'm doing a live stream tonight about the evolution of A1up joysticks, but i ultimately will probably upgrade my sticks

@lifeonmars03 Жыл бұрын

@@KongsRUs nice. I'll be tuning in forsure then. I'd love to know what brand to go with for the easiest swap

@ritualdelo Жыл бұрын

Rub the nub then done 😂 easy peezy thanks for the simple tutorial this is a must

@KongsRUs Жыл бұрын

Absolutely!

@koga_jangles1490 Жыл бұрын

I thought you still had to file the holes were the button go to make them fit. Nice to know you dont have to

@KongsRUs Жыл бұрын

Yea, super easy to do with no extra modding for the holes

@MrElijahwatts Жыл бұрын

What size button to get? I might upgrade once I get my Cabinet too. Not a competitive player but I would like to upgrade just because. 😅

@KongsRUs Жыл бұрын

You'll still benefit from the mod no matter what type of player you are! You'll want the 30mm sanwa buttons

@nusilver Жыл бұрын

SF30s

@nusilver Жыл бұрын

By the way, a full set of 12 SF30s will run you about $40 shipped on Focus Attack. That’s the cheapest I’ve found them.

@KongsRUs Жыл бұрын

@@nusilver here's a set of 6 buttons on amazing for $15. amzn.to/3evxOpe

@gamingwithdummies3960 Жыл бұрын

I sanded down my buttons to make them fit too.

@KongsRUs Жыл бұрын

Nice!!

@KnockTsuKow 5 ай бұрын

that blading looks dangeround Kong lol

@KongsRUs 5 ай бұрын

Lol, cheap way to mod buttons and slice your finger! 😄

@r.t.watson738 Жыл бұрын

Hey can you host some combo tutorials live. It would be cool. And, Mrs. KONG could yell out the button commands.🤣🤣🤣

@KongsRUs Жыл бұрын

Lol, I'm sure she wouldn't be that great yelling out commands and I'm not the greatest player. I can do some basics tho, so definitely might consider doing that!

@mrcrowleyoz Жыл бұрын

Why are the characters heavily pixilated?

@KongsRUs Жыл бұрын

It's normal, just looks more pixelated due to the LCD screen. You have the option to turn on Scanlines to smooth them out by replicating a CRT

@Saiyan_Assassin9 Жыл бұрын

What’s the buttons called on Amazon

@KongsRUs Жыл бұрын

here's a link to sanwa buttons on amazon Sanwa Buttons: amzn.to/3g5Svse

@Saiyan_Assassin9 Жыл бұрын

@@KongsRUs thank you bout to use it for my mvc2

@isaias630 Жыл бұрын

Do you have a link to the buttons?

@KongsRUs Жыл бұрын

Yes, check the description for links and the top pinned comment!

@isaias630 Жыл бұрын

@@KongsRUs yes I see it thank you sir!honestly this is the most easiest way a button replacement I’ve seen anyone do arcade 1up and it literally took this long for someone to do it right so thank you.

@MikeOfAllTrades Жыл бұрын

Lol I want my stick tutorial

@KongsRUs Жыл бұрын

Haha, it's coming! I did a deep dive into sticks and have a good video planned for it

@merovingianfrench8526 Жыл бұрын

You guys are awesome! Kong, great tutorial! MOAT, you already know how special your channel goes in too! I get my cabinet today and I can't wait to share my screen name with you all so we can take it to the STREETS!

@rayplaysgames_RPG Жыл бұрын

Just got my mvc2 unit. Going IL sticks and buttons in the near future. Unfortunately mine came with a couple huge scratches on the plexi...

@nicolasjones2929 Жыл бұрын

Pause lol

@WawrzyniecTheIII Жыл бұрын

Why are they shipping their Crowning Jewel shipping out like this? They fixed this long ago with the Marvel Superhero Limited Edition.

@KongsRUs Жыл бұрын

they did 1 cabinet with geniune sanwa sticks and buttons, but i don't believe that special cabinet sold that well. I passed on that version as I am comfortable upgrading my own buttons and sticks. I really do feel you only need to upgrade if you are playing online against others, as most folks playing casually may not care.

@WawrzyniecTheIII Жыл бұрын

@@KongsRUs It's the only fighting game Cabinet I bought. They attribute that solely to the controls they are fooling themselves. It has 3 games and none of them were extremely big pulls like SF2 MVC MVC2 MK etc. Alot of "Casuals" buy Sanwa Sticks and Buttons fight sticks for Fighting games. Some prefer controllers however.

@Suhadisgood Жыл бұрын

Now you want to upgrade the buttons I believe that cause arcade 1 up is no where being as great as the original arcade machines

@KongsRUs Жыл бұрын

yes, this isn't meant to be an exact replica of a real arcade machine, but a home version for casual folks. Hope most people consider upgrading their buttons for a better experience.

@Suhadisgood Жыл бұрын

@@KongsRUs well tell that to the CEO of arcade 1 up who had a interview with Ganestop who said everything is going to be the same as the arcade machines saying their are the same you played them in the arcade the buttons are just like the ones you played in the arcade then says the original arcade machines were 300 pounds their $3000 just makes me laugh cause not every arcade machine costed $3000 not every one has the same weight that interview just made me want to buy arcade 1 ups really bad it was before they were released in stores go watch it he really makes the games look better then they look

@Suhadisgood Жыл бұрын

@@KongsRUs I own arcade machines that’s how I know they are t the same my last arcade machine was purchased in 2004 brand new sealed bought it for $2,400 on ebay the Ms Pac-Man Galaga it never broke once but the original Ms Pac-Man upright Pac-Man cocktail teenage mutant ninja turtles 4 player broke and needed to be fixed I own them cause the consoles sucked back in the days the arcade ruled the world of video games I had no choice but to buy arcade machines if I wanted to play the games at their best the consoles were trash

@Suhadisgood Жыл бұрын

@@KongsRUs the only thing I think of upgrading that’s worth my money and time is my PC I bought in 2015 graphics card making the PC play at its best if arcade 1 ups were possible to change the graphics make them play a lot better then how they were I probably would do that but my focus on arcade - up is buying the games that failed on consoles not the games that didn’t fail why buy Tekken 7 arcade machine when it doesn’t suck on consoles PS4 xbox one Steam PC it’s so huge it won’t fit in everyone’s house but the point is does the consoles play the same

@beaubowss6813 Жыл бұрын

10:58 😭🤣🤣🤣

@magicshow32 Жыл бұрын

I wish they would just use these when making these cabs. I would pay extra $ to have better quality parts!

@KongsRUs Жыл бұрын

Yea, at least this is a simple upg most people should be able to do

@magicshow32 Жыл бұрын

@@KongsRUs Yes, and I appreciate you sharing with the community!!!

@r.t.watson738 Жыл бұрын

Hell, I'm surprised Bobby VU doesn't 3D print his own buttons.🤣🤣🤣

@KongsRUs Жыл бұрын

Haha, he doesn't do 3D printed stuff much, he's all about using his hands

@EveryDooDarnDiddlyDay 4 ай бұрын

Is that really how people used the buttons? No wonder they never worked.

@zordoneltar5571 2 ай бұрын

This is one of the many reasons arcade1up is trash

@isoftcxttoncandy9308 Жыл бұрын

If you paid $600 -$700 for these you SHOULD NOT HAVE TO MOD THEM. STOP hyping these cabs up. YOU are part of the problem!

@KongsRUs Жыл бұрын

Who is hyping the cab? Many people change their buttons all the time to their preference. Especially if online competition is involved. Please don't gatekeep how others enjoy this hobby

@isoftcxttoncandy9308 Жыл бұрын

@@KongsRUs GATEKEEP?? YOU reviewed this thing 2 months ago and I quote "an absolute must own in my opinion". Don't be a hypeman to GAMERS in this community.

@KongsRUs Жыл бұрын

@@isoftcxttoncandy9308 what defines a GAMER in this community? Keep sitting on the curb yelling at folks to stop having fun, otherwise, try to enjoy life a little more and not be so angry.

@isoftcxttoncandy9308 Жыл бұрын

@@KongsRUs annoyed, aggravated yes. Angry. I can honestly say that I have never been truly been angry about anything in my life. I would NEVER interrupt gamers from enjoying what they do. However when KZfaqrs do "reviews" first the sake of getting views, YOU WILL BE CALLED OUT ON IT. Nothing wrong with modding to your preference but, to try to make theses things out to be more than what they are is WRONG. People watch these and go out and spend their hard earned cash on products being over hyped. And for WHAT? Why are you still here anyway? Don't you have another 4 - 5 more Arcade1up videos to make before the week is up? (I'm aware that it's Friday) It's a free country. By all means continue to be a shill.

@StreetPreacherr Жыл бұрын

I'm also amazed that customers seem 'happy' to accept that 1up is saving a few bucks (cents?) on each $500 system by using cheaper 'generic' buttons/switches. It would seem to make sense to cut corners on components owners likely won't see or touch, and focus on the quality of the controls/display? Or are most owners just 'blissfully' unaware of the deficiencies in the control system compared to 'authentic' arcade hardware? And if they don't care about the quality of items you DO interreact with, then what are the chances they didn't also cut costs on things you DON'T see, like power supplies, capacitors, etc?