Eduard flaps PART 1. Airfix 1/24th scale MkIX Spitfire Natural Metal Finish MJ250 Build.
Рет қаралды 817
Күн бұрынA part 1 of how I installed the PE Eduard flaps to my Airfix Spitfire
Please me a coffee to help me out with this channel :) www.buymeacoffee.com/banditxzxzf
00:00:00 Introduction
00:02:29 Preparing the plastics ( music on this bit )
00:14:17 Building the PE parts
00:50:49 Fitting the flap structure
00:55:01 Conclusions
@mollirodhaet7224 19 күн бұрын
Amazing details! Thank you!
@RichardsModellingAdventures 18 күн бұрын
Glad you liked it 👍
@ricardoroberto7054 18 күн бұрын
Imagine if you couldn't get that piece out again! 😮 The mat is a good idea. Very fiddly work but worth it.
@RichardsModellingAdventures 18 күн бұрын
Yes it would be a bit of a nightmare 😂 The mat worked in this case but in hindsight I would have fitted that part once the basic flap structure was fitted to the wing
@ricardoroberto7054 18 күн бұрын
@@RichardsModellingAdventures I guess it's easy after the event but as long as the results the same. Regarding the sticky mat I guess another way is to put pins around the part to stop it moving a bit like making balsa models.
@RichardsModellingAdventures 18 күн бұрын
@@ricardoroberto7054 yes I’ve build loads of balsa models in my time. As long as it keeps still anything is worth a try
Modelling Weekly
Рет қаралды 25 М.
BalcevMMA_BOXING
Рет қаралды 19 МЛН
Richard's Modelling Adventures
Рет қаралды 2,8 М.
Gary's Stuff
Рет қаралды 19 М.
Hammerhead Model Making
Рет қаралды 35 М.
Richard's Modelling Adventures
Рет қаралды 53 М.