Some folks dont know Echo has been making power saws for a LONG LONG time. I have a nice small echo saw my son uses and its like from the 70s or early 80s. I got it for FREE. Its a fantastic little saw. The saw was in MINT shape and the guy said it wont run... I dumped out the old gas. put a small amount of true fuel in it sloshed it around dumped it out did that 2 times then put about 1/2 a tank of gas in it and it fired up like clock work. Mint little saw... Made in Japan. Im a Stihl fan boy. Big time... I bought the Echo 9010T backpack blower and its INSANE... It will blow rocks sticks and any leaves no matter what. the blowing force is awesome.

Please get a CS-620 and compare, noticeable difference in power. CS590/620 differences: Cylinder porting, 2-ring piston, metal handle, mag clutch cover, captivate 19mm bar nuts, outer bucking spike, rim sprocket, unlimited coil, roller chain catcher, larger carb, solid rns vs laminated bar, welded muffler lower support spacers, timing/porting.

Yes sir! I have a 590 and it came alive when I did the muffler mod. I opened a new exhaust port a little smaller than a quarter (25 cents 😅). It’s a different saw…..totally different. Removed the limiters too…had to to get a good tune. Keep it up bud!!!

I love my 620 PW I couldn't imagine taking it apart and putting it on a 590 LOL but that thing does work pretty cool I'm impressed with what you have sir. And I'm maxed out with the 33 inch bar so I am extra impressed

Good job on this video. The echo 590 is definitely my go-to saw and I have a lot of saws mainly because of its power and weight

I also agree that the 590 is THE BEST saw available for the money. And punches WELL above it weight I’m going to be porting a 590 for Tc’s Outdoors

Going from a 390xp to the 590, im hands down thoroughly impressed. I absolutely love the timberwolf.

Yup. I run a 28 on mine. Use it regularly cutting trees for the county. Never fails me.

Great video Boedy. Congratulations on hitting 4000 subscribers.

Great video 💪🏿Showing that ECHO power

Dang! He pulled out the wolf!!! Howwwwwl! Didn't expect this to be put up against the big boys! Love it!

Sounds AMAZING 🤩

I have one. I love it. Used it for 4 years. To cut about 30 cords a year. Zero issues.

Love me some Echo power. Good equipment!

I own 2 Timberwolves, one pipe modded and other muffler modded and of course the Air filter mods. They're really good saws, cuts anything you need it for.

I personally love my echo chainsaws! I hope that one day you can run a stock Cs620p against the stock Cs590 with the same bar and chain in the same wood. Then maybe you can also run it against a few other chainsaws. Love the videos keep it up!

Another great video of a great maybe best 60cc saw!! High jet mod muffler mod ( limit caps of course) shite air filter needs O rings Reshape the plastic inside the air filter 40:1 Red Armor Add 10% Castor Run 24 and 27 bars on mine Mostly 27 Oiler will keep up just keep bar groove cleaned out dead dry Ash is the worst Rakers about.030 for 20-24 bars .025 on the 27 Congrats on 4000!!

Another great video I bought the husqvarna 460 but I still love it. I am going to get the 395 clone

This has me sold on getting a 620 !!

Echo cs 590 is like you said the best saw for the money. Used to use it daily to clear out my woods and it just plain works. If you want to buy a stihl for the same power you have to spend a bit more money. Echo has treated me well and been dead reliable. Thanks for the content and an excited to see more of the Timberwolf on the channel! Thank you and have a good day.

Crazy it pulls that bar that good in wood like that strong little saw

Your saw running has gotten better sir!

Just picked up a 501p today.. to go with my 620pw and 3510 :-D Fkn love my echos.

im looking to get one myself because ive got a cs 400 right now and it runs like a beast. but id love to add a 590 in my collection

That’s nothing but good ole. LONG STROKE power.

Great video. I own a 590 and I'm wanting to go to a 36" bar. What are the parts I need to make it run the best without porting it right away

Going 2 hit 4000 subscribers today! Congratulations Big Guy!👍s🆙

Good content! Get the X Series, no modding necessary. After 30 years with Husqvarna XPs, I added some Echo Saws to my fleet this Spring 2024 season by recommendations from my mechanic. He was right, I am very impressed with the performance of the X Series Pro LIne. I did drop some coin on them, the CS 620 P, and the CS 7310 were around $1700 bucks together, with long bar, extra chains, etc. An MS 462 is 5.9 HP, and $1400. When you add the long bar, 2 chains, and tax, it's around $1700 here in Vermont. I am on the hunt to add a CS 8000, and I think that will be all I will ever need for power, reliability, and durability for less money than Husqvarna or Stihl in similar classed saws.

They are solid saws🤙🏻😎

Quick question. What does it take to make the Stihl bar’s work on an echo and will a husky bar fit? I currently run husky with 3/8 .050 on a 562 Xp. Thanks like all your videos so far!

I love my 590 bone stock. It does everything I ask of it. My DCS 2500 T and the 590 sold me on ECHO.

Love my 590. Just don't get to use it enough.

Have a 620p that I opened the baffle up on. Will probably open the muffler up more. Great saws IMO.

The wolf is a premium saw for sure! Hard to beat quality!

Thanks for further showing me I didn't NEED my 660 clone😅 seriously though, love my CS-590 also with pretty basic mods. Typically run it with a 20" bar but it has no problems running a 27 or 28" whatever echo calls it bar when I need a little more reach!

I love my 590 and my cs310 they do what they are supposed to

Please explain what bar and chain you put on. I thought 24” was the biggest bar you could put on. I want to know how to add a 32”

I dont know if you said it or not but were you running a full comp chain or skip tooth chain on the 590 with 36in bar

I would also suggest changing out the clutch drum and sprocket for the 620 setup.

TC outdoors has a channel and all he uses is a 590 with a 24 inch bar. Cuts thru everything and it’s stock. He’s been using it for 4 years I believe.

Torquey! It's like the Cummins of chainsaws! Lol 🤣

I just found your channel and wow you put our some good stuff! Do you thing the 590 or even the 620 could handle light milling with 24 to 28 bar?

Congrats on 4K

I love my 590!

Boedy.....how well does the oiler do with a 36 in. bar?

Put a 20" bar on it look out nice saw is that about = to the 362 stihl ? Good vid 👌 glad I found yer channel! I subscribed!

I'm actualy surprised that worked as well as it did!

How about a cs680 carb & coil?

Have had issues with the chain tensioner on my 590 (easy fix, but annoying), so I purchased a Husqvarna 450 Rancher. The 450 is lighter and seems like a good saw (i.e. does the job) - but it's not a Timberwolf. The 590 is heavier, but it's a pure beast. There is nothing I feel under-gunned for with the 590, and I can't say that with the Husky.

You ain't joking about the saw coming alive on muffler mod, I ordered a red beard air filter, 620 carb & dual pipe muffler mod. I do run saw without air filter cover. Mo air mo power

Love the video , you might advise me on something, I have a 620 p stock , great saw , I wanted to mill a large oak that has come my way ,would the 620 p work a 36 inch bar in a milling situation.What off the shelf mod would give her a bit more power ?Best regards.

It pulled itself through

You've really got me thinking.....Echo is awesome, that much I've known for years....I wish I had money for ANY saw right now - I'd get one for sure....but, in Biden's America, I have bills to pay....

As much as I like my Echo 590, love my 572xp more when running a lightweight bar on it. Brings it to within half a pound of the 590 with the same length bar. Now for small stuff, say 10in and under, prefer my 550xp.

The echo 600p same saw with a few up grades had stood the test of time outstanding the mac 610 are are some of the best 60cc saws ever made the thing with the mac it has a hand oiler to in my opinion a 60cc saw is the best all around fire wood cutting saw the longest bar I ever ran was a 28 but both saws pulled it well I have a 650 mac that is mint I know that Thay are a factory hot rod but I hate to run it I ran my 310 stihl the other weekend and it's nice but not in the same class as the echo or mac

I just got the same shirt today for my birthday lol

I've had a 590 for about 5 years now, never an issue except the kill switch came unplugged. Its a mean saw, far better than any Stihl I've ever owned

I would like to see a wack off with the 562 and the direwolf or a makita 6100

I like your IDGAF attitude on display in your videos - that’s why I subscribed (plus I cut a lot of wood and run a lot of saws).

she has her hands full

Got mine off eBay w 24" for $399. Did get a 20" and put on it though. Couldn't say no when everywhere else, including all other sellers on eBay, twas $419-449 w 20". Took a while but now that it's broke in it's come alive. Did the muffler right away so didn't notice anything there. Think it will very soon pass my Husq 450 as my fave

Off the shelf MSRP, the 620p and especially the pw are an unbeatable value. I understand sticker shock, but you need to get the 590 for sub $250 to pass on the 620 as it gives you room to upgrade the clutch cover and bar to "pro" as i find the engine in stock form earns the rating by relatively recent standards.

I bought my 590 from a garage sale about 5 years ago and still runs like a champ. No modifications so i doubt it would run a 36 inch bar but i never tried it. I have a echo 800 with a 36 inch. It'll be a lot slower on some live hardwood i bet with the 590.

you could make some cool tables out of that slab.

I’m compressed 🤙🏽😂

what is the case made of? what is the clutch cover made of? plastic or a metal alloy?

Do a video on the echo 361p. Not many videos on that one

This saw runs circles around the Stihl equivalent, I had them both. And the echo has absolute gods of torque compared to the stihls.

Try a Husqvarna 562 XP have a 28" bar and love it

I have a Echo 590, several 680's and an 800. I run 28 inch bars on everything and I have one 36inch bar. I put that on the 590 believe it or not. The 590 is my best cutting most consistent saw and chews through hardwood with a 36. I probably wouldn't run a 42 on it, but it handles a 36 just fine! TBH the 800 really doesn't impress me. It's heavy, has very little mid range torque and can bog easily. You keep the RPM's up and it does fine though.

I really Wana port that saw now lol..runs good tho..

Been using one for a tree service for idk.. 5 or 6 years in big wood, been dropped thrown and tossed. My 038 (modded) will out run it by quite a bit. But even without the saying for the money, the 590 is a tough, stout bastard

Nice video. How does it oiler keep up on a 36"?

I wish they would put a manual oil button on 590

For parts, always check the prices from SEPW Small Engine Parts Warehouse in (Wisconsin?) I found them 8 or 10 months ago when looking for Shindaiwa and Echo parts...& they by far have the cheapest prices on every single part I've needed. cheaper than everybody else online by far, and they seem to simply price everything at 20% to 25% less than MSRP. Cs620p Ignition Coil $66.51 Cs620 Carbeurator $72.88 I've have no connection to them, and couldn't care less where people buy their parts from. I just like to pay as little as possible exorbitantly overpriced parts. I guess part of the reason individual parts are so expensive, is the retailers tack on extra to cover the shelf space of parts in warehouses..Like a rental of space that the part took up, since it was manufactured I guess.

almost 4,000 subscribers

I would worry about smoking that clutch with that big bar on it

I've just picked one up used for $200 on marketplace.

At the price, best bang for your buck 100%. That 7310 is a bad mamba Jamba though. Run a 20" on 590 and pull the 7310 out when I need the 36".

I love you 620. I'm not into mods but there's nothing close to 30 inches in south Texas. My oldest echo is 20+ yes old.

Mesin tangguh 👍

I run a 2 foot bar on my timberwolf. My dealer thought I was crazy, but Echo's website said it could be done 😂

Lol. Stihl guy excuses for the ported 2258. 😂 Just poking fun Mr lumberjack.

Bought the store display, without chain, oil cap, and one missing blade screw for $225. Wow! After completing home repair, it RIPS!

Try big bar on wemars next!

1 adet 4510 ve 2 adet cs 590 echo benzinli testerem var onlarla çok mutluyum

That's all is true my friend

I would love to see this thing on the wemars "62cc". It would be really interesting to see the difference. You probably have a good sense of what the wemars is capable of, how do they compare?

As a professional tree climber for 29 years, all of my blowers/hedge-trimmers/weed-whackers, etc., have always been ECHO. I stand by that brand 200% As far as saws in this "cc range", I've been a die-hard fan of the MS-362 for almost 20 years now. While the saw in this video sounds really healthy, I would be surprised if it outperforms the 362 (I've heard that one of the recent iterations of the 362 sucked, but I was lucky enough to skip that phase, apparently)... [edit: I did run 36" bars on that saw by the way...which is not really ideal, obviously 🤣....just need to know how to work a cut with patience]

Sick

Kalau benar begitu saya ingin punya satu merk dari echo kaerana berkualitas tinggi..

I can't believe it

Ya Otta try that log with a 28 on it

Works a lot better than my 455 Husqvarna.

Jonsereds from WHICH ERA?? I was so excited to hear you say that, because my very first saw, which I bought off of my Father in 1990, was a 1977 Jonsereds!!!👍💪💪😜 I know that they, like Husqvarna, ha e had ups and downs....which is why I'm curious....last I checked a few years ago, they were looking kinda cheaply made....but I'd love to hear news to the contrary....

Would like to see a review on the RIDGEWAY saw . Home depot sells them i believe . Nice looking saws

knee deep in wood chips after a couple cuts of that big one

Good saws, but you’re still not apples to apples on the 400 and Johnny Red bar for bar and chain. Be interesting to see a rematch when the 400 is broken in with the same bar & chain combo. Fun content never the less!

Not bad haha!

❤