How to Make a Bubble Set or Swan neck bend in Conduit

Рет қаралды 37,110

Күн бұрын

If you need to pass conduit over an obstacle, then you'll need to form a crank of bubble set. Sometimes called a swan neck ben. In this video, we run through the techniques and tips to create the perfect conduit bend.
======================
🕐 TIME STAMPS 🕕
======================
00:00 Bubble set or swan neck
00:52 Challenge
01:09 Find the middle of the conduit
02:11 More bend required
03:41 Mark it for bend 2 and 3
04:21 Line up bend 2
05:10 Using a fixed rule
05:44 Finding mark 3
06:22 Position make 3
06:33 Running straight
06:57 Bend 3
07:36 Moment of truth
08:00 Talking a adjustments
================================
🔦 More conduit videos from eFIXX
👉www.efixx.co.uk/metal-conduit
👉www.efixx.co.uk/how-to-bend-co...
👉www.efixx.co.uk/conduit-instal...
==AD=====================================
Series produced in association with
Metpro - Conduit and accessories
👉 hub.efixx.co.uk/metpro
Bend-it-now - Conduit Bender
👉 hub.efixx.co.uk/bend-it-now
=========================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. 👉hub.efixx.co.uk/youtube-subscribe
========================================
⚡️ Take a deep dive into the latest electrical products, applications and technology
👉 hub.efixx.co.uk/essentials
=========================================
🚧 More resources for electrical apprentices and learners
👉 hub.efixx.co.uk/apprentice
=========================================
#efixx #conduit #electrical

Пікірлер: 53

@Mike_5 Жыл бұрын

PVC conduit installers are one thing but proper Galvinised metal conduit is a different world!

@andysims4906 Жыл бұрын

Bit like plumbers . Plastic and copper

@grahamshortt2525 Жыл бұрын

Great video lads . Same Hilmar bending kit but called a saddle set in Ireland and a swan or goose neck is something you do on outside lanterns .

@michaeldavies1755 Жыл бұрын

Good video and good skills. Electricians are required to have lots of technical and practical skills honed over years to earn yhe same money as decorators

@stefangiurgila7807 Жыл бұрын

Haha yeah

@mij.londoner 2 жыл бұрын

A great bubble set video . Thanks for sharing My fav Elec channel.

@efixx 2 жыл бұрын

😍

@joanofarc708 Жыл бұрын

Thanks for sharing i must try this

@Xlanzilla 7 ай бұрын

The back bends would be half of the angle of the initial bend. If you have a angle gauge on your former you can get a good approximation.

@dja.selekta 2 ай бұрын

Quality Guv. Thanks

@DasTwigster 7 ай бұрын

great head up... thanks.

@rogerbradbury9713 4 ай бұрын

It's been 30 years since I did this, but I would mark the 20mm tube in three places before I bent it. The marks being (I think) at 125mm spacings for a bubble set over another 20mm conduit. I'd then line each mark up in turn relative to the hacksawed marker groove that you'll find on nearly every former, then make each bend in turn. One mark would be against the groove, the other two offset from the groove by different amounts. This gave me a symmetrical bend with each mark in the middle of its bend. I would check for alignment against a handy door frame; there's usually one nearby when surface conduit is being installed. I much prefer these Hilmar benders to any other. I remember one Hilmar I used was built with round section tubing, not the square section tubing most of us are used to; it must have been a very early version.

@thattoolguy9432 Жыл бұрын

Well done Jake

@Dragon-Slay3r 3 ай бұрын

This is why they trying to literally take me out and then say it was welldone 😭 Is this because I ate the long kebab side and the short skinny side is in the Thor bin and they used aunty as a cover for it

@Dragon-Slay3r 3 ай бұрын

They they used a seagul to make a short paper clip behind the swan centre flats which took cover from hair straightner few months ago then so the signature bumble “spell” can be used to cover the will situation and they used a double surname of sajdah to cover death row records situation which was masked with basketball outside 3 years ago situation and a different cat left next door due to outsoor burger situation

@MrUtube1916 2 жыл бұрын

Would yous do a video on a 4 piece bridge bend? Aka handle bars? Cheers

@alanmarriott9216 Жыл бұрын

Great video but can I ask. On site there very rarely is a desk or work bench available so any tips on striking the line for bends would be much appreciated.

@dexwhitmore 11 ай бұрын

use what you have; spirit level, speed square, edge of a workbench or toolbox

@impactvision Жыл бұрын

A swan neck is a completely different bend, generally to drop into loop in/out boxes or go round external 90's without having to chase out the blockwork.

@williamcuthbertson4903 Жыл бұрын

I love these videos. They're helpful. However, on a massive industrial site, I've found applying the techniques much more challenging to the point of not doing it the ways shown in your videos.

@efixx Жыл бұрын

Thanks 👍🏻

@matthewcampbell9956 Жыл бұрын

Lmao they only read the first 2 sentences 😂

@markbrookes9919 Жыл бұрын

Question : I’ve been told that in the AM2s and e , that there has to be a 25mm clearance between the bubble set and the pipe work it is going over. Can you help clarify please. Thankyou

@charletonzimmerman4205 Жыл бұрын

In the USA, North America, we "Electricians", call it a "3-Point" saddle, one 45 degree, with both side, 22 1/2, @ ends. or 15, 30, 15.

@shanemcredmond9751 9 ай бұрын

Thanks for the helpful video. Just one question. You state, the first mark is approximate. How do we get an exact measurement for the center of the bubble. For example if i need to measure 800 mm from the back of bend to center of obstacle.

@eanan00 7 ай бұрын

Did you find out the answer?

@shanemcredmond9751 7 ай бұрын

@@eanan00 no, I can get it pretty good by just guessing, but I'd like to have an exact method

@ThePUTNON Жыл бұрын

Can you show how to do bridge set please

@benmanning5789 3 ай бұрын

Could you indicate exactly where you need to line the black mark up on the bender please for the different types of bends?

@Crissecrisse98 Жыл бұрын

Usually my first center bend is 45 degrees and the 2 other one are 22,5 degrees

@joanofarc708 Жыл бұрын

This seems to be a better way

@brendanosullivan2484 5 ай бұрын

Then to find the distance between the center you need to find the Hypotenuse, which is the opposite (distance of jump (50mm in this case)), divided by sin ((angle(which is 22.5)). So here it is Hyp = Opp/sin22.5 => Hyp = 50/.38 ==> 130mm....

@abscomm 2 жыл бұрын

How do you set the tipex marks if you don't have an inclinometer? Also, using a ruler that bends could give you some issues, but if you rotated it 90 and used its edge rather than its face you may have better results.

@dexwhitmore 11 ай бұрын

spirit level with a 45 degree vial. Inclinometer is just a fancy spirit level

@Dibbo1979 6 ай бұрын

Great to see proper electrical work, anyone can house bash. When i sat the 18th the lecturer and other pupils were all house bashers, what a load of shite.

@shinyjohn6568 2 ай бұрын

when you establish your first bend can't you put a reference mark where you handle stops on the base frame so all the bends are exactly the same... if that makes any sense 😕

@2feetaguywith Жыл бұрын

Do you have metal pipe like EMT over here in the states? Do you use that bender for both?

@sparkykevboss Жыл бұрын

No just this thicker walled stuff. It's the same old conduit as 60 years ago. Hopefully one day we'll get something inbetween pvc and steel like a light gauge steel with push fit fittings and steel clip in saddles. Come on manufacturers it's 2023 next week.

@arputharajr7842 2 жыл бұрын

Please explain to Metal trunking cutting different shape

@efixx Жыл бұрын

coming soon!

@joemoore9991 Жыл бұрын

That is a big bubble mind. Usually just jump over another conduit

@mpalaskokkalis1476 Жыл бұрын

Perfect electric

@N-hunter Жыл бұрын

Called a three point saddle in the US. We do simple calculations and mark conduit first, then use a hand bender. Seems much simpler and more accurate than this method

@alfredoowns12 Жыл бұрын

Bro, my thought exactly. Regardless if it's emt or rigid conduit hand benders are way more practical for use in the field. Especially when we are running 100'-300' of raceway a day. Definitely appreciate the American conduit bending practices.

@alasdairmacleod5638 Жыл бұрын

You'd need a pretty solid hand bender to do 25mm galv 😅

@jparagallo 9 ай бұрын

@@alasdairmacleod5638 over here we call it 1”, and yes we have a hand bender for it