No video
FORD RAPTOR CONVERSION | EPISODE 1
Рет қаралды 52,349
4 жыл бұрынFord Raptor conversion build series, going over parts, prices and detailed install on suspension and body components.
Stage 1: getting the exterior in good shape with Raptor upgrades
Stage 2: Full Raptor suspension with upgraded components
Stage 3: Full ADV fiberglass for wider stance
Thanks for watching and if you have any questions leave them in the comments.
www.Outrunclothingco.com
@CrunchDramaNetwork 7 ай бұрын
nice! I'm slowly making mine. I just got my suspension, next will be bumpers
@darklight4815 3 жыл бұрын
I've changed my mind about the raptor bumper because it doesn't mount flush on the sides unless you run fender flares..I really just need a black OEM bumper like the one you took off!
@nickhawes2523 3 жыл бұрын
Where did you get your front bumper and the rear bumper inserts?
@samuelemarchio9676 2 жыл бұрын
Hey I know it’s a long shot after all this time but I see that the raptor headlight trim did not fit perfectly is it something that I dyi and fit the rest or do I have to go the same route as you and cut it and have it cut like that please hope you can help
@EdmonJiddou 2 жыл бұрын
Hey, that was temporary, I ended up going with aftermarket fiberglass fenders and bedsides. Check out my latest build videos.
@stephenayala7621 3 жыл бұрын
Love the build! To put the raptor style tires/rims did you have to level it?
@IsaacRebel 4 жыл бұрын
Going to be following your build i plan on doing the same to a 5.0 i really wish they made raptor body kits for the supercab but the bed is 6.5
@EdmonJiddou 4 жыл бұрын
Thanks Isaac! I am close to finishing the suspension, video soon! And fiber works makes a 6.5 foot raptor bedside.
@Tacomas_shop Жыл бұрын
Sooo you have the single cab ?
@IsaacRebel Жыл бұрын
@@Tacomas_shop had a supercab 2 years ago i have a 21 crew cab now with 5.0
@ziggy760 6 ай бұрын
What was the front bumper install like? Straight up bolts into previous center holes or?
@EdmonJiddou 6 ай бұрын
Yes factory raptor bumper bolts right up, but doesn’t line up with stock f150 fascia. Need to update everything
@ziggy760 6 ай бұрын
@@EdmonJiddou gotcha, I have a Roush 150 and I was thinking maybe with its grille and its fenders that I could get away with it
@underdogjoe 3 жыл бұрын
UCM in the building 💪💪
@EdmonJiddou 3 жыл бұрын
Thanks joe! We’ll keep pushing 👊🏼
@alexmazzilli9417 4 жыл бұрын
Are the shocks from a 1st gen. I can only find the 2nd gen shocks with live valve
@EdmonJiddou 4 жыл бұрын
2017-2018 gen2 shocks are 3.0’s without live valve, that’s what these are from.
@parresdborden 4 жыл бұрын
Looks great
@EdmonJiddou 4 жыл бұрын
Thank you! Suspension video is getting put together now.
@nickhawes-tn6pz Ай бұрын
What did the suspension swap cost you?
@SammTC Жыл бұрын
Did you have spacers on those raptor wheels to mount flush with the fender flares? If so did it not rub with just the level?
@EdmonJiddou Жыл бұрын
Only added spacers after I did the full ADV fender conversion, at the point the truck was in this vid I had no rub. Went on to run 37’s with eibach springs in the latest version, check that vid out.
@goatk1 3 жыл бұрын
Just realized what fender flares did you go with and how much did they run you?
@EdmonJiddou 3 жыл бұрын
This was the old setup, they were just some eBay flares. The new setup is raptor fiberglass from ADV.
@joshnguyen6472 3 жыл бұрын
Do you remember what brand those fender flares were? I bought a set similar but the fitment was awful.
@reiner5593 3 жыл бұрын
Noice
@Mllboii 4 жыл бұрын
Nice video bro !
@EdmonJiddou 4 жыл бұрын
Thank you! Suspension and fiberglass next!
@Mllboii 3 жыл бұрын
Edmon Jiddou ufff I wanna see that 🤟🏻
@Sayitainttae Жыл бұрын
Where did you get Raptor Tailgate from?
@EdmonJiddou Жыл бұрын
Bought mine from eBay, but check your local fb marketplace.
@benclark9455 3 жыл бұрын
Hey man I'm really interested to know. For the front end, if you have every OEM raptor part, that's the headlights, front bumper, hood, and fenders. Can you just bolt it all up together?
@EdmonJiddou 3 жыл бұрын
Yes, they will all bolt up to a F150. But you need everything. Grille, grill surrounds, fenders, hood, bumper.
@EdmonJiddou 3 жыл бұрын
Check out the rest of the build series I break down prices for the complete build out.
@benclark9455 3 жыл бұрын
@@EdmonJiddou ok awesome i was thinking you needed to do everything oem for it to work, makes sense. Thanks man!
@EdmonJiddou 3 жыл бұрын
@@benclark9455 well fenders can be aftermarket, that’s actually what I did. I went with wider ADV fenders for a more aggressive look over stock.
@LuisJimenez-ko9dp 3 жыл бұрын
Yo nice build your video popped up quick question by any chance will oem raptor fenders work with oem hood 2015 f150
@diegocervantes4977 5 ай бұрын
Where can we buy all that stuff?
@Paintotheworld11 2 жыл бұрын
Can This Also be done with a 2018 single cab f150 ?
@EdmonJiddou 2 жыл бұрын
Yes of course, join “raptor swapped f150” on fb it’s a group with lots of info.
@Paintotheworld11 2 жыл бұрын
@@EdmonJiddou thank you
@tylerfrost040192 4 жыл бұрын
Nice!
@EdmonJiddou 4 жыл бұрын
Start a channel!
@tylerfrost040192 4 жыл бұрын
Edmon Jiddou if only I had enough content!
@EdmonJiddou 4 жыл бұрын
Tyler Frost I’d watch day in the life shenanigans, especially silver lake trips. Think about it 🤷🏻♂️
@alikharutyunyan2657 2 жыл бұрын
Thanks for video I want to do same conversation with aftermarket parts and stock suspension with 2.5 leveling kits. Help me please Do I need to buy extra spacers for normal poke? 17x8,5 (315/70/r17) rims with 0 offset on stock suspension. Thanks
@themullisexperience4301 2 жыл бұрын
When you replace the original seats with the raptor seats do the features still work? Like heated and cooled seats?
@EdmonJiddou 2 жыл бұрын
This all depends on the features your donor truck has from factory, obviously can’t add features the truck is not installed with. I ended up swapping the seat harness with my factory harness so there was no issue.
@themullisexperience4301 2 жыл бұрын
@@EdmonJiddou so as long as you already have heated and cooled seats those features will still work when you put the raptor seats in
@mohsenalruwaished6848 2 жыл бұрын
hey, can you tell all the components of stage 2 please. thank you
@EdmonJiddou 2 жыл бұрын
Check out my latest videos, it’s painted with new suspension and body panels.
@darklight4815 3 жыл бұрын
is this bumper considered black or gray?..i can't tell for sure..it looks black..i'm interested in doing something similar to my black F-150
@EdmonJiddou 3 жыл бұрын
It’s a metallic grey i would say…
@darklight4815 3 жыл бұрын
@@EdmonJiddou thank you for the help,I appreciate it
@lbyoung8420 3 жыл бұрын
I’m confused, you state it’s a Lariat but you clearly see it’s an XLT.. am I missing something ??
@zt3457 3 жыл бұрын
How did you find a f150 for that cheap with no body damage? I mean i know it’s probably salvage because it was at Copart auction, but are deals like this common?
@EdmonJiddou 3 жыл бұрын
It’s actually a clean title truck, the airbags deploying usually sends vehicles to auction. Deals like this were easy to come by before corona, now used car prices are through the roof unfortunately.
@zt3457 3 жыл бұрын
@@EdmonJiddou wow that’s awesome that it’s clean title. It didn’t look like it had any structural damage either. Hopefully prices will come down soon. Great job on the build, by the way!
@eddyivantzoc412 3 жыл бұрын
I got a question where did u get the seats and the steering wheel they looks OEM SO NICE
@EdmonJiddou 3 жыл бұрын
Got 2 sets of seats for 2k, flipped the spare pair for a profit. Facebook marketplace and eBay, just gotta search everyday.
@pusseigaming308 Жыл бұрын
Any problems with firmament? Where you able to retain functionality?
@trojan_horse9319 2 жыл бұрын
Does the original hood fit so the overlap does not exist or does the OEM raptor parts on the front interfere with the original hood?
@EdmonJiddou Жыл бұрын
My truck at this stage did not have Raptor hood or fenders, just flares and grille, check the latest videos for updated body work.
@ProfessorMikee 2 жыл бұрын
What size lift is that
@EdmonJiddou 2 жыл бұрын
Stock for raptor suspension, check the latest vids for updates.
@stevenfox5 4 жыл бұрын
Where u get those fender flares?
@EdmonJiddou 4 жыл бұрын
www.ebay.com/itm/Fits-15-17-Ford-F150-F-150-New-Raptor-Style-Fender-Flares-Painted-Grey-4PC-ABS/372178578071?fits=Year%3A2016%7CModel%3AF-150&hash=item56a7926a97:g:TM4AAOSwhWRaw0e7
@NoonMight 3 жыл бұрын
How tf did you get the grille that cheap. On the oem website it’s $800, and eBay the lowest is $600
@EdmonJiddou 3 жыл бұрын
Local fb marketplace, I live in Michigan and the trucks are built here so parts come up pretty frequently.
@aldo_9307 3 жыл бұрын
Was Is it a lariat or XLT??
@EdmonJiddou 3 жыл бұрын
On the paperwork it’s listed as a LARIAT XLT so not sure on how Ford model listings work.
@pitayon727 4 жыл бұрын
What website did you get the conversion shock mounts ?
@EdmonJiddou 4 жыл бұрын
Krazy House Customs
@Doradosworld 3 жыл бұрын
Do you know if i would be able to do this conversion with a 2010 f150? Or f250?
@EdmonJiddou 3 жыл бұрын
Yes, plenty of good info on the raptors swap pages on fb, you can do this swap on any model 04+
@Doradosworld 3 жыл бұрын
@@EdmonJiddou do you know if having a f250 will make a difference on the build?
@EdmonJiddou 3 жыл бұрын
I’ll be honest, I’m not sure how the 250 front end is set up. I have seen it done, but not sure what all goes into it.
@A619D 3 жыл бұрын
Did you install Raptor Gen 1 or Gen 2 suspension parts? I want the uppers/lower control arms etc...
@EdmonJiddou 3 жыл бұрын
All gen 2 take offs, gen 1 works as well.
@A619D 3 жыл бұрын
@@EdmonJiddou what shocks did you install?
@EdmonJiddou 3 жыл бұрын
@@A619D gen2 blues
@EdmonJiddou 3 жыл бұрын
@@A619D watch the rest of the videos, I did a full video on suspension and body panels. The truck is way different than it is in this video
@NoonMight 3 жыл бұрын
How’d you get appliqué on? I’ve resorted to caulk and screws 😬
@EdmonJiddou 3 жыл бұрын
It’s a full raptor tailgate, the appliqué attaches with push clips and 2 screws.
@NoonMight 3 жыл бұрын
@@EdmonJiddou oh damn, i didn’t watch the whole thing so i thought you bought one of those aftermarket/take-off appliqués, i should’ve just bought the tailgate.. cool build though 👏🏼
@EdmonJiddou 3 жыл бұрын
@@NoonMight thanks man! Watch the rest of the build, it’s raptor swapped with new panels and painted.
@NoonMight 3 жыл бұрын
@@EdmonJiddou very jealous, i wish i bought a 5.5ft bed but i did a raptor conversion on my 6.5” 2016 f150, i think i got it as close i can get to a raptor but you def got closer. My next step is to get the oem grille with that under lip. You can check out my conversion on Instagram @dia8etic
@LuisHernandez-fy7kt 3 жыл бұрын
What leveling kit did you have before installing the Ford Raptor suspension kit?
@EdmonJiddou 3 жыл бұрын
I forget, it was some kind of 2” eBay shock spacer.
@LuisHernandez-fy7kt 3 жыл бұрын
Thanks man! You sure saved a lot of money buying that truck and turning it into a beast!
@EdmonJiddou 3 жыл бұрын
@@LuisHernandez-fy7kt thank you! I’m happy with it, paint will help the look tremendously. 👍🏼
@LuisHernandez-fy7kt 3 жыл бұрын
@@EdmonJiddou I had a gmc, but just recently got a white Ford F-150 XLT. Trying to do the conversion as well. Thanks for the parts info.
@EdmonJiddou 3 жыл бұрын
@@LuisHernandez-fy7kt check out the other parts of this series, thanks for the support.
@tempusfugit3635 2 жыл бұрын
Sick but that parts breakdown seems low to me. Unless you’ve got access to cheap parts, I see no way to find a raptor grille or bumper for less than $2000. Headlights and seats are the only ones that seem right based on what I’ve seen
@EdmonJiddou 2 жыл бұрын
The raptor swap community has grown and with this the prices for take off parts has gone up, but you can still find very cheap take offs if you check your local online marketplace.
@EddyGster 3 жыл бұрын
AWESOME... what did you end up doing with your other f150 raptor clone?
@EdmonJiddou 3 жыл бұрын
Sold it last year, frame was rusting and so were the cab corners, this platform is MUCH nicer and much better starting point.
@EddyGster 3 жыл бұрын
Edmon Jiddou Love the channel! Keep up the good work
@EdmonJiddou 3 жыл бұрын
Drxgnogg thanks man! Fiberglass and full suspension in next video. 🙏🏼👍🏼
@EdmonJiddou 3 жыл бұрын
Part 2 is now live, thanks for the support!
@mannylara4794 3 жыл бұрын
Great job bro looks sick.Have a question,did you went with oem raptor grill or did you buy the after market grill to fit the f150?thx
@EdmonJiddou 3 жыл бұрын
Thanks man! This is an old video, check the latest with the new body panels and wheels. To answer your question, everything is OEM Raptor except the fenders I went with ADV fiberglass.
@fcdallas7137 3 жыл бұрын
Was that raptor bumper take off? Did it fit normally on your xlt?
@EdmonJiddou 3 жыл бұрын
Yes both bumpers fit fine, (Raptor take offs) the skid plate needed a couple holes enlarged because of the frame on f150’s having a mounting hole an inch back.
@PrinceOfPunk13 3 жыл бұрын
No lift yet? Do the tires rub? Great looking build!
@EdmonJiddou 3 жыл бұрын
Just installed the raptor suspension, video on that and glass coming up! Thanks!
@PrinceOfPunk13 3 жыл бұрын
Edmon Jiddou I have a 1.5” leveling kit. It has about a 1”-.5” rake. Will raptor wheels rub on my suspension in your opinion? Other than that, my F-150 is stock.
@EdmonJiddou 3 жыл бұрын
PrinceOfPunk13 yes, 35’s will rub on the inside of the fender, a lot...
@Jmramirez427 3 жыл бұрын
What is the trim piece between grill and front bumper?
@kingsam9123 3 жыл бұрын
Thats what Im also trying to find its the only thing I am missing for my build
@CalvinDuVall 4 жыл бұрын
Where did you get the grille?
@EdmonJiddou 4 жыл бұрын
eBay, good deals can be had if you are patient.
@goatk1 3 жыл бұрын
what ever happened to suspension being next week???
@EdmonJiddou 3 жыл бұрын
Sorry man, been a crazy month, suspension is done, front fenders are done and working on bedsides now. All videos are shot, just need to edit! That will be up soon! Stay tuned.
@goatk1 3 жыл бұрын
@@EdmonJiddou Glad you got back! I've been literally planning to do the exact same thing and now that I've started working again I was hoping I would hav a plan. Keep up the updates and let us know if you have an instagram!
@EdmonJiddou 3 жыл бұрын
Part 2 is now posted, thanks for the support! Good luck with your build. 👍🏼
@garrettschoeb227 3 жыл бұрын
Yo man can you link the bumper
@EdmonJiddou 3 жыл бұрын
It was purchased locally off of Facebook marketplace. It’s OEM raptor so search eBay for take offs.
@pistolpanda4582 3 жыл бұрын
Do a full walk around video already
@EdmonJiddou 3 жыл бұрын
There’s an updated video of the final look painted, check the latest. Thanks!
@StevenAllotey 3 жыл бұрын
How did you get an F150 for $8800?
@EdmonJiddou 3 жыл бұрын
Copart! Before covid there were deals to be had!
@RavancheII 2 жыл бұрын
Looks good, and you did a great job doing it. Your heading announcement is incorrect however. Only the Raptors between 2010 to 2014 are SVT. The 2017 through 2022 are Ford Performance. Your FRaptor (fake Raptor) would certainly fool the general population though. Kudos for the attention to details. I have the 2010 Raptor SVT 6.2 V8, and for the fact that I am the 3rd owner, and where it originally came from, it is in excellent condition for the price, considering that it came from a Ford dealership as a trade in.
@EdmonJiddou 2 жыл бұрын
Thank you! Check out the latest vids! It’s come a long way!
@kingsam9123 3 жыл бұрын
Where did you get this front bumper ?!?
@EdmonJiddou 3 жыл бұрын
It’s a takeoff bumper from a local raptor owner. They are always on eBay for your $3-400
@kingsam9123 3 жыл бұрын
@@EdmonJiddou i just got the same truck this weekend and am looking to do a front raptor conversion. Did the stock oem raptor bumper fit on this truck mines a 2016 and has the same stock bumper you had before. Does the raptor bumper fit on these ?
@EdmonJiddou 3 жыл бұрын
@@kingsam9123 so it will bolt up yes, but will stick out 3 inches on either side past your fenders, and will not follow the grill shape since raptor grills have a different profile. I would hold off on installing the bumper until you have the rest of the front end parts.
@kingsam9123 3 жыл бұрын
@@EdmonJiddou thanks bro !!!
@kingsam9123 3 жыл бұрын
Hey bro what were the parts and where could I find them for the front end. Ive been looking everywhere to find headlight trims to convert my 2016 f150 to the raptor style front end you did.
@Techno4more 3 жыл бұрын
Where do you buy a truck by auction?
@EdmonJiddou 3 жыл бұрын
Copart.com
@A619D 3 жыл бұрын
Where are you buying the factory interior parts. I cant find factory seats for $2,000 or headlights for $1,000???
@EdmonJiddou 3 жыл бұрын
Purchased 2 pairs of raptor seats for $2k actually, sold the second pair for 2,300. 😅
@EdmonJiddou 3 жыл бұрын
Just gotta scavenge marketplace and eBay man, I have a local hookup since they build raptors in my state.
@A619D 3 жыл бұрын
Edmon Jiddou give me a heads up when you come across some good parts. I can use them for my build. I just started a channel. Im going to be building a F150 also. Its called @CarbonF150 check it out when you can.🙏🏼 Thanks!
@EdmonJiddou 3 жыл бұрын
Just searched, can’t find your channel, do you have any videos? Might not be searchable yet.
@giaarmany7329 3 жыл бұрын
For sale?????👈👈👈👈😱
@EdmonJiddou 3 жыл бұрын
Sorry, this one is staying a while. Got some more plans for it. Ty
AmericanTrucks Ford
Рет қаралды 1 МЛН