Eemann Tech Upgrade Kit for Shadow 2 (ET-130052) installation

Рет қаралды 79,664

3 жыл бұрын

Eemann Tech Upgrade Kit for Shadow 2 (ET-130052) installation
The Eemann Tech Upgrade Kit is made for the most popular competition pistol in the world - CZ Shadow 2 and is used predominantly for IPSC, USPSA & any action sports.
All factory pistols are setup to pass stringent tests with a multitude of ammunition hence the heavy springs and factory parts.
The most popular pistol, the CZ Shadow 2 is already made for competition ready mode, but it’s always possible to improve the trigger group and other functions of your competition gun.
The upgrade kit ET-130052 has all the needed drop in parts to upgrade your pistol from the box to full competition mode, without any major changes required to your platform.
The Eemann Tech Competition springs reduce the weight of the trigger and slide reciprocating recoil making it more sensitive and faster for competition use.
The Eemann Tech Extended Firing Pin eliminates misfire problems with your gun, if you are reloading and using hard primers or customized very light main spring.
The Eemann Tech Competition Disconnector will ensure an ultra-short reset without any additional modifications to your gun.
Eemann Tech Upgrade Kit 44-130052 for CZ Shadow 2 contains:
• 44-131140 Eemann Tech Recoil Spring for CZ 10 lbs. - 1pc.
• 44-131118 Eemann Tech Main Spring for CZ 8 lbs. - 1pc.
• 44-131109 Eemann Tech Competition Trigger Spring for CZ 75 - 1pc.
• 44-131156 Eemann Tech Competition Firing Pin Spring for CZ - 1pc.
• 44-131113 Eemann Tech Competition Sear Spring for CZ 75 - 1pc.
• 44-130044 Eemann Tech Competition Disconnector for CZ - 1pc.
• 44-130015 Eemann Tech Extended Firing Pin for CZ - 1pc.
• 44-303017 Eemann Tech Competition Buffer for CZ 75 - 1pc.
• 44-130064 Eemann Tech Competition Trigger Pin for CZ - 1pc.
• 44-130055 Eemann Tech Hammer Strut Pin for CZ - 1pc.
Compatible with:
• CZ 75 SP-01 (without firing pin block models)
• CZ 75 Shadow Line
• CZ 75 SP-01 Shadow
• CZ 75 SP-01 Shadow Orange
• CZ Shadow 2
• CZ Shadow 2 Orange

Пікірлер: 83

@deanmiles3505 21 күн бұрын

I love your videos, they are extremely detailed and informative. Thank you, Take care, Be safe

@davidrolla7264 6 ай бұрын

Just want to say thank you for the great video. I have watched a lot of trigger installs but this is one of the best. And I'm not even done with it yet!

@sergejskripkus3230 2 жыл бұрын

Thank you, well detailed video, as well as a great kit. Installation took around an hour for a first timer (had no special tools and don't see them as extremely necessary). Packing it all up and straightaway to the range. :)

@jurgenwiedekind431 2 жыл бұрын

Great video, I built the kit into my Shadow 2 OR. SA from approx. 1500g to 1200g. Creeping has gotten better too.

@Ian-wb7pw 2 жыл бұрын

Excellent video Paul. Just did mine and this helped heaps.

@lloydmanor8235 3 жыл бұрын

I always look forward to your video's.

@demetriogranados3879 5 ай бұрын

I just purchased this exact kit can't wait to receive it so i can install it and give it a run !!!!

@SandmanGRE Жыл бұрын

Great video! Very educational for a rookie like myself. Well done!!👏👏👏

@Frobi82 3 жыл бұрын

Just installed it and really excited to test. I let you know. Was pretty easy to install! Greets....

@EemannTech 3 жыл бұрын

thank you very much! good luck!!

@StephanBieker 3 жыл бұрын

I am very satisfied with this kit! Installing wasn't a big deal with 4 hands.

@GummeeH3 8 ай бұрын

OH! SO easy! Having tried some of this on other CZs, it isn't this easy the first time. Once you've done it once or twice it does get easier

@schneir5 3 жыл бұрын

I am definitely going to order that kit, and maybe the dovetail red dot mount too 👍

@lucasardella87 Жыл бұрын

Grazie per la guida 🔝💪🏻

@gerardpersad1607 2 жыл бұрын

Really nice. Keep it up Sir

@Amarse-sw1ok 4 ай бұрын

Great video! Followed the instructions, however I had too many firing failures. So, I put back the original hammer spring, firing pin and spring. Now it works. Trigger creeps a bit (2mm)... Ergo: if you just change the disconnector it works ok. The trigger spring can be kept as a replacement part...

@proy9966 2 жыл бұрын

Just installed on my Shadow 2 with an ultimate trigger. Stock DA of 9 lbs was reduced to 5.5 lbs and SA reduced from 3.5 lbs to 1.3 lbs. Ultimate trigger did not need the pre-travel screw. Very impressed so far.

@dmitrieemann 2 жыл бұрын

Good luck on competitions!

@proy9966 2 жыл бұрын

@@dmitrieemann tested my upgrade Shadow 2 today. Tested with multiple ammo types. Worked flawlessly. Very satisfied Canadian customer. Looking forward to my upcoming IPSC match.

@saudalblaihed3925 3 ай бұрын

Did shorten the reset or do anything to the slight creep after the wall

@proy9966 3 ай бұрын

@@saudalblaihed3925 once you set the set screws there is minimal initial and over travel.

@jensk9767 6 ай бұрын

Great Video, Thanks a lot.

@williamstopforth8179 Жыл бұрын

Thanks Paul

@lawtd 3 жыл бұрын

I just installed on my brand new (2 weeks old/200 round count) Shadow 2. Stock DA was well over 9 lbs on the Wheeler trigger scale (it only goes to 9 lbs max on the calibration), I had to use a luggage scale & got 10.4 lbs. Stock SA was 3.4 lbs. After install it now measures 6.4 lbs on DA & 2.4 lbs on SA. I am very happy, I can't wait to go to the range :) My only concern is the longer firing ping is 2.517 vs my stock that measures 2.463. It might light up the round while slowly dropping the hammer after the load and make ready and lead to a DQ. None of my CGW firings pins exceeded 2.5. I will wait to see tomorrow when I go to the range.

@tinpea 2 жыл бұрын

Hey, did the range trip confirm your suspicions regarding the longer firing pin theory?

@lawtd 2 жыл бұрын

@@tinpea After many club and IPSC matches later, I am very happy to say it has never been an issue. DVC

@roccosuppa2280 2 жыл бұрын

Sei un genio!!👍

@ivan4oo 2 жыл бұрын

Awesome video! I installed the kit today! Never done anything similar before.. I'm getting quite a few SA light strikes though (approx 1 in 10). I see the hammer spring is 8lbs. Do you suggest I get a 10lbs one? Primers are well seated and I tried both Muron and S&B primers. Gun only has about 500 rounds through it.

@KAJBS 2 жыл бұрын

Where did you get that bullet punch from? Thank you for the videos, it made my upgrades easy.

@Speed-shooter 10 ай бұрын

I can’t wait to hear the upgrades for the new shadow 2 compact. I’m assuming trigger and sear springs are the same as the shadow 2? The rest should be olmaga or sp01 stuff. I know the shadow 2 compact comes with a captured recoil spring which I definitely want to change to uncaptured.

@agusbergalio6485 10 ай бұрын

Hi! Excellent video. I just want to ask, if it is similar procedure for the Upgrade Kit ET-130051 for the Shadow 1, thank you!

@vszmey 2 жыл бұрын

Hi, I bought your upgrade kit for my Shadow 2. It works good, however I have one slight issue. I expected that SA trigger would be crisp 1911 style. But even with your upgrade, when I pull the trigger it has two walls. Is it ok and I just expect too much or it just requires some additional fitting? Please, let me know if it can be fitted to get crisp SA and if yes, then could you please point me to the instruction how to do it?

@hendrikg3616 8 күн бұрын

Great video! But why would I want to change the main spring?

@karaesek69 3 жыл бұрын

👍

@choate10 2 жыл бұрын

i was curious on how you can tell what weight your main springs are? i bought a 9 and a 10, they look exactly the same and they both feel heavier than the stock main spring.

@MrKaxid 7 ай бұрын

Will this work basically the same for SP-01 upgrade kit? Loved this but could only find bid for main spring of SP-01. Ty

@KAJBS 2 жыл бұрын

Where did you get the bullet punch from? I can’t find one on Maui

@obelisk0809 3 жыл бұрын

Great video as usual! However after install the upgrade kit, sometimes I will have light strike issue, is it because the main spring too light????

@EemannTech 3 жыл бұрын

yes, on some pistols you need to try heavier main spring

@paulhagiantoniou530 3 жыл бұрын

Or change ammo if possible with softer primers.

@StephanBieker 2 жыл бұрын

@@EemannTech I'm having this issues too. Which one would you recommend?

@dmitrieemann 2 жыл бұрын

@@StephanBieker depends on primers and type of reloading. Try to use next step power main spring 9 lbs

@frankopanklaric 4 ай бұрын

Just to be clear this will make the trigger pull lighter but make it not drop safe?

@angell2792 Жыл бұрын

Paul thank you so much, just completed my shadow 2 upgrade kit just have to wait till you guys get in the barrel :)

@JIBRILSAUTO96 2 жыл бұрын

Is there a kit for shadow 2 Single action only?

@KRescheck Ай бұрын

Hey there, the Trigger Pin is moving to one side of if I use the trigger. Do I have to degrease it or maybe loctite is the solution? Another issue after the first match is that the hammer isnt moving all way back to its rest position.

@UnkoB-jo 2 жыл бұрын

Can you still install the sear spring without the tool?

@brianfranks9227 2 жыл бұрын

I just installed this and now I'm having trouble with the trigger. I'm unable to dry fire the pistol. The trigger and safety was working fine during reassemble when I checked it. The issue started as soon as the upper was added. The issue appears more problematic with single action. At times, 1 out of 20 I can get it to dry fire single action. From that point I can normally dry fire double action without an issue. I've noticed I can sometime dry fire single action by pulling the trigger back beyond the cocked hammer point. Any assistance would be greatly appreciated. I should also mention I'm using the eeman tech straight DA/SA flat trigger. It has been installed for a couple of weeks and has been firing at the range without issue.

@ML-bd5rl Жыл бұрын

Dead trigger. The disconnector needs a little filing down where it hooks into trigger bar. Common issue when changing out disconnector.

@pippy242 4 күн бұрын

I got a Shadow 2 SAO and am wondering if this kit works for it?

@naufalrandy1170 Жыл бұрын

where I can buy this upgrade kit?

@Nonyabusiness911 Ай бұрын

Won’t this just cause misfires. I like the reliability of the gun but would enjoy a lighter da pull.

@thomasnewfield9950 Жыл бұрын

I have successfully installed the kit but now my Shadow 2 has misfire and ejection issues with standard ammo. What went wrong?

@IgorRguez Жыл бұрын

That’s quite normal with standard ammo. If you upgrade your springs to lighter ones, you normally end up reloading your own ammo to suit your new gun needs

@D.s182 Жыл бұрын

Hi Paul, are you in WA.

@freddyvelazquez47 2 жыл бұрын

Can you please help me, I’m having problems installing the sear cage in and the safety will not line up

@dmitrieemann 2 жыл бұрын

when you trying to install safety, if its not fit till the end, just push on left detent to rear side and safety will seat on the place...

@freddyvelazquez47 2 жыл бұрын

@@dmitrieemann thank you for your response, when I install the pin pin , that’s where the sear cage doesn’t go forward and don’t know why it won’t

@eusebiodepasquale Жыл бұрын

scusami ho smontato la mia shadow 2 seguendo il tuo video ed è andato tutto ok, quando ho messo il carrello con la canna e l'asta guida molla, il carrello non arriva fino alla fine perchè? Arriva dopo la metà

@tiagoshootersbest Жыл бұрын

do you have the slide stop well mounted?

@tmL6170 10 ай бұрын

I just installed this set in mine and now the trigger pull is not even 1 kilo!!!! Effed up! What to do? I need it to be 1360gr still.

@andersmartin6751 5 ай бұрын

ipscstore have a +10% trigger return spring, try that one.

@jensentore 4 ай бұрын

Fikk du riktig avtrekksvekt til slutt eller ble den for lett også med +10% ??

@tommacintyre5747 2 жыл бұрын

Where can I buy this kit in Canada?

@dmitrieemann 2 жыл бұрын

Check the CANADA www.eemann-tech.com/dealers/

@epascual47 2 жыл бұрын

Hardball ballistic carry this spring kit.

@dalesimpson8441 3 жыл бұрын

I'm in the USA...Where can I order this Kit??

@paulhagiantoniou530 3 жыл бұрын

Dot 40

@paulhagiantoniou530 3 жыл бұрын

Hard ball ballistics

@R41D Жыл бұрын

The pin holding the disconnector to the hammer, Ive legit Ruined 2 separate punch pin sets trying to whack that factory pin out. im stuck with my install until i can get it out. ive got a punch block and everything it just legit Will not fucking move. any advice?

@mthokozisigift5885 Жыл бұрын

When are you located guys

@EemannTech Жыл бұрын

Estonia

@KRescheck Жыл бұрын

Is the kit production legal?

@dmitrieemann Жыл бұрын

Yes, all parts are allowed by ipsc rules in production or production optics divisions

@KRescheck Жыл бұрын

@@dmitrieemann thanks for your quick reply. Will order one kit now ;)

@IgorRguez Жыл бұрын

It is legal to change your springs BUT based on the single action results (2.11 lbs) this kit may not be legal, no? For Production, isn’t the minimum trigger pull 1.36kg (3lbs)?

@skjalglandsem7440 2 ай бұрын

@@IgorRguez The pull should be EITHER 3lbs at BOTH single and double action, OR 5lbs at double action. With the latter, there is no minimum trigger pull in single action. As long as your double action is 5lbs+ you're good to go 🙂 This is as per "IPSC Handgun Competition Rules - Jan 2019 Edition - Final 30 Dec 2018 (New address)"

@arasethw 5 ай бұрын

I guess My question would be buying a $1000. dollar gun, with a 10lb trigger pull from the factory in the first place ?

@michaeldamore378 5 ай бұрын

I think a stock gun designed for production competition/entry level users is probably designed to shoot off the shelf ammo. Harder primers. If you read down they talk about light strikes and reloading or buying competition specific ammo with softer primers. Heavier springs are more reliable to function. This tuning seems like its for advanced shooters, ready to take those extra steps.

@drepop803 28 күн бұрын

It's 10lbs in double action. Single action is 3-4lbs