EDC Tool Pouch Setup - Mini Tool Bag loadout

Рет қаралды 111,602

Күн бұрын

UPDATED VIDEO: • Tool Pouch Loadout Set...
Maxpedition E.D.C. Pocket Organizer: amzn.to/3o3dal2
Lutz 6 in 1 Screwdriver: amzn.to/3MqoVv5
VIM Tools Flex Head Ratchet: amzn.to/3RK5dwQ (alternative: Mini Hex Ratchet: amzn.to/44x5dnV)
Tire Pressure Gauge: amzn.to/3I7PeDC
Railer Bit Holder: amzn.to/42BXkN7
Knipex Pliers Wrench 6": amzn.to/3Moj9du
Knipex Cobra Water Pump Pliers 6": amzn.to/3BpzPuJ
Olight Baton 4 Flashlight: amzn.to/47Xzq1m
Fluke Non-Contact Voltage Tester: amzn.to/3W5rQMM
Klein Precision 4-in-1Screwdriver: amzn.to/3pubvVN
Ullman Pick Set: amzn.to/3MoqjhU
Neodymium Disc Magnet: amzn.to/3BqG1CP
Sharpie Marker: amzn.to/3Ib6Z51
Makita 1/4" Sockets SAE: amzn.to/48hTfjH
Makita 1/4" Sockets Metric: amzn.to/42Y4dZ5
Rite in the Rain notepad: amzn.to/3O4Pd7q
Klein Wire Stripper: amzn.to/3O4rpAB
Tape Measure: amzn.to/451EMYo
WorkPro Folding Utility Knife: amzn.to/43dAJry
EDC Small Tool Bag setup with maxpedition E.D.C. pocket organizer that weighs 3Lbs. Completely loaded out EDC tool kit with most used tools.
00:00 Intro
00:35 Rite in the Rain Notepad
00:43 Pen
00:50 Magnet
01:00 Straight Pick
01:15 Olight Flashlight
01:40 Tape Measure
01:49 Magnet
01:56 Tire Pressure Gauge
02:00 Mini Flex Head Ratchet
02:39 Utility Knife
02:56 6-in-1 Screwdriver
03:41 Fluke non-contact Voltage Tester
04:11 Sharpie Marker
04:22 Knipex Pliers Wrench
04:40 Cobra Pliers
05:13 Precision Screwdriver
06:30 Wire Strippers
07:01 Zip Ties
07:15 Hex Sockets
08:50 1" Hex Bits
10:55 Suggested Improvements
#EDC #edctools #loudout

Пікірлер: 192

@Simplelittlelife 11 ай бұрын

Sweet kit! Thank you so much for the shout-out! Much appreciated. I like all the additions you've added. Now to re-visit my kit😆👍

@projectpinehills 11 ай бұрын

@Simplelittlelife No problem, I'm glad you figured out I was referring to your channel because I didn't say it very well in the video lol. I really liked your video and I have some updates coming to the EDC tool pouch. Thanks for commenting!

@deanwalker8404 Ай бұрын

Has anyone seen one of these kits that look like they've been used? 😂 Love the kits but they all look absolutely pristine, well at least all the ones i've seen on channels!

@projectpinehills Ай бұрын

This was the first version of the kit that was put together and then a video was made while the information was fresh in our mind. Otherwise it would never get published. I regularly use this and have updated it based on usage and feedback from comments. Got to publish a video to get feedback.

@motorcityemt5903 9 ай бұрын

This is hands down the best mini tool kit setup I've seen. Been watching loads of these videos lately, but nothing like this. 🤘🏼

@projectpinehills 9 ай бұрын

Thanks. Did you see the update video?

@SussexEDC Жыл бұрын

This is a REALLY great load out. I have a similar Knipex and micro wrench in my set-up, but you've given me some good ideas. Thanks for making this and sharing your kit.

@projectpinehills Жыл бұрын

Thanks and thanks for watching!

@sloanNYC Жыл бұрын

The Makita sockets are great, the sleeves are excellent to keep them organized in a really small form factor.

@projectpinehills Жыл бұрын

They are. Definitely don’t get the recognition they should. Thanks for watching!

@tjp148 11 ай бұрын

@@projectpinehills Odd that there's no 5.5mm which is the common size for M3 nuts, 6mm sockets aren't used that often...

@projectpinehills 11 ай бұрын

I agree. Thanks for commenting!

@dashdigital5869 11 ай бұрын

I really like that mini ratchet. Definitely gonna get one of those.

@projectpinehills 11 ай бұрын

I just bought a 2nd one Saturday. Do it by the 4th of July, 20% off coupon. Thanks for watching!

@MADHIKER777 Жыл бұрын

Very complete socket/bit setup!

@projectpinehills Жыл бұрын

Thanks for watching!

@jamesweaver6631 6 ай бұрын

I would add disposable gloves, and Band-Aids, started adding those to my pouch, and actually use them alot

@projectpinehills 6 ай бұрын

Good ideas. I will add those. I need to do an update video. Thanks for watching!

@RockLobster2000 2 ай бұрын

Thank you for the video. My kit is similar. I do love the makita socket set! It is so underrated. The socket holders are flexible and very compact.

@projectpinehills 2 ай бұрын

Yes the Makita set is great. Indexed socket organization is important. Check out the recent update video, v3.0 for this pouch. We made a lot of improvements. Thanks for watching! 👍

@Bear_in_mind. 2 ай бұрын

I’ve been doing a lot of research on building a tool bag like this. I wanted to put a Wera tool check but I would have to pick between metric and imperial set. The makita sockets are EXACTLY what I’ve been looking for. Thank you sir! It’s a great set up!

@projectpinehills 2 ай бұрын

I had the same consideration with the Wera tool check. Check out the 3.0 version of this pouch on the channel that was just put out recently. I made a lot of improvements. Thanks for watching!

@sashaghovanlou8175 8 ай бұрын

This was excellent, thank you so much for the content! Refreshing to see a kit that doesn't include a bunch of pens and pencils

@projectpinehills 8 ай бұрын

Thanks and thanks for watching. Checkout the 2.0 video for this as I’ve made several improvements. I have also moved to a Klein 14 in 1 for the screwdriver. 👍

@sashaghovanlou8175 8 ай бұрын

I'll check it out! @@projectpinehills

@enriquediaz7547 Жыл бұрын

Finally found the icon tool kit at Harbor freight! After many months… it was the only one left. Really cool kit. Rivals the topeak with more options.

@projectpinehills Жыл бұрын

Good deal, glad to hear it. It was out of stock when I checked recently. Thanks for watching!

@projectpinehills 11 ай бұрын

I just bought a 2nd one yesterday for 25% off. Store has one row of them on the shelf.

@triplenickelniner 10 ай бұрын

I like the magnet idea on the front. I’ll have to check into something like that. I subbed

@projectpinehills 10 ай бұрын

Thanks for subscribing! 👍

@allkindsofoutdooractivities Жыл бұрын

Wow great set up! Awesome

@projectpinehills Жыл бұрын

Thanks for watching!

@rustybarrel516 2 ай бұрын

I’ve been making tool kits for my teenage kids to keep in their cars. Will be adding the Makita socket sets to their kits. I’m using the Maxpedition Beefy organizers so I can fit 7-inch tools. Works great and I’ve managed around the horizontal organization on the right side.

@projectpinehills 2 ай бұрын

Nice, that's awesome. I have an updated video version 3.0 of this tool pouch. It has 7" tools in it, check it out. Thanks for watching!

@ritesideofthefence5857 10 ай бұрын

Wow , really and great kit and presentation as well. Thank you for sharing. You’ve earned a new sub.

@projectpinehills 10 ай бұрын

Thanks for the sub!

@jbates1463 2 ай бұрын

Great kit. thanks for sharing!. Personally I also added a "Danco 80132 5/16 In. Sillcock Key" because ya never know. a super loud and flat whistle and a little pen shaped telescopic magnet. Because of you video, I now need to order another Klein touchless voltage tester because my truck bag is now missing one. lol. Thanks again.

@projectpinehills 2 ай бұрын

A sillcock key doesn’t take up much space. I’ve since added a telescopic magnet to the setup. I know what you mean with the non-contact tester lol. Thanks for the feedback and check out the 3.0 version of this pouch.

@SalvadorDaliLama 4 ай бұрын

That huskey utility knife is my favorite knife. They changed it and now it's way bigger. I wish they would go back.

@projectpinehills 4 ай бұрын

Yes it was a good size and I wish they still offered it. Thanks for watching! 👍

@dirtyboytools 6 ай бұрын

Great choices in tools! I've been using a similar ratchet along with similar knipex and Klein tools and they're all very dependable.

@projectpinehills 6 ай бұрын

Thanks, I've updated the load out with a version 2.0 video (kzfaq.info/get/bejne/gs12hbB8rt_QeI0.html) and I need to do a version 3.0 video that has a lot of improvements. Thanks for commenting and thanks for watching!

@dirtyboytools 6 ай бұрын

@@projectpinehills I'll check it out! Always good to improve and adjust your toolkit as life moves forward.

@berenzable 2 ай бұрын

Nicely thought through. I agree with your comments re Maxpedition needing to make a slightly larger pouch with the orientation the same as the EDC Pocket Organizer. I've used the Beefy for the additional capacity, but would like something a bit longer

@projectpinehills 2 ай бұрын

Thanks. Check out the updated version of this pouch in a recent video I posted showing the 3.0 version of this pouch. Thanks for watching! 👍

@davidmatke248 Жыл бұрын

Thanks for sharing that load out! This kit looks really hand to keep in your car. I currently keep a Wera Zyklop in the car, but I have no wrench or pliers.

@projectpinehills Жыл бұрын

Yes good for in the car, that Wera Zyklop is nice! Thanks for watching!

@NickDoesThings- 5 ай бұрын

Nice kit man! I have several points of crossover in my kit! I need to post a video of mine soon. Keep up the great content!

@projectpinehills 5 ай бұрын

Nick, thanks for the positive feedback and I hope you check out the tool pouch 2.0 video. A 3.0 video is in production now. Thanks for watching and commenting! 👍

@planecrazyish Жыл бұрын

Beautiful 👏👏👏👏👏👏👏👏👏👍👍

@projectpinehills Жыл бұрын

Thank you! Cheers!

@redneckaviation758 4 ай бұрын

Great idea really love your video

@projectpinehills 4 ай бұрын

Thank you and thanks for watching!

@jjsifo1 7 ай бұрын

Neat setup !

@projectpinehills 7 ай бұрын

Thanks for watching ! 👍

@mhsvz6735 10 ай бұрын

Excellent, thank you!

@projectpinehills 10 ай бұрын

You are welcome! Thanks for watching!

@VinceR960 Жыл бұрын

Awesome set up. I use a Chapman set for tight spots, but I’ll have to try this icon set out

@projectpinehills Жыл бұрын

I'll check out Chapman, I'm interested in any suggestion. Thanks for watching!

@toddcoble1485 Жыл бұрын

@@projectpinehills The Icon, VIM, as well as every other brand that offers this 1/4" ratchet is out of stock. It's probably all from the same factory

@projectpinehills Жыл бұрын

@@toddcoble1485 Maybe that’s the case. It’s amazing how the stock fluctuates on this item.

@toddcoble1485 Жыл бұрын

@@projectpinehills I'm happy to report I found the Icon kit in stock this week!

@projectpinehills 11 ай бұрын

This past weekend, I saw two rows full of them on the rack. I guess some stores just don't have them.

@drumdad1242 7 ай бұрын

Great video.

@projectpinehills 7 ай бұрын

Thanks, check out the version 2.0 video and the 3.0 video is coming soon! 👍

@asinger261 11 ай бұрын

Very nice setup...maybe a small pry bar and cable saw would be a nice addition

@projectpinehills 11 ай бұрын

I agree. Working to free up more room as well. Thanks for the feedback!

@aylorpaul39 2 ай бұрын

Thanks for doing. I've got dame pouch and alit of the same tools. Like the magnetic disc idea. I've got VIM ratchet , klein precision screwdriver with bits stored in front in dewalt bit case plus wera toolcheck plus. No full size screwdriver in mine . rolls of gorilla tape wrapped round some old credit / reward cards Agree pouch could be longer. Thinking of changing to a vanquest husky 2.0 pouch which similar to maxpedition but slightly larger.

@projectpinehills 2 ай бұрын

Check out my recent update to this pouch, the video is titled version 3.0 and let me know what you think. Thanks for watching! 👍

@gunandknifenut 28 күн бұрын

The magnet is a excellent idea.

@projectpinehills 28 күн бұрын

Thanks and thanks for watching!

@knifeISknife 5 ай бұрын

Thank you.

@projectpinehills 5 ай бұрын

Thanks for watching! 👍

@Juva_o Жыл бұрын

Makita set is very nice !

@projectpinehills Жыл бұрын

I think it deserves more recognition. Thanks for watching!

@benkelsey891 Жыл бұрын

Looks like an awesome setup! I'd recommend some superglue/contact cement. I always carry a small tube and it has come in very handy several times. Also, fiskars makes a small folding scissor with orange plastic handles ghat would barely take up as much space as that utility knife. Those would be really nice if you need to smip anything small which you can't fit in the wirestroipper jaws.

@projectpinehills Жыл бұрын

Thanks for the feedback, it's always a work in progress. Thanks for watching!

@joe_a_photo Жыл бұрын

Wonderful video

@projectpinehills Жыл бұрын

Thank you and thanks for watching!

@kiwee_ 6 ай бұрын

Anyone else screaming "take the bits out!"?

@projectpinehills 6 ай бұрын

You talking about the railed 1/4” hex bits?

@joehikes5855 6 ай бұрын

Harbor Freight has a new icon mini tool kit coming out in 2024 that will include sockets and a socket/bit driver. I think it was still come with the wrench and other items.

@projectpinehills 6 ай бұрын

That’s right, they do, but it will be a different style ratchet system. It makes use of a 1/4” drive adapter to 1/4” hex and won’t be as compact as the mini ratchet in this load out. 👍

@atomicsmith 11 ай бұрын

Great kit. What’s that little awl you’re pointing with?

@projectpinehills 11 ай бұрын

That’s a straight pick from Ullman pick set. I missed that when going through the load out. I have a link in the description. Thanks for commenting and watching!

@aussiehardwood6196 Жыл бұрын

Just make it an edc briefcase or edc 12 draw tool trolley. Get everything IN there, even a dog food bowl to feed your dog in an emergency.

@projectpinehills Жыл бұрын

Already have that, thanks for watching!

@aleffnatureza 6 ай бұрын

👏🏻👏🏻👏🏻

@projectpinehills 6 ай бұрын

Thanks for watching!

@ArtofHOPE_Podcast 6 ай бұрын

Lmao

@ralphnye664 4 ай бұрын

Maxpidion does make one model longer 😎

@projectpinehills 4 ай бұрын

Does it have vertical tool storage?

@xFRIEDxBACONx Ай бұрын

Have you considered the wiha 6 in 1 screwdriver instead?there's 6 longer bits store in the back with more bit options in a pack and is all 1000v rated even the interchangeable bits! I went with the slightly smaller pocket max version. Significantly reduced the amount of screwdrivers I need for work

@projectpinehills Ай бұрын

Are you talking about Wiha 28345 pocketmax?

@Substancejdno Жыл бұрын

Great Video. I have a maxpedition Fatty, a couple of Vanquest, and Roaring Fire Ember. Maxpedition does make an 8" bag is called the "Skinny", but the right hand side bungies are orientated sideways. And there is no top load pouch on the left. The Vanquest 8 inch pouch has the same challenges. The Roaring Fire might be what you are looking for but it has 2 separated man compartments.

@projectpinehills Жыл бұрын

Thanks for the feedback and thanks for watching!

@toddcoble1485 Жыл бұрын

I just picked up the Vanquest EDCM-Slim 2.0. It has the same interior orientation as the Maxpedition EDC, but is slightly larger. It's PERFECT for my EDC toolkit

@projectpinehills Жыл бұрын

Thanks, I’ll check it out.

@hawaiianboy2003 7 ай бұрын

Looks like ur ready to take a service call!😂

@projectpinehills 7 ай бұрын

You bet! 👍

@davidlanders2671 11 ай бұрын

The added length may be nice, but you can take this pouch with all the tools and fly. TSA limits tool length to 7". Just a thought...

@projectpinehills 11 ай бұрын

Thanks for the feedback! 👍 and thanks for watching!

@dar7771 11 ай бұрын

Yeah I have the same frustration with their fatty model. You may wanna check out the Vanquest EDCM-Slim 2.0 Maximizer. Believe it’s 8x6x1 pouch and the organizers are same vertical on both sides. Anyhow. Nice edc. A bit over stuffed. That Vanquest would be perfect. Check it out.

@projectpinehills 11 ай бұрын

I think you might be on to something, it does appear to be 8 inches tall and twice the depth. I'm checking it out. Thanks for commenting and watching!

@projectpinehills 11 ай бұрын

Looking at this in detail, this pouch might be exactly what I described wanting in the video. Thanks for letting me know about it!

@dar7771 11 ай бұрын

Couldn’t help but buy that Vanquest 8 inch I mentioned. Just received. It’s perfect. Gonna build one out to keep on one of the electric bikes we take camping. I too like the full size screwdriver. The 11 in 1 Klein fits in this no problem in length. Handle girth may be issue depending on placement of other tools. Enjoyed your video. Very practical/usable picks. 🤝

@projectpinehills 11 ай бұрын

I've updated the EDC tool kit load out with the Vanquest check it out: kzfaq.info/get/bejne/gs12hbB8rt_QeI0.html

@dar7771 11 ай бұрын

@@projectpinehills Very nice 👍. Now that is perfection. 😀 Knew that would be perfect for you. That sir is an absolute usable Tool EDC. Great video update. I subscribed today. It’s nice to be able to network with folks that have the same interests.

@Whigu Жыл бұрын

4:23 Not sure what you said there? That magnet thing was pretty smart and I'm going to copy that 😀

@projectpinehills Жыл бұрын

If your expecting perfection, you came to the wrong place lol. Glad you got something out if it. Thanks for watching!

@Whigu Жыл бұрын

@@projectpinehills I'm not expecting perfection I'm not native english speaker so I just wasn't sure what you said there. So no worries and video was good keep doing EDC tool stuff =)

@projectpinehills Жыл бұрын

Thank You!

@harveysmith100 Жыл бұрын

4:23. "So we jump over here." He means we go to the other side of the bag.

@projectpinehills Жыл бұрын

That’s right!

@norsefalconer Жыл бұрын

Great loudout. But, the magnet mod is gold.

@projectpinehills Жыл бұрын

Thanks for watching!

@SurvivingtheDaily Жыл бұрын

I completely agree about Maxpedition. They can do better making a tool pouch. Unfortunately, I've had to look elsewhere for the perfect one.

@projectpinehills Жыл бұрын

What did you find? Thanks for watching!

@SurvivingtheDaily Жыл бұрын

@@projectpinehills I went with a roaring fire tool roll but it still doesn't fit my needs. So, the search continues.

@projectpinehills Жыл бұрын

I checked those out too.

@enriquediaz7547 Жыл бұрын

Maybe move to the maxpedition fatty/beefy ? I like to carry a Tic tac container with a few nails & screws. (Consumables). Maybe even drywall picture hanger & always a length of flexible wire 12 ga? )

@projectpinehills 11 ай бұрын

I’d like to see an update to the beefy but I may give it a shot. Definitely going to add the screws and I meant to add the wire lol. Thanks the feedback and thanks for watching!

@enriquediaz7547 11 ай бұрын

Also: after months of checking my local harbor freight I finally found an Icon tool kit! If was the last one… but so worth it!

@projectpinehills 11 ай бұрын

This past weekend, I saw two rows full of them on the rack. I guess some stores just don't have them.

@lightinthedark_ Жыл бұрын

I use a Maxpedition Skinny for a similar pouch. I just don't use the straps going the other way. The deeper sides of the Skinny, Beefy, and Fatty holds things together well enough - unless you're constantly moving the pouch around while it's open.

@projectpinehills Жыл бұрын

I considered the skinny, thought everything might rattle around but I should really try it first. Thanks for watching!

@nicholasheaps8297 Жыл бұрын

The skinny is the way to go. I keep the knipex 180 pliers wrench and cobras in the straps on the left. Behind that is room for the knipex 145 combo pliers, klein precision screwdriver, a 200 mm cats paw and probably something else. On the right I use the straps to hold a fastback, streamlight mictostream, 9ft dewalt tape measure, and railer double row ball end hex set. The pocket behind that holds my makita 1/4 in sockets, icon low profile 1/4 in ratchet, extensions, universal adapter, pen, and bit extender. Zip ties in a heat shrink tube and a pb Swiss insider sit against the inside seam. Rather packed out the way it is but no issues with things rattling or shifting around.

@projectpinehills Жыл бұрын

I’ll have to try it. Thanks for sharing!

@tboneitsallgood6757 8 ай бұрын

That's a bit much! Maybe for a Bug Out Bag! That's a nice kit.......

@projectpinehills 8 ай бұрын

It’s really a small top bag. Thanks for watching! 👍

@christopherharpster9330 11 ай бұрын

If I could find something like that that attached to my belt, I'd buy it in a second without hesitation. I carry a pocket screwdriver, pen, Milwaukee Sharpie, Milwaukee multitool(the utility knife with the screwdriver), a Klein non voltage tester, pencil, pump pliers, multitool, 30 ft tape, and earbuds all with me daily. Plus my wallet, keys, and a flashlight. I wanna add a pair of strippers, but Im running out of room. Currently in my pockets are my wallet, notebook, pen, pencil, light, sharpie, hankie, pliers, and knife. On my belt is my keys, multitool,pistol, tape, and ear pods

@projectpinehills 11 ай бұрын

Sound line you have a good setup. Thanks for watching!

@hanzo52 8 ай бұрын

Cant find those 1/4" makita with laser etching sockets anywhere

@projectpinehills 8 ай бұрын

There is a link in the video description. 👍

@B-RaDD Жыл бұрын

Algo

@projectpinehills Жыл бұрын

Thanks for watching!

@petercannova5026 10 ай бұрын

a small vise grip plier maybe

@projectpinehills 10 ай бұрын

I’ve been considering that one. Thanks for commenting!

@Yooper05 6 ай бұрын

Maxpedition makes a pouch that is just a little bigger.

@projectpinehills 6 ай бұрын

Yes, but does it have the same pocket layout? Thanks for watching! 👍 I used a larger vanquest pouch for version 2.0 of this pouch.

@davidlarson4292 5 ай бұрын

I’m pretty sure maxpedition makes a larger edc pouch

@projectpinehills 5 ай бұрын

They do, but the pockets are oriented differently. I got a Vanquest pouch. Thanks for watching!

@kyfisher3662 6 ай бұрын

have you ever needed to use it when your not at home or within walking distance from your car?

@kyfisher3662 6 ай бұрын

only scenario I can think of is riding a motorbike as its got limited space

@projectpinehills 6 ай бұрын

Yes I have. I’ve grabbed it when riding with someone else and ended up replacing a dead car battery and putting furniture together. Just like you I thought would I use it? Well I’ve made sure it works for specific jobs. Replacing a faucet, changing a car battery, replacing a switch or receptacle, fixing a gate latch. I’ve grabbed it instead of grabbing the big bag as well. Thanks for watching!

@projectpinehills 6 ай бұрын

It’s great for a motorcycle!

@carljones3515 Жыл бұрын

❤️❤️❤️❤️❤️❤️👍👍👍👍

@projectpinehills Жыл бұрын

Thanks for watching!

@donaldneumeyer4423 Жыл бұрын

Exotac fire starter and a straw wrapped with duct tape.

@projectpinehills Жыл бұрын

Thanks for the feedback and thanks for watching!

@carshius79 Жыл бұрын

This is edc? You really need an electronic voltage tester on you everyday? Also, the giant 4 way screwdriver and precision screwdriver would have been better replaced by 1” bits used in the icon ratchet.

@projectpinehills Жыл бұрын

Thanks for the feedback, you make a valid point.

@harveysmith100 Жыл бұрын

Everyone's EDC is different and personal. I carry a voltage tester. Do I use it everyday? No. When I need it, am I glad I have it. Oh yes.

@projectpinehills Жыл бұрын

Thanks for watching!

@freethinker5225 11 ай бұрын

I'd break that ratchet in a week

@projectpinehills 11 ай бұрын

Thanks for watching!

@MotoDUDEabides 11 ай бұрын

Pronounced NIP-ex. The k is silent. Like in knife.

@projectpinehills 11 ай бұрын

That’s not the case. Knipex has videos on KZfaq and the company pronounces it with the k. Thanks for watching!

@jackeddemon Жыл бұрын

1” you mean 1/4”

@projectpinehills Жыл бұрын

No, I mean 1” long, 1/4 hex bits. Thanks for watching!

@MarineRecon6682 Жыл бұрын

I think you must spoke I know for a fact. Those sockets sets are not fifty dollars a piece or even together

@projectpinehills Жыл бұрын

$15 dollars a piece, sounded like fifty lol. Thanks for watching!

@MarineRecon6682 Жыл бұрын

I really did like the video though a very cool set up

@projectpinehills Жыл бұрын

Thank You and thanks for commenting!

@MPD90 3 ай бұрын

While I know they've become popular, I personally don't get the point of one of these tool pouches. What's the use case for it? In the house surely you'd grab your tool box. In the car space isn't constrained so again, tool box. On a motorbike this isn't really the right setup and it's a tad bulky. Backpacking there'd be no need for half of this, way to much weight. I just don't get when it's for!

@projectpinehills 3 ай бұрын

That's understandable. I have ensured that it can accomplish specific jobs like replacing a car battery, replacing a light fixture or a kitchen faucet. Thanks for watching!

@cheddarbob1447 5 ай бұрын

politics and agenda over all, apparently they havent noticed what a dumpster fire the Star Wars universe and MCUterus has become.

@AMERICANPRIDE1100 Жыл бұрын

Personally I’d take out the hex bits put in some torx instead also if you have strippers you need some electrical tape otherwise it’s pretty complete

@projectpinehills Жыл бұрын

Yes, definitely add vinyl tape. Could wrap it around a lighter. Thanks for watching!

@legallyfree2955 Жыл бұрын

@@projectpinehills If we are going that far might as well throw in a couple of those little solder wire connectors that you can heat with a lighter if you need to. I would also ditch the voltage tester and swap it for a pen multimeter, you can get very small pen mulitmeters not much larger than that and far more useful (though you would need to add the cable though...). I was also ditch the wire strippers for a nice sharp pair of side cutters, then you can still strip wire but you can also do other tasks.

@projectpinehills Жыл бұрын

Those are some good ideas, I’m following up on those. Thanks for watching!

@projectpinehills Жыл бұрын

@legallyfree2955 I considered putting a pen style multimeter in there but are but I don't have one small enough. Can you send me a link to one you think would fit?

@legallyfree2955 Жыл бұрын

@@projectpinehills AHHA! UNI-T UT118B Looks exactly like the one I used to have except it's not green mine was probably rebranded from that or a cheap knockoff. I think Uni-T is a decent brand, it does take a CR2032 battery though. *edit* thats weird, my last reply to you vanished, what I had said was that I couldnt send you a link because I couldn't find my old one but that the Aneng A3008 looked about the right size and it used a AAA battery instead of the cursed button cell battery mine had used hence the reason I probably lost it, and hence the "AHHA" at the start of this comment because I had been searching for the one that I had had.

@hanyolo382 11 ай бұрын

I mean you have like 4 of the same tool maybe a little variety would be better

@projectpinehills 11 ай бұрын

Thank You, always room for improvement.

@tooxtalivai0690 Жыл бұрын

Is it me or does it look like these things are never used or hardly used. It’s common observation I’ve noticed from most edc channels.

@tc8714 Жыл бұрын

I have observed the same.. I think this represents a thought exercise more than a real edc. I have struggled to figure out a combination that allows me to do the most with the least amount of tools. In reality I carry tool box with my tools. I have yet to see one with grease and drywall dust. It seems to be a fun way to play as an adult..by showing tools you can buy...

@projectpinehills Жыл бұрын

@tooxtalivai0690 It’s you lol. The tools are new because they were bought to fit the pouch. Thanks for watching!

@tooxtalivai0690 Жыл бұрын

By the way knipex tools are the most stolen items on a worksite actually anywhere those things attract thieves like flys on shit that’s a caveat you may want to add to future videos, that shit ain’t cheap

@tooxtalivai0690 Жыл бұрын

@@projectpinehills wallet, keys, knife, 5” wrench (not knipex), lighter, smokes, pistol, phone just like all normal cunts putting all that shit on your waist and walking around with it makes you look like a dork. Trust me you see them everywhere looking like fucken Batman, how about take a leaf outta macgyvers playbook and have a stealth carry where you actually can blend in. And be efficient having all that shit is a fuck around and deep down you know it.

@projectpinehills Жыл бұрын

If you have thieves around, anything is up for grabs. Can always have a second much cheaper tool.